Recherche avancée

Médias (91)

Autres articles (78)

  • Publier sur MédiaSpip

    13 juin 2013

    Puis-je poster des contenus à partir d’une tablette Ipad ?
    Oui, si votre Médiaspip installé est à la version 0.2 ou supérieure. Contacter au besoin l’administrateur de votre MédiaSpip pour le savoir

  • Demande de création d’un canal

    12 mars 2010, par

    En fonction de la configuration de la plateforme, l’utilisateur peu avoir à sa disposition deux méthodes différentes de demande de création de canal. La première est au moment de son inscription, la seconde, après son inscription en remplissant un formulaire de demande.
    Les deux manières demandent les mêmes choses fonctionnent à peu près de la même manière, le futur utilisateur doit remplir une série de champ de formulaire permettant tout d’abord aux administrateurs d’avoir des informations quant à (...)

  • Diogene : création de masques spécifiques de formulaires d’édition de contenus

    26 octobre 2010, par

    Diogene est un des plugins ? SPIP activé par défaut (extension) lors de l’initialisation de MediaSPIP.
    A quoi sert ce plugin
    Création de masques de formulaires
    Le plugin Diogène permet de créer des masques de formulaires spécifiques par secteur sur les trois objets spécifiques SPIP que sont : les articles ; les rubriques ; les sites
    Il permet ainsi de définir en fonction d’un secteur particulier, un masque de formulaire par objet, ajoutant ou enlevant ainsi des champs afin de rendre le formulaire (...)

Sur d’autres sites (7668)

  • FFmpeg library (ver 5.1) multithread decode and scaler

    19 août 2022, par wolverin

    I wrote my own code that takes the video from v4l2 MJPEG and streams it to the rtsp server in H264.

    


    Everything is fine as long as the incoming and outgoing stream resolution is 640x480, but if the incoming is 1920x1080 and I do sws_scale, then decoding and scaling are very slow.

    


    If I run ffmpeg from the command line, I see swscale errors, which means that sws_getContext is called 20 times, which means a queue of 20 scaling threads is created

    


    Input #0, video4linux2,v4l2, from '/dev/video0':
  Duration: N/A, bitrate: N/A
  Stream #0:0: Video: mjpeg, none(bt470bg/unknown/unknown), 640x480, 30 fps, 30 tbr, 1000k tbn
Stream mapping:
  Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[swscaler @ 0x14b8160] [swscaler @ 0x14c18b0] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14df9b0] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14fd790] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x151b570] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x1539350] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14c18b0] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14db1a0] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14f8f80] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x1516d60] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x15396f0] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x152d3d0] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14c2060] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14dfe40] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14fdc20] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x151ba00] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x152d3d0] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14c2060] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14dfe40] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x14fdc20] deprecated pixel format used, make sure you did set range correctly
[swscaler @ 0x14b8160] [swscaler @ 0x151ba00] deprecated pixel format used, make sure you did set range correctly
[libx264 @ 0x14a0950] using cpu capabilities: ARMv6 NEON
[libx264 @ 0x14a0950] profile High 4:2:2, level 3.0, 4:2:2 8-bit
[libx264 @ 0x14a0950] 264 - core 148 r2643 5c65704 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc_lookahead=0 rc=cbr mbtree=0 bitrate=500 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=500 vbv_bufsize=1000 nal_hrd=none filler=0 ip_ratio=1.40 aq=0
Output #0, rtsp, to 'rtsp://localhost:554/cam':
  Metadata:
    encoder         : Lavf59.25.100
  Stream #0:0: Video: h264, yuv422p(tv, bt470bg/unknown/unknown, progressive), 640x480, q=2-31, 500 kb/s, 30 fps, 90k tbn
    Metadata:
      encoder         : Lavc59.33.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 500000/0/500000 buffer size: 1000000 vbv_delay: N/A


    


    1. How to create a multithreading ffmpeg for sws_scale ?

    


    2. Does internal multithreading work for mjpeg decoding, for example in AVCodecContext ? If not, what is the best way to create multithreading for decoding ?

    


  • ffplay 461 Unsupported transport

    28 octobre 2017, par Cerato

    Please help me to understand what I am doing wrong.

    I am executing the following command for making a live stream

    Executing: powershell gst-launch-1.0 filesrc location=D:/testVODs/sample.mkv ! matroskademux name=dmx dmx. ! h264parse config-interval=1 ! queue ! rtspclientsink profiles=avpf protocols=udp location="rtsp://192.168.1.1:8554/8c83bea4-b49b-4776-9c0f-d11e9e8898f0/1" name=rtsp_out dmx. ! opusparse ! queue ! rtsp_out.

    and in the result, I see that the execution ended after 00:01:21 which means that the stream is ended successfully after my video ended :

    Setting pipeline to PAUSED ...
    
Pipeline is PREROLLING ...
    
Progress: (open) Opening Stream
    
Progress: (connect) Connecting to rtsp://192.168.1.1:8554/8c83bea4-b49b-4776-9c0f-d11e9e8898f0/1
    
Progress: (open) Retrieving server options
    
Progress: (open) Opened Stream
    
Pipeline is PREROLLED ...
    
Setting pipeline to PLAYING ...
    
New clock: GstSystemClock
    
Progress: (request) Sending RECORD request
    
Progress: (record) Sending server stream info
    
Progress: (request) Sending RECORD request
    
Progress: (request) SETUP stream 1
    
Progress: (request) SETUP stream 0
    
Progress: (record) Starting recording
    
Got EOS from element "pipeline0".
    
Execution ended after 0:01:21.318315052
    
Setting pipeline to PAUSED ...
    
Setting pipeline to READY ...
    
Setting pipeline to NULL ...
    
Freeing pipeline ...

    at the same time I am trying to play the stream using the following request :

    Executing: powershell ffplay -rtsp_transport http "rtsp://192.168.1.1:8554/live/8c83bea4-b49b-4776-9c0f-d11e9e8898f0/1"

    but I have the following response :

    ffplay started on 2017-10-27 at 18:52:13
    
Report written to "D:/testVODs/Stream1to.log"
    
ffplay version 3.4 Copyright (c) 2003-2017 the FFmpeg developers
    
  built with gcc 7.2.0 (GCC)
    
  configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-bzlib --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-cuda --enable-cuvid --enable-d3d11va --enable-nvenc --enable-dxva2 --enable-avisynth --enable-libmfx
    
  libavutil      55. 78.100 / 55. 78.100
    
  libavcodec     57.107.100 / 57.107.100
    
  libavformat    57. 83.100 / 57. 83.100
    
  libavdevice    57. 10.100 / 57. 10.100
    
  libavfilter     6.107.100 /  6.107.100
    
  libswscale      4.  8.100 /  4.  8.100
    
  libswresample   2.  9.100 /  2.  9.100
    
  libpostproc    54.  7.100 / 54.  7.100
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
    nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
    
[rtsp @ 000001930a05e500] method SETUP failed: 461 Unsupported transport
    
rtsp://192.168.1.1:8554/live/8c83bea4-b49b-4776-9c0f-d11e9e8898f0/1: Unknown error

    why method SETUP failed as 461 Unsupported transport and how it can be solved ?

    I tried to use different ffplay, ffmpeg commands, but all of them lead to the same result.
    If I do not use rtsp_trasport command I have the error [udp @ 000001d1ab52c300] ’circular_buffer_size’ option was set but it is not supported on this build (pthread support is required)
    and the same 461 Unsupported transport

    Before I added "profiles=avpf" to my stream creation request I managed to play it successfully with "rtsp_transport tcp".
    But now profiles=avpf is required and I need to understand how to deal with it

  • FFMPEG on ubuntu wont start. Process is just killed [on hold]

    8 novembre 2018, par AK47

    I am trying to run a command on ffmpeg. When I run on my local computer it works fine but when running on my ubuntu server it won’t start. It just keeps giving an error saying the process is killed when it trys to start. Is this something related to memory or a different issue ?

    Killed   14 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=2 drop=0 speed=   0x

    Any help would be greatly appreciated

    Below are logs that are thrown.

    root@kickpush:/var/www/kick-push.co.uk/public_html/allblacks# ffmpeg -loop 1 -i q.png -r 30 -t 10 -i a.png -r 30 -t 5 image2.mp4
    
ffmpeg version 3.3.3 Copyright (c) 2000-2017 the FFmpeg developers
    
  built with gcc 4.8 (Ubuntu 4.8.4-2ubuntu1~14.04.3)
    
  configuration: --extra-libs=-ldl --prefix=/opt/ffmpeg --mandir=/usr/share/man --enable-avresample --disable-debug --enable-nonfree --enable-gpl --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --disable-decoder=amrnb --disable-decoder=amrwb --enable-libpulse --enable-libfreetype --enable-gnutls --disable-ffserver--enable-libx264 --enable-libx265 --enable-libfdk-aac --enable-libvorbis --enable-libtheora --enable-libmp3lame --enable-libopus --enable-libvpx --enable-libspeex --enable-libass --enable-avisynth --enable-libsoxr --enable-libxvid --enable-libvidstab --enable-libwavpack --enable-nvenc --enable-libzimg
    
  libavutil      55. 58.100 / 55. 58.100
    
  libavcodec     57. 89.100 / 57. 89.100
    
  libavformat    57. 71.100 / 57. 71.100
    
  libavdevice    57.  6.100 / 57.  6.100
    
  libavfilter     6. 82.100 /  6. 82.100
    
  libavresample   3.  5.  0 /  3.  5.  0
    
  libswscale      4.  6.100 /  4.  6.100
    
  libswresample   2.  7.100 /  2.  7.100
    
  libpostproc    54.  5.100 / 54.  5.100
    
Input #0, png_pipe, from 'q.png':
    
  Duration: N/A, bitrate: N/A
    
    Stream #0:0: Video: png, rgba(pc), 1080x1920, 25 fps, 25 tbr, 25 tbn, 25 tbc
    
Input #1, png_pipe, from 'a.png':
    
  Duration: N/A, bitrate: N/A
    
    Stream #1:0: Video: png, rgba(pc), 1080x1920, 25 tbr, 25 tbn, 25 tbc
    
Stream mapping:
    
  Stream #0:0 -> #0:0 (png (native) -> h264 (libx264))
    
Press [q] to stop, [?] for help
    
No pixel format specified, yuv444p for H.264 encoding chosen.
    
Use -pix_fmt yuv420p for compatibility with outdated media players.
    
[libx264 @ 0x31a4a40] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
    
[libx264 @ 0x31a4a40] profile High 4:4:4 Predictive, level 4.0, 4:4:4 8-bit
    
[libx264 @ 0x31a4a40] 264 - core 148 r2643 5c65704 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=1 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    
Output #0, mp4, to 'image2.mp4':
    
  Metadata:
    
    encoder         : Lavf57.71.100
    
    Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv444p, 1080x1920, q=-1--1, 30 fps, 15360 tbn, 30 tbc
    
    Metadata:
    
      encoder         : Lavc57.89.100 libx264
    
    Side data:
    
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
    
Killed   14 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=2 drop=0 speed=   0x

Navigation