Recherche avancée

Sur d’autres sites (9132)

• SDL2 won't play with more than 6 audio channels

  13 juin 2020, par Hiko Haieto

  I am trying to stream (raw) video and audio from a capture device as part of my home media setup (with my pc acting similarly to a receiver in a typical home theatre setup), but the biggest problem I haven't been able to get past is that I haven't been able to get ffplay (using SDL2 as its audio backend) to work with all 8 channels in 7.1 streams - two simply get dropped, despite it recognising 8 channel input or me specifying a 7.1 layout.

  



  I have been able to confirm that all 8 channels are present in the source by first using ffmpeg to save the output of a speaker test to a file and playing that back with both mplayer (which works) and ffplay (which doesn't). I also wrote some minimal code to play the audio directly through SDL's API with the same result, so it's not the fault of ffplay. I might simply use mplayer if it weren't for the fact that piping output from ffmpeg adds too much latency for real-time use. I am using libSDL version 2.0.12 and ffplay 4.2.3, both of which are the latest at the time of writing and are ostensibly supposed to support 7.1 audio.

  



  Using output recorded from speaker-test -c 8, I am using the following to play it back in mplayer :

  



  mplayer -channels 8 -rawaudio channels=8 -format s16le -demuxer rawaudio speaker-test.pcm


  



  and the following to play it back in ffplay :

  



  ffplay -f s16le -ac 8 -af 'channelmap=channel_layout=7.1' speaker-test.pcm


  



  No matter what I try, the two side channels get dropped. I couldn't figure out how to play raw pcm in SDL, so I repeated the same tests with wav output and used the following code to play it back :

  



  #include <sdl2></sdl2>SDL.h>&#xA;&#xA;int main(int argc, char **argv) {&#xA;    SDL_Init(SDL_INIT_AUDIO);&#xA;    SDL_AudioSpec wavSpec;&#xA;    Uint32 wavLength;&#xA;    Uint8 *wavBuffer;&#xA;    SDL_LoadWAV("speaker-test.wav", &amp;wavSpec, &amp;wavBuffer, &amp;wavLength);&#xA;    SDL_AudioDeviceID deviceID = SDL_OpenAudioDevice(NULL, 0, &amp;wavSpec, NULL, 0);&#xA;    SDL_QueueAudio(deviceID, wavBuffer, wavLength);&#xA;    SDL_PauseAudioDevice(deviceID, 0);&#xA;    SDL_Delay(30000);&#xA;    SDL_CloseAudioDevice(deviceID);&#xA;    SDL_FreeWAV(wavBuffer);&#xA;    SDL_Quit();&#xA;    return 0;&#xA;}&#xA;

  



  The above code exhibits the same behaviour of dropping the two additional side channels, despite it being the latest version of SDL that should have supported 7.1 for many releases now. Why might this be happening, and how might I fix it ?

  


• ClassX installation "codec not found" due to dependencies [migrated]

  25 mars 2014, par khateeb

  ClassX is an interactive lecture streaming system developed in the Electrical Engineering Department at Stanford University.
  Unlike conventional lecture capturing systems, ClassX requires very simple consumer-grade equipment and minimal human operation.

  I faced problems during installing it, I hope you have a solution.

  BTW : I successfully installed it 2 years ago, but now I think the problem as the dependencies and Ubuntu versions are different than the versions we used two years ago.

  Detailed description of the problem :

  • I'm using Ubuntu 12.04
  • I followed the instructions @ ClassX installation guide, and all steps till step 4 are successfully done (the encoder bin file generated).
  • When trying to encode the video using the classX web system, it shows the encoding completed after few seconds.However, there are no tiles generated.

  • I tried to execute the command at CX_log.txt, and the following error appears.

    mahmoud@Mahmoud-HP-Pavilion-dv5-Notebook-PC : $ sudo perl /var/www/ClassXWebSystem/system/publishers/web/actions/encode.pl "/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/lecSEven" "/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/.encoding_1372706251" "/var/www/ClassXWebSystem/content/streaming/FALL_2013_2014/CS106A_FALL_2013_2014/lecSEven" "/var/www/ClassXWebSystem/system/publishers/bin" classx y n n
    [sudo] password for mahmoud :
    00068.jpg
    ..
    .
    00068.mp4
    Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/.encoding_1372706251/00068.mp4' :
    Metadata :
    major_brand : isom
    minor_version : 512
    compatible_brands : isomiso2avc1mp41
    encoder : Lavf52.39.0
    Duration : 00:02:30.05, start : 0.000000, bitrate : 8141 kb/s
    Stream #0.0(und) : Video : h264, yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 8007 kb/s, 29.95 fps, 29.97 tbr, 2997 tbn, 59.94 tbc
    Stream #0.1(und) : Audio : aac, 44100 Hz, stereo, s16, 128 kb/s
    Output #0, mp4, to '/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/.encoding_1372706251/stream0.mp4' :
    Stream #0.0 : Video : [0][0][0][0] / 0x0000, yuv420p, 640x360, q=32-36, 64 kb/s, 90k tbn, 14.99 tbc
    codec not found

• ClassX installation "codec not found" due to dependencies [migrated]

  25 mars 2014, par khateeb

  ClassX is an interactive lecture streaming system developed in the Electrical Engineering Department at Stanford University.
  Unlike conventional lecture capturing systems, ClassX requires very simple consumer-grade equipment and minimal human operation.

  I faced problems during installing it, I hope you have a solution.

  BTW : I successfully installed it 2 years ago, but now I think the problem as the dependencies and Ubuntu versions are different than the versions we used two years ago.

  Detailed description of the problem :

  • I’m using Ubuntu 12.04
  • I followed the instructions @ ClassX installation guide, and all steps till step 4 are successfully done (the encoder bin file generated).
  • When trying to encode the video using the classX web system, it shows the encoding completed after few seconds.However, there are no tiles generated.

  • I tried to execute the command at CX_log.txt, and the following error appears.

    mahmoud@Mahmoud-HP-Pavilion-dv5-Notebook-PC : $ sudo perl /var/www/ClassXWebSystem/system/publishers/web/actions/encode.pl "/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/lecSEven" "/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/.encoding_1372706251" "/var/www/ClassXWebSystem/content/streaming/FALL_2013_2014/CS106A_FALL_2013_2014/lecSEven" "/var/www/ClassXWebSystem/system/publishers/bin" classx y n n
    [sudo] password for mahmoud :
    00068.jpg
    ..
    .
    00068.mp4
    Input #0, mov,mp4,m4a,3gp,3g2,mj2, from ’/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/.encoding_1372706251/00068.mp4’ :
    Metadata :
    major_brand : isom
    minor_version : 512
    compatible_brands : isomiso2avc1mp41
    encoder : Lavf52.39.0
    Duration : 00:02:30.05, start : 0.000000, bitrate : 8141 kb/s
    Stream #0.0(und) : Video : h264, yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 8007 kb/s, 29.95 fps, 29.97 tbr, 2997 tbn, 59.94 tbc
    Stream #0.1(und) : Audio : aac, 44100 Hz, stereo, s16, 128 kb/s
    Output #0, mp4, to ’/var/www/ClassXWebSystem/content/encoding/FALL_2013_2014/CS106A_FALL_2013_2014/.encoding_1372706251/stream0.mp4’ :
    Stream #0.0 : Video : [0][0][0][0] / 0x0000, yuv420p, 640x360, q=32-36, 64 kb/s, 90k tbn, 14.99 tbc
    codec not found