Recherche avancée

Sur d’autres sites (7198)

• Leading Google Analytics alternative, Matomo, parodies Christopher Nolan blockbuster ahead of the UA sunset

  4 juillet 2023, par Erin — Press Releases

  Wellington, New Zealand, 4 July 2023 : In the world of online data, Google Analytics has long reigned supreme. Its dominance has been unquestioned, leaving website owners with little choice but to rely on the tech giant for their data insights. However, a new dawn in web analytics is upon us, and Matomo, the leading alternative to Google Analytics, is seizing a unique opportunity to position itself as the go-to provider. In a bold move, Matomo has launched a parody trailer, “Googleheimer,” humorously taking a satirical swipe at Google in the style of the upcoming Oppenheimer biopic by Christopher Nolan.

  Capitalising on a time-bound decision

  With an important decision looming for marketers and web specialists who need to switch analytics providers by July 1st, Matomo has found the perfect window to capture their attention.

  The urgency of the situation, combined with the high intent to switch providers, sets the stage for Matomo to establish itself as the leading alternative analytics platform of choice.

  Matomo’s parody trailer addresses the frustrations of GA4 head-on by highlighting the issues and the uncertainties caused by the sunset of Universal Analytics in humorous satire with lines such as :

  “But we’re keeping everyone’s data, right ? Right ?? …RIGHT ?!”

  Riding on the coat tails of this summer’s anticipated blockbuster from Christopher Nolan, Matomo openly points at the downsides of GA4, and reflects many frustrated marketers pain points in an entertaining way. Beneath the comedic and satirical tone lies the message that users have choices, and no longer need to surrender to the behemoth incumbent.

  Matomo was founded to challenge the status quo and provide a solution for those who believe in privacy and in ethical analytics, and who prefer that their customer data not be concentrated in the hands of just a few corporations.

  Watch the full trailer here. 


  About Matomo
  

  Matomo is a world-leading open-source privacy-friendly ethical web analytics platform, trusted by over 1.4 million websites in 190 countries and translated into over 50 languages. Matomo helps businesses and organisations track and optimise their online presence allowing users to easily collect, analyse, and act on their website and marketing data to gain a deeper understanding of their visitors and drive conversions and revenue. Matomo’s vision is to create, as a community, the leading open digital analytics platform that gives every user complete control of their data.

  Visit matomo.org for more information.




  More on Google Analytics changes



  A new dawn in web analytics is upon us, and Matomo – the leading alternative to Google Analytics – is here for it. After 20 years, Google is blowing up Universal Analytics (or GA3) – and taking your data with it. Inspired by Christopher Nolan’s upcoming biopic about physicist J. Robert Oppenheimer and the making of his atomic bomb (also known as “The Manhattan Project”), this parody trailer openly points to Google and draws the comparison in humorous satire. GA4 comes with a new set of metrics, setups and reports that change how you analyse your data.

• Ffmpeg configuration to stream the frames of my webcam

  6 juillet 2023, par Ridweng

  I'm trying to build a server in NodeJs to stream in RTSP my webcam using Angular to retrieve the frames and connecting using websockets. The server side is using "express-ws" module to create the Websocket.

  


  I was successfull in sending the frames from the webcam to the server in base64, the server is receiving these messages from a function on interval of (1000 / 30)ms.

  


  The issue relies on the implementation of my Ffmpeg child process. I retrieve the message and convert it into a buffer to then write this in the function of Ffmpeg.

  


  My current implementation is this one :

  


  const { spawn } = require('child_process');
exports.stream =  (ws ,req) => {
    try{
        const mess = `connection from: ${req._remoteAddress} at ${req._startTime}.`
        const initialMess =`Started ${mess}`
        ws.uuid = uuidv4()
        console.log(initialMess)

        ws.on('message', function incoming(message) {
            message = JSON.parse(message)
            console.log(`Res: ${message.width} x ${message.height}`);
            const ffmpeg = spawn('ffmpeg', [
                '-f', 'rawvideo',
                '-pixel_format', 'rgb24',
                '-video_size', `${message.width}x${message.height}`,
                '-framerate', `${message.framerate}`,
                '-i', '-',
                '-codec:v', 'libx264',
                '-preset', 'ultrafast',
                '-tune', 'zerolatency',
                '-f', 'rtsp',
                'rtsp://127.0.0.1:554/rtsp/stream',
            ]);
            const base64Data = message.video;
            const videoData = Buffer.from(base64Data, 'base64');

            ffmpeg.stdin.write(videoData);
            ffmpeg.stdin.end();
            
            ffmpeg.stderr.on('data', (data) => {
                console.error(`FFmpeg : ${data}`);
                });

            ffmpeg.on('exit', (code, signal) => {
                if (dev) console.log(`FFmpeg process exited with code ${code} and signal ${signal}`);
        
                // Close the WebSocket connection
                ws.close();
                });
        });
        ws.on('close', () => {
            const finalMess = `Stopped ${mess}`
            rem(ws.uuid)
            console.log(finalMess)
        })
    }catch(err){
        console.log(err)
    }
}


  


  In terms of the message received, this is the Angular side sending the message :

  


  const imageData = this.canvas.toDataURL('image/jpeg');
socket.send(JSON.stringify({video: imageData, width: this.canvas.width, height: this.canvas.height, framerate: interval }));


  


  The interval variable is the divisor of the interval that is triggering the function (in this case 30).

  


  I'm currently receiving the error message from Ffmpeg :

  


  ffmpeg version 6.0 Copyright (c) 2000-2023 the FFmpeg developers
  built with Apple clang version 14.0.3 (clang-1403.0.22.14.1)

FFmpeg :   configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/6.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100

FFmpeg : [rawvideo @ 0x150005ff0] Packet corrupt (stream = 0, dts = 0).

FFmpeg : Input #0, rawvideo, from 'fd:':
  Duration: N/A, start: 0.000000, bitrate: 221184 kb/s
  Stream #0:0: Video: rawvideo (RGB[24] / 0x18424752), rgb24, 640x480, 221184 kb/s, 30 tbr, 30 tbn

FFmpeg : Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))

FFmpeg : fd:: corrupt input packet in stream 0
[rawvideo @ 0x14ef24290] Invalid buffer size, packet size 76343 < expected frame_size 921600

FFmpeg : Error while decoding stream #0:0: Invalid argument

FFmpeg : [libx264 @ 0x14ef25a20] using cpu capabilities: ARMv8 NEON

FFmpeg : [libx264 @ 0x14ef25a20] profile High 4:4:4 Predictive, level 3.0, 4:4:4, 8-bit

FFmpeg : [libx264 @ 0x14ef25a20] 264 - core 164 r3095 baee400 - H.264/MPEG-4 AVC codec - Copyleft 2003-2022 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=6 threads=7 lookahead_threads=7 sliced_threads=1 slices=7 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=0

FFmpeg : [tcp @ 0x1500078a0] Connection to tcp://127.0.0.1:554?timeout=0 failed: Connection refused
[out#0/rtsp @ 0x14ef24b00] Could not write header (incorrect codec parameters ?): Connection refused

FFmpeg : [vost#0:0/libx264 @ 0x14ef256d0] Error initializing output stream: 

FFmpeg : Conversion failed!

FFmpeg process exited with code 1 and signal null


  


  This is the reason I believe the issue relies on the configuration of Ffmpeg and how to set it for this case. It would be great to being able to play this RTSP link in my VLC to conclude it as successfull.

  


  I would apreciate any suggestions or guidence.
Thanks in advance.

  


• Invalid data found when processing input for mp3 file in ffmpeg

  15 juillet 2023, par Sai Chaithanya

  My custom compiled FFmpeg build is unable to read mp3 files, suddenly. Interestingly, the custom compiled FFmpeg build generated the mp3 file. For the past 1 year, it was successfully reading the file. I checked with the official FFmpeg build, and it works, so at least the file is not corrupted.

  


  Official FFmpeg Build output :

  


  ffmpeg version 6.0 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 11 (Ubuntu 11.3.0-1ubuntu1~22.04.1)
configuration: --arch=x86_64 --target-os=linux --disable-network --enable-small --disable-doc 
               --disable-manpages --enable-static --disable-shared --disable-ffprobe 
               --disable-ffplay --enable-lto --prefix=/home/greninja/Downloads/custom_build 
               --extra-cflags='-I/home/greninja/Downloads/custom_build/include -O3 -flto' 
               --extra-ldflags=-L/home/greninja/Downloads/custom_build/lib
libavutil      58.  2.100 / 58.  2.100
libavcodec     60.  3.100 / 60.  3.100
libavformat    60.  3.100 / 60.  3.100
libavdevice    60.  1.100 / 60.  1.100
libavfilter     9.  3.100 /  9.  3.100
libswscale      7.  1.100 /  7.  1.100
libswresample   4. 10.100 /  4. 10.100
Input #0, mp3, from './test.mp3':
  Metadata:
    major_brand     : dash
    minor_version   : 0
    compatible_brands: iso6mp41
    encoder         : Lavf59.33.100
Duration: 00:03:07.09, start: 0.025057, bitrate: 192 kb/s
Stream #0:0: Audio: mp3, 44100 Hz, stereo, fltp, 192 kb/s
  Metadata:
    encoder         : Lavc59.46
At least one output file must be specified


  


  My Custom FFmpeg build output :

  


  ffmpeg version N-108341-gb1a68127bb Copyright (c) 2000-2022 the FFmpeg developers
built with gcc 9 (Ubuntu 9.4.0-1ubuntu1~20.04.1)
configuration: --arch=x86_64 --target-os=linux --disable-everything --disable-network 
               --disable-autodetect --enable-small --disable-debug --disable-doc 
               --disable-manpages --enable-static --disable-shared 
               --enable-decoder='aac*,ac3*,opus,vorbis,mjpeg' 
               --enable-demuxer='mov,m4v,matroska,image2' --enable-protocol=file 
               --enable-muxer='mp3,mp4,webm,null' --enable-libmp3lame 
               --enable-encoder=libmp3lame --enable-filter=aresample --enable-logging 
               --enable-pthreads --enable-parser='vorbis,opus,vp9,vp8,mpegaudio,mpegvideo,mpeg4video,ac3*,aac*,mjpeg,h264' 
               --disable-ffprobe --disable-ffplay --enable-lto 
               --prefix=/home/wade/Downloads/custom_build 
               --extra-cflags='-I/home/wade/Downloads/custom_build/include -O3 -flto' 
               --extra-ldflags=-L/home/wade/Downloads/custom_build/lib
libavutil      57. 36.102 / 57. 36.102
libavcodec     59. 46.100 / 59. 46.100
libavformat    59. 33.100 / 59. 33.100
libavdevice    59.  8.101 / 59.  8.101
libavfilter     8. 49.100 /  8. 49.100
libswscale      6.  8.112 /  6.  8.112
libswresample   4.  9.100 /  4.  9.100
./test.mp3: Invalid data found when processing input


  


  What configuration am I missing ?