Recherche avancée

Médias (2)

Mot : - Tags -/plugins

Autres articles (96)

  • MediaSPIP 0.1 Beta version

    25 avril 2011, par

    MediaSPIP 0.1 beta is the first version of MediaSPIP proclaimed as "usable".
    The zip file provided here only contains the sources of MediaSPIP in its standalone version.
    To get a working installation, you must manually install all-software dependencies on the server.
    If you want to use this archive for an installation in "farm mode", you will also need to proceed to other manual (...)

  • Multilang : améliorer l’interface pour les blocs multilingues

    18 février 2011, par

    Multilang est un plugin supplémentaire qui n’est pas activé par défaut lors de l’initialisation de MediaSPIP.
    Après son activation, une préconfiguration est mise en place automatiquement par MediaSPIP init permettant à la nouvelle fonctionnalité d’être automatiquement opérationnelle. Il n’est donc pas obligatoire de passer par une étape de configuration pour cela.

  • Participer à sa traduction

    10 avril 2011

    Vous pouvez nous aider à améliorer les locutions utilisées dans le logiciel ou à traduire celui-ci dans n’importe qu’elle nouvelle langue permettant sa diffusion à de nouvelles communautés linguistiques.
    Pour ce faire, on utilise l’interface de traduction de SPIP où l’ensemble des modules de langue de MediaSPIP sont à disposition. ll vous suffit de vous inscrire sur la liste de discussion des traducteurs pour demander plus d’informations.
    Actuellement MediaSPIP n’est disponible qu’en français et (...)

Sur d’autres sites (9690)

  • .MKV to .MP4 choosing the audio and subtitles ?

    11 décembre 2016, par Leo Letto

    The following stream belongs to a .mkv file with dual audio ;

    Stream #0:0: Video: h264 (High), yuv420p(progressive), 1280x960 [SAR 1:1 DAR 4:3], 29.97 fps, 29.97 tbr, 1k tbn, 59.94 tbc (default)
    
Stream #0:1(eng): Audio: mp3, 48000 Hz, stereo, s16p, 256 kb/s (default)
    
Stream #0:2(por): Audio: ac3, 48000 Hz, stereo, fltp, 192 kb/s
    
Stream #0:3(eng): Subtitle: ass (default)

    Which ffmpeg command should I use to create an output with the language in Portuguese, already with the English subtitles ?

    I found some commands that can extract the language-based caption that I specify, but I didn’t find anything related to selecting the audio type.

    This is the entire output from ffmpeg :

    configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-lzma --enable-decklink --enable-zlib
    
  libavutil      55. 41.101 / 55. 41.101
    
  libavcodec     57. 66.108 / 57. 66.108
    
  libavformat    57. 58.101 / 57. 58.101
    
  libavdevice    57.  2.100 / 57.  2.100
    
  libavfilter     6. 67.100 /  6. 67.100
    
  libswscale      4.  3.101 /  4.  3.101
    
  libswresample   2.  4.100 /  2.  4.100
    
  libpostproc    54.  2.100 / 54.  2.100
    
Input #0, matroska,webm, from 'mydualmkv.mkv':
    
  Metadata:
    
    title           : Avidemux
    
    encoder         : libebml v1.2.3 + libmatroska v1.3.0
    
    creation_time   : 2015-08-04T15:25:49.000000Z
    
  Duration: 00:23:37.44, start: 0.000000, bitrate: 1908 kb/s
    
    Stream #0:0: Video: h264 (High), yuv420p(progressive), 1280x960 [SAR 1:1 DAR 4:3], 29.97 fps, 29.97 tbr, 1k tbn, 59.94 tbc (default)
    
    Stream #0:1(eng): Audio: mp3, 48000 Hz, stereo, s16p, 256 kb/s (default)
    
    Stream #0:2(pot): Audio: ac3, 48000 Hz, stereo, fltp, 192 kb/s
    
    Stream #0:3(eng): Subtitle: ass (default)
    
[mp4 @ 0000000000c36700] track 1: codec frame size is not set
    
Output #0, mp4, to 'path-to-output.mp4':
    
  Metadata:
    
    title           : Avidemux
    
    encoder         : Lavf57.58.101
    
    Stream #0:0: Video: h264 (High) ([33][0][0][0] / 0x0021), yuv420p(progressive), 1280x960 [SAR 1:1 DAR 4:3], q=2-31, 29.97 fps, 29.97 tbr, 16k tbn, 1k tbc (default)
    
    Stream #0:1(por): Audio: ac3 ([165][0][0][0] / 0x00A5), 48000 Hz, stereo, fltp, 192 kb/s
    
    Stream #0:2(eng): Subtitle: mov_text ([8][0][0][0] / 0x0008) (default)
    
    Metadata:
    
      encoder         : Lavc57.66.108 mov_text
    
Stream mapping:
    
  Stream #0:0 -> #0:0 (copy)
    
  Stream #0:2 -> #0:1 (copy)
    
  Stream #0:3 -> #0:2 (ass (ssa) -> mov_text (native))
    
Press [q] to stop, [?] for help
    
frame= 5451 fps=0.0 q=-1.0 size=   39273kB time=00:03:01.89 bitrate=1768.7kbits/s speed= 363x    
    
frame=11708 fps=11695 q=-1.0 size=   79743kB time=00:06:30.62 bitrate=1672.3kbits/s speed= 390x    
    
frame=17902 fps=11926 q=-1.0 size=  122134kB time=00:09:57.60 bitrate=1674.2kbits/s speed= 398x    
    
frame=24717 fps=12352 q=-1.0 size=  166885kB time=00:13:44.83 bitrate=1657.4kbits/s speed= 412x    
    
frame=31995 fps=12792 q=-1.0 size=  211010kB time=00:17:47.74 bitrate=1618.9kbits/s speed= 427x    
    
frame=38979 fps=12988 q=-1.0 size=  260758kB time=00:21:40.64 bitrate=1642.4kbits/s speed= 433x    
    
frame=42478 fps=13076 q=-1.0 Lsize=  286844kB time=00:23:37.31 bitrate=1657.9kbits/s speed= 436x    
    
video:252490kB audio:33218kB subtitle:11kB other streams:0kB global headers:0kB muxing overhead: 0.393387%

  • How to Compile FFmpeg with x264 and libfdk-aac for Android

    12 novembre 2016, par Codeveloper

    Everyone.

    Please understand that i use the wrong english.

    I want to make encoding application using FFmpeg.

    I was successfully building NDK with FFmpeg.

    However, to encode H.264 video made had failed( Codec not found.. ).

    I was learned that libx264 is need encode H.264 and libfdk-aac is need encode AAC.

    so I tried to build the libx264 and libfdk-aac, But does not easily cross-compile.

    Please tell me what I did wrong.

    My Development Environment

    OS : ubuntu 13.10 64bit

    NDK : android-ndk-r9

    FFmpeg : ffmpeg-2.0.2

    x264 build : build_x264_android.sh

    NDK=$ANDROID_NDK_HOME
    

    
TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64
    
PLATFORM=$NDK/platforms/android-9/arch-arm
    
CPU=arm
    
PREFIX=$NDK/sources/ffmpeg-2.0.2/android/$CPU
    

    
./configure --prefix=$PREFIX \
    
    --enable-shared \
    
    --enable-pic \
    
    --disable-asm \
    
    --disable-cli \
    
    --host=arm-linux \
    
    --cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi- \
    
    --sysroot=$PLATFORM
    

    
make
    
make install
    
ldconfig

    fdk-aac build : build_aac_android.sh

    NDK=$ANDROID_NDK_HOME
    
CROSS_PREFIX=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-
    
PLATFORM=$NDK/platforms/android-9/arch-arm
    
CPU=arm
    
PREFIX=$NDK/sources/ffmpeg-2.0.2/android/$CPU
    
OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=armv7-a -mthumb -D__thumb__"
    

    
./configure --prefix=$PREFIX \
    
    --with-sysroot=$PLATFORM \
    
    --host=arm-linux \
    
    --enable-shared \
    
    --with-pic=no \
    
    CC="${CROSS_PREFIX}gcc --sysroot=$PLATFORM" \
    
    CXX="${CROSS_PREFIX}g++ --sysroot=$PLATFORM" \
    
    RANLIB="${CROSS_PREFIX}ranlib" \
    
    AR="${CROSS_PREFIX}ar" \
    
    STRIP="${CROSS_PREFIX}strip" \
    
    NM="${CROSS_PREFIX}nm" \
    
    CFLAGS="-O3 $OPTIMIZE_CFLAGS --sysroot=$PLATFORM" \
    
    CXXFLAGS="-O3 $OPTIMIZE_CFLAGS --sysroot=$PLATFORM"
    

    
make
    
make install

    When I run ’build_aac_android.sh’, shown error.

    log in config.log

    configure:2907: checking for arm-linux-gcc
    
configure:2934: result: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm
    
configure:3203: checking for C compiler version
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm --version >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -v >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -V >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -qversion >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3243: checking whether the C compiler works
    
configure:3265: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -O3 -mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=armv7-a -mthumb -D__thumb__ --sysroot=/platforms/android-9/arch-arm   conftest.c  >&5
    
./configure: line 3267: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    

    
configure:3312: error: in `/home/nel/android-ndk-r9/sources/ffmpeg-2.0.2/libfdk-aac':
    
    configure:3314: error: C compiler cannot create executables
    
    See `config.log' for more details

    I cannot understand that error !! I was confirmed that arm-linux-androideabi-gcc is found in the directory..

    I want to borrow you wisdom. Please tell me how to ’ffmpeg+x264+fdk-aac’ build for android.

    Thanks.. :-)

  • How to Compile FFmpeg with x264 and libfdk-aac for Android

    12 novembre 2016, par Codeveloper

    Everyone.

    Please understand that i use the wrong english.

    I want to make encoding application using FFmpeg.

    I was successfully building NDK with FFmpeg.

    However, to encode H.264 video made had failed( Codec not found.. ).

    I was learned that libx264 is need encode H.264 and libfdk-aac is need encode AAC.

    so I tried to build the libx264 and libfdk-aac, But does not easily cross-compile.

    Please tell me what I did wrong.

    My Development Environment

    OS : ubuntu 13.10 64bit

    NDK : android-ndk-r9

    FFmpeg : ffmpeg-2.0.2

    x264 build : build_x264_android.sh

    NDK=$ANDROID_NDK_HOME
    

    
TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64
    
PLATFORM=$NDK/platforms/android-9/arch-arm
    
CPU=arm
    
PREFIX=$NDK/sources/ffmpeg-2.0.2/android/$CPU
    

    
./configure --prefix=$PREFIX \
    
    --enable-shared \
    
    --enable-pic \
    
    --disable-asm \
    
    --disable-cli \
    
    --host=arm-linux \
    
    --cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi- \
    
    --sysroot=$PLATFORM
    

    
make
    
make install
    
ldconfig

    fdk-aac build : build_aac_android.sh

    NDK=$ANDROID_NDK_HOME
    
CROSS_PREFIX=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-
    
PLATFORM=$NDK/platforms/android-9/arch-arm
    
CPU=arm
    
PREFIX=$NDK/sources/ffmpeg-2.0.2/android/$CPU
    
OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=armv7-a -mthumb -D__thumb__"
    

    
./configure --prefix=$PREFIX \
    
    --with-sysroot=$PLATFORM \
    
    --host=arm-linux \
    
    --enable-shared \
    
    --with-pic=no \
    
    CC="${CROSS_PREFIX}gcc --sysroot=$PLATFORM" \
    
    CXX="${CROSS_PREFIX}g++ --sysroot=$PLATFORM" \
    
    RANLIB="${CROSS_PREFIX}ranlib" \
    
    AR="${CROSS_PREFIX}ar" \
    
    STRIP="${CROSS_PREFIX}strip" \
    
    NM="${CROSS_PREFIX}nm" \
    
    CFLAGS="-O3 $OPTIMIZE_CFLAGS --sysroot=$PLATFORM" \
    
    CXXFLAGS="-O3 $OPTIMIZE_CFLAGS --sysroot=$PLATFORM"
    

    
make
    
make install

    When I run ’build_aac_android.sh’, shown error.

    log in config.log

    configure:2907: checking for arm-linux-gcc
    
configure:2934: result: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm
    
configure:3203: checking for C compiler version
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm --version >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -v >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -V >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3212: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -qversion >&5
    
./configure: line 3214: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    
configure:3223: $? = 127
    
configure:3243: checking whether the C compiler works
    
configure:3265: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc --sysroot=/platforms/android-9/arch-arm -O3 -mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=armv7-a -mthumb -D__thumb__ --sysroot=/platforms/android-9/arch-arm   conftest.c  >&5
    
./configure: line 3267: /toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc: No such file or directory
    

    
configure:3312: error: in `/home/nel/android-ndk-r9/sources/ffmpeg-2.0.2/libfdk-aac':
    
    configure:3314: error: C compiler cannot create executables
    
    See `config.log' for more details

    I cannot understand that error !! I was confirmed that arm-linux-androideabi-gcc is found in the directory..

    I want to borrow you wisdom. Please tell me how to ’ffmpeg+x264+fdk-aac’ build for android.

    Thanks.. :-)

Navigation