Recherche avancée

Sur d’autres sites (7805)

• Intel QuickSync error : Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height

  30 novembre 2018, par Arie Syamsudin

  I want to make IPTV with a topology like this :

  Restream / source -----> IPTV server -----> User

  The problem at the moment is the question of bandwidth that is still large.

  Finally I announced by IPTV software providers to transcode with Intel QuickSync video and FFmpeg.

  I followed the steps given by the software provider at the following link :
  http://www.ezhometech.com/document/intel_ffmpeg.txt

  Which comes from the link below :
  https://www.intel.com/content/dam/www/public/us/en/documents/white-paper...

  I installed IPTV software on a laptop with an Intel processor, chipset and VGA.

  [root@iptv ffmpeg-4.1]# **lspci**
  
  00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
  
  00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
  
  00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
  
  00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
  
  00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
  
  00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
  
  00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
  
  00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
  
  00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
  
  00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller (rev 05)
  
  00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
  
  01:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1)
  
  02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
  
  
  
  [root@iptv ffmpeg-4.1]# **lspci -nn -s 0:02.0**
  
  00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)

  but when I do a transcoding test, an error always appears :
  Error initializing output stream 0:0 — Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height.

  Error details :
  https://paste.fedoraproject.org/paste/vp9XIzbeOuyXRuLBlLfSng

  FFmpeg log :

  ./ffmpeg  -hwaccel qsv -i http://premium-play.org:8000/domm0H56Cj/q3ODLP6C16/2826 -vcodec h264_qsv -acodec copy -b:v 1200K -f mpegts udp://127.0.0.1:9011?pkt_size=1316
  
  ffmpeg version 3.2.12 Copyright (c) 2000-2018 the FFmpeg developers
  
    built with gcc 4.8.5 (GCC) 20150623 (Red Hat 4.8.5-28)
  
    configuration: --enable-libmfx --enable-nonfree
  
    libavutil      55. 34.101 / 55. 34.101
  
    libavcodec     57. 64.101 / 57. 64.101
  
    libavformat    57. 56.101 / 57. 56.101
  
    libavdevice    57.  1.100 / 57.  1.100
  
    libavfilter     6. 65.100 /  6. 65.100
  
    libswscale      4.  2.100 /  4.  2.100
  
    libswresample   2.  3.100 /  2.  3.100
  
  Input #0, mpegts, from 'http://premium-play.org:8000/domm0H56Cj/q3ODLP6C16/2826':
  
    Duration: N/A, start: 30200.274878, bitrate: N/A
  
    Program 1
  
      Metadata:
  
        service_name    : Service01
  
        service_provider: FFmpeg
  
      Stream #0:0[0x100]: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p(progressive), 1920x1080 [SAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 100 tbc
  
      Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 125 kb/s
  
  libva info: VA-API version 1.0.0
  
  libva info: va_getDriverName() returns 0
  
  libva info: User requested driver 'iHD'
  
  libva info: Trying to open /opt/intel/mediasdk/lib64/iHD_drv_video.so
  
  libva info: Found init function __vaDriverInit_1_0
  
  libva info: va_openDriver() returns 0
  
  [h264_qsv @ 0x2a89500] Selected ratecontrol mode is not supported by the QSV runtime. Choose a different mode.
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (h264 (native) -> h264 (h264_qsv))
  
    Stream #0:1 -> #0:1 (copy)
  
  Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height

• FFmpeg : Audio Filter taking too long

  29 novembre 2018, par Prashant_Sarin

  I am using the code below to apply a volume filter in ffmpeg, but it is taking too long. A 5-minute audiofile filter takes 3 minutes. Can someone give advice on how I can speed it up.

  My command is :

  var command = "-i $audioPath -af volume=enable='between(t,5,10)+between(t,15,20)':volume=0.25:eval=frame $outputFile"

  Logs are :

  2018-11-29 16:58:22.487 23387-23387/com.example.prashants.ffmpegtest D/com.example.prashants.ffmpegtest.service.AudioOverlayService: onProgress -    ---AudioVolume---- size=    1537kB time=00:01:40.41 bitrate= 125.4kbits/s speed=1.13x    
  
  2018-11-29 16:58:22.489 23387-23387/com.example.prashants.ffmpegtest D/com.example.prashants.ffmpegtest.service.AudioOverlayService: onProgress ----AudioVolume---- video:0kB audio:1518kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.260607%
  
  2018-11-29 16:58:22.490 23387-23387/com.example.prashants.ffmpegtest D/com.example.prashants.ffmpegtest.service.AudioOverlayService: onProgress ----AudioVolume---- bench: utime=86.707s
  
  2018-11-29 16:58:22.491 23387-23387/com.example.prashants.ffmpegtest D/com.example.prashants.ffmpegtest.service.AudioOverlayService: onProgress ----AudioVolume---- bench: maxrss=65792kB
  
  2018-11-29 16:58:22.492 23387-23387/com.example.prashants.ffmpegtest D/com.example.prashants.ffmpegtest.service.AudioOverlayService: onProgress ----AudioVolume---- [aac @ 0xb1ce4400] Qavg: 17415.965 
  
  2018-11-29 16:58:22.493 23387-23387/com.example.prashants.ffmpegtest D/com.example.prashants.ffmpegtest.service.AudioOverlayService: AudioVolume success--------- -benchmark -threads 4 -i /storage/emulated/0/FFmpegTest/looped.m4a -af volume=enable='between(t,5,10)+between(t,15,20)':volume=0.25:eval=frame 
  
  /storage/emulated/0/FFmpegTest/filtered_audio.m4a

• Create 4K video with Mjpeg codec in ffmpeg

  25 novembre 2018, par Sulli

  I’m trying to produce a simple 6 seconds video clip by zooming on an image (.mov output, mjpeg codec). I can get this command to work when I set the output to be 1920x1080 :

  ffmpeg -y -r 25 -nostdin -loop 1 -i input.jpg -vf "zoompan=z='min(zoom+0.0015,1.5)':d=700:x='iw/2-(iw/zoom/2)':y='ih/2-(ih/zoom/2)'" -c:v mjpeg -qscale:v 1 -t 6 -s "1920x1080" "test/output.mov"

  but it’s not working anymore when I set the output to be 4K (3840x2160) : the command hangs, is killed or produces a corrupted output.

  My input.jpg resolution is 4240x2832.

  What am I missing ?

  Edit : here is the full log :

  ffmpeg version 2.8.15-0ubuntu0.16.04.1 Copyright (c) 2000-2018 the FFmpeg developers
  
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.10) 20160609
  
    configuration: --prefix=/usr --extra-version=0ubuntu0.16.04.1 --build-suffix=-ffmpeg --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --cc=cc --cxx=g++ --enable-gpl --enable-shared --disable-stripping --disable-decoder=libopenjpeg --disable-decoder=libschroedinger --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxvid --enable-libzvbi --enable-openal --enable-opengl --enable-x11grab --enable-libdc1394 --enable-libiec61883 --enable-libzmq --enable-frei0r --enable-libx264 --enable-libopencv
  
    libavutil      54. 31.100 / 54. 31.100
  
    libavcodec     56. 60.100 / 56. 60.100
  
    libavformat    56. 40.101 / 56. 40.101
  
    libavdevice    56.  4.100 / 56.  4.100
  
    libavfilter     5. 40.101 /  5. 40.101
  
    libavresample   2.  1.  0 /  2.  1.  0
  
    libswscale      3.  1.101 /  3.  1.101
  
    libswresample   1.  2.101 /  1.  2.101
  
    libpostproc    53.  3.100 / 53.  3.100
  
  [mjpeg @ 0x151da00] Changeing bps to 8
  
  Input #0, image2, from 'input.jpg':
  
    Duration: 00:00:00.04, start: 0.000000, bitrate: 760992 kb/s
  
      Stream #0:0: Video: mjpeg, yuvj444p(pc, bt470bg/unknown/unknown), 4240x2832, 25 tbr, 25 tbn, 25 tbc
  
  [swscaler @ 0x153cf80] deprecated pixel format used, make sure you did set range correctly
  
  Output #0, mov, to 'test/output.mov':
  
    Metadata:
  
      encoder         : Lavf56.40.101
  
      Stream #0:0: Video: mjpeg (jpeg / 0x6765706A), yuvj444p(pc), 3840x2160, q=2-31, 200 kb/s, 25 fps, 12800 tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc56.60.100 mjpeg
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> mjpeg (native))
  
  [swscaler @ 0x43c82c0] deprecated pixel format used, make sure you did set range correctly
  
  [swscaler @ 0x43c82c0] Warning: data is not aligned! This can lead to a speedloss
  
  [swscaler @ 0x43c7dc0] deprecated pixel format used, make sure you did set range correctly
  
  [swscaler @ 0x444d0a0] deprecated pixel format used, make sure you did set range correctly
  
  [swscaler @ 0x444cdc0] deprecated pixel format used, make sure you did set range correctly
  
      Last message repeated 5 times
  
  [swscaler @ 0x4439e20] deprecated pixel format used, make sure you did set range correctly
  
      Last message repeated 6 times
  
  [swscaler @ 0x43df9c0] deprecated pixel format used, make sure you did set range correctly
  
      Last message repeated 83 times
  
  [output stream 0:0 @ 0x15240c0] 100 buffers queued in output stream 0:0, something may be wrong.
  
  [swscaler @ 0x43df9c0] deprecated pixel format used, make sure you did set range correctly
  
  creer_videos.sh: line 10:    18 Killed                  ffmpeg -y -r 25 -nostdin -loop 1 -i input.jpg -vf "zoompan=z='min(zoom+0.0015,1.5)':d=700:x='iw/2-(iw/zoom/2)':y='ih/2-(ih/zoom/2)'" -c:v mjpeg -qscale:v 1 -t 6 -s "3840x2160" "test/output.mov"