Recherche avancée

Sur d’autres sites (8396)

• FFMPEG UDP MPEG2TS to Cable TV Channel - Video & Audio Problems

  30 janvier 2019, par user2884023

  Channel Feed Distored Picture

  $ ffmpeg
  
  -re
  
  -i playlist1.txt
  
  -b:v 15000k 
  
  -bufsize 15000k
  
  -maxrate 16000k
  
  -f mpegts "udp://XXX.XXX.X.XXX:XXXX"

  I have mpeg2.ts files encoded to CBR15mbs.
  The files are set to different frame rates. Although initial testing was just playing 1 file.
  They are currently 1080p I think without declaring the frame rate, they are defaulting to 30fps.
  From the server locally via Port2 (that we are using to send our feed), everything plays fine via FFPLAY.
  The final out put local CATV is pixelated and distorted, the video is missing data playing slowly and the audio is choppy / distorted.
  I even tried just a 192kps .mp2 and it played distorted on the CATV channel.
  They set me up with a cable modem. 2 ports, 1 WAN, 1 a dedicated port to feed their head end and I have a fiber synchronous 20/20 connection.

  I am guessing its a packet issue, perhaps on our end with our FFMPEG setup ? And maybe FFPLAY isn’t as sensitive to the actual distro process.

  Perhaps the secret lies here, but there isn’t much info about them, even scouring the net.

  ?pkt_size=188&buffer_size=65535

  For example what is this one :

  broadcast=1|0

  Explicitly allow or disallow UDP broadcasting.

  I apologize if data is missing, please ask questions. I didn’t want to write a novel.

  I am hoping some can provide the correct code so my signal is corrected. I assume the problem is on our end, and not the CATV end. At least I can try some solutions on our end first. I can make real-time FFMPEG changes to the server, and see the channel results instantly so that helps.

  Finally, the fact it wouldn’t even play a .mp2 audio file cleanly on the channel, does make me wonder, is there a problem on their end, or is it a config on our end, and we just need the correct answer ?

• My SBC Collection

  31 décembre 2023, par Multimedia Mike — General

  Like many computer nerds in the last decade, I have accumulated more than a few single-board computers, or “SBCs”, which are small computers based around a system-on-a-chip (SoC) that nearly always features an ARM CPU at its core. Surprisingly few of these units are Raspberry Pi units, though that brand has come to exemplify and dominate the product category.

  Also, as is the case for many computer nerds, most of these SBCs lay fallow for years at a time. Equipped with an inexpensive lightbox that I procured in the last year, I decided I could at least create glamour shots of various units and catalog them in a blog post.

  While Raspberry Pi still enjoys the most mindshare far and away, and while I do have a few Raspberry Pi units in my inventory, I have always been a bigger fan of the ODROID brand, which works with convenient importers around the world (in the USA, I can vouch for Ameridroid, to whom I’ve forked over a fair amount of cash for these computing toys).

  As mentioned, Raspberry Pi undisputedly has the most mindshare of all these SBC brands and I often wonder why… and then I immediately remind myself that it has the biggest ecosystem, and has a variety of turnkey projects and applications (such as Pi-hole and PiVPN) that promise a lower barrier to entry — as well as a slightly lower price point — than some of these other options. ODROID had a decent ecosystem for awhile, especially considering the monthly ODROID Magazine, though that ceased publication in July 2020. The Raspberry Pi and its variants were famously difficult to come by due to the global chip shortage from 2021-2023. Meanwhile, I had no trouble procuring these boards during the same timeframe.

  So let’s delve into the collection…
  

  Cubieboard
  The Raspberry Pi came out in 2012 and by 2013 I was somewhat coveting one to hack on. Finally ! An accessible ARM platform to play with. I had heard of the BeagleBoard for years but never tried to get my hands on one. I was thinking about taking the plunge on a new Raspberry Pi, but a colleague told me I should skip that and go with this new hotness called the Cubieboard, based on an Allwinner SoC. The big value-add that this board had vs. a Raspberry Pi was that it had a SATA adapter. Although now that it has been a decade, it only now occurs to me to quander whether it was true SATA or a USB-to-SATA bridge. Looking it up now, I’m led to believe that the SoC supported the functionality natively.

  Anyway, I did get it up and running but never did much with it, thus setting the tone for future SBC endeavors. No photos because I gave it to another tech enthusiast years ago, whose SBC collection dwarfs my own.

  ODROID-XU4
  I can’t recall exactly when or how I first encountered the ODROID brand. I probably read about it on some enthusiast page or another circa 2014 and decided to try one out. I eventually acquired a total of 3 of these ODROID-XU4 units, each with a different case, 1 with a fan and 2 passively-cooled :

  

  Collection of ODROID-XU4 SBCs

  This is based on the Samsung Exynos 5422 SoC, the same series as was used in their Note 3 phone released in 2013. It has been a fun chip to play with. The XU4 was also my first introduction to the eMMC storage solution that is commonly supported on the ODROID SBCs (alongside micro-SD). eMMC offers many benefits over SD in terms of read/write speed as well as well as longevity/write cycles. That’s getting less relevant these days, however, as more and more SBCs are being released with direct NVMe SSD support.

  I had initially wanted to make a retro-gaming device built on this platform (see the handheld section later for more meditations on that). In support of this common hobbyist goal, there is this nifty case XU4 case which apes the aesthetic of the Nintendo N64 :

  

  ODROID-XU4 N64-style case

  It even has a cool programmable LCD screen. Maybe one day I’ll find a use for it.

  For awhile, one of these XU4 units (likely the noisy, fan-cooled one) was contributing results to the FFmpeg FATE system.

  While it features gigabit ethernet and a USB3 port, I once tried to see if I could get 2 Gbps throughput with the unit using a USB3-gigabit dongle. I had curious results in that the total amount of traffic throughput could never exceed 1 Gbps across both interfaces. I.e., if 1 interface was dealing with 1 Gbps and the other interface tried to run at 1 Gbps, they would both only run at 500 Mbps. That remains a mystery to me since I don’t see that limitation with Intel chips.

  Still, the XU4 has been useful for a variety of projects and prototyping over the years.

  ODROID-HC2 NAS
  I find that a lot of my fellow nerds massively overengineer their homelab NAS setups. I’ll explore this in a future post. For my part, people tend to find my homelab NAS solution slightly underengineered. This is the ODROID-HC2 (the “HC” stands for “Home Cloud”) :

  

  ODROID-HC2 NAS

  It has the same guts as the ODROID-XU4 except no video output and the USB3 function is leveraged for a SATA bridge. This allows you to plug a SATA hard drive directly into the unit :

  

  ODROID-HC2 NAS uncovered

  Believe it or not, this has been my home NAS solution for something like 6 or 7 years now– I don’t clearly remember when I purchased it and put it into service.

  But isn’t this sort of irresponsible ? What about a failure of the main drive ? That’s why I have an external drive connected for backing up the most important data via rsync :

  

  ODROID-HC2 NAS backup enclosure

  The power consumption can’t be beat– Profiling for a few weeks of average usage worked out to 4.5 kWh for the ODROID-HC2… per month.

  ODROID-C2
  I was on a kick of ordering more SBCs at one point. This is the ODROID-C2, equipped with a 64-bit Amlogic SoC :

  

  ODROID-C2

  I had this on the FATE farm for awhile, performing 64-bit ARM builds (vs. the XU4’s 32-bit builds). As memory serves, it was unreliable and would occasionally freeze up.

  Here is a view of the eMMC storage through the bottom of the translucent case :

  

  Bottom of ODROID-C2 with view of eMMC storage

  ODROID-N2+
  Out of all my ODROID SBCs, this is the unit that I long to “get back to” the most– the ODROID-N2+ :

  

  ODROID-N2+

  Very capable unit that makes a great little desktop. I have some projects I want to develop using it so that it will force me to have a focused development environment.

  Raspberry Pi
  Eventually, I did break down and get a Raspberry Pi. I had a specific purpose in mind and, much to my surprise, I have stuck to it :

  

  Original Raspberry Pi

  I was using one of the ODROID-XU4 units as a VPN gateway. Eventually, I wanted to convert the XU4 to something else and I decided to run the VPN gateway as an appliance on the simplest device I could. So I procured this complete hand-me-down unit from eBay and went to work. This was also the first time I discovered the DietPi distribution and this box has been in service running Wireguard via PiVPN for many years.

  I also have a Raspberry Pi 3B+ kicking around somewhere. I used it as a Steam Link device for awhile.

  SOPINE + Baseboard
  Also procured when I was on this “let’s buy random SBCs” kick. The Pine64 SOPINE is actually a compute module that comes in the form factor of a memory module.

  

  Pine64 SOPINE Compute Module

  Back to using Allwinner SoCs. In order to make this thing useful, you need to place it in something. It’s possible to get a mini-ITX form factor board that can accommodate 7 of these modules. Before going to that extreme, there is this much simpler baseboard which can also use eMMC for storage.

  

  Baseboard with SOPINE, eMMC, and heat sinks

  I really need to find an appropriate case for this one as it currently performs its duty while sitting on an anti-static bag.

  NanoPi NEO3
  I enjoy running the DietPi distribution on many of these SBCs (as it’s developed not just for Raspberry Pi). I have also found their website to be a useful resource for discovering new SBCs. That’s how I found the NanoPi series and zeroed in on this NEO3 unit, sporting a Rockchip SoC, and photographed here with some American currency in order to illustrate its relative size :

  

  NanoPi NEO3

  I often forget about this computer because it’s off in another room, just quietly performing its assigned duty.

  MangoPi MQ-Pro
  So far, I’ve heard of these fruits prepending the Greek letter pi for naming small computing products :

  • Raspberry – the O.G.
  • Banana – seems to be popular for hobbyist router/switches
  • Orange
  • Atomic
  • Nano
  • Mango

  Okay, so the AtomicPi and NanoPi names don’t really make sense considering the fruit convention.

  Anyway, the newest entry is the MangoPi. These showed up on Ameridroid a few months ago. There are 2 variants : the MQ-Pro and the MQ-Quad. I picked one and rolled with it.

  

  MangoPi MQ-Pro pieces arrive

  When it arrived, I unpacked it, assembled the pieces, downloaded a distro, tossed that on a micro-SD card, connected a monitor and keyboard to it via its USB-C port, got the distro up and running, configured the wireless networking with a static IP address and installed sshd, and it was ready to go as a headless server for an edge application.

  

  MangoPi MQ-Pro components, ready for assembly

  The unit came with no instructions that I can recall. After I got it set up, I remember thinking, “What is wrong with me ? Why is it that I just know how to do all of this without any documentation ?”

  

  MangoPi MQ-Pro in first test

  Only after I got it up and running and poked around a bit did I realize that this SBC doesn’t have an ARM SoC– it’s a RISC-V SoC. It uses the Allwinner D1, so it looks like I came full circle back to Allwinner.

  

  MangoPi MQ-Pro with more US coinage for scale

  So I now have my first piece of RISC-V hobbyist kit, although I learned recently from Kostya that it’s not that great for multimedia.

  Handheld Gaming Units
  The folks at Hardkernel have also produced a series of handheld retro-gaming devices called ODROID-GO. The first one resembled the original Nintendo Game Boy, came as a kit to be assembled, and emulated 5 classic consoles. It also had some hackability to it. Quite a cool little device, and inexpensive too. I have since passed it along to another gaming enthusiast.

  Later came the ODROID-GO Advance, also a kit, but emulating more devices. I was extremely eager to get my hands on this since it could emulate SNES in addition to NES. It also features a headphone jack, unlike the earlier model. True to form, after I received mine, it took me about 13 months before I got around to assembling it. After that, the biggest challenge I had was trying to find an appropriate case for it.

  

  ODROID-GO Advance with case and headphones

  Even though it may try to copy the general aesthetic and form factor of the Game Boy Advance, cases for the GBA don’t fit this correctly.

  Further, Hardkernel have also released the ODROID-GO Super and Ultra models that do more and more. The Advance, Super, and Ultra models have powerful SoCs and feature much more hackability than the first ODROID-GO model.

  I know that the guts of the Advance have been used in other products as well. The same is likely true for the Super and Ultra.

  Ultimately, the ODROID-GO Advance was just another project I assembled and then set aside since I like the idea of playing old games much more than actually doing it. Plus, the fact has finally crystalized in my mind over the past few years that I have never enjoyed handheld gaming and likely will never enjoy handheld gaming, even after I started wearing glasses. Not that I’m averse to old Game Boy / Color / Advance games, but if I’m going to play them, I’d rather emulate them on a large display.

  The Future
  In some of my weaker moments, I consider ordering up certain Banana Pi products (like the Banana Pi BPI-R2) with a case and doing my own router tricks using some open source router/firewall solution. And then I remind myself that my existing prosumer-type home router is doing just fine. But maybe one day…

  The post My SBC Collection first appeared on Breaking Eggs And Making Omelettes.

• FFMPEG Output File is Empty Nothing was Encoded (for a Picture) ?

  4 mars 2023, par Sarah Szabo

  I have a strange issue effecting one of my programs that does bulk media conversions using ffmpeg from the command line, however this effects me using it directly from the shell as well :

  


  ffmpeg -i INPUT.mkv -ss 0:30 -y -qscale:v 2 -frames:v 1 -f image2 -huffman optimal "OUTPUT.png"
fails every run with the error message :
Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)

  


  This only happens with very specific videos, and seemingly no other videos. File type is usually .webm. These files have been downloaded properly (usually from yt-dlp), and I have tried re-downloading them just to verify their integrity.

  


  One such file from a colleague was : https://www.dropbox.com/s/xkucr2z5ra1p2oh/Triggerheart%20Execlica%20OST%20%28Arrange%29%20-%20Crueltear%20Ending.mkv?dl=0

  


  Is there a subtle issue with the command string ?

  


  Notes :

  


  removing -huffman optimal had no effect

  


  moving -ss to before -i had no effect

  


  removing -f image2 had no effect

  


  Full Log :

  


  sarah@MidnightStarSign:~/Music/Playlists/Indexing/Indexing Temp$ ffmpeg -i Triggerheart\ Execlica\ OST\ \(Arrange\)\ -\ Crueltear\ Ending.mkv -ss 0:30 -y -qscale:v 2 -frames:v 1 -f image2 -huffman optimal "TEST.png"
ffmpeg version n5.1.2 Copyright (c) 2000-2022 the FFmpeg developers
  built with gcc 12.2.0 (GCC)
  configuration: --prefix=/usr --disable-debug --disable-static --disable-stripping --enable-amf --enable-avisynth --enable-cuda-llvm --enable-lto --enable-fontconfig --enable-gmp --enable-gnutls --enable-gpl --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libdav1d --enable-libdrm --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libiec61883 --enable-libjack --enable-libmfx --enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librav1e --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxml2 --enable-libxvid --enable-libzimg --enable-nvdec --enable-nvenc --enable-opencl --enable-opengl --enable-shared --enable-version3 --enable-vulkan
  libavutil      57. 28.100 / 57. 28.100
  libavcodec     59. 37.100 / 59. 37.100
  libavformat    59. 27.100 / 59. 27.100
  libavdevice    59.  7.100 / 59.  7.100
  libavfilter     8. 44.100 /  8. 44.100
  libswscale      6.  7.100 /  6.  7.100
  libswresample   4.  7.100 /  4.  7.100
  libpostproc    56.  6.100 / 56.  6.100
[matroska,webm @ 0x55927f484740] Could not find codec parameters for stream 2 (Attachment: none): unknown codec
Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options
Input #0, matroska,webm, from 'Triggerheart Execlica OST (Arrange) - Crueltear Ending.mkv':
  Metadata:
    title           : TriggerHeart Exelica PS2 & 360 Arrange ー 16 - Crueltear Ending
    PURL            : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    COMMENT         : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    ARTIST          : VinnyVynce
    DATE            : 20170905
    ENCODER         : Lavf59.27.100
  Duration: 00:00:30.00, start: -0.007000, bitrate: 430 kb/s
  Stream #0:0(eng): Video: vp9 (Profile 0), yuv420p(tv, bt709), 720x720, SAR 1:1 DAR 1:1, 25 fps, 25 tbr, 1k tbn (default)
    Metadata:
      DURATION        : 00:00:29.934000000
  Stream #0:1(eng): Audio: opus, 48000 Hz, stereo, fltp (default)
    Metadata:
      DURATION        : 00:00:30.001000000
  Stream #0:2: Attachment: none
    Metadata:
      filename        : cover.webp
      mimetype        : image/webp
Codec AVOption huffman (Huffman table strategy) specified for output file #0 (TEST.png) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
Stream mapping:
  Stream #0:0 -> #0:0 (vp9 (native) -> png (native))
Press [q] to stop, [?] for help
Output #0, image2, to 'TEST.png':
  Metadata:
    title           : TriggerHeart Exelica PS2 & 360 Arrange ー 16 - Crueltear Ending
    PURL            : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    COMMENT         : https://www.youtube.com/watch?v=zJ0bEa_8xEg
    ARTIST          : VinnyVynce
    DATE            : 20170905
    encoder         : Lavf59.27.100
  Stream #0:0(eng): Video: png, rgb24, 720x720 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 25 fps, 25 tbn (default)
    Metadata:
      DURATION        : 00:00:29.934000000
      encoder         : Lavc59.37.100 png
frame=    0 fps=0.0 q=0.0 Lsize=N/A time=00:00:00.00 bitrate=N/A speed=   0x    
video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)


  


  Manjaro OS System Specs :

  


  System:&#xA;  Kernel: 6.1.12-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1&#xA;    parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1-x86_64&#xA;    root=UUID=f11386cf-342d-47ac-84e6-484b7b2f377d rw rootflags=subvol=@&#xA;    radeon.modeset=1 nvdia-drm.modeset=1 quiet&#xA;    cryptdevice=UUID=059df4b4-5be4-44d6-a23a-de81135eb5b4:luks-disk&#xA;    root=/dev/mapper/luks-disk apparmor=1 security=apparmor&#xA;    resume=/dev/mapper/luks-swap udev.log_priority=3&#xA;  Desktop: KDE Plasma v: 5.26.5 tk: Qt v: 5.15.8 wm: kwin_x11 vt: 1 dm: SDDM&#xA;    Distro: Manjaro Linux base: Arch Linux&#xA;Machine:&#xA;  Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x&#xA;    serial: <superuser required="required"> UEFI: American Megatrends v: 4408&#xA;    date: 10/27/2022&#xA;Battery:&#xA;  Message: No system battery data found. Is one present?&#xA;Memory:&#xA;  RAM: total: 62.71 GiB used: 27.76 GiB (44.3%)&#xA;  RAM Report: permissions: Unable to run dmidecode. Root privileges required.&#xA;CPU:&#xA;  Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3&#x2B; gen: 4&#xA;    level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)&#xA;    model-id: 0x21 (33) stepping: 0 microcode: 0xA201016&#xA;  Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:&#xA;    L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB&#xA;    L3: 64 MiB desc: 2x32 MiB&#xA;  Speed (MHz): avg: 4099 high: 4111 min/max: 2200/6358 boost: disabled&#xA;    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 4099 2: 4095&#xA;    3: 4102 4: 4100 5: 4097 6: 4100 7: 4110 8: 4111 9: 4083 10: 4099 11: 4100&#xA;    12: 4094 13: 4097 14: 4101 15: 4100 16: 4099 17: 4100 18: 4097 19: 4098&#xA;    20: 4095 21: 4100 22: 4099 23: 4099 24: 4105 25: 4098 26: 4100 27: 4100&#xA;    28: 4092 29: 4103 30: 4101 31: 4100 32: 4099 bogomips: 262520&#xA;  Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1&#xA;    bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy&#xA;    constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total&#xA;    cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic&#xA;    extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht&#xA;    hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce&#xA;    misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt&#xA;    nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq&#xA;    pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt&#xA;    pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni&#xA;    skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor&#xA;    svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl&#xA;    v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt&#xA;    x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves&#xA;  Vulnerabilities:&#xA;  Type: itlb_multihit status: Not affected&#xA;  Type: l1tf status: Not affected&#xA;  Type: mds status: Not affected&#xA;  Type: meltdown status: Not affected&#xA;  Type: mmio_stale_data status: Not affected&#xA;  Type: retbleed status: Not affected&#xA;  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via&#xA;    prctl&#xA;  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer&#xA;    sanitization&#xA;  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,&#xA;    STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected&#xA;  Type: srbds status: Not affected&#xA;  Type: tsx_async_abort status: Not affected&#xA;Graphics:&#xA;  Device-1: NVIDIA GA104 [GeForce RTX 3070] vendor: ASUSTeK driver: nvidia&#xA;    v: 525.89.02 alternate: nouveau,nvidia_drm non-free: 525.xx&#x2B;&#xA;    status: current (as of 2023-02) arch: Ampere code: GAxxx&#xA;    process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 8&#xA;    link-max: lanes: 16 bus-ID: 0b:00.0 chip-ID: 10de:2484 class-ID: 0300&#xA;  Device-2: AMD Cape Verde PRO [Radeon HD 7750/8740 / R7 250E]&#xA;    vendor: VISIONTEK driver: radeon v: kernel alternate: amdgpu arch: GCN-1&#xA;    code: Southern Islands process: TSMC 28nm built: 2011-20 pcie: gen: 3&#xA;    speed: 8 GT/s lanes: 8 link-max: lanes: 16 ports: active: DP-3,DP-4&#xA;    empty: DP-1, DP-2, DP-5, DP-6 bus-ID: 0c:00.0 chip-ID: 1002:683f&#xA;    class-ID: 0300 temp: 54.0 C&#xA;  Device-3: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo&#xA;    bus-ID: 9-2:3 chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>&#xA;  Display: x11 server: X.Org v: 21.1.7 with: Xwayland v: 22.1.8&#xA;    compositor: kwin_x11 driver: X: loaded: modesetting,nvidia dri: radeonsi&#xA;    gpu: radeon display-ID: :0 screens: 1&#xA;  Screen-1: 0 s-res: 5760x2160 s-dpi: 80 s-size: 1829x686mm (72.01x27.01")&#xA;    s-diag: 1953mm (76.91")&#xA;  Monitor-1: DP-1 pos: 1-2 res: 1920x1080 dpi: 93&#xA;    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A&#xA;  Monitor-2: DP-1-3 pos: 2-1 res: 1920x1080 dpi: 82&#xA;    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A&#xA;  Monitor-3: DP-1-4 pos: 1-1 res: 1920x1080 dpi: 93&#xA;    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A&#xA;  Monitor-4: DP-3 pos: primary,2-2 res: 1920x1080 dpi: 82&#xA;    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A&#xA;  Monitor-5: DP-4 pos: 2-4 res: 1920x1080 dpi: 82&#xA;    size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A&#xA;  Monitor-6: HDMI-0 pos: 1-3 res: 1920x1080 dpi: 93&#xA;    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A&#xA;  API: OpenGL v: 4.6.0 NVIDIA 525.89.02 renderer: NVIDIA GeForce RTX&#xA;    3070/PCIe/SSE2 direct-render: Yes&#xA;Audio:&#xA;  Device-1: NVIDIA GA104 High Definition Audio vendor: ASUSTeK&#xA;    driver: snd_hda_intel bus-ID: 5-1:2 v: kernel chip-ID: 30be:1019 pcie:&#xA;    class-ID: 0102 gen: 4 speed: 16 GT/s lanes: 8 link-max: lanes: 16&#xA;    bus-ID: 0b:00.1 chip-ID: 10de:228b class-ID: 0403&#xA;  Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000&#xA;    Series] vendor: VISIONTEK driver: snd_hda_intel v: kernel pcie: gen: 3&#xA;    speed: 8 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 0c:00.1&#xA;    chip-ID: 1002:aab0 class-ID: 0403&#xA;  Device-3: AMD Starship/Matisse HD Audio vendor: ASUSTeK&#xA;    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16&#xA;    bus-ID: 0e:00.4 chip-ID: 1022:1487 class-ID: 0403&#xA;  Device-4: Schiit Audio Unison Universal Dac type: USB driver: snd-usb-audio&#xA;  Device-5: JMTek LLC. Plugable USB Audio Device type: USB&#xA;    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-2:3 chip-ID: 0c76:120b&#xA;    class-ID: 0300 serial: <filter>&#xA;  Device-6: ASUSTek ASUS AI Noise-Cancelling Mic Adapter type: USB&#xA;    driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-4:4 chip-ID: 0b05:194e&#xA;    class-ID: 0300 serial: <filter>&#xA;  Device-7: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo&#xA;    bus-ID: 9-2:3 chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>&#xA;  Sound API: ALSA v: k6.1.12-1-MANJARO running: yes&#xA;  Sound Interface: sndio v: N/A running: no&#xA;  Sound Server-1: PulseAudio v: 16.1 running: no&#xA;  Sound Server-2: PipeWire v: 0.3.65 running: yes&#xA;Network:&#xA;  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel&#xA;    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 07:00.0&#xA;    chip-ID: 8086:1539 class-ID: 0200&#xA;  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>&#xA;  IP v4: <filter> type: dynamic noprefixroute scope: global&#xA;    broadcast: <filter>&#xA;  IP v6: <filter> type: noprefixroute scope: link&#xA;  IF-ID-1: docker0 state: down mac: <filter>&#xA;  IP v4: <filter> scope: global broadcast: <filter>&#xA;  WAN IP: <filter>&#xA;Bluetooth:&#xA;  Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB&#xA;    driver: btusb v: 0.8 bus-ID: 5-5.3:7 chip-ID: 0a12:0001 class-ID: e001&#xA;  Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends&#xA;Logical:&#xA;  Message: No logical block device data found.&#xA;  Device-1: luks-c847cf9f-c6b5-4624-a25e-4531e318851a maj-min: 254:2&#xA;    type: LUKS dm: dm-2 size: 3.64 TiB&#xA;  Components:&#xA;  p-1: sda1 maj-min: 8:1 size: 3.64 TiB&#xA;  Device-2: luks-swap maj-min: 254:1 type: LUKS dm: dm-1 size: 12 GiB&#xA;  Components:&#xA;  p-1: nvme0n1p2 maj-min: 259:2 size: 12 GiB&#xA;  Device-3: luks-disk maj-min: 254:0 type: LUKS dm: dm-0 size: 919.01 GiB&#xA;  Components:&#xA;  p-1: nvme0n1p3 maj-min: 259:3 size: 919.01 GiB&#xA;RAID:&#xA;  Message: No RAID data found.&#xA;Drives:&#xA;  Local Storage: total: 9.1 TiB used: 2.79 TiB (30.6%)&#xA;  SMART Message: Unable to run smartctl. Root privileges required.&#xA;  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital&#xA;    model: WDS100T3X0C-00SJG0 size: 931.51 GiB block-size: physical: 512 B&#xA;    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>&#xA;    rev: 111110WD temp: 53.9 C scheme: GPT&#xA;  ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Western Digital&#xA;    model: WDS100T2B0C-00PXH0 size: 931.51 GiB block-size: physical: 512 B&#xA;    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>&#xA;    rev: 211070WD temp: 46.9 C scheme: GPT&#xA;  ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital&#xA;    model: WD4005FZBX-00K5WB0 size: 3.64 TiB block-size: physical: 4096 B&#xA;    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>&#xA;    rev: 1A01 scheme: GPT&#xA;  ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital&#xA;    model: WD4005FZBX-00K5WB0 size: 3.64 TiB block-size: physical: 4096 B&#xA;    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>&#xA;    rev: 1A01 scheme: GPT&#xA;  ID-5: /dev/sdc maj-min: 8:32 type: USB vendor: SanDisk&#xA;    model: Gaming Xbox 360 size: 7.48 GiB block-size: physical: 512 B&#xA;    logical: 512 B type: N/A serial: <filter> rev: 8.02 scheme: MBR&#xA;  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?&#xA;  Message: No optical or floppy data found.&#xA;Partition:&#xA;  ID-1: / raw-size: 919.01 GiB size: 919.01 GiB (100.00%)&#xA;    used: 611.14 GiB (66.5%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0&#xA;    mapped: luks-disk label: N/A uuid: N/A&#xA;  ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)&#xA;    used: 40.2 MiB (7.9%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: EFI&#xA;    uuid: 8922-E04D&#xA;  ID-3: /home raw-size: 919.01 GiB size: 919.01 GiB (100.00%)&#xA;    used: 611.14 GiB (66.5%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0&#xA;    mapped: luks-disk label: N/A uuid: N/A&#xA;  ID-4: /run/media/sarah/ConvergentRefuge raw-size: 3.64 TiB&#xA;    size: 3.64 TiB (100.00%) used: 2.19 TiB (60.1%) fs: btrfs dev: /dev/dm-2&#xA;    maj-min: 254:2 mapped: luks-c847cf9f-c6b5-4624-a25e-4531e318851a&#xA;    label: ConvergentRefuge uuid: 7d295e73-4143-4eb1-9d22-75a06b1d2984&#xA;  ID-5: /run/media/sarah/MSS_EXtended raw-size: 475.51 GiB&#xA;    size: 475.51 GiB (100.00%) used: 1.48 GiB (0.3%) fs: btrfs&#xA;    dev: /dev/nvme1n1p1 maj-min: 259:5 label: MSS EXtended&#xA;    uuid: f98b3a12-e0e4-48c7-91c2-6e3aa6dcd32c&#xA;Swap:&#xA;  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)&#xA;  ID-1: swap-1 type: partition size: 12 GiB used: 6.86 GiB (57.2%)&#xA;    priority: -2 dev: /dev/dm-1 maj-min: 254:1 mapped: luks-swap label: SWAP&#xA;    uuid: c8991364-85a7-4e6c-8380-49cd5bd7a873&#xA;Unmounted:&#xA;  ID-1: /dev/nvme1n1p2 maj-min: 259:6 size: 456 GiB fs: ntfs label: N/A&#xA;    uuid: 5ECA358FCA356485&#xA;  ID-2: /dev/sdb1 maj-min: 8:17 size: 3.64 TiB fs: ntfs&#xA;    label: JerichoVariance uuid: 1AB22D5664889CBD&#xA;  ID-3: /dev/sdc1 maj-min: 8:33 size: 3.57 GiB fs: iso9660&#xA;  ID-4: /dev/sdc2 maj-min: 8:34 size: 4 MiB fs: vfat label: MISO_EFI&#xA;    uuid: 5C67-4BF8&#xA;USB:&#xA;  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Hub-2: 1-2:2 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s&#xA;    chip-ID: 045b:0209 class-ID: 0900&#xA;  Device-1: 1-2.4:3 info: Microsoft Xbox One Controller (Firmware 2015)&#xA;    type: <vendor specific="specific"> driver: xpad interfaces: 3 rev: 2.0 speed: 12 Mb/s&#xA;    power: 500mA chip-ID: 045e:02dd class-ID: ff00 serial: <filter>&#xA;  Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-4: 2-2:2 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 045b:0210 class-ID: 0900&#xA;  Hub-5: 3-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Hub-6: 3-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 2109:3431 class-ID: 0900&#xA;  Hub-7: 3-1.2:3 info: VIA Labs VL813 Hub ports: 4 rev: 2.1 speed: 480 Mb/s&#xA;    chip-ID: 2109:2813 class-ID: 0900&#xA;  Hub-8: 4-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-9: 4-2:2 info: VIA Labs VL813 Hub ports: 4 rev: 3.0 speed: 5 Gb/s&#xA;    chip-ID: 2109:0813 class-ID: 0900&#xA;  Hub-10: 5-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Device-1: 5-1:2 info: Schiit Audio Unison Universal Dac type: Audio&#xA;    driver: snd-usb-audio interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA&#xA;    chip-ID: 30be:1019 class-ID: 0102&#xA;  Device-2: 5-2:3 info: JMTek LLC. Plugable USB Audio Device type: Audio,HID&#xA;    driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1&#xA;    speed: 12 Mb/s power: 100mA chip-ID: 0c76:120b class-ID: 0300&#xA;    serial: <filter>&#xA;  Device-3: 5-4:4 info: ASUSTek ASUS AI Noise-Cancelling Mic Adapter&#xA;    type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4&#xA;    rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 0b05:194e class-ID: 0300&#xA;    serial: <filter>&#xA;  Hub-11: 5-5:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 05e3:0608 class-ID: 0900&#xA;  Device-1: 5-5.3:7 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)&#xA;    type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s&#xA;    power: 100mA chip-ID: 0a12:0001 class-ID: e001&#xA;  Hub-12: 5-6:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 05e3:0608 class-ID: 0900&#xA;  Hub-13: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-14: 7-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Device-1: 7-2:2 info: SanDisk Cruzer Micro Flash Drive type: Mass Storage&#xA;    driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA&#xA;    chip-ID: 0781:5151 class-ID: 0806 serial: <filter>&#xA;  Device-2: 7-4:3 info: ASUSTek AURA LED Controller type: HID&#xA;    driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA&#xA;    chip-ID: 0b05:18f3 class-ID: 0300 serial: <filter>&#xA;  Hub-15: 8-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;  Hub-16: 9-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0&#xA;    speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900&#xA;  Hub-17: 9-1:2 info: Terminus FE 2.1 7-port Hub ports: 7 rev: 2.0&#xA;    speed: 480 Mb/s power: 100mA chip-ID: 1a40:0201 class-ID: 0900&#xA;  Device-1: 9-1.1:4 info: Sunplus Innovation Gaming mouse [Philips SPK9304]&#xA;    type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s&#xA;    power: 98mA chip-ID: 1bcf:08a0 class-ID: 0301&#xA;  Device-2: 9-1.5:6 info: Microdia Backlit Gaming Keyboard&#xA;    type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0&#xA;    speed: 12 Mb/s power: 400mA chip-ID: 0c45:652f class-ID: 0301&#xA;  Device-3: 9-1.6:7 info: HUION H420 type: Mouse,HID driver: uclogic,usbhid&#xA;    interfaces: 3 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 256c:006e&#xA;    class-ID: 0300&#xA;  Hub-18: 9-1.7:8 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 100mA chip-ID: 1a40:0101 class-ID: 0900&#xA;  Device-1: 9-2:3 info: Microdia USB 2.0 Camera type: Video,Audio&#xA;    driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s&#xA;    power: 500mA chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>&#xA;  Device-2: 9-4:11 info: VKB-Sim &#xA9; Alex Oz 2021 VKBsim Gladiator EVO L&#xA;    type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s&#xA;    power: 500mA chip-ID: 231d:0201 class-ID: 0300&#xA;  Hub-19: 10-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s&#xA;    chip-ID: 1d6b:0003 class-ID: 0900&#xA;Sensors:&#xA;  System Temperatures: cpu: 38.0 C mobo: 41.0 C&#xA;  Fan Speeds (RPM): fan-1: 702 fan-2: 747 fan-3: 938 fan-4: 889 fan-5: 3132&#xA;    fan-6: 0 fan-7: 0&#xA;  GPU: device: nvidia screen: :0.0 temp: 49 C fan: 0% device: radeon&#xA;    temp: 53.0 C&#xA;Info:&#xA;  Processes: 842 Uptime: 3h 11m wakeups: 0 Init: systemd v: 252&#xA;  default: graphical tool: systemctl Compilers: gcc: 12.2.1 alt: 10/11&#xA;  clang: 15.0.7 Packages: 2158 pm: pacman pkgs: 2110 libs: 495 tools: pamac,yay&#xA;  pm: flatpak pkgs: 31 pm: snap pkgs: 17 Shell: Bash v: 5.1.16&#xA;  running-in: yakuake inxi: 3.3.25&#xA;</filter></filter></filter></filter></filter></filter></vendor></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></superuser>