Recherche avancée

Sur d’autres sites (6870)

• ffmpeg minimal linux build with only one filter [closed]

  31 juillet 2024, par at8993

  I am aiming to compile a minimal build of ffmpeg for Ubuntu 22.04. The application requires only the concat filter for .mp4s using H.264 video encoder.

  


  I have followed this guide and used the following commands to include libx264 only :

  


  sudo apt-get update -qq && sudo apt-get -y install \
  autoconf \
  automake \
  build-essential \
  cmake \
  git-core \
  libass-dev \
  libfreetype6-dev \
  libgnutls28-dev \
  libmp3lame-dev \
  libsdl2-dev \
  libtool \
  libva-dev \
  libvdpau-dev \
  libvorbis-dev \
  libxcb1-dev \
  libxcb-shm0-dev \
  libxcb-xfixes0-dev \
  meson \
  ninja-build \
  pkg-config \
  texinfo \
  wget \
  yasm \
  zlib1g-dev

mkdir -p ~/ffmpeg_sources ~/bin

sudo apt-get install libx264-dev


  


  and for the configure command I have used the following options with a view to only enable what's necessary for concat.

  


  cd ~/ffmpeg_sources && \
wget -O ffmpeg-snapshot.tar.bz2 https://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2 && \
tar xjvf ffmpeg-snapshot.tar.bz2 && \
cd ffmpeg && \

PATH="$HOME/bin:$PATH" PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure \
  --prefix="$HOME/ffmpeg_build" \
  --pkg-config-flags="--static" \
  --extra-cflags="-I$HOME/ffmpeg_build/include" \
  --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
  --extra-libs="-lpthread -lm" \
  --ld="g++" \
  --bindir="$HOME/bin" \
  --disable-everything \
  --enable-filter=concat \
  --enable-avformat \
  --enable-avdevice \
  --enable-avcodec \
  --enable-decoder=h264 
  --enable-libx264 
  --enable-muxer=mp4 
  --enable-gpl

PATH="$HOME/bin:$PATH" make && \
make install && \
hash -r


  


  However running

  


  ffmpeg -f concat -i files_to_merge.txt -c copy output.mp4


  


  returns error

  


  ffmpeg -f concat -i files_to_merge.txt -c copy output.mp4
ffmpeg version N-116445-gb1d410716b Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 11 (Ubuntu 11.4.0-1ubuntu1~22.04)
  configuration: --prefix=/home/user/ffmpeg_build 
--extra-cflags=-I/home/user/ffmpeg_build/include --extra-ldflags=-L/home/user/ffmpeg_build/lib 
--extra-libs='-lpthread -lm' 
--ld=g++ --bindir=/home/user/bin --disable-everything 
--enable-filter=concat --enable-avformat 
--enable-avdevice --enable-avcodec --enable-decoder=h264
 --enable-libx264 --enable-muxer=mp4 
--enable-gpl
  libavutil      59. 30.100 / 59. 30.100
  libavcodec     61. 10.100 / 61. 10.100
  libavformat    61.  5.101 / 61.  5.101
  libavdevice    61.  2.100 / 61.  2.100
  libavfilter    10.  2.102 / 10.  2.102
  libswscale      8.  2.100 /  8.  2.100
  libswresample   5.  2.100 /  5.  2.100
  libpostproc    58.  2.100 / 58.  2.100
[in#0 @ 0x555605fab640] Unknown input format: 'concat'


  


  I assume this is due to the omission of an enable option in the configure command.

  


  Thanks !

  


• vcpkg error : BUILD_FAILED when "Getting CMake variables for x64-windows"

  24 août 2024, par Rok Benko

  I'm trying to install ffmpeg via vcpkg on Windows by running the following command :

  


  vcpkg.exe install ffmpeg

  


  The installation throws an error when getting CMake variables for x64-windows.

  


  -- Getting CMake variables for x64-windows
CMake Error at scripts/cmake/vcpkg_execute_required_process.cmake:127 (message):
    Command failed: "C:/Program Files/Microsoft Visual Studio/2022/Community/Common7/IDE/CommonExtensions/Microsoft/CMake/Ninja/ninja.exe" -v
    Working Directory: C:/Users/xxxxx/vcpkg/buildtrees/pkgconf/x64-windows-rel/vcpkg-parallel-configure
    Error code: 1
    See logs for more information:
      C:\Users\xxxxx\vcpkg\buildtrees\pkgconf\cmake-get-vars-x64-windows-dbg-CMakeCache.txt.log
      C:\Users\xxxxx\vcpkg\buildtrees\pkgconf\cmake-get-vars-x64-windows-rel-CMakeCache.txt.log
      C:\Users\xxxxx\vcpkg\buildtrees\pkgconf\cmake-get-vars-x64-windows-dbg-CMakeConfigureLog.yaml.log
      C:\Users\xxxxx\vcpkg\buildtrees\pkgconf\cmake-get-vars-x64-windows-rel-CMakeConfigureLog.yaml.log
      C:\Users\xxxxx\vcpkg\buildtrees\pkgconf\cmake-get-vars-x64-windows-out.log

Call Stack (most recent call first):
  installed/x64-windows/share/vcpkg-cmake/vcpkg_cmake_configure.cmake:269 (vcpkg_execute_required_process)
  installed/x64-windows/share/vcpkg-cmake-get-vars/vcpkg_cmake_get_vars.cmake:15 (vcpkg_cmake_configure)
  installed/x64-windows/share/vcpkg-tool-meson/vcpkg_configure_meson.cmake:323 (vcpkg_cmake_get_vars)
  installed/x64-windows/share/vcpkg-tool-meson/vcpkg_configure_meson.cmake:458 (vcpkg_generate_meson_cmd_args)
  ports/pkgconf/portfile.cmake:9 (vcpkg_configure_meson)
  scripts/ports.cmake:192 (include)


error: building pkgconf:x64-windows failed with: BUILD_FAILED
See https://learn.microsoft.com/vcpkg/troubleshoot/build-failures?WT.mc_id=vcpkg_inproduct_cli for more information.
Elapsed time to handle pkgconf:x64-windows: 1.9 s
Please ensure you're using the latest port files with `git pull` and `vcpkg update`.
Then check for known issues at:
  https://github.com/microsoft/vcpkg/issues?q=is%3Aissue+is%3Aopen+in%3Atitle+pkgconf
You can submit a new issue at:
  https://github.com/microsoft/vcpkg/issues/new?title=xxxxx


  


  What does this error mean ? The suggested git pull and vcpkg update didn't solve the error. The directory is up to date.

  


  PS : I opened logs, but I have no idea how to solve the error. I don't understand them.

  


• How do I get drawtext filter in ffmpeg to work on ubuntu 22.04 ?

  3 décembre 2024, par chovy

  Here's my script, but no matter what I try the drawtext filter is not enabled :

  


  #!/bin/bash

set -e  # Exit on any error

# Define installation directories
INSTALL_DIR="$HOME/ffmpeg_build"
BIN_DIR="$HOME/bin"
SOURCE_DIR="$HOME/ffmpeg_sources"
NUM_CORES=$(nproc)

echo "Creating necessary directories..."
mkdir -p "$INSTALL_DIR" "$BIN_DIR" "$SOURCE_DIR"

# Install required tools and dependencies
echo "Installing build tools and essential libraries..."
sudo apt-get update
sudo apt-get install -y \
  autoconf automake build-essential cmake git-core libass-dev \
  libfreetype6-dev libsdl2-dev libtool libva-dev libvdpau-dev \
  libvorbis-dev libxcb1-dev libxcb-shm0-dev libxcb-xfixes0-dev \
  meson ninja-build pkg-config texinfo wget yasm zlib1g-dev \
  nasm libnuma-dev libfdk-aac-dev libmp3lame-dev libopus-dev \
  libfreetype6 libdrm-dev mercurial

# Remove system-installed x264 and x265 to prevent conflicts
sudo apt-get remove -y libx264-dev libx265-dev x264 x265

# Build dependencies
cd "$SOURCE_DIR"

# Install libx264 (static)
if [ ! -d "$SOURCE_DIR/x264" ]; then
  echo "Building and installing libx264..."
  git clone --branch stable --depth 1 https://code.videolan.org/videolan/x264.git
  cd x264
  make distclean || true
  ./configure --prefix="$INSTALL_DIR" --enable-static --disable-opencl
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libx265 (static)
if [ ! -d "$SOURCE_DIR/x265" ]; then
  echo "Building and installing libx265..."
  git clone --depth 1 https://github.com/videolan/x265.git
  cd x265/build/linux
  cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$INSTALL_DIR" \
    -DENABLE_SHARED=OFF -DENABLE_PIC=ON -DENABLE_PKGCONFIG=ON ../../source
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libvpx (static)
if [ ! -d "$SOURCE_DIR/libvpx" ]; then
  echo "Building and installing libvpx..."
  git clone --depth 1 https://chromium.googlesource.com/webm/libvpx.git
  cd libvpx
  ./configure --prefix="$INSTALL_DIR" --disable-examples --disable-unit-tests \
    --enable-vp9-highbitdepth --as=yasm --enable-static --enable-pic
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libopus (static)
if [ ! -d "$SOURCE_DIR/opus" ]; then
  echo "Building and installing libopus..."
  git clone --depth 1 https://github.com/xiph/opus.git
  cd opus
  ./autogen.sh
  ./configure --prefix="$INSTALL_DIR" --disable-shared
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Install libaom (static)
if [ ! -d "$SOURCE_DIR/aom" ]; then
  echo "Building and installing libaom..."
  git clone --depth 1 https://aomedia.googlesource.com/aom
  mkdir -p aom_build
  cd aom_build
  cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$INSTALL_DIR" \
    -DBUILD_SHARED_LIBS=0 -DENABLE_NASM=1 -DCMAKE_C_FLAGS="-fPIC" ../aom
  make -j$NUM_CORES
  make install
  cd "$SOURCE_DIR"
fi

# Build and install FFmpeg
echo "Building and installing FFmpeg..."
cd "$SOURCE_DIR"
if [ ! -d "$SOURCE_DIR/ffmpeg" ]; then
  git clone --depth 1 https://git.ffmpeg.org/ffmpeg.git ffmpeg
  cd ffmpeg
else
  cd ffmpeg
  git pull
fi

export PKG_CONFIG_PATH="$INSTALL_DIR/lib/pkgconfig:/usr/lib/pkgconfig:/usr/share/pkgconfig:/usr/lib/$(uname -m)-linux-gnu/pkgconfig:$PKG_CONFIG_PATH"

make distclean

./configure \
  --prefix="$INSTALL_DIR" \
  --pkg-config-flags="--static" \
  --extra-cflags="-I$INSTALL_DIR/include" \
  --extra-ldflags="-L$INSTALL_DIR/lib" \
  --extra-libs="-lpthread -lm" \
  --bindir="$BIN_DIR" \
  --enable-gpl \
  --enable-nonfree \
  --enable-libfreetype \
  --enable-libx264 \
  --enable-libvpx \
  --enable-libmp3lame \
  --enable-libopus \
  --enable-libass \
  --enable-libvorbis \
  --enable-libaom \
  --enable-libdrm \
  --enable-version3 \
  --enable-static \
  --disable-shared \
  --enable-small
  
make -j$NUM_CORES
make install

# Add ffmpeg to PATH
echo "export PATH=\"$BIN_DIR:\$PATH\"" >> "$HOME/.bashrc"
source "$HOME/.bashrc"

# Final checks
echo "FFmpeg installation complete. Verifying installation..."
ffmpeg -version



  


  Here is my buildconf which appears correct :

  


  $ ffmpeg -buildconf  

ffmpeg version N-117989-gcb27e478f7 Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 11 (Ubuntu 11.4.0-1ubuntu1~22.04)
  configuration: --prefix=/usr/local --extra-cflags=-I/home/ubuntu/src/ffmpeg_build/include --extra-ldflags=-L/home/ubuntu/src/ffmpeg_build/lib --bindir=/usr/local/bin --enable-gpl --enable-nonfree --enable-libfreetype --enable-libx264 --enable-libvpx --enable-libmp3lame --enable-libopus --enable-libass --enable-libvorbis --enable-libaom --enable-libdrm --enable-version3 --enable-shared --enable-filter=drawtext  libavutil      59. 47.101 / 59. 47.101  libavcodec     61. 26.100 / 61. 26.100  libavformat    61.  9.100 / 61.  9.100  libavdevice    61.  4.100 / 61.  4.100  libavfilter    10.  6.101 / 10.  6.101  libswscale      8. 12.100 /  8. 12.100  libswresample   5.  4.100 /  5.  4.100
  libpostproc    58.  4.100 / 58.  4.100

  configuration:    --prefix=/usr/local
    --extra-cflags=-I/home/ubuntu/src/ffmpeg_build/include
    --extra-ldflags=-L/home/ubuntu/src/ffmpeg_build/lib
    --bindir=/usr/local/bin
    --enable-gpl    --enable-nonfree    --enable-libfreetype    --enable-libx264    --enable-libvpx    --enable-libmp3lame    --enable-libopus    --enable-libass    --enable-libvorbis    --enable-libaom    --enable-libdrm    --enable-version3    --enable-shared    --enable-filter=drawtext


  


  However the filter drawtext is not enabled :

  


  $ ffmpeg -filters | grep drawtext
ffmpeg version N-117989-gcb27e478f7 Copyright (c) 2000-2024 the FFmpeg developers  built with gcc 11 (Ubuntu 11.4.0-1ubuntu1~22.04)  configuration: --prefix=/usr/local --extra-cflags=-I/home/ubuntu/src/ffmpeg_build/include --extra-ldflags=-L/home/ubuntu/src/ffmpeg_build/lib --bindir=/usr/local/bin --enable-gpl --enable-nonfree --enable-libfreetype --enable-libx264 --enable-libvpx --enable-libmp3lame --enable-libopus --enable-libass --enable-libvorbis --enable-libaom --enable-libdrm --enable-version3 --enable-shared --enable-filter=drawtext  libavutil      59. 47.101 / 59. 47.101  libavcodec     61. 26.100 / 61. 26.100  libavformat    61.  9.100 / 61.  9.100  libavdevice    61.  4.100 / 61.  4.100  libavfilter    10.  6.101 / 10.  6.101  libswscale      8. 12.100 /  8. 12.100  libswresample   5.  4.100 /  5.  4.100  libpostproc    58.  4.100 / 58.  4.100