Recherche avancée

Sur d’autres sites (7059)

• Introducing WebM, an open web media project

  19 mai 2010, par noreply@blogger.com (christosap)

  A key factor in the web’s success is that its core technologies such as HTML, HTTP, TCP/IP, etc. are open and freely implementable. Though video is also now core to the web experience, there is unfortunately no open and free video format that is on par with the leading commercial choices. To that end, we are excited to introduce WebM, a broadly-backed community effort to develop a world-class media format for the open web.

  WebM includes :
  

  • VP8, a high-quality video codec we are releasing today under a BSD-style, royalty-free license
  • Vorbis, an already open source and broadly implemented audio codec
  • a container format based on a subset of the Matroska media container

  The team that created VP8 have been pioneers in video codec development for over a decade. VP8 delivers high quality video while efficiently adapting to the varying processing and bandwidth conditions found on today’s broad range of web-connected devices. VP8’s efficient bandwidth usage will mean lower serving costs for content publishers and high quality video for end-users. The codec’s relative simplicity makes it easy to integrate into existing environments and requires less manual tuning to produce high quality results. These existing attributes and the rapid innovation we expect through the open-development process make VP8 well suited for the unique requirements of video on the web.

  A developer preview of WebM and VP8, including source code, specs, and encoding tools is available today at www.webmproject.org.

  We want to thank the many industry leaders and web community members who are collaborating on the development of WebM and integrating it into their products. Check out what Mozilla, Opera, Google Chrome, Adobe, and many others below have to say about the importance of WebM to the future of web video.

  
  

  AMD

  ARM

  Brightcove

  Broadcom

  Collabora

  Digital Rapids

  Encoding.com

  Grab Networks

  iLinc

  INLET

  Kaltura

  Logitech

  MIPS

  Nvidia

  Ooyala

  Qualcomm

  Skype

  Sorenson

  Telestream
  

  Texas Instruments

  Verisilicon

  ViewCast

  Wildform

  
  

  Posted by Jeremy Doig, Engineering Director of video and Mike Jazayeri, Group Product Manager, Google

  

• MPEG DASH : frame seeking

  13 août 2014, par bisc8

  TL ;DR : Is it possible to achieve frame seeking using DASH ? How ?

  I’m using ffmpeg to create non-multiplexed content :

  ffmpeg -y -an -codec:v libx264 -profile:v baseline output_video.mp4 -i video.mp4
  
  ffmpeg -y -vn -codec:a libvo_aacenc -ac 1 -ar 44100 output_audio.mp4 -i video.mp4

  Then I’m using mp4box to create DASH content :

  mp4box -dash 10000 -frag 1000 -rap -dash-profile live -segment-name mp4-live-$RepresentationID$-$Number$ -out manifest.mpd output_video.mp4 output_audio.mp4

  Finally I open the generated content with Chrome, using dash.js. Everything works fine except that I can’t do frame seek. I keep on adding (1/frame_rate) seconds to the current time but nothing happens, the frame only changes after 10 seconds.

  I suppose this has to do with the video’s key interval. However, I am able to do frame seek after the ffmpeg part, so I guess I’m missing something in the mp4box command.

  Is it possible to achieve frame seeking using DASH or am I missing something ?

  Thanks in advance.

• Monster Battery Power Revisited

  28 mai 2010, par Multimedia Mike — Python, Science Projects

  So I have this new fat netbook battery and I performed an experiment to determine how long it really lasts. In my last post on the matter, it was suggested that I should rely on the information that gnome-power-manager is giving me. However, I have rarely seen GPM report more than about 2 hours of charge ; even on a full battery, it only reports 3h25m when I profiled it as lasting over 5 hours in my typical use. So I started digging to understand how GPM gets its numbers and determine if, perhaps, it’s not getting accurate data from the system.

  I started poking around /proc for the data I wanted. You can learn a lot in /proc as long as you know the right question to ask. I had to remember what the power subsystem is called — ACPI — and this led me to /proc/acpi/battery/BAT0/state which has data such as :

  present :                 yes
  capacity state :          ok
  charging state :          charged
  present rate :            unknown
  remaining capacity :      100 mAh
  present voltage :         8326 mV
  

  "Remaining capacity" rated in mAh is a little odd ; I would later determine that this should actually be expressed as a percentage (i.e., 100% charge at the time of this reading). Examining the GPM source code, it seems to determine as a function of the current CPU load (queried via /proc/stat) and the battery state queried via a facility called devicekit. I couldn’t immediately find any source code to the latter but I was able to install a utility called ’devkit-power’. Mostly, it appears to rehash data already found in the above /proc file.

  Curiously, the file /proc/acpi/battery/BAT0/info, which displays essential information about the battery, reports the design capacity of my battery as only 4400 mAh which is true for the original battery ; the new monster battery is supposed to be 10400 mAh. I can imagine that all of these data points could be conspiring to under-report my remaining battery life.

  Science project : Repeat the previous power-related science project but also parse and track the remaining capacity and present voltage fields from the battery state proc file.

  Let’s skip straight to the results (which are consistent with my last set of results in terms of longevity) :

  
  
  

  So there is definitely something strange going on with the reporting— the 4400 mAh battery reports discharge at a linear rate while the 10400 mAh battery reports precipitous dropoff after 60%.

  Another curious item is that my script broke at first when there was 20% power remaining which, as you can imagine, is a really annoying time to discover such a bug. At that point, the "time to empty" reported by devkit-power jumped from 0 seconds to 20 hours (the first state change observed for that field).

  Here’s my script, this time elevated from Bash script to Python. It requires xdotool and devkit-power to be installed (both should be available in the package manager for a distro).
  

  PLAIN TEXT

  PYTHON :

  1. # !/usr/bin/python
  2.  
  3. import commands
  4. import random
  5. import sys
  6. import time
  7.  
  8. XDOTOOL = "/usr/bin/xdotool"
  9. BATTERY_STATE = "/proc/acpi/battery/BAT0/state"
  10. DEVKIT_POWER = "/usr/bin/devkit-power -i /org/freedesktop/DeviceKit/Power/devices/battery_BAT0"
  11.  
  12. print "count, unixtime, proc_remaining_capacity, proc_present_voltage, devkit_percentage, devkit_voltage"
  13.  
  14. count = 0
  15. while 1 :
  16.   commands.getstatusoutput("%s mousemove %d %d" % (XDOTOOL, random.randrange(0,800), random.randrange(0, 480)))
  17.   battery_state = open(BATTERY_STATE).read().splitlines()
  18.   for line in battery_state :
  19.     if line.startswith("remaining capacity :") :
  20.       proc_remaining_capacity = int(line.lstrip("remaining capacity : ").rstrip("mAh"))
  21.     elif line.startswith("present voltage :") :
  22.       proc_present_voltage = int(line.lstrip("present voltage : ").rstrip("mV"))
  23.   devkit_state = commands.getoutput(DEVKIT_POWER).splitlines()
  24.   for line in devkit_state :
  25.     line = line.strip()
  26.     if line.startswith("percentage :") :
  27.       devkit_percentage = int(line.lstrip("percentage :").rstrip(’\%’))
  28.     elif line.startswith("voltage :") :
  29.       devkit_voltage = float(line.lstrip("voltage :").rstrip(’V’)) * 1000
  30.   print "%d, %d, %d, %d, %d, %d" % (count, time.time(), proc_remaining_capacity, proc_present_voltage, devkit_percentage, devkit_voltage)
  31.   sys.stdout.flush()
  32.   time.sleep(60)
  33.   count += 1