Recherche avancée

Sur d’autres sites (8563)

• FFmpeg stops encoding when log file reaches 388 kB

  30 janvier 2018, par Rune Aspvik

  I’m using ffmpeg in a node application with this command :

  ffmpeg -seekable 0 -i http://127.0.0.1:8100/Mjpeg/1?authToken=xxx -video_size 1280x720 -r 30 -pix_fmt yuv420p -y D:\Video\pflyers\test.mp4

  The encoding would stop after 28:53 every time. After some reading I figured I had to spawn the child instead of exec because of the large sterr output.

  Before doing that I wanted to see if that was in fact the issue so I tried doing :

  -nostats -hide_banner -loglevel panic

  to avoid the large output to sterr. FFmpeg still stopped after 28:53. Further I tried to write the sterr to log.txt instead of using the above code. I did so adding this to the end :

  2> log.txt

  Still it would stop at 28:53.

  Finally I tried running the command in cmd.exe resulting in the encoding stopping at 29:14.

  What I realized comparing the outputs from ffmpeg run from node and run from cmd.exe was that the encoding stopped when the log.txt reached 388kB.

  How can I fix this ?

  Here’s the full output :

  C:\Users\VossVind>ffmpeg -seekable 0 -i http://127.0.0.1:8100/Mjpeg/1?authToken=xxx -video_size 1280x720 -r 30 -pix_fmt yuv420p -y D:\Video\pflyers\test.mp4
  
  ffmpeg version 3.4 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with gcc 7.2.0 (GCC)
  
    configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-bzlib --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-cuda --enable-cuvid --enable-d3d11va --enable-nvenc --enable-dxva2 --enable-avisynth --enable-libmfx
  
    libavutil      55. 78.100 / 55. 78.100
  
    libavcodec     57.107.100 / 57.107.100
  
    libavformat    57. 83.100 / 57. 83.100
  
    libavdevice    57. 10.100 / 57. 10.100
  
    libavfilter     6.107.100 /  6.107.100
  
    libswscale      4.  8.100 /  4.  8.100
  
    libswresample   2.  9.100 /  2.  9.100
  
    libpostproc    54.  7.100 / 54.  7.100
  
  Input #0, mpjpeg, from 'http://127.0.0.1:8100/Mjpeg/1?authToken=xxx':
  
    Duration: N/A, bitrate: N/A
  
      Stream #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown), 1280x720 [SAR 96:96 DAR 16:9], 25 tbr, 25 tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [swscaler @ 0000019639b27fc0] deprecated pixel format used, make sure you did set range correctly
  
  [libx264 @ 0000019639944040] using SAR=1/1
  
  [libx264 @ 0000019639944040] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
  
  [libx264 @ 0000019639944040] profile High, level 3.1
  
  [libx264 @ 0000019639944040] 264 - core 152 r2851 ba24899 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'D:\Video\pflyers\test.mp4':
  
    Metadata:
  
      encoder         : Lavf57.83.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=-1--1, 30 fps, 15360 tbn, 30 tbc
  
      Metadata:
  
        encoder         : Lavc57.107.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  More than 1000 frames duplicated  114432kB time=00:03:17.80 bitrate=4739.3kbits/s dup=1000 drop=0 speed=0.95x
  
  frame=52544 fps= 29 q=-1.0 Lsize= 1050136kB time=00:29:11.36 bitrate=4912.0kbits/s dup=8757 drop=0 speed=0.972x
  
  video:1049508kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.059803%
  
  [libx264 @ 0000019639944040] frame I:261   Avg QP:20.59  size: 51862
  
  [libx264 @ 0000019639944040] frame P:15400 Avg QP:23.72  size: 33007
  
  [libx264 @ 0000019639944040] frame B:36883 Avg QP:24.55  size: 14989
  
  [libx264 @ 0000019639944040] consecutive B-frames:  0.9% 15.8%  2.5% 80.8%
  
  [libx264 @ 0000019639944040] mb I  I16..4: 17.1% 82.1%  0.8%
  
  [libx264 @ 0000019639944040] mb P  I16..4:  4.3% 48.4%  0.2%  P16..4: 12.3%  7.5%  4.8%  0.0%  0.0%    skip:22.5%
  
  [libx264 @ 0000019639944040] mb B  I16..4:  2.7% 15.6%  0.0%  B16..8: 22.3%  7.0%  1.8%  direct: 3.8%  skip:46.8%  L0:52.3% L1:34.0% BI:13.8%
  
  [libx264 @ 0000019639944040] 8x8 transform intra:88.6% inter:92.9%
  
  [libx264 @ 0000019639944040] coded y,uvDC,uvAC intra: 59.4% 33.6% 2.6% inter: 19.3% 10.9% 0.6%
  
  [libx264 @ 0000019639944040] i16 v,h,dc,p: 57% 30% 12%  1%
  
  [libx264 @ 0000019639944040] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 18% 45%  2%  1%  1%  2%  2%  3%
  
  [libx264 @ 0000019639944040] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 52% 24% 12%  2%  2%  2%  2%  2%  2%
  
  [libx264 @ 0000019639944040] i8c dc,h,v,p: 63% 17% 20%  1%
  
  [libx264 @ 0000019639944040] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 0000019639944040] ref P L0: 43.8%  7.5% 29.1% 19.6%
  
  [libx264 @ 0000019639944040] ref B L0: 71.8% 21.2%  7.0%
  
  [libx264 @ 0000019639944040] ref B L1: 93.9%  6.1%
  
  [libx264 @ 0000019639944040] kb/s:4908.78

• FFMPEG image to video showing blank video

  18 avril 2017, par Ravi Rupareliya

  Here is my command to create a video from multiple images.

  File f = new File(Environment.getExternalStorageDirectory() + "/abc.mp4");
  
  
  
  try {
  
      f.createNewFile();
  
      ffmpeg.execute(new String[]{"-y","-r","1/5","-i","" + "/" + "image%01d.jpg","-pix_fmt","yuv420p","-c:v","libx264","-crf","23","-s","640x480",f.getPath()}, listener);
  
  } catch (Exception e) {
  
      e.printStackTrace();
  
  }

  I have multiple images available at with having names like image1.jpg, image2.jpg etc etc.

  It is creating video file with some 100-200 KB but it showing blank images in VLC player.

  When i try to run it with Windows Media Player, it only runs if it is in repeat mode from player, otherwise it is not playing.

  Output in onSuccess()

  [ffmpeg version n3.0.1 Copyright (c) 2000-2016 the FFmpeg developers
  
  built with gcc 4.8 (GCC)
  
  configuration: --target-os=linux --cross-prefix=/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/bin/i686-linux-android- --arch=x86 --cpu=i686 --enable-runtime-cpudetect --sysroot=/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/sysroot --enable-pic --enable-libx264 --enable-libass --enable-libfreetype --enable-libfribidi --enable-libmp3lame --enable-fontconfig --enable-pthreads --disable-debug --disable-ffserver --enable-version3 --enable-hardcoded-tables --disable-ffplay --disable-ffprobe --enable-gpl --enable-yasm --disable-doc --disable-shared --enable-static --pkg-config=/home/vagrant/SourceCode/ffmpeg-android/ffmpeg-pkg-config --prefix=/home/vagrant/SourceCode/ffmpeg-android/build/x86 --extra-cflags='-I/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/include -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fno-strict-overflow -fstack-protector-all -march=i686' --extra-ldflags='-L/home/vagrant/SourceCode/ffmpeg-android/toolchain-android/lib -Wl,-z,relro -Wl,-z,now -pie' --extra-libs='-lpng -lexpat -lm' --extra-cxxflags=
  
  libavutil      55. 17.103 / 55. 17.103
  
  libavcodec     57. 24.102 / 57. 24.102
  
  libavformat    57. 25.100 / 57. 25.100
  
  libavdevice    57.  0.101 / 57.  0.101
  
  libavfilter     6. 31.100 /  6. 31.100
  
  libswscale      4.  0.100 /  4.  0.100
  
  libswresample   2.  0.101 /  2.  0.101
  
  libpostproc    54.  0.100 / 54.  0.100
  
  [mjpeg @ 0xb97270a0] Changing bps to 8
  
  Input #0, image2, from '/storage/emulated/0/Download/image%01d.jpg':
  
  Duration: 00:00:00.08, start: 0.000000, bitrate: N/A
  
  Stream #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown), 464x317 [SAR 1:1 DAR 464:317], 25 tbr, 25 tbn, 25 tbc
  
  [swscaler @ 0xb9741480] deprecated pixel format used, make sure you did set range correctly
  
  [libx264 @ 0xb97287c0] using SAR=348/317
  
  [libx264 @ 0xb97287c0] using cpu capabilities: none!
  
  [libx264 @ 0xb97287c0] profile High, level 2.2
  
  [libx264 @ 0xb97287c0] 264 - core 148 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=1 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to '/storage/emulated/0/abc.mp4':
  
  Metadata:
  
  encoder         : Lavf57.25.100
  
  Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 640x480 [SAR 348:317 DAR 464:317], q=-1--1, 0.20 fps, 16384 tbn, 0.20 tbc
  
  Metadata:
  
  encoder         : Lavc57.24.102 libx264
  
  Side data:
  
  unknown side data type 10 (24 bytes)
  
  Stream mapping:
  
  Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  Input stream #0:0 frame changed from size:464x317 fmt:yuvj420p to size:313x470 fmt:yuvj420p
  
  [swscaler @ 0xb9752fc0] deprecated pixel format used, make sure you did set range correctly
  
  frame=    2 fps=0.0 q=-1.0 Lsize=      64kB time=00:00:10.00 bitrate=  52.4kbits/s speed=34.3x    
  
  video:63kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.310563%
  
  [libx264 @ 0xb97287c0] frame I:1     Avg QP:14.14  size: 23785
  
  [libx264 @ 0xb97287c0] frame P:1     Avg QP:17.01  size: 40246
  
  [libx264 @ 0xb97287c0] mb I  I16..4:  3.3% 82.2% 14.4%
  
  [libx264 @ 0xb97287c0] mb P  I16..4:  2.0% 88.1%  9.9%  P16..4:  0.0%  0.0%  0.0%  0.0%  0.0%    skip: 0.0%
  
  [libx264 @ 0xb97287c0] 8x8 transform intra:85.2%
  
  [libx264 @ 0xb97287c0] coded y,uvDC,uvAC intra: 93.3% 82.2% 71.0%
  
  [libx264 @ 0xb97287c0] i16 v,h,dc,p:  5%  3%  3% 89%
  
  [libx264 @ 0xb97287c0] i8 v,h,dc,ddl,ddr,vr,

• Multiple format changes in FFmpeg for thermal camera

  6 février 2023, par Greynol4

  I'm having trouble generating a command to process output from a uvc thermal camera's raw data so that it can be colorized and then output to a virtual device with the intention of streaming it over rtsp. This is on a raspberry pi 3B+ with 32bit bullseye.

  


  The original code that works perfectly for previewing it is :

  


  ffmpeg -input_format yuyv422 -video_size 256x384 -i /dev/video0 -vf 'crop=h=(ih/2):y=(ih/2)' -pix_fmt yuyv422 -f rawvideo - | ffplay -pixel_format gray16le -video_size 256x192 -f rawvideo -i - -vf 'normalize=smoothing=10, format=pix_fmts=rgb48, pseudocolor=p=inferno'


  


  Essentially what this is doing is taking the raw data, cutting the useful portion out, then piping it to ffplay where it is seen as 16bit grayscale (in this case gray16le), then it is normalized, formatted to 48 bit rgb and then a pseudocolor filter is applied.

  


  I haven't been able to get this to translate into ffmpeg-only because it throws codec errors or format errors or converts the 16bit to 10bit even though I need the 16bit. I have tried using v4l2loopback and two instances of ffmpeg in separate windows to see if I could figure out where the error was actually occuring but I suspect that is introducing more format issues that are distracting from the original problem. The closest I have been able to get is

  


  ffmpeg -input_format yuyv422 -video_size 256x384 -i /dev/video0 -vf 'crop=h=(ih/2):y=(ih/2)' -pix_fmt yuyv422 -f rawvideo /dev/video3

  


  Followed by

  


  ffmpeg -video_size 256x192 -i /dev/video3  -f rawvideo -pix_fmt gray16le -vf 'normalize=smoothing=10,format=pix_fmts=rgb48, pseudocolor=p=inferno' -f rawvideo -f v4l2 /dev/video4

  


  This results in a non colorized but somewhat useful image with certain temperatures showing as missing pixels as opposed to the command with ffplay where it shows a properly colorized stream without missing pixels.

  


  I'll include my configuration and log from the preview command but the log doesn't show errors unless I try to modify parameters and presumably mess up the syntax.

  


   ffmpeg -input_format yuyv422 -video_size 256x384 -i /dev/video0 -vf 'crop=h=(ih/2):y=(ih/2)' -pix_fmt yuyv422 -f rawvideo - | ffplay -pixel_format gray16le -video_size 256x192 -f rawvideo -i - -vf 'normalize=smoothing=10, format=pix_fmts=rgb48, pseudocolor=p=inferno'
ffplay version N-109758-gbdc76f467f Copyright (c) 2003-2023 the FFmpeg developers
  built with gcc 10 (Raspbian 10.2.1-6+rpi1)
  configuration: --prefix=/usr/local --enable-nonfree --enable-gpl --enable-hardcoded-tables --disable-ffprobe --disable-ffplay --enable-libx264 --enable-libx265 --enable-sdl --enable-sdl2 --enable-ffplay
  libavutil      57. 44.100 / 57. 44.100
  libavcodec     59. 63.100 / 59. 63.100
  libavformat    59. 38.100 / 59. 38.100
  libavdevice    59.  8.101 / 59.  8.101
  libavfilter     8. 56.100 /  8. 56.100
  libswscale      6.  8.112 /  6.  8.112
  libswresample   4.  9.100 /  4.  9.100
  libpostproc    56.  7.100 / 56.  7.100
ffmpeg version N-109758-gbdc76f467f Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 10 (Raspbian 10.2.1-6+rpi1)
  configuration: --prefix=/usr/local --enable-nonfree --enable-gpl --enable-hardcoded-tables --disable-ffprobe --disable-ffplay --enable-libx264 --enable-libx265 --enable-sdl --enable-sdl2 --enable-ffplay
  libavutil      57. 44.100 / 57. 44.100
  libavcodec     59. 63.100 / 59. 63.100
  libavformat    59. 38.100 / 59. 38.100
  libavdevice    59.  8.101 / 59.  8.101
  libavfilter     8. 56.100 /  8. 56.100
  libswscale      6.  8.112 /  6.  8.112
  libswresample   4.  9.100 /  4.  9.100
  libpostproc    56.  7.100 / 56.  7.100
Input #0, video4linux2,v4l2, from '/dev/video0':B sq=    0B f=0/0   
  Duration: N/A, start: 242.040935, bitrate: 39321 kb/s
  Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 256x384, 39321 kb/s, 25 fps, 25 tbr, 1000k tbn
Stream mapping:.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
  Stream #0:0 -> #0:0 (rawvideo (native) -> rawvideo (native))
Press [q] to stop, [?] for help
Output #0, rawvideo, to 'pipe:':   0KB vq=    0KB sq=    0B f=0/0   
  Metadata:
    encoder         : Lavf59.38.100
  Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422(tv, progressive), 256x192, q=2-31, 19660 kb/s, 25 fps, 25 tbn
    Metadata:
      encoder         : Lavc59.63.100 rawvideo
frame=    0 fps=0.0 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbInput #0, rawvideo, from 'fd:':    0KB vq=    0KB sq=    0B f=0/0   
  Duration: N/A, start: 0.000000, bitrate: 19660 kb/s
  Stream #0:0: Video: rawvideo (Y1[0][16] / 0x10003159), gray16le, 256x192, 19660 kb/s, 25 tbr, 25 tbn
frame=   13 fps=0.0 q=-0.0 size=    1152kB time=00:00:00.52 bitrate=18148.4kbitsframe=   25 fps= 24 q=-0.0 size=    2304kB time=00:00:01.00 bitrate=18874.4kbitsframe=   39 fps= 25 q=-0.0 size=    3648kB time=00:00:01.56 bitrate=19156.7kbitsframe=   51 fps= 24 q=-0.0 size=    4800kB time=00:00:02.04 bitrate=19275.3kbitsframe=   64 fps= 24 q=-0.0 size=    6048kB time=00:00:02.56 bitrate=19353.6kbitsframe=   78 fps= 25 q=-0.0 size=    7392kB time=00:00:03.12 bitrate=19408.7kbits




  


  I'd also like to use the correct option so it isn't scrolling though every frame in the log as well as links to resources for adapting a command to a script for beginners even though that's outside the purview of this question so any direction on those would be much appreciated.