Recherche avancée

Sur d’autres sites (5826)

• Long Overdue MediaWiki Upgrade

  5 février 2014, par Multimedia Mike — General

  What do I do ? What I do ? This library book is 42 years overdue !
  I admit that it’s mine, yet I can’t pay the fine,
  Should I turn it in or should I hide it again ?
  What do I do ? What do I do ?

  I internalized the forgoing paean to the perils of procrastination by Shel Silverstein in my formative years. It’s probably why I’ve never paid a single cent in late fees in my entire life.

  However, I have been woefully negligent as the steward of the MediaWiki software that drives the world famous MultimediaWiki, the internet’s central repository of obscure technical knowledge related to multimedia. It is currently running of version 1.6 software. The latest version is 1.22.

  The Story So Far
  According to my records, I first set up the wiki late in 2005. I don’t know which MediaWiki release I was using at the time. I probably conducted a few upgrades in the early days, but that went by the wayside perhaps in 2007. My web host stopped allowing shell access and the MediaWiki upgrade process pretty much requires running a PHP script from a command line. Upgrade time came around and I put off the project. Weeks turned into months turned into years until, according to some notes, the wiki abruptly stopped working in July, 2011. Suddenly, there were PHP errors about “Namespace” being a reserved word.

  While I finally laid out a plan to upgrade the wiki after all these years, I eventually found that the problem had been caused when my webhost upgraded from PHP 5.2 -> 5.3. I also learned of a small number of code changes that caused the problem to go away, thus kicking the can down the road once more.

  Then a new problem showed up last week. I think it might be related to a new version of PHP again. This time, a few other things on my site broke, and I learned that my webhost now allows me to select a PHP version to use (with the version then set to “auto”, which didn’t yield much information). Rolling back to an earlier version of PHP might have solved the problem easily.

  But NO ! I made the determination that this goes no further. I want this wiki upgraded.

  The Arduous Upgrade Path
  There are 2 general upgrade paths I can think of :
  

  1. Upgrade in place on the server
  2. Upgrade offline and put the site back on the server

  Approach #1 is problematic since I don’t have direct shell access, though I considered using something like PHP Shell. Approach #2 involves getting the entire set of wiki files and a backup of the MySQL tables. This is workable since I keep automated backups of these items anyway.

  In fairly short order, I was able to set up a working copy of the MultimediaWiki hosted on a local Linux machine. Now what’s the move ? The MediaWiki software I’m running is 1.6.10. The very latest, as of this upgrade project is 1.22.2. I suppose it’s way too much to hope that the software will upgrade cleanly from 1.6.x straight to 1.22.x, but I guess it’s worth a shot…

  HA ! No chance. Okay, next idea is to march through the various versions and upgrade each in turn. MediaWiki has all their historic releases online, all the way back to the 1.3 lineage. I decided that the latest of each lineage should upgrade cleanly from anything in the previous version of lineage. E.g., 1.6.10 should upgrade cleanly to 1.7.3 (last in the 1.7 series). This seemed to be a workable strategy. So I downloaded the latest of each series, unpacked, and copied all the wiki files over the working installation and ran ‘php update.php’ in the maintenance/ directory.

  The process is tedious and not without its obstacles. I consider this penance for my years of wiki neglect. First, I run into the “PHP Parse error : syntax error, unexpected T_NAMESPACE, expecting T_STRING” issue, the same that I saw years ago after the webhost transitioned from PHP 5.2 -> 5.3. I could solve this by editing assorted files and changing “Namespace” -> “MWNamespace” (which is what MediaWiki did by version 1.13). But I would prefer not to.

  Instead, I downloaded the source for PHP 5.2 and compiled it in a separate directory, then called ‘/path/to/php/5.2/bin/php update.php’. Problem solved.

  The next problem is that a bunch of the database update scripts are specifying “Type=InnoDB”. This isn’t supported by modern MySQL databases. Now, it’s “Engine=InnoDB”. A quick search & replace at the command line fixes this for 1.6.x… and 1.7.x… and 1.8 through 1.12. Finally, at 1.13, it was no longer necessary. As a bonus, at 1.13, I was able to test the installation since Namespace had been renamed to MWNamespace. I would later learn that the table type modifications probably could have been simplified in by changing “$wgDBmysql4 = true ;” to “$wgDBmysql5 = true ;” somewhere in LocalSettings.php.

  Command line upgrading worked smoothly up through 1.18 series when I got a new syntax error :

  <br />
PHP Fatal error:  Call to a member function addMessages() on a non-object in /mnt/sdb1/archive/wiki/extensions/Cite.php on line 68<br />

  Best I could do was comment out that line. I hope that doesn’t break anything important.

  In the home stretch, the very last transition (1.21 -> 1.22) failed :

  PHP Fatal error :  Cannot redeclare wfProfileIn() (previously declared in 
  /mnt/sdb1/archive/wiki/includes/profiler/Profiler.php:33) in 
  /mnt/sdb1/archive/wiki/includes/ProfilerStub.php on line 25
  

  Apparently, this problem arises occasionally since 1.18. I found a way around it thanks to this page : Deleted the file StartProfiler.php. Who am I to argue ?

  Upon completing the transition to 1.22, the wiki doesn’t look correct– the pictures aren’t showing up. The solution was to fix the temporary directory via LocalSettings.php.

  Back To Production
  Okay, it all works again ! Locally, that is. How to get it back to the server ? My first idea was that, knowing that this upgrade process can succeed, try stepping through the upgrade process again, but tell the update.php scripts to access the database tables on multimedia.cx. This seemed to be working for awhile, even though the database update phase often took 4-5 minutes. However, the transition from 1.8.5 -> 1.9.6 took 75 minutes and then timed out. According to my notes, “This isn’t going to work.”

  The new process :

  1. Dump the database tables from the local database.
  2. Create a new database remotely (melanson_wiki_ng).
  3. Dump the database table into melanson_wiki_ng.
  4. Move the index.php file out of the wiki files directory temporarily (or rename).
  5. Modify the LocalSettings.php to talk to the new database.
  6. Perform a lftp mirror operation in order to send all the files up to the server.
  7. Send the index.php file and hope beyond hope that everything magically works.

  And that’s the story of how the updated MultimediaWiki came back online. Despite the database dump file being over 110 MB, it only tool MySQL 1m45s to transmit it all to the remote server (let’s hear it for the ‘–compress’ option). For comparison, inserting the tables back into a fresh local database took 1m07s.

  When the MultimediaWiki was first live again, it loaded, but ever so slowly. This is when I finally looked into optimization and found that I was lacking any caching. So as a bonus, the MultimediaWiki should be much faster now.

  Going Forward
  For all I know, I did everything described here in the hardest way possible. But at least I got it done. Unless I learn of a better process, future upgrades will probably look similar to this.

  Additionally, I should probably take some time to figure out what new features are part of the standard MediaWiki distribution nowadays.

• WebVTT Discussions at FOMS

  1er janvier 2014, par silvia

  At the recent FOMS (Foundations of Open Media Software and Standards) Developer Workshop, we had a massive focus on WebVTT and the state of its feature set. You will find links to summaries of the individual discussions in the FOMS Schedule page. Here are some of the key results I went away with.

  1. WebVTT Regions

  The key driving force for improvements to WebVTT continues to be the accurate representation of CEA608/708 captioning. As part of that drive, we’ve introduced regions (the CEA708 “window” concept) to WebVTT. WebVTT regions satisfy multiple requirements of CEA608/708 captions :

  1. support for rollup captions
  2. support for background color and border color on a group of cues independent of the background color of the individual cue
  3. possibility to move a group of cues from one location on screen to a different
  4. support to specify an anchor point and a growth direction for cues when their text size changes
  5. support for specifying a fixed number of lines to be rendered
  6. possibility to specify which region is rendered in front of which other one when regions overlap

  While WebVTT regions enable us to satisfy all of the above points, the specification isn’t actually complete yet and some of the above needs aren’t satisfied yet.

  We have an open bug to move a region elsewhere. A first discussion at FOMS seemed to to indicate that we’ll have to add syntax for updating a region at a particular time and thus give region definitions a way to be valid only for a certain time frame. I can imagine that the region definitions that we have in the header of the WebVTT file now would have an implicitly defined time frame from the start to the end of the file, but can be overruled by a re-definition anywhere within the WebVTT file. That redefinition needs to provide a start and end time.

  We registered a bug to add specifying the width and height of regions (and possibly of cues) by em (i.e. by multiples of the largest character in a font). This should allow us to have the region grow/shrink around the region anchor point with a change of font size by script or a user. em specifications should also be applied to cues – that matches the column count of CEA708/608 better.

  When regions overlap, the original region extension spec already suggested a “layer” cue setting. It will be easy to add it.

  Another change that we will ultimately need is the “scroll” setting : we will need to introduce support for scrolling text down or from left-to-right or right-to-left, e.g. vertical scrolling text seems to be used in some Chinese caption use cases.

  2. Unify Rendering Approach

  The introduction of regions created a second code path in the rendering spec with some duplication. At FOMS we discussed if it was possible to unify that. The suggestion is to render all cues into a region. Those that are not part of a region would be rendered into an anonymous region that covers the complete viewport. There may be some consequences to this, e.g. cue settings should be usable across all cues, no matter whether or not part of a region, and avoiding cue overlap may need to be done within regions.

  Here’s a rough outline of the path of the new rendering algorithm :

  (1) Render the regions :

  Specified Region	Anonymous Region
  Render values as given :	Render following values :
  width lines regionanchor viewportanchor scroll	100% videoheight/lineheight 0,0 0,0 none

  (2) Render the cues :

  • Create a cue box and put it in its region (anonymous if none given).
  • Calculate position & size of cue box from cue settings (position, line, size).
  • Calculate position of cue text inside cue box from remaining cue settings (vertical, align).

  3. Vertical Features

  WebVTT includes vertical rendering, both right-to-left and left-to-right. However, regions are not defined for vertical. Eventually, we’re going to have to look at the vertical features of WebVTT with more details and figure out whether the spec is working for them and what real-world requirements we have missed. We hope we can get some help from users in countries where vertically rendered captions/subtitles are the norm.

  4. Best Practices

  Some of he WebVTT users at FOMS suggested it would be advantageous to start a list of “best practices” for how to author captions with WebVTT. Example recommendations are :

  • Use line numbers only to position cues from top or bottom of viewport. Don’t use otherwise.
  • Note that when the user increases the fontsize in rollup captions and thus introduces new line breaks, your cues will roll by faster because the number of lines of a rollup is fixed.
  • Make sure to use &lrm ; and &rlm ; UTF-8 markers to control the directionality of your text.

  It would be nice if somebody started such a document.

  5. Non-caption use cases

  Instead of continuing to look back and improve our support of captions/subtitles in WebVTT, one session at FOMS also went ahead and looked forward to other use cases. The following requirements came out of this :

  5.1 Preview Thumbnails

  A common use case for timed data is the use of preview thumbnails on the navigation bar of videos. A native implementation of preview thumbnails would allow crawlers and search engines to have a standardised way of extracting timed images for media files, so introduction of a new @kind value “thumbnails” was suggested.

  The content of a “thumbnails” cue could be any of :

  • an image URL
  • a sprite URL to a single image
  • a spatial & temporal media fragment URL to a media resource
  • base64 encoded image (data URI)
  • an iframe offset to the media resource

  The suggestion is to allow anything that would work in a img @src attribute as value in a cue of @kind=”thumbnails”. Responsive images might also be useful for a track of @kind=”thumbnails”. It may even be possible to define an inband thumbnail track based on the track of @kind=”thumbnails”. Such cues should also work in the JavaScript track API.

  5.2 Chapter markers

  There is interest to put richer content than just a chapter title into chapter cues. Often, chapters consist of a title, text and and image. The text is not so important, but the image is used almost everywhere that chapters are used. There may be a need to extend chapter cue content with images, similar to what a @kind=”thumbnails” track offers.

  The conclusion that we arrived at was that we need to make @kind=”thumbnails” work first and then look at using the learnings from that to extend @kind=”chapters”.

  5.3 Inband tracks for live video

  A difficult topic was opened with the question of how to transport text tracks in live video. In live captioning, end times are never created for cues, but are implied by the start time of the next cue. This is a use case that hasn’t been addressed in HTML5/WebVTT yet. An old proposal to allow a special end time value of “NEXT” was discussed and recommended for adoption. Also, there was support for the spec change that stops blocking loading VTT until all cues have been loaded.

  5.4 Cross-domain VTT loading

  A brief discussion centered around the fact that the spec disallows cross-domain loading of WebVTT files, but that no browser implements this. This needs to be discussion at the HTML WG level.

  6. Regions in live captioning

  The final topic that we discussed was how we could provide support for regions in live captioning.

  • The currently active region definitions will need to be come part of every header of every VTT file segment that HLS uses, so it’s available in case the cues in the segment file reference it.
  • “NEXT” in end time markers would make authoring of live captioned VTT files easier.
  • If the application wants to use 1 word at a time and doesn’t want to delay sending the word until the full cue is authored (e.g. in a Hangout type environment), we will need to introduce the concept of “cue continuation markers”, so we know that a cue could be extended with the next VTT file fragment.

  This is an extensive and impressive amount of discussion around WebVTT and a lot of new work to be performed in the future. I’m very grateful for all the people who have contributed to these discussions at FOMS and will hopefully continue to help get the specifications right.

• FFmpeg converted mp4 file fails to load in Quicktime

  21 décembre 2015, par wonea

  I’ve been using FFmpeg to convert a movie I need to play in MP4, however in Quicktime the following error is presented ;

  

  (Error -2041 : an invalid sample description was found in the movie (output.mp4)).

  I used the following FFmpeg command parameters to convert the file ;

  C :\Temp\EOBTemp>ffmpeg -i input.mp4 -y
  -acodec libmp3lame -ab 96k -vcodec libx264 -vpre lossless_slow -crf 22
  -threads 0 output.mp4

  Now this file plays absolutely fine, in Windows Media Player, and VideoLAN (FFmpeg based, so no surprise here. I using the latest build from HawkEye’s FFmpeg Windows Builds
  (FFmpeg git-a304071 32-bit Static (Latest)).

  I really hope this isn’t a AAC problem, as I’ve been trying to get FFmpeg to use the libfaac.dll library (in the same folder as the FFmpeg.exe) with the command ;

  -acodec libfaac

  Help ! I’m at a loss !