Sur d’autres sites (7176)

• Files created with "ffmpeg hevc_nvenc" do not play on TV. (with video codec SDK 9.1 of nvidia)

  29 janvier 2020, par Dashhh

  Problem

  • Files created with hevc_nvenc do not play on TV. (samsung smart tv, model unknown)
    Related to my ffmpeg build is below.

  FFmpeg build conf

  $ ffmpeg -buildconf
  
      --enable-cuda
  
      --enable-cuvid
  
      --enable-nvenc
  
      --enable-nonfree
  
      --enable-libnpp
  
      --extra-cflags=-I/path/cuda/include
  
      --extra-ldflags=-L/path/cuda/lib64
  
      --prefix=/prefix/ffmpeg_build
  
      --pkg-config-flags=--static
  
      --extra-libs='-lpthread -lm'
  
      --extra-cflags=-I/prefix/ffmpeg_build/include
  
      --extra-ldflags=-L/prefix/ffmpeg_build/lib
  
      --enable-gpl
  
      --enable-nonfree
  
      --enable-version3
  
      --disable-stripping
  
      --enable-avisynth
  
      --enable-libass
  
      --enable-libfontconfig
  
      --enable-libfreetype
  
      --enable-libfribidi
  
      --enable-libgme
  
      --enable-libgsm
  
      --enable-librubberband
  
      --enable-libshine
  
      --enable-libsnappy
  
      --enable-libssh
  
      --enable-libtwolame
  
      --enable-libwavpack
  
      --enable-libzvbi
  
      --enable-openal
  
      --enable-sdl2
  
      --enable-libdrm
  
      --enable-frei0r
  
      --enable-ladspa
  
      --enable-libpulse
  
      --enable-libsoxr
  
      --enable-libspeex
  
      --enable-avfilter
  
      --enable-postproc
  
      --enable-pthreads
  
      --enable-libfdk-aac
  
      --enable-libmp3lame
  
      --enable-libopus
  
      --enable-libtheora
  
      --enable-libvorbis
  
      --enable-libvpx
  
      --enable-libx264
  
      --enable-libx265
  
      --disable-ffplay
  
      --enable-libopenjpeg
  
      --enable-libwebp
  
      --enable-libxvid
  
      --enable-libvidstab
  
      --enable-libopenh264
  
      --enable-zlib
  
      --enable-openssl

  ---

  ffmpeg Command

  • Command about FFmpeg encoding

  ffmpeg -ss 1800 -vsync 0 -hwaccel cuvid -hwaccel_device 0 \
  
  -c:v h264_cuvid -i /data/input.mp4 -t 10 \
  
  -filter_complex "\
  
  [0:v]hwdownload,format=nv12,format=yuv420p,\
  
  scale=iw*2:ih*2" -gpu 0 -c:v hevc_nvenc -pix_fmt yuv444p16le -preset slow -rc cbr_hq -b:v 5000k -maxrate 7000k -bufsize 1000k -acodec aac -ac 2 -dts_delta_threshold 1000 -ab 128k -flags global_header ./makevideo_nvenc_hevc.mp4

  Full log about This Command - check this full log

  The reason for adding "-color_ " in the command is as follows.

  • HDR video after creating bt2020 + smpte2084 video using nvidia hardware accelerator. (I’m studying to make HDR videos. I’m not sure if this is right.)

  How can I make a video using ffmpeg hevc_nvenc and have it play on TV ?

  ---

  Things i’ve done

  Here’s what I’ve researched about why it doesn’t work.
   The header information is not properly included in the resulting video file. So I used a program called nvhsp to add SEI and VUI information inside the video. See below for the commands and logs used.

  nvhsp is open source for writing VUI and SEI bitstrings in raw video. nvhsp link

  # make rawvideo for nvhsp
  
  $  ffmpeg -vsync 0 -hwaccel cuvid -hwaccel_device 0 -c:v h264_cuvid \
  
  -i /data/input.mp4 -t 10 \
  
  -filter_complex "[0:v]hwdownload,format=nv12,\
  
  format=yuv420p,scale=iw*2:ih*2" \
  
  -gpu 0 -c:v hevc_nvenc -f rawvideo output_for_nvhsp.265
  
  
  
  # use nvhsp
  
  $ python nvhsp.py ./output_for_nvhsp.265 -colorprim bt2020 \
  
  -transfer smpte-st-2084 -colormatrix bt2020nc \
  
  -maxcll "1000,300" -videoformat ntsc -full_range tv \
  
  -masterdisplay "G (13250,34500) B (7500,3000 ) R (34000,16000) WP (15635,16450) L (10000000,1)" \
  
  ./after_nvhsp_proc_output.265
  
  
  
  Parsing the infile:
  
  
  
  ==========================
  
  
  
  Prepending SEI data
  
  Starting new SEI NALu ...
  
  SEI message with MaxCLL = 1000 and MaxFall = 300 created in SEI NAL
  
  SEI message Mastering Display Data G (13250,34500) B (7500,3000) R (34000,16000) WP (15635,16450) L (10000000,1) created in SEI NAL
  
  Looking for SPS ......... [232, 22703552]
  
  SPS_Nals_addresses [232, 22703552]
  
  SPS NAL Size 488
  
  Starting reading SPS NAL contents
  
  Reading of SPS NAL finished. Read 448 of SPS NALu data.
  
  
  
  Making modified SPS NALu ...
  
  Made modified SPS NALu-OK
  
  New SEI prepended
  
  Writing new stream ...
  
  Progress: 100%
  
  =====================
  
  Done!
  
  
  
  File nvhsp_after_output.mp4 created.
  
  
  
  # after process
  
  $ ffmpeg -y -f rawvideo -r 25 -s 3840x2160 -pix_fmt yuv444p16le -color_primaries bt2020 -color_trc smpte2084  -colorspace bt2020nc -color_range tv -i ./1/after_nvhsp_proc_output.265 -vcodec copy  ./1/result.mp4 -hide_banner
  
  
  
  Truncating packet of size 49766400 to 3260044
  
  [rawvideo @ 0x40a6400] Estimating duration from bitrate, this may be inaccurate
  
  Input #0, rawvideo, from './1/nvhsp_after_output.265':
  
    Duration: N/A, start: 0.000000, bitrate: 9953280 kb/s
  
      Stream #0:0: Video: rawvideo (Y3[0][16] / 0x10003359), yuv444p16le(tv, bt2020nc/bt2020/smpte2084), 3840x2160, 9953280 kb/s, 25 tbr, 25 tbn, 25 tbc
  
  [mp4 @ 0x40b0440] Could not find tag for codec rawvideo in stream #0, codec not currently supported in container
  
  Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (copy)
  
      Last message repeated 1 times

  Goal

  • I want to generate matadata normally when encoding a video through hevc_nvenc.

  • I want to create a video through hevc_nvenc and play HDR Video on smart tv with 10bit color depth support.

  ---

  Additional

  • Is it normal for ffmpeg hevc_nvenc not to generate metadata in the resulting video file ? or is it a bug ?

  • Please refer to the image below. (*’알 수 없음’ meaning ’unknown’)

    • if you need more detail file info, check this Gist Link (by ffprobe)
      

  • However, if you encode a file in libx265, the attribute information is entered correctly as shown below.

    • if you need more detail file info, check this Gist Link
      

  However, when using hevc_nvenc, all information is missing.

  • i used option -show_streams -show_programs -show_format -show_data -of json -show_frames -show_log 56 at ffprobe

• Unrecognized option '-enable-libx264'. Error splitting the argument list : Option not found

  9 mars 2020, par DigM

  I’m trying to stream MP4 videos from my server to YouTube and so I installed FFMPEG version. When I then look at the configuration of FFMPEG, I am then presented with the following :

  ffmpeg version 3.3.6 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with gcc 4.9.2 (Debian 4.9.2-10)
  
    configuration: --enable-cross-compile --arch=i686 --target-os=linux --disable-yasm --disable-static --enable-shared --enable-gpl --enable-libmp3lame --enable-libx264 --enable-libsoxr --enable-version3 --enable-nonfree --enable-openssl --disable-decoder=ac3 --disable-decoder=ac3_fixed --disable-decoder=eac3 --disable-decoder=dca --disable-decoder=truehd --disable-encoder=ac3 --disable-encoder=ac3_fixed --disable-encoder=eac3 --disable-encoder=dca --disable-decoder=hevc --disable-decoder=hevc_cuvid --disable-encoder=hevc_nvenc --disable-encoder=nvenc_hevc --extra-ldflags='-L/root/daily_build/64_05/4.4.1/LinkFS/usr/lib -L/root/daily_build/64_05/4.4.1/Model/TS-X72/build/RootFS/usr/local/medialibrary/lib -Wl,--rpath -Wl,/usr/local/medialibrary/lib' --extra-cflags='-I/root/daily_build/64_05/4.4.1/LinkFS/usr/include -I/root/daily_build/64_05/4.4.1/Model/TS-X72/build/RootFS/usr/local/medialibrary/include -D_GNU_SOURCE -DQNAP' --prefix=/root/daily_build/64_05/4.4.1/Model/TS-X72/build/RootFS/usr/local/medialibrary
  
    libavutil      55. 58.100 / 55. 58.100
  
    libavcodec     57. 89.100 / 57. 89.100
  
    libavformat    57. 71.100 / 57. 71.100
  
    libavdevice    57.  6.100 / 57.  6.100
  
    libavfilter     6. 82.100 /  6. 82.100
  
    libswscale      4.  6.100 /  4.  6.100
  
    libswresample   2.  7.100 /  2.  7.100
  
    libpostproc    54.  5.100 / 54.  5.100

  However, when I then try

  ffmpeg ---enable-libx264

  I then get an error saying :

  Unrecognized option '--enable-libx264'.
  
  Error splitting the argument list: Option not found

  Do I need to change the configuaration of FFMPEG somehow or run another configuration option first or is there just something wrong with my call to enable libx264 ?

• How to enable hardware support for H.264 encoding on raspberry Pi 4B

  24 mars 2021, par MSD Paul

  I am trying to enable the hardware support for H264 encoding on raspberry pi 4B model. Compiling FFmpeg source enabling the configurations

  



  sudo ./configure --arch=armel --target-os=linux --enable-gpl --enable-omx --enable-omx-rpi --enable-nonfree


  



  following the link, https://github.com/legotheboss/YouTube-files/wiki/(RPi)-Compile-FFmpeg-with-the-OpenMAX-H.264-GPU-acceleration

  



  but while executing the encoding command after building and installing the ffmpeg with those configuration properly, I am getting the following error

  



  [h264_omx @ 0x156b6e0] Using OMX.broadcom.video_encode
[h264_omx @ 0x156b6e0] OMX error 80001000
[h264_omx @ 0x156b6e0] err 80001018 (-2147479528) on line 561
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
Conversion failed!


  



  command used :

  



  ffmpeg -i /media/pi/pic_1_org.png -c:v h264_omx -c:a copy -b:v 1500k outputfile.mp4


  



  I just want to encode a single 4K image into a .mp4 file using H.264 encoder. 
Please let me know how to resolve this issue ?