Recherche avancée

Sur d’autres sites (6083)

• ffmpeg : How to limit bit rate of video output ?

  27 mars 2017, par Mat

  To a 2GB raw video file taken in front of a greenscreen I want to add the alpha channel.

  My problem is : the output files appear much too large to me (about 20-fold the size of the input), and OpenShot, the video editor, seems unable to handle such huge files. Comparing file properties of input and output shows bitrates of about 15k in the infiles, and 150k-250k in the result files, which seems to pinpoint the problem.

  (By the way, I also want to discard the first part of the clip as well as its audio channel and reduce the frame rate from 30 to 24 fps in the process, which all works fine.)

  This is my command :

  ffmpeg.exe -i  -vf chromakey=0x007d06:0.15:0.0 -ss 40.420 -r 24 -b:v 15840k -maxrate 15840k -bufsize 15840k -an -c:v <encoder> 
  
  </encoder>

  The parameters as I understand them :

  -i  ... infile
  
  -vf chromakey=0x007d06:0.15:0.0 ... chroma, tolerance & blend of greenscreens
  
  -ss 40.420 ... skip before second 40.420 (this works)
  
  -r 24 ... frame rate (this works, too)
  
  -b:v 15804k ... bitrate (seemingly no effect)
  
  -maxrate 15840k ... maximum BitRate (seemingly no effect)
  
  -bufzise 15840k ... Buffer size (can't tell)
  
  -an ... no audio channel (works fine)
  
  -c:v <encoder> ... Video Encoder (ffvhuff, png, qtrle and tiff were tried, all to the same result)
  
   ... outfile
  
  </encoder>

  b, maxrate and bufsize are described as global options. No matter what setting, during the process bitrates of up to some 3000000kbits/s (tiff) are reported.

  (I also added -pixel_format argb, but this, too, seemed to be ignored, ffmpeg always reports to write yuva420p.)

  What am I missing ?

• How to record the bluetooth audio from my phone in my pc using ffmpeg ?

  12 septembre 2023, par Juan Inzunza

  I have my phone connected via Bluetooth to my PC and playing audio in my phone so i can hear that audio in my pc and i was trying to record that audio in my PC using ffmpeg this is the command i got so far

  


  ffmpeg -f pulse -ac 1 -ar 44100 -i alsa_input.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.mono-fallback -f pulse -ac 2 -ar 44100 -i bluez_source.84_5F_04_75_B9_F6.a2dp_source -filter_complex amix=inputs=2 -i /dev/video5 -s 640x480 -vcodec libx264 -preset veryfast -crf 18 -acodec libmp3lame -ar 44100 -q:a 1 -pix_fmt yuv420p -aq 0 ~/Videos


  


  "bluez_source.84_5F_04_75_B9_F6.a2dp_source" is the name of the bluetooth audio source (my phone) but the problem is, if i am not playing audio on the device, just disappears when i execute this command "pactl list sources", and appears again when i play audio, so is listed when i run "pactl list sources" and i have to keep the phone playing audio so ffmpeg recognizes that device and not fail when executed.

  


  Finally my question is how can i keep that device in running state or suspended state without need to play audio all the time.

  


  gandalf@Mordor:~$ pactl list sources
Source #64
    State: IDLE
    Name: alsa_output.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.analog-stereo.monitor
    Description: Monitor of KT USB Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 85
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.analog-stereo
    Latency: 0 usec, configured 2000000 usec
    Flags: DECIBEL_VOLUME LATENCY 
    Properties:
        device.description = "Monitor of KT USB Audio Analog Stereo"
        device.class = "monitor"
        alsa.card = "1"
        alsa.card_name = "KT USB Audio"
        alsa.long_card_name = "KTMicro KT USB Audio at usb-0000:03:00.3-3, full speed"
        alsa.driver_name = "snd_usb_audio"
        device.bus_path = "pci-0000:03:00.3-usb-0:3:1.0"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/sound/card1"
        udev.id = "usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00"
        device.bus = "usb"
        device.vendor.id = "12d1"
        device.vendor.name = "Huawei Technologies Co., Ltd."
        device.product.id = "0010"
        device.product.name = "KT USB Audio"
        device.serial = "KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000-"
        device.string = "1"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-usb"
    Formats:
        pcm

Source #65
    State: SUSPENDED
    Name: alsa_input.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.mono-fallback
    Description: KT USB Audio Mono
    Driver: module-alsa-card.c
    Sample Specification: s16le 1ch 44100Hz
    Channel Map: mono
    Owner Module: 85
    Mute: no
    Volume: mono: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: n/a
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
    Properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "USB Audio"
        alsa.id = "USB Audio"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "1"
        alsa.card_name = "KT USB Audio"
        alsa.long_card_name = "KTMicro KT USB Audio at usb-0000:03:00.3-3, full speed"
        alsa.driver_name = "snd_usb_audio"
        device.bus_path = "pci-0000:03:00.3-usb-0:3:1.0"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/sound/card1"
        udev.id = "usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00"
        device.bus = "usb"
        device.vendor.id = "12d1"
        device.vendor.name = "Huawei Technologies Co., Ltd."
        device.product.id = "0010"
        device.product.name = "KT USB Audio"
        device.serial = "KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000-"
        device.string = "hw:1"
        device.buffering.buffer_size = "176400"
        device.buffering.fragment_size = "88200"
        device.access_mode = "mmap+timer"
        device.profile.name = "mono-fallback"
        device.profile.description = "Mono"
        device.description = "KT USB Audio Mono"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-usb"
    Ports:
        analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
    Active Port: analog-input-mic
    Formats:
        pcm

Source #68
    State: RUNNING
    Name: bluez_source.84_5F_04_75_B9_F6.a2dp_source
    Description: Juan's S20 FE
    Driver: module-bluez5-device.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 23
    Mute: no
    Volume: front-left: 53151 /  81% / -5.46 dB,   front-right: 53151 /  81% / -5.46 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: n/a
    Latency: 68928 usec, configured 68537 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY 
    Properties:
        bluetooth.protocol = "a2dp_source"
        bluetooth.codec = "sbc"
        device.description = "Juan's S20 FE"
        device.string = "84:5F:04:75:B9:F6"
        device.api = "bluez"
        device.class = "sound"
        device.bus = "bluetooth"
        device.form_factor = "phone"
        bluez.path = "/org/bluez/hci0/dev_84_5F_04_75_B9_F6"
        bluez.class = "0x5a020c"
        bluez.alias = "Juan's S20 FE"
        device.icon_name = "audio-card-bluetooth"
    Ports:
        phone-input: Phone (type: Phone, priority: 0, available)
    Active Port: phone-input
    Formats:
        pcm


  


  This is the error i am getting when there's no playing audio in my phone.

  


  ffmpeg version 4.4.2-0ubuntu0.22.04.1 Copyright (c) 2000-2021 the FFmpeg developers
  built with gcc 11 (Ubuntu 11.2.0-19ubuntu1)
  configuration: --prefix=/usr --extra-version=0ubuntu0.22.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-pocketsphinx --enable-librsvg --enable-libmfx --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 70.100 / 56. 70.100
  libavcodec     58.134.100 / 58.134.100
  libavformat    58. 76.100 / 58. 76.100
  libavdevice    58. 13.100 / 58. 13.100
  libavfilter     7.110.100 /  7.110.100
  libswscale      5.  9.100 /  5.  9.100
  libswresample   3.  9.100 /  3.  9.100
  libpostproc    55.  9.100 / 55.  9.100
Guessed Channel Layout for Input Stream #0.0 : mono
Input #0, pulse, from 'alsa_input.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.mono-fallback':
  Duration: N/A, start: 1694557964.268337, bitrate: 705 kb/s
  Stream #0:0: Audio: pcm_s16le, 44100 Hz, mono, s16, 705 kb/s
bluez_source.84_5F_04_75_B9_F6.a2dp_source: Input/output error



  


• ffprobe : fix XML rendering, review XML layout

  13 octobre 2023, par Stefano Sabatini

  ffprobe : fix XML rendering, review XML layout
  Fix rendering of int values within a side data element, which was
  
  broken since commit d2d3a83ad93, where the side data element was
  
  correctly marked as a variable fields element. Logic to render a
  
  string variable was implemented already, but it was not implemented
  
  for the int fields path, which was enabled by that commit.
  Also, code and schema is changed in order to account for multiple
  
  variable-fields elements - such as side data, contained within the
  
  same parent. Previously it was assumed that a single variable-fields
  
  element was contained within the parent, which was the case for tags,
  
  but is not the case for side-data.
  Previously data was rendered as :
  
  <side_data_list>
  
      <side_data side_data_type="CPB properties" max_bitrate="0" min_bitrate="0" avg_bitrate="0" buffer_size="327680" vbv_delay="-1"/>
  
  </side_data_list>
  Now as :
  
  <side_data_list>
  
     <side_data type="CPB properties">
  
         <side_datum key="side_data_type" value="CPB properties"/>
  
         <side_datum key="max_bitrate" value="0"/>
  
         <side_datum key="min_bitrate" value="0"/>
  
         <side_datum key="avg_bitrate" value="0"/>
  
         <side_datum key="buffer_size" value="49152"/>
  
         <side_datum key="vbv_delay" value="-1"/>
  
     </side_data>
  
  </side_data_list>
  Variable-fields elements are rendered as a containing element wrapping
  
  generic key/values elements, enabling use of strict XML schema.
  Fix trac issue :
  
  https://trac.ffmpeg.org/ticket/10613
  

  • [DH] Changelog
  • [DH] doc/ffprobe.xsd
  • [DH] fftools/ffprobe.c
  • [DH] tests/ref/fate/ffprobe_xml
  • [DH] tests/ref/fate/ffprobe_xsd
  • [DH] tests/ref/fate/flv-demux
  • [DH] tests/ref/fate/gapless-mp3-side-data
  • [DH] tests/ref/fate/mov-aac-2048-priming
  • [DH] tests/ref/fate/mov-zombie
  • [DH] tests/ref/fate/oggopus-demux
  • [DH] tests/ref/fate/ts-demux
  • [DH] tests/ref/fate/ts-opus-demux
  • [DH] tests/ref/fate/ts-small-demux
  • [DH] tests/ref/fate/ts-timed-id3-demux