Recherche avancée

Sur d’autres sites (7755)

• Dreamcast Anniversary Programming

  10 septembre 2010, par Multimedia Mike — Game Hacking

  This day last year saw a lot of nostalgia posts on the internet regarding the Sega Dreamcast, launched 10 years prior to that day (on 9/9/99). Regrettably, none of the retrospectives that I read really seemed to mention the homebrew potential, which is the aspect that interested me. On the occasion of the DC’s 11th anniversary, I wanted to remind myself how to build something for the unit and do so using modern equipment and build tools.

  
  
  

  Background
  Like many other programmers, I initially gained interest in programming because I desired to program video games. Not content to just plunk out games on a PC, I always had a deep, abiding ambition to program actual video game hardware. That is, I wanted to program a purpose-built video game console. The Sega Dreamcast might be the most ideal candidate to ever emerge for that task. All that was required to run your own software on the unit was the console, a PC, some free software tools, and a special connectivity measure.

  The Equipment
  Here is the hardware required (ideally) to build software for the DC :

  • The console itself (I happen to have 3 of them laying around, as pictured above)
  • Some peripherals : Such as the basic DC controller, the DC keyboard (flagship title : Typing of the Dead), and the visual memory unit (VMU)
    
    
    
  • VGA box : The DC supported 480p gaming via a device that allowed you to connect the console straight to a VGA monitor via 15-pin D-sub. Not required for development, but very useful. I happen to have 3 of them from different third parties :
    
    
    
  • Finally, the connectivity measure for hooking the DC to the PC.
    There are 2 options here. The first is rare, expensive and relatively fast : A DC broadband adapter. The second is slower but much less expensive and relatively easy to come by– the DC coder’s cable. This was a DB-9 adapter on one end and a DC serial adapter on the other, and a circuit in the middle to monkey with voltage levels or some such ; I’m no electrical engineer. I procured this model from the notorious Lik Sang, well before that outfit was sued out of business.
    
    
    

  Dealing With Legacy
  Take a look at that coder’s cable again. DB-9 ? When was the last time you owned a computer with one of those ? And then think farther back to the last time to had occasion to plug something into one of those ports (likely a serial mouse).

  
  
  

  A few years ago, someone was about to toss out this Belkin USB to DB-9 serial converter when I intervened. I foresaw the day when I would dust off the coder’s cable. So now I can connect a USB serial cable to my Eee PC, which then connects via converter to a different serial cable, one which has its own conversion circuit that alters the connection to yet another type of serial cable.

  Bits is bits is bits as far as I’m concerned.

  
  
  

  Putting It All Together
  Now to assemble all the pieces (plus a monitor) into one development desktop :

  
  
  

  The monitor says “dcload 1.0.3, idle…”. That’s a custom boot CD-ROM that is patiently waiting to receive commands, code and data via the serial port.

  Getting The Software
  Back in the day, homebrew software development on the DC revolved around these components :

  • GNU binutils : for building base toolchains for the Hitachi SH-4 main CPU as well as the ARM7-based audio coprocessor
  • GNU gcc/g++ : for building compilers on top of binutils for the 2 CPUs
  • Newlib : a C library intended for embedded systems
  • KallistiOS : an open source, real-time OS developed for the DC

  The DC was my first exposure to building cross compilers. I developed some software for the DC in the earlier part of the decade. Now, I am trying to figure out how I did it, especially since I think I came up with a few interesting ideas at the time.

  Struggling With the Software Legacy
  The source for KallistiOS has gone untouched since about 2004 but is still around thanks to Sourceforge. The instructions for properly building the toolchain have been lost to time, or would be were it not for the Internet Archive’s copy of a site called Hangar Eleven. Also, KallistiOS makes reference to a program called ‘dc-tool’ which is needed on the client side for communicating with dcload. I was able to find this binary at the Boob ! site (well-known in DC circles).

  I was able to build the toolchain using binutils 2.20.1, gcc 4.5.1 and newlib 1.18.0. Building the toolchain is an odd process as it requires building the binutils, then building the C compiler, then newlib, and then building the C compiler again along with the C++ compiler because the C++ compiler depends on newlib.

  With some effort, I got the toolchain to build KallistiOS and most of its example programs. I documented most of the tweaks I had to make, several of them exactly the same as this one that I recently discovered while resurrecting a 10-year-old C program (common construct in C programming of old ?).

  Moment of Truth
  So I had some example programs built as ELF files. I told dc-tool to upload and run them on the waiting console. Unfortunately, the tool would just sort of stall, though some communication had evidently taken place. It has been many years since I have seen this in action but I recall that something more ought to be happening.

  Plan B (Hardware)
  This is the point that I remember that I have been holding onto one rather old little machine that still has a DB-9 serial port. It’s not especially ergonomic to set up. I have to run it on my floor because, to connect it to my network, I need to run a 25′ ethernet cable that just barely reaches from the other room. The machine doesn’t seem to like USB keyboards, which is a shame since I have long since ditched any PS/2 keyboards. Fortunately, the box still has an old Gentoo distro and is running sshd, a holdover from its former life as a headless box.

  
  
  

  Now when I run dc-tool, both the PC and DC report the upload progress while pretty overscan bars oscillate on the DC’s monitor. Now I’m back in business, until…

  Plan C (Software)
  None of these KallistiOS example programs are working. Some are even reporting catastrophic failures (register dumps) via the serial console. That’s when I remember that gcc can be a bit fickle on CPU architectures that are not, shall we say, first-class citizens. Back in the day, gcc 2.95 was a certified no-go for SH-4 development. 3.0.3 or 3.0.4 was called upon at the time. As I’m hosting this toolchain on x86_64 right now, gcc 3.0.4 can’t even be built (predates the architecture).

  One last option : As I searched through my old DC project directories, I found that I still have a lot of the resulting binaries, the ones I built 7-8 years ago. I upload a few of those and I finally see homebrew programming at work again, including this old program (described in detail here).

  Next Steps
  If I ever feel like revisiting this again, I suppose I can try some of the older 4.x series to see if they build valid programs. Alternatively, try building an x86_32-hosted 3.0.4 toolchain which ought to be a known good. And if that fails, search a little bit more to find that there are still active Dreamcast communities out there on the internet which probably have development toolchain binaries ready for download.

• Revision be6aeadaf4 : Try again to merge branch 'frame-parallel' into master branch. In frame paralle

  27 janvier 2015, par hkuang

  Changed Paths :
   Modify /test/decode_test_driver.cc

  
   Modify /test/test-data.mk

  
   Modify /test/test-data.sha1

  
   Modify /test/test.mk

  
   Modify /test/test_vector_test.cc

  
   Modify /test/test_vectors.cc

  
   Modify /test/vp9_encoder_parms_get_to_decoder.cc

  
   Add /test/vp9_frame_parallel_test.cc

  
   Modify /test/webm_video_source.h

  
   Modify /vp9/common/vp9_alloccommon.c

  
   Modify /vp9/common/vp9_alloccommon.h

  
   Modify /vp9/common/vp9_entropymode.c

  
   Modify /vp9/common/vp9_mvref_common.c

  
   Modify /vp9/common/vp9_mvref_common.h

  
   Modify /vp9/common/vp9_onyxc_int.h

  
   Modify /vp9/common/vp9_reconinter.c

  
   Modify /vp9/common/vp9_reconinter.h

  
   Modify /vp9/decoder/vp9_decodeframe.c

  
   Modify /vp9/decoder/vp9_decodeframe.h

  
   Modify /vp9/decoder/vp9_decodemv.c

  
   Modify /vp9/decoder/vp9_decodemv.h

  
   Modify /vp9/decoder/vp9_decoder.c

  
   Modify /vp9/decoder/vp9_decoder.h

  
   Add /vp9/decoder/vp9_dthread.c

  
   Add /vp9/decoder/vp9_dthread.h

  
   Modify /vp9/encoder/vp9_encoder.c

  
   Modify /vp9/encoder/vp9_encoder.h

  
   Modify /vp9/encoder/vp9_firstpass.c

  
   Modify /vp9/encoder/vp9_pickmode.c

  
   Modify /vp9/encoder/vp9_rd.c

  
   Modify /vp9/encoder/vp9_rdopt.c

  
   Modify /vp9/vp9_cx_iface.c

  
   Modify /vp9/vp9_dx_iface.c

  
   Modify /vp9/vp9dx.mk

  
   Modify /vpx/vpx_frame_buffer.h

  
   Modify /webmdec.cc

  
   Modify /webmdec.h

  
  
  Try again to merge branch ’frame-parallel’ into master branch.

  In frame parallel decode, libvpx decoder decodes several frames on all
  cpus in parallel fashion. If not being flushed, it will only return frame
  when all the cpus are busy. If getting flushed, it will return all the
  frames in the decoder. Compare with current serial decode mode in which
  libvpx decoder is idle between decode calls, libvpx decoder is busy
  between decode calls.

  Current frame parallel decode will only speed up the decoding for frame
  parallel encoded videos. For non frame parallel encoded videos, frame
  parallel decode is slower than serial decode due to lack of loopfilter
  worker thread.

  There are still some known issues that need to be addressed. For example :
  decode frame parallel videos with segmentation enabled is not right sometimes.

  * frame-parallel :
  Add error handling for frame parallel decode and unit test for that.
  Fix a bug in frame parallel decode and add a unit test for that.
  Add two test vectors to test frame parallel decode.
  Add key frame seeking to webmdec and webm_video_source.
  Implement frame parallel decode for VP9.
  Increase the thread test range to cover 5, 6, 7, 8 threads.
  Fix a bug in adding frame parallel unit test.
  Add VP9 frame-parallel unit test.
  Manually pick "Make the api behavior conform to api spec." from master branch.
  Move vp9_dec_build_inter_predictors_* to decoder folder.
  Add segmentation map array for current and last frame segmentation.
  Include the right header for VP9 worker thread.
  Move vp9_thread.* to common.
  ctrl_get_reference does not need user_priv.
  Seperate the frame buffers from VP9 encoder/decoder structure.
  Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to
  build :"""
  Conflicts :
  test/codec_factory.h
  test/decode_test_driver.cc
  test/decode_test_driver.h
  test/invalid_file_test.cc
  test/test-data.sha1
  test/test.mk
  test/test_vectors.cc
  vp8/vp8_dx_iface.c
  vp9/common/vp9_alloccommon.c
  vp9/common/vp9_entropymode.c
  vp9/common/vp9_loopfilter_thread.c
  vp9/common/vp9_loopfilter_thread.h
  vp9/common/vp9_mvref_common.c
  vp9/common/vp9_onyxc_int.h
  vp9/common/vp9_reconinter.c
  vp9/decoder/vp9_decodeframe.c
  vp9/decoder/vp9_decodeframe.h
  vp9/decoder/vp9_decodemv.c
  vp9/decoder/vp9_decoder.c
  vp9/decoder/vp9_decoder.h
  vp9/encoder/vp9_encoder.c
  vp9/encoder/vp9_pickmode.c
  vp9/encoder/vp9_rdopt.c
  vp9/vp9_cx_iface.c
  vp9/vp9_dx_iface.c

  This reverts commit a18da9760a74d9ce6fb9f875706dc639c95402f5.

  Change-Id : I361442ffec1586d036ea2e0ee97ce4f077585f02

• Revision 1eb6e683f2 : Add superframe support for frame parallel decoding. A superframe is a bunch of

  13 juin 2014, par hkuang

  Changed Paths :
   Modify /vp9/vp9_dx_iface.c

  
  
  Add superframe support for frame parallel decoding.

  A superframe is a bunch of frames that bundled as one frame. It is mostly
  used to combine one or more non-displayable frames and one displayable frame.

  For frame parallel decoding, libvpx decoder will only support decoding one
  normal frame or a super frame with superframe index.

  If an application pass a superframe without superframe index or a chunk
  of displayable frames without superframe index to libvpx decoder, libvpx
  will not decode it in frame parallel mode. But libvpx decoder still could
  decode it in serial mode.

  Change-Id : I04c9f2c828373d64e880a8c7bcade5307015ce35