Recherche avancée

Sur d’autres sites (11063)

• RaspberryPi HLS streaming with nginx and ffmpeg ; v4l2 error : ioctl(VIDIOC_STREAMON) : Protocol error

  22 janvier 2021, par Mirco Weber

  I'm trying to realize a baby monitoring with a Raspberry Pi (Model 4B, 4GB RAM) and an ordinary Webcam (with integrated Mic).
I followed this Tutorial : https://github.com/DeTeam/webcam-stream/blob/master/Tutorial.md

  


  Shortly described :

  


  

  1. I installed and configured an nginx server with rtmp module enabled.

  


  2. I installed ffmpeg with this configuration —enable-gpl —enable-nonfree —enable-mmal —enable-omx-rpi

  


  3. I tried to stream ;)

  


  


  The configuration of nginx seems to be working (sometimes streaming works, the server starts without any complication and when the server is up and running, the webpage is displayed).
The configuration of ffmpeg seems to be fine as well, since streaming sometimes works...

  


  I was trying a couple of different ffmpeg-commands ; all of them are sometimes working and sometimes resulting in an error.
The command looks like following :

  


  ffmpeg -re
-f v4l2
-i /dev/video0
-f alsa
-ac 1
-thread_queue_size 4096
-i hw:CARD=Camera,DEV=0
-profile:v high
-level:v 4.1
-vcodec h264_omx
-r 10
-b:v 512k
-s 640x360
-acodec aac
-strict
-2
-ac 2
-ab 32k
-ar 44100
-f flv
rtmp://localhost/show/stream;


  


  Note : I rearranged the code to make it easier to read. In the terminal, it is all in one line.
Note : There is no difference when using -f video4linux2 instead of -f v4l2

  


  The camera is recognized by the system :

  


  pi@raspberrypi:~ $ v4l2-ctl --list-devices
bcm2835-codec-decode (platform:bcm2835-codec):
    /dev/video10
    /dev/video11
    /dev/video12

bcm2835-isp (platform:bcm2835-isp):
    /dev/video13
    /dev/video14
    /dev/video15
    /dev/video16

HD Web Camera: HD Web Camera (usb-0000:01:00.0-1.2):
    /dev/video0
    /dev/video1


  


  When only using -i /dev/video0, audio transmission never worked.
The output of arecord -L was :

  


  pi@raspberrypi:~ $ arecord -L
default
    Playback/recording through the PulseAudio sound server
null
    Discard all samples (playback) or generate zero samples (capture)
jack
    JACK Audio Connection Kit
pulse
    PulseAudio Sound Server
usbstream:CARD=Headphones
    bcm2835 Headphones
    USB Stream Output
sysdefault:CARD=Camera
    HD Web Camera, USB Audio
    Default Audio Device
front:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    Front speakers
surround21:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    Direct sample mixing device
dsnoop:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    Direct sample snooping device
hw:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    Direct hardware device without any conversions
plughw:CARD=Camera,DEV=0
    HD Web Camera, USB Audio
    Hardware device with all software conversions
usbstream:CARD=Camera
    HD Web Camera
    USB Stream Output


  


  that's why i added -i hw:CARD=Camera,DEV=0.

  


  As mentioned above, it worked very well a couple of times with this configuration and commands.
But very often, i get the following error message when starting to stream :

  


  pi@raspberrypi:~ $ ffmpeg -re -f video4linux2 -i /dev/video0 -f alsa -ac 1 -thread_queue_size 4096 -i hw:CARD=Camera,DEV=0 -profile:v high -level:v 4.1 -vcodec h264_omx -r 10 -b:v 512k -s 640x360 -acodec aac -strict -2 -ac 2 -ab 32k -ar 44100 -f flv rtmp://localhost/show/stream
ffmpeg version N-100673-g553eb07737 Copyright (c) 2000-2021 the FFmpeg developers
  built with gcc 8 (Raspbian 8.3.0-6+rpi1)
  configuration: --enable-gpl --enable-nonfree --enable-mmal --enable-omx-rpi --extra-ldflags=-latomic
  libavutil      56. 63.101 / 56. 63.101
  libavcodec     58.117.101 / 58.117.101
  libavformat    58. 65.101 / 58. 65.101
  libavdevice    58. 11.103 / 58. 11.103
  libavfilter     7. 96.100 /  7. 96.100
  libswscale      5.  8.100 /  5.  8.100
  libswresample   3.  8.100 /  3.  8.100
  libpostproc    55.  8.100 / 55.  8.100
[video4linux2,v4l2 @ 0x2ea4600] ioctl(VIDIOC_STREAMON): Protocol error
/dev/video0: Protocol error


  


  And when I'm swithing to /dev/video1 (since this was also an output for v4l2-ctl --list-devices), I get the following error message :

  


  pi@raspberrypi:~ $ ffmpeg -re -f v4l2 -i /dev/video1 -f alsa -ac 1 -thread_queue_size 4096 -i hw:CARD=Camera,DEV=0 -profile:v high -level:v 4.1 -vcodec h264_omx -r 10 -b:v 512k -s 640x360 -acodec aac -strict -2 -ac 2 -ab 32k -ar 44100 -f flv rtmp://localhost/show/stream
ffmpeg version N-100673-g553eb07737 Copyright (c) 2000-2021 the FFmpeg developers
  built with gcc 8 (Raspbian 8.3.0-6+rpi1)
  configuration: --enable-gpl --enable-nonfree --enable-mmal --enable-omx-rpi --extra-ldflags=-latomic
  libavutil      56. 63.101 / 56. 63.101
  libavcodec     58.117.101 / 58.117.101
  libavformat    58. 65.101 / 58. 65.101
  libavdevice    58. 11.103 / 58. 11.103
  libavfilter     7. 96.100 /  7. 96.100
  libswscale      5.  8.100 /  5.  8.100
  libswresample   3.  8.100 /  3.  8.100
  libpostproc    55.  8.100 / 55.  8.100
[video4linux2,v4l2 @ 0x1aa4610] ioctl(VIDIOC_G_INPUT): Inappropriate ioctl for device
/dev/video1: Inappropriate ioctl for device


  


  When using the video0 input, the webcam's LED that recognizes an access is constantly on. When using video1not.

  


  After hours and days of googling and tears and whiskey, for the sake of my liver, my marriage and my physical and mental health, I'm very sincerly asking for your help...
What the f**k is happening and what can I do to make it work ???

  


  Thanks everybody :)

  


  UPDATE 1 :

  


  

  1. using the full path to ffmpeg does not change anything...

  


  2. /dev/video0 and /dev/video1 have access rights for everybody

  


  3. sudo ffmpeg ... does not change anything as well

  


  4. the problem seems to be at an "early stage". Stripping the command down to ffmpeg -i /dev/video0 results in the same problem

  


  


  UPDATE 2 :
  
It seems that everything is working when I first start another Application that needs access to the webcam and then ffmpeg...
Might be some driver issue, but when I'm looking for loaded modules with lsmod, there is absolutely no change before and after I started the application...
Any help still appreciated...

  


  UPDATE 3 :
  
I was checking the output of dmesg.
  
When I started the first application I received this message :
  
uvcvideo: Failed to query (GET_DEF) UVC control 12 on unit 2: -32 (exp. 4).

  And when I started ffmpeg, nothing happend but everything worked...

  


• Laravel / ffmpeg headers not found on centos 7

  24 septembre 2023, par Jack The Baker

  I want to use ffmpeg on laravel project. OS is centos7 and panel is DirectAdmin and using php 8.1

  


  


  PHP Version 8.1.12

  


  


  I installed ffmpeg on centos 7 and I get ffmpeg

  


  ffmpeg version 3.4.13 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 4.8.5 (GCC) 20150623 (Red Hat 4.8.5-44)
configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --docdir=/usr/share/doc/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --optflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic' --extra-ldflags='-Wl,-z,relro ' --extra-cflags=' ' --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvo-amrwbenc --enable-version3 --enable-bzlib --disable-crystalhd --enable-fontconfig --enable-gcrypt --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libcdio --enable-libdrm --enable-indev=jack --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libmp3lame --enable-nvenc --enable-openal --enable-opencl --enable-opengl --enable-libopenjpeg --enable-libopus --disable-encoder=libopus --enable-libpulse --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvidstab --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-libzvbi --enable-avfilter --enable-avresample --enable-libmodplug --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-libmfx --enable-runtime-cpudetect
libavutil      55. 78.100 / 55. 78.100
libavcodec     57.107.100 / 57.107.100
libavformat    57. 83.100 / 57. 83.100
libavdevice    57. 10.100 / 57. 10.100
libavfilter     6.107.100 /  6.107.100
libavresample   3.  7.  0 /  3.  7.  0
libswscale      4.  8.100 /  4.  8.100
libswresample   2.  9.100 /  2.  9.100
libpostproc    54.  7.100 / 54.  7.100


  


  But in phpinfo and php -m ffmpeg not listed ! yet so I noticed should configure ffmpeg on php then I run :

  


  ./configure && make


  


  on /usr/ffmpeg/ffmpeg-php-0.6.0

  


  But result is :

  


  


  checking for ffmpeg headers... configure : error : ffmpeg headers not
found. Make sure ffmpeg is compiled as shared libraries using the
—enable-shared option

  


  


  Then I run :

  


  ./configure --enable-shared


  


  But still the same error.

  


  In laravel project I got error :

  


  exception: "ErrorException"
file: "/home/site.com/public_html/laravel/vendor/php-ffmpeg/php-ffmpeg/src/Alchemy/BinaryDriver/AbstractBinary.php"
line: 149
message: "file_exists(): open_basedir restriction in effect. File(/usr/bin/ffmpeg) is not within the allowed path(s): (/home/admin/:/tmp/:/var/tmp/:/opt/alt/php81/usr/shar...


  


  After many hours searching and testing still I couldn't fix this issue, any suggestion ?

  


• Terminal : How to extract vobsub subtitles to bitmap images (jpg, png) ?

  5 août 2022, par DevonDahon

  How to extract image-based subtitles to bitmap images (jpg, png) ?

  


  I tried with ffmpeg, but it seems to work only with text-based subtitles.

  


  $ ffmpeg -i myvideo.mp4 -map "0:2" output.bre.srt
ffmpeg version 5.0.1 Copyright (c) 2000-2022 the FFmpeg developers
  built with Apple clang version 13.1.6 (clang-1316.0.21.2.5)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/5.0.1_3 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox
  libavutil      57. 17.100 / 57. 17.100
  libavcodec     59. 18.100 / 59. 18.100
  libavformat    59. 16.100 / 59. 16.100
  libavdevice    59.  4.100 / 59.  4.100
  libavfilter     8. 24.100 /  8. 24.100
  libswscale      6.  4.100 /  6.  4.100
  libswresample   4.  3.100 /  4.  3.100
  libpostproc    56.  3.100 / 56.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'myvideo.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: mp42iso2avc1mp41
    creation_time   : 2022-08-03T21:58:07.000000Z
    encoder         : HandBrake 1.5.1 2022011000
  Duration: 00:11:05.40, start: 0.000000, bitrate: 1635 kb/s
  Stream #0:0[0x1](und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, smpte170m/bt470bg/bt470bg, progressive), 712x576 [SAR 16:15 DAR 178:135], 1454 kb/s, 25 fps, 25 tbr, 90k tbn (default)
    Metadata:
      creation_time   : 2022-08-03T21:58:07.000000Z
      handler_name    : VideoHandler
      vendor_id       : [0][0][0][0]
  Stream #0:1[0x2](bre): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s (default)
    Metadata:
      creation_time   : 2022-08-03T21:58:07.000000Z
      handler_name    : Stereo
      vendor_id       : [0][0][0][0]
  Stream #0:2[0x3](bre): Subtitle: dvd_subtitle (mp4s / 0x7334706D), 720x576, 6 kb/s (default)
    Metadata:
      creation_time   : 2022-08-03T21:58:07.000000Z
      handler_name    : Brezhoneg
  Stream #0:3[0x4](fra): Subtitle: dvd_subtitle (mp4s / 0x7334706D), 720x576, 6 kb/s
    Metadata:
      creation_time   : 2022-08-03T21:58:07.000000Z
      handler_name    : Français
Error initializing output stream 0:0 -- Subtitle encoding currently only possible from text to text or bitmap to bitmap
Stream mapping:
  Stream #0:2 -> #0:0 (dvd_subtitle (dvdsub) -> subrip (srt))
    Last message repeated 1 times