Recherche avancée

Médias (1)

Mot : - Tags -/embed

Autres articles (66)

  • Publier sur MédiaSpip

    13 juin 2013

    Puis-je poster des contenus à partir d’une tablette Ipad ?
    Oui, si votre Médiaspip installé est à la version 0.2 ou supérieure. Contacter au besoin l’administrateur de votre MédiaSpip pour le savoir

  • HTML5 audio and video support

    13 avril 2011, par

    MediaSPIP uses HTML5 video and audio tags to play multimedia files, taking advantage of the latest W3C innovations supported by modern browsers.
    The MediaSPIP player used has been created specifically for MediaSPIP and can be easily adapted to fit in with a specific theme.
    For older browsers the Flowplayer flash fallback is used.
    MediaSPIP allows for media playback on major mobile platforms with the above (...)

  • Support audio et vidéo HTML5

    10 avril 2011

    MediaSPIP utilise les balises HTML5 video et audio pour la lecture de documents multimedia en profitant des dernières innovations du W3C supportées par les navigateurs modernes.
    Pour les navigateurs plus anciens, le lecteur flash Flowplayer est utilisé.
    Le lecteur HTML5 utilisé a été spécifiquement créé pour MediaSPIP : il est complètement modifiable graphiquement pour correspondre à un thème choisi.
    Ces technologies permettent de distribuer vidéo et son à la fois sur des ordinateurs conventionnels (...)

Sur d’autres sites (5893)

  • What is causing "unspecified pixel format" and "Error opening filters !" error in ffmpeg ?

    19 février 2019, par SJAndersonLA

    I’m writing an mp4 to HLS transcoding process that works as intended on files smaller than 7 gigabytes (sample size is 100 videos). When attempting to transcode anything larger than 7GB, it crashes.

    The command :

    ffmpeg 
    
  -i large_file.mp4 -y 
    
  -vf scale=w=1920:h=1080:force_original_aspect_ratio=decrease 
    
  -c:a aac 
    
  -ar 48000 
    
  -c:v h264 
    
  -profile:v main 
    
  -crf 20 
    
  -sc_threshold 0 
    
  -g 48 
    
  -keyint_min 48 
    
  -hls_time 4 
    
  -hls_playlist_type vod 
    
  -b:v 5000k 
    
  -maxrate 5350k 
    
  -bufsize 7500k 
    
  -b:a 192k 
    
  -hls_segment_filename /1080p_%03d.ts 
    
  -threads 0 
    
  /tmp/output-ef42dc65-1d3d-4682-b32b-68d7c712fb9c-raw-test/1080p.m3u8

    The error :

    ffmpeg version 3.2.12-1\x7edeb9u1 Copyright (c) 2000-2018 the FFmpeg developers
    
  built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516
    
  configuration: --prefix=/usr --extra-version='1~deb9u1' --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libebur128 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
    
  libavutil      55. 34.101 / 55. 34.101
    
  libavcodec     57. 64.101 / 57. 64.101
    
  libavformat    57. 56.101 / 57. 56.101
    
  libavdevice    57.  1.100 / 57.  1.100
    
  libavfilter     6. 65.100 /  6. 65.100
    
  libavresample   3.  1.  0 /  3.  1.  0
    
  libswscale      4.  2.100 /  4.  2.100
    
  libswresample   2.  3.100 /  2.  3.100
    
  libpostproc    54.  1.100 / 54.  1.100
    
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x555888d821c0] Could not find codec parameters for stream 0 (Video: h264 (avc1 / 0x31637661), none, 1280x720, 3856 kb/s): unspecified pixel format
    
Consider increasing the value for the 'analyzeduration' and 'probesize' options
    
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'large_file.mp4':
    
  Metadata:
    
    major_brand     : isom
    
    minor_version   : 512
    
    compatible_brands: isomiso2avc1mp41
    
    encoder         : Lavf58.26.101
    
  Duration: 05:56:12.51, start: 0.000000, bitrate: 4061 kb/s
    
    Stream #0:0(und): Video: h264 (avc1 / 0x31637661), none, 1280x720, 3856 kb/s, 29.99 fps, 30 tbr, 100k tbn, 200k tbc (default)
    
    Metadata:
    
      handler_name    : VideoHandler
    
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 194 kb/s (default)
    
    Metadata:
    
      handler_name    : SoundHandler
    
[buffer @ 0x555888d88180] Unable to parse option value "-1" as pixel format
    
    Last message repeated 1 times
    
[buffer @ 0x555888d88180] Error setting option pix_fmt to value -1.
    
[graph 0 input from stream 0:0 @ 0x555888d81e40] Error applying options to the filter.
    
Error opening filters!

    The error says to try increasing analyzeduration and probesize, which I set to max value (based on an answer from this post), however that didn’t seem to change the behavior. I also suspected that the file was corrupted, but the fact that this is failing for all files larger than 7GB makes it more difficult to suggest its something not related to the size of the mp4.

  • need help on solving my ffmpeg command line

    3 avril 2019, par DRMTV

    i create a small bash script to encode 1080p video , the video will be added with watermark at bottom left and i need to add a black padding on top and bottom

    i tried several way but still no luck , i tried -vf and yes it worked but cant use padding and watermark together , and suggest use filter_complex

    if i use this code directly without bash script it work

    time ffmpeg -hide_banner -i transformers.mp4 -i transformers.ass -loop 1 -i watermark.png -loop 1 -i logo.png -map 0:0 -map 0:1 -filter_complex "[0:0]scale=(iw*sar)*min(1920/(iw*sar)\,800/ih):ih*min(1920/(iw*sar)\,800/ih), pad=1920:800:(1920-iw*min(1920/iw\,800/ih))/2:(800-ih*min(1920/iw\,800/ih))/2;ass=transformers.ass[FID1];[FID1][2:v]overlay=10:${WATERMARKPOSITION}:repeatlast=0:enable='between(t,300,600)'[FID3];[3:v]fade=in:st=1200:d=1.6:alpha=1,fade=out:st=107998:d=1.6:alpha=1[FID6];[FID3][FID6]overlay=10:5:repeatlast=0:enable='between(t,1200,187922)'" -c:v libx264 -minrate 1800k -maxrate 1800k -bufsize 3600k -profile:v high -c:a aac -b:a 128k -profile:a aac_main -movflags faststart -strict -2 -f mp4 -y "transformers.mp4"

    but when i include it with my bash script i got this error ,

    [libx264 @ 0x2a063e0] height not divisible by 2 (300x39)
    
Output #0, mp4, to '/movie/Paddy/output/Transformers.Age.of.Extinction.2014.1080p.BluRay.H264.AAC-RARBG.mp4':
    
  Metadata:
    
    major_brand     : isom
    
    minor_version   : 512
    
    compatible_brands: isomiso2avc1mp41
    
    comment         : Transformers.Age.of.Extinction.2014.1080p.BluRay.H264.AAC-RARBG
    
    encoder         : Lavf57.71.100
    
    title           : Transformers Age of Extinction 2014 1080p BluRay H264 AAC-RARBG - Visit us @ Juraganfilm.COM
    
    Stream #0:0: Video: h264 (libx264), yuv420p, 1920x800 [SAR 1:1 DAR 12:5], q=-1--1, max. 2300 kb/s, 23.98 fps, 23.98 tbn, 23.98 tbc
    
    Metadata:
    
      encoder         : Lavc56.60.100 libx264
    
    Stream #0:1: Video: h264, none, q=2-31, 128 kb/s, SAR 1:1 DAR 0:0, 25 fps
    
    Metadata:
    
      encoder         : Lavc56.60.100 libx264
    
    Stream #0:2(eng): Audio: aac, 0 channels, 128 kb/s (default)
    
    Metadata:
    
      creation_time   : 2017-12-19 07:58:39
    
      handler_name    : SoundHandler
    
      encoder         : Lavc56.60.100 aac
    
Stream mapping:
    
  Stream #0:0 (h264) -> scale (graph 0)
    
  Stream #0:0 (h264) -> overlay:overlay (graph 0)
    
  Stream #2:0 (png) -> ass (graph 0)
    
  Stream #3:0 (png) -> fade (graph 0)
    
  pad (graph 0) -> Stream #0:0 (libx264)
    
  overlay (graph 0) -> Stream #0:1 (libx264)
    
  Stream #0:1 -> #0:2 (aac (native) -> aac (native))
    
Error while opening encoder for output stream #0:1 - maybe incorrect parameters such as bit_rate, rate, width or height

    and below is the script i have been working on

    output="/movie/output"
    

    
FILESDIR=`find $PWD -type f -regex ".*\.\(mp4\|mkv\|avi\)" | sed 's@.*/@@' | sort -n`
    
for video in $FILESDIR
    
do
    

    
MOVIETITLE=${video%.*}
    
INFOVID=${MOVIETITLE//./ }
    
BITRATE="${HEIGHT}"
    
WIDTH=$(ffprobe -v error -select_streams v:0 -show_entries stream=width,height -of csv=s=x:p=0 ${video} 2>&1 | sed -e 's|\[.*||g' | sed ':a;N;$!ba;s/\n//g' | sed -e 's|x.*||g')
    
HEIGHT=$(ffprobe -v error -select_streams v:0 -show_entries stream=width,height -of csv=s=x:p=0 ${video} | sed -e 's/.*x//')
    
WATERMARKPOSITION=$(expr $HEIGHT - 50)
    
VIDEOMAP=$(ffmpeg -i $video 2>&1 | grep "Stream #" | grep Video | sed -e "s|.*\#||g" | sed -e "s|: Video.*||g" | sed -e "s|(.*||g")
    
AUDIOMAP=$(ffmpeg -i $video 2>&1 | grep "Stream #" | grep Audio | sed -e "s|.*\#||g" | sed -e "s|: Audio.*||g" | sed -e "s|(.*||g")
    
MAXRATE=$(expr $BITRATE + 500)
    
BUFFSIZE=$(expr $MAXRATE \* 2)
    

    
time ffmpeg -hide_banner -i $video -i $MOVIETITLE.ass -loop 1 -i $WATERMARK -loop 1 -i $LOGO -map ${VIDEOMAP} -map ${AUDIOMAP} -filter_complex "[${VIDEOMAP}]scale=(iw*sar)*min(${WIDTH}/(iw*sar)\,${HEIGHT}/ih):ih*min(${WIDTH}/(iw*sar)\,${HEIGHT}/ih), pad=${WIDTH}:${HEIGHT}:(${WIDTH}-iw*min(${WIDTH}/iw\,${HEIGHT}/ih))/2:(${HEIGHT}-ih*min(${WIDTH}/iw\,${HEIGHT}/ih))/2;ass=$MOVIETITLE.ass[FID1];[FID1][2:v]overlay=10:${WATERMARKPOSITION}:repeatlast=0:enable='between(t,300,600)'[FID3];[3:v]fade=in:st=1200:d=1.6:alpha=1,fade=out:st=107998:d=1.6:alpha=1[FID6];[FID3][FID6]overlay=10:5:repeatlast=0:enable='between(t,1200,187922)'" -c:v libx264 -minrate ${BITRATE}k -maxrate ${MAXRATE}k -bufsize ${BUFFSIZE}k -profile:v high -c:a aac -b:a 128k -profile:a aac_main -movflags faststart -strict -2 -f mp4 -y "${output}/$MOVIETITLE.mp4"
    
done

    has been working all day and still i cant make it to work.

    can someone guide me which part is wrong ?

  • Package not found - add libav to PKG_CONFIG_PATH environment variable

    19 mars 2019, par Brayton Larson

    I am attempting to build the Parrot SDK and when running the command it continuously fails due to multiple libav package variants not being found. Below is the error message.

    user@TheMysteriousMachine : /WORKING_DIRECTORY$ ./build.sh -p arsdk-native -t build-sdk -j
    [I] Starting task 'build-sdk'
    [I] In '/home/user/WORKING_DIRECTORY' :   ALCHEMY_TARGET_CONFIG_DIR="/home/user/WORKING_DIRECTORY/products/arsdk  /native/config" ALCHEMY_TARGET_OUT="/home/user/WORKING_DIRECTORY/out/arsdk-native" ALCHEMY_TARGET_PRODUCT="arsdk" ALCHEMY_TARGET_PRODUCT_VARIANT="native" ALCHEMY_TARGET_SCAN_ADD_DIRS=" /home/user/WORKING_DIRECTORY/packages" ALCHEMY_TARGET_SCAN_PRUNE_DIRS=" /home/user/WORKING_DIRECTORY" ALCHEMY_USE_COLORS="1" ALCHEMY_WORKSPACE_DIR="/home/user/WORKING_DIRECTORY" PARROT_BUILD_PROP_GROUP="drones" PARROT_BUILD_PROP_PRODUCT="arsdk" PARROT_BUILD_PROP_PROJECT="arsdk" PARROT_BUILD_PROP_UID="arsdk-native-20190316-1404-0.0.0" PARROT_BUILD_PROP_VARIANT="native" PARROT_BUILD_PROP_VERSION="0.0.0" /home/user/WORKING_DIRECTORY/build/alchemy/scripts/alchemake -j 8 all
    ----------------------------------------------------------------------
    + ALCHEMY_WORKSPACE_DIR = /home/user /WORKING_DIRECTORY
    + TARGET_PRODUCT = arsdk
    + TARGET_PRODUCT_VARIANT = native
    + TARGET_OS = linux
    + TARGET_OS_FLAVOUR = native
    + TARGET_LIBC = native
    + TARGET_ARCH = x64
    + TARGET_CPU = 
    + TARGET_OUT = /home/user/WORKING_DIRECTORY/out/arsdk-native
    + TARGET_CONFIG_DIR = /home/user/WORKING_DIRECTORY /products/arsdk/native/config
    + TARGET_CC_PATH = /usr/bin/cc
    + TARGET_CC_VERSION = 7
    ----------------------------------------------------------------------
    Scanning /home/user/WORKING_DIRECTORY/packages for makefiles...
    Found 44 makefiles
    Prebuilt module ncurses marked as overriden
    Prebuilt module ncurses marked as overriden
    Package libavcodec was not found in the pkg-config search path.
    Perhaps you should add the directory containing 
    libavcodec.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libavcodec' found
    
    Package libavformat was not found in the pkg-config search path.
    
    Perhaps you should add the directory containing
    

    libavformat.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libavformat' found
    
    Package libswscale was not found in the pkg-config search path.
    
    Perhaps you should add the directory containing
    

    libswscale.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libswscale' found
    
    Package libavutil was not found in the pkg-config search path.
    
    Perhaps you should add the directory containing
    

    libavutil.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libavutil' found
    
    Package libavcodec was not found in the pkg-config search path.
    
    Perhaps you should add the directory containing
    

    libavcodec.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libavcodec' found
    
    Package libavformat was not found in the pkg-config search path.
    
    Perhaps you should add the directory containing
    

    libavformat.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libavformat' found
    
    Package libswscale was not found in the pkg-config search path.
    
    Perhaps you should add the directory containing
    

    libswscale.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libswscale' found
    
    Package libavutil was not found in the pkg-config search path.
    
    Perhaps you should add the directory containing
    

    libavutil.pc'
    
    to the PKG_CONFIG_PATH environment variable
    
    No package 'libavutil' found
    
    Found 96 modules
    
    Computing modules dependencies...
    
    Checking modules dependencies...
    
    /home/user/WORKING_DIRECTORY/build/alchemy/main.mk:360 : *** /home/user    /WORKING_DIRECTORY/packages/libARDiscovery : module 'libARDiscovery'     depends on unknown module 'avahi'.  Stop.
    
    [E] Task 'build-sdk' failed (Command     failed (returncode=2))

    As I understand it libav has been replaced by ffmpeg but the build should still be able to reference the packages as libav. I’ve tried adding different paths to PKG_CONFIG_PATH using `export PKG_CONFIG_PATH=...’ but with no success. It is possible I’m not adding the correct path, I used ’dpkg -L ffmpeg’ to locate the package. The output of that is :

    user@TheMysteriousMachine : $ dpkg -L ffmpeg
    /.
    /etc
    /etc/ffserver.conf
    /usr
    /usr/bin
    /usr/bin/ffmpeg
    /usr/bin/ffplay
    /usr/bin/ffprobe
    /usr/bin/ffserver
    /usr/bin/qt-faststart
    /usr/share
    /usr/share/doc
    /usr/share/doc/ffmpeg
    /usr/share/doc/ffmpeg/RELEASE_NOTES
    /usr/share/doc/ffmpeg/copyright
    /usr/share/ffmpeg
    /usr/share/ffmpeg/libvpx-1080p.ffpreset
    /usr/share/ffmpeg/libvpx-1080p50_60.ffpreset
    /usr/share/ffmpeg/libvpx-360p.ffpreset
    /usr/share/ffmpeg/libvpx-720p.ffpreset
    /usr/share/ffmpeg/libvpx-720p50_60.ffpreset
    /usr/share/lintian
    /usr/share/lintian/overrides
    /usr/share/lintian/overrides/ffmpeg
    /usr/share/man
    /usr/share/man/man1
    /usr/share/man/man1/ffmpeg-all.1.gz
    /usr/share/man/man1/ffmpeg-bitstream-filters.1.gz
    /usr/share/man/man1/ffmpeg-codecs.1.gz
    /usr/share/man/man1/ffmpeg-devices.1.gz
    /usr/share/man/man1/ffmpeg-filters.1.gz
    /usr/share/man/man1/ffmpeg-formats.1.gz
    /usr/share/man/man1/ffmpeg-protocols.1.gz
    /usr/share/man/man1/ffmpeg-resampler.1.gz
    /usr/share/man/man1/ffmpeg-scaler.1.gz
    /usr/share/man/man1/ffmpeg-utils.1.gz
    /usr/share/man/man1/ffmpeg.1.gz
    /usr/share/man/man1/ffplay-all.1.gz
    /usr/share/man/man1/ffplay.1.gz
    /usr/share/man/man1/ffprobe-all.1.gz
    /usr/share/man/man1/ffprobe.1.gz
    /usr/share/man/man1/ffserver-all.1.gz
    /usr/share/man/man1/ffserver.1.gz
    /usr/share/man/man1/qt-faststart.1.gz
    /usr/share/doc/ffmpeg/changelog.Debian.gz

    ...of which I can assume the useful part is ’/usr/bin’ which i added to my PKG_CONFIG_PATH and still the same error when building. I am running Ubuntu 18.04 LTS. I’m at a loss and have been grinding at this for the past 2 days, any help would be GREATLY appreciated. Thank you and I’m happy to provide more needed information. As a small request, I am pretty new to Linux so if you could include as many details in command line operations as possible it would help alot.

Navigation