Recherche avancée

Sur d’autres sites (10658)

• H.264 and VP8 for still image coding : WebP ?

  
  1er octobre 2010, par Dark Shikari — google, H.264, psychovisual optimizations, VP8

  Update : post now contains a Theora comparison as well ; see below.

  JPEG is a very old lossy image format. By today’s standards, it’s awful compression-wise : practically every video format since the days of MPEG-2 has been able to tie or beat JPEG at its own game. The reasons people haven’t switched to something more modern practically always boil down to a simple one — it’s just not worth the hassle. Even if JPEG can be beaten by a factor of 2, convincing the entire world to change image formats after 20 years is nigh impossible. Furthermore, JPEG is fast, simple, and practically guaranteed to be free of any intellectual property worries. It’s been tried before : JPEG-2000 first, then Microsoft’s JPEG XR, both tried to unseat JPEG. Neither got much of anywhere.

  Now Google is trying to dump yet another image format on us, “WebP”. But really, it’s just a VP8 intra frame. There are some obvious practical problems with this new image format in comparison to JPEG ; it doesn’t even support all of JPEG’s features, let alone many of the much-wanted features JPEG was missing (alpha channel support, lossless support). It only supports 4:2:0 chroma subsampling, while JPEG can handle 4:2:2 and 4:4:4. Google doesn’t seem interested in adding any of these features either.

  But let’s get to the meat and see how these encoders stack up on compressing still images. As I explained in my original analysis, VP8 has the advantage of H.264′s intra prediction, which is one of the primary reasons why H.264 has such an advantage in intra compression. It only has i4x4 and i16x16 modes, not i8x8, so it’s not quite as fancy as H.264′s, but it comes close.

  The test files are all around 155KB ; download them for the exact filesizes. For all three, I did a binary search of quality levels to get the file sizes close. For x264, I encoded with --tune stillimage --preset placebo. For libvpx, I encoded with --best. For JPEG, I encoded with ffmpeg, then applied jpgcrush, a lossless jpeg compressor. I suspect there are better JPEG encoders out there than ffmpeg ; if you have one, feel free to test it and post the results. The source image is the 200th frame of Parkjoy, from derf’s page (fun fact : this video was shot here ! More info on the video here.).

  Files : (x264 [154KB], vp8 [155KB], jpg [156KB])

  Results (decoded to PNG) : (x264, vp8, jpg)

  This seems rather embarrassing for libvpx. Personally I think VP8 looks by far the worst of the bunch, despite JPEG’s blocking. What’s going on here ? VP8 certainly has better entropy coding than JPEG does (by far !). It has better intra prediction (JPEG has just DC prediction). How could VP8 look worse ? Let’s investigate.

  VP8 uses a 4×4 transform, which tends to blur and lose more detail than JPEG’s 8×8 transform. But that alone certainly isn’t enough to create such a dramatic difference. Let’s investigate a hypothesis — that the problem is that libvpx is optimizing for PSNR and ignoring psychovisual considerations when encoding the image… I’ll encode with --tune psnr --preset placebo in x264, turning off all psy optimizations. 

  Files : (x264, optimized for PSNR [154KB]) [Note for the technical people : because adaptive quantization is off, to get the filesize on target I had to use a CQM here.]

  Results (decoded to PNG) : (x264, optimized for PSNR)

  What a blur ! Only somewhat better than VP8, and still worse than JPEG. And that’s using the same encoder and the same level of analysis — the only thing done differently is dropping the psy optimizations. Thus we come back to the conclusion I’ve made over and over on this blog — the encoder matters more than the video format, and good psy optimizations are more important than anything else for compression. libvpx, a much more powerful encoder than ffmpeg’s jpeg encoder, loses because it tries too hard to optimize for PSNR.

  These results raise an obvious question — is Google nuts ? I could understand the push for “WebP” if it was better than JPEG. And sure, technically as a file format it is, and an encoder could be made for it that’s better than JPEG. But note the word “could”. Why announce it now when libvpx is still such an awful encoder ? You’d have to be nuts to try to replace JPEG with this blurry mess as-is. Now, I don’t expect libvpx to be able to compete with x264, the best encoder in the world — but surely it should be able to beat an image format released in 1992 ?

  Earth to Google : make the encoder good first, then promote it as better than the alternatives. The reverse doesn’t work quite as well.

  Addendum (added Oct. 2, 03:51) :

  maikmerten gave me a Theora-encoded image to compare as well. Here’s the PNG and the source (155KB). And yes, that’s Theora 1.2 (Ptalarbvorm) beating VP8 handily. Now that is embarassing. Guess what the main new feature of Ptalarbvorm is ? Psy optimizations…

  Addendum (added Apr. 20, 23:33) :

  There’s a new webp encoder out, written from scratch by skal (available in libwebp). It’s significantly better than libvpx — not like that says much — but it should probably beat JPEG much more readily now. The encoder design is rather unique — it basically uses K-means for a large part of the encoding process. It still loses to x264, but that was expected.

  [155KB]

• Announcing the world’s fastest VP8 decoder : ffvp8

  24 juillet 2010, par Dark Shikari — VP8, ffmpeg, google, speed

  Back when I originally reviewed VP8, I noted that the official decoder, libvpx, was rather slow. While there was no particular reason that it should be much faster than a good H.264 decoder, it shouldn’t have been that much slower either ! So, I set out with Ronald Bultje and David Conrad to make a better one in FFmpeg. This one would be community-developed and free from the beginning, rather than the proprietary code-dump that was libvpx. A few weeks ago the decoder was complete enough to be bit-exact with libvpx, making it the first independent free implementation of a VP8 decoder. Now, with the first round of optimizations complete, it should be ready for primetime. I’ll go into some detail about the development process, but first, let’s get to the real meat of this post : the benchmarks.

  We tested on two 1080p clips : Parkjoy, a live-action 1080p clip, and the Sintel trailer, a CGI 1080p clip. Testing was done using “time ffmpeg -vcodec libvpx or vp8 -i input -vsync 0 -an -f null -”. We all used the latest SVN FFmpeg at the time of this posting ; the last revision optimizing the VP8 decoder was r24471.

  

  As these benchmarks show, ffvp8 is clearly much faster than libvpx, particularly on 64-bit. It’s even faster by a large margin on Atom, despite the fact that we haven’t even begun optimizing for it. In many cases, ffvp8′s extra speed can make the difference between a video that plays and one that doesn’t, especially in modern browsers with software compositing engines taking up a lot of CPU time. Want to get faster playback of VP8 videos ? The next versions of FFmpeg-based players, like VLC, will include ffvp8. Want to get faster playback of WebM in your browser ? Lobby your browser developers to use ffvp8 instead of libvpx. I expect Chrome to switch first, as they already use libavcodec for most of their playback system.

  Keep in mind ffvp8 is not “done” — we will continue to improve it and make it faster. We still have a number of optimizations in the pipeline that aren’t committed yet.

  Developing ffvp8

  The initial challenge, primarily pioneered by David and Ronald, was constructing the core decoder and making it bit-exact to libvpx. This was rather challenging, especially given the lack of a real spec. Many parts of the spec were outright misleading and contradicted libvpx itself. It didn’t help that the suite of official conformance tests didn’t even cover all the features used by the official encoder ! We’ve already started adding our own conformance tests to deal with this. But I’ve complained enough in past posts about the lack of a spec ; let’s get onto the gritty details.

  The next step was adding SIMD assembly for all of the important DSP functions. VP8′s motion compensation and deblocking filter are by far the most CPU-intensive parts, much the same as in H.264. Unlike H.264, the deblocking filter relies on a lot of internal saturation steps, which are free in SIMD but costly in a normal C implementation, making the plain C code even slower. Of course, none of this is a particularly large problem ; any sane video decoder has all this stuff in SIMD.

  I tutored Ronald in x86 SIMD and wrote most of the motion compensation, intra prediction, and some inverse transforms. Ronald wrote the rest of the inverse transforms and a bit of the motion compensation. He also did the most difficult part : the deblocking filter. Deblocking filters are always a bit difficult because every one is different. Motion compensation, by comparison, is usually very similar regardless of video format ; a 6-tap filter is a 6-tap filter, and most of the variation going on is just the choice of numbers to multiply by.

  The biggest challenge in an SIMD deblocking filter is to avoid unpacking, that is, going from 8-bit to 16-bit. Many operations in deblocking filters would naively appear to require more than 8-bit precision. A simple example in the case of x86 is abs(a-b), where a and b are 8-bit unsigned integers. The result of “a-b” requires a 9-bit signed integer (it can be anywhere from -255 to 255), so it can’t fit in 8-bit. But this is quite possible to do without unpacking : (satsub(a,b) | satsub(b,a)), where “satsub” performs a saturating subtract on the two values. If the value is positive, it yields the result ; if the value is negative, it yields zero. Oring the two together yields the desired result. This requires 4 ops on x86 ; unpacking would probably require at least 10, including the unpack and pack steps.

  After the SIMD came optimizing the C code, which still took a significant portion of the total runtime. One of my biggest optimizations was adding aggressive “smart” prefetching to reduce cache misses. ffvp8 prefetches the reference frames (PREVIOUS, GOLDEN, and ALTREF)… but only the ones which have been used reasonably often this frame. This lets us prefetch everything we need without prefetching things that we probably won’t use. libvpx very often encodes frames that almost never (but not quite never) use GOLDEN or ALTREF, so this optimization greatly reduces time spent prefetching in a lot of real videos. There are of course countless other optimizations we made that are too long to list here as well, such as David’s entropy decoder optimizations. I’d also like to thank Eli Friedman for his invaluable help in benchmarking a lot of these changes.

  What next ? Altivec (PPC) assembly is almost nonexistent, with the only functions being David’s motion compensation code. NEON (ARM) is completely nonexistent : we’ll need that to be fast on mobile devices as well. Of course, all this will come in due time — and as always — patches welcome !

  Appendix : the raw numbers

  Here’s the raw numbers (in fps) for the graphs at the start of this post, with standard error values :

  Core i7 620QM (1.6Ghz), Windows 7, 32-bit :
  Parkjoy ffvp8 : 44.58 0.44
  Parkjoy libvpx : 33.06 0.23
  Sintel ffvp8 : 74.26 1.18
  Sintel libvpx : 56.11 0.96

  Core i5 520M (2.4Ghz), Linux, 64-bit :
  Parkjoy ffvp8 : 68.29 0.06
  Parkjoy libvpx : 41.06 0.04
  Sintel ffvp8 : 112.38 0.37
  Sintel libvpx : 69.64 0.09

  Core 2 T9300 (2.5Ghz), Mac OS X 10.6.4, 64-bit :
  Parkjoy ffvp8 : 54.09 0.02
  Parkjoy libvpx : 33.68 0.01
  Sintel ffvp8 : 87.54 0.03
  Sintel libvpx : 52.74 0.04

  Core Duo (2Ghz), Mac OS X 10.6.4, 32-bit :
  Parkjoy ffvp8 : 21.31 0.02
  Parkjoy libvpx : 17.96 0.00
  Sintel ffvp8 : 41.24 0.01
  Sintel libvpx : 29.65 0.02

  Atom N270 (1.6Ghz), Linux, 32-bit :
  Parkjoy ffvp8 : 15.29 0.01
  Parkjoy libvpx : 12.46 0.01
  Sintel ffvp8 : 26.87 0.05
  Sintel libvpx : 20.41 0.02

• Announcing the world’s fastest VP8 decoder : ffvp8

  24 juillet 2010, par Dark Shikari — ffmpeg, google, speed, VP8

  Back when I originally reviewed VP8, I noted that the official decoder, libvpx, was rather slow. While there was no particular reason that it should be much faster than a good H.264 decoder, it shouldn’t have been that much slower either ! So, I set out with Ronald Bultje and David Conrad to make a better one in FFmpeg. This one would be community-developed and free from the beginning, rather than the proprietary code-dump that was libvpx. A few weeks ago the decoder was complete enough to be bit-exact with libvpx, making it the first independent free implementation of a VP8 decoder. Now, with the first round of optimizations complete, it should be ready for primetime. I’ll go into some detail about the development process, but first, let’s get to the real meat of this post : the benchmarks.

  We tested on two 1080p clips : Parkjoy, a live-action 1080p clip, and the Sintel trailer, a CGI 1080p clip. Testing was done using “time ffmpeg -vcodec libvpx or vp8 -i input -vsync 0 -an -f null -”. We all used the latest SVN FFmpeg at the time of this posting ; the last revision optimizing the VP8 decoder was r24471.

  

  As these benchmarks show, ffvp8 is clearly much faster than libvpx, particularly on 64-bit. It’s even faster by a large margin on Atom, despite the fact that we haven’t even begun optimizing for it. In many cases, ffvp8′s extra speed can make the difference between a video that plays and one that doesn’t, especially in modern browsers with software compositing engines taking up a lot of CPU time. Want to get faster playback of VP8 videos ? The next versions of FFmpeg-based players, like VLC, will include ffvp8. Want to get faster playback of WebM in your browser ? Lobby your browser developers to use ffvp8 instead of libvpx. I expect Chrome to switch first, as they already use libavcodec for most of their playback system.

  Keep in mind ffvp8 is not “done” — we will continue to improve it and make it faster. We still have a number of optimizations in the pipeline that aren’t committed yet.

  Developing ffvp8

  The initial challenge, primarily pioneered by David and Ronald, was constructing the core decoder and making it bit-exact to libvpx. This was rather challenging, especially given the lack of a real spec. Many parts of the spec were outright misleading and contradicted libvpx itself. It didn’t help that the suite of official conformance tests didn’t even cover all the features used by the official encoder ! We’ve already started adding our own conformance tests to deal with this. But I’ve complained enough in past posts about the lack of a spec ; let’s get onto the gritty details.

  The next step was adding SIMD assembly for all of the important DSP functions. VP8′s motion compensation and deblocking filter are by far the most CPU-intensive parts, much the same as in H.264. Unlike H.264, the deblocking filter relies on a lot of internal saturation steps, which are free in SIMD but costly in a normal C implementation, making the plain C code even slower. Of course, none of this is a particularly large problem ; any sane video decoder has all this stuff in SIMD.

  I tutored Ronald in x86 SIMD and wrote most of the motion compensation, intra prediction, and some inverse transforms. Ronald wrote the rest of the inverse transforms and a bit of the motion compensation. He also did the most difficult part : the deblocking filter. Deblocking filters are always a bit difficult because every one is different. Motion compensation, by comparison, is usually very similar regardless of video format ; a 6-tap filter is a 6-tap filter, and most of the variation going on is just the choice of numbers to multiply by.

  The biggest challenge in an SIMD deblocking filter is to avoid unpacking, that is, going from 8-bit to 16-bit. Many operations in deblocking filters would naively appear to require more than 8-bit precision. A simple example in the case of x86 is abs(a-b), where a and b are 8-bit unsigned integers. The result of “a-b” requires a 9-bit signed integer (it can be anywhere from -255 to 255), so it can’t fit in 8-bit. But this is quite possible to do without unpacking : (satsub(a,b) | satsub(b,a)), where “satsub” performs a saturating subtract on the two values. If the value is positive, it yields the result ; if the value is negative, it yields zero. Oring the two together yields the desired result. This requires 4 ops on x86 ; unpacking would probably require at least 10, including the unpack and pack steps.

  After the SIMD came optimizing the C code, which still took a significant portion of the total runtime. One of my biggest optimizations was adding aggressive “smart” prefetching to reduce cache misses. ffvp8 prefetches the reference frames (PREVIOUS, GOLDEN, and ALTREF)… but only the ones which have been used reasonably often this frame. This lets us prefetch everything we need without prefetching things that we probably won’t use. libvpx very often encodes frames that almost never (but not quite never) use GOLDEN or ALTREF, so this optimization greatly reduces time spent prefetching in a lot of real videos. There are of course countless other optimizations we made that are too long to list here as well, such as David’s entropy decoder optimizations. I’d also like to thank Eli Friedman for his invaluable help in benchmarking a lot of these changes.

  What next ? Altivec (PPC) assembly is almost nonexistent, with the only functions being David’s motion compensation code. NEON (ARM) is completely nonexistent : we’ll need that to be fast on mobile devices as well. Of course, all this will come in due time — and as always — patches welcome !

  Appendix : the raw numbers

  Here’s the raw numbers (in fps) for the graphs at the start of this post, with standard error values :

  Core i7 620QM (1.6Ghz), Windows 7, 32-bit :
  Parkjoy ffvp8 : 44.58 0.44
  Parkjoy libvpx : 33.06 0.23
  Sintel ffvp8 : 74.26 1.18
  Sintel libvpx : 56.11 0.96

  Core i5 520M (2.4Ghz), Linux, 64-bit :
  Parkjoy ffvp8 : 68.29 0.06
  Parkjoy libvpx : 41.06 0.04
  Sintel ffvp8 : 112.38 0.37
  Sintel libvpx : 69.64 0.09

  Core 2 T9300 (2.5Ghz), Mac OS X 10.6.4, 64-bit :
  Parkjoy ffvp8 : 54.09 0.02
  Parkjoy libvpx : 33.68 0.01
  Sintel ffvp8 : 87.54 0.03
  Sintel libvpx : 52.74 0.04

  Core Duo (2Ghz), Mac OS X 10.6.4, 32-bit :
  Parkjoy ffvp8 : 21.31 0.02
  Parkjoy libvpx : 17.96 0.00
  Sintel ffvp8 : 41.24 0.01
  Sintel libvpx : 29.65 0.02

  Atom N270 (1.6Ghz), Linux, 32-bit :
  Parkjoy ffvp8 : 15.29 0.01
  Parkjoy libvpx : 12.46 0.01
  Sintel ffvp8 : 26.87 0.05
  Sintel libvpx : 20.41 0.02