Sur d’autres sites (7176)

• What is Google Analytics data sampling and what’s so bad about it ?

  16 août 2019, par Joselyn Khor — Analytics Tips, Development
  What is Google Analytics data sampling, and what’s so bad about it ?

  Google (2019) explains what data sampling is :

  “In data analysis, sampling is the practice of analysing a subset of all data in order to uncover the meaningful information in the larger data set.”[1]

  This is basically saying instead of analysing all of the data, there’s a threshold on how much data is analysed and any data after that will be an assumption based on patterns.

  Google’s (2019) data sampling thresholds :

  Ad-hoc queries of your data are subject to the following general thresholds for sampling :
  [Google] Analytics Standard : 500k sessions at the property level for the date range you are using
  [Google] Analytics 360 : 100M sessions at the view level for the date range you are using (para. 3) [2]

  This threshold is limiting because your data in GA may become more inaccurate as the traffic to your website increases.

  Say you’re looking through all your traffic data from the last year and find you have 5 million page views. Only 500K of that 5 million is accurate ! The data for the remaining 4.5 million (90%) is an assumption based on the 500K sample size.

  This is a key weapon Google uses to sell to large businesses. In order to increase that threshold for more accurate reporting, upgrading to premium Google Analytics 360 for approximately US$150,000 per year seems to be the only choice.

  What’s so bad about data sampling ?

  It’s unfair to say sampled data is to be disregarded completely. There is a calculation ensuring it is representative and can allow you to get good enough insights. However, we don’t encourage it as we don’t just want “good enough” data. We want the actual facts.

  In a recent survey sent to Matomo customers, we found a large proportion of users switched from GA to Matomo due to the data sampling issue.

  The two reasons why data sampling isn’t preferable : 

  1. If the selected sample size is too small, you won’t get a good representative of all the data. 
  2. The bigger your website grows, the more inaccurate your reports will become.

  An example of why we don’t fully trust sampled data is, say you have an ecommerce store and see your GA revenue reports aren’t matching the actual sales data, due to data sampling. In GA you may be seeing revenue for the month as $1 million, instead of actual sales of $800K.

  The sampling here has caused an inaccuracy that could have negative financial implications. What you get in the GA report is an estimated dollar figure rather than the actual sales. Making decisions based on inaccurate data can be costly in this case. 

  Another disadvantage to sampled data is that you might be missing out on opportunities you would’ve noticed if you were given a view of the whole. E.g. not being able to see real patterns occurring due to the data already being predicted. 

  By not getting a chance to see things as they are and only being able to jump to the conclusions and assumptions made by GA is risky. The bigger your business grows, the less you can risk making business decisions based on assumptions that could be inaccurate. 

  If you feel you could be missing out on opportunities because your GA data is sampled data, get 100% accurately reported data. 

  The benefits of 100% accurate data

  Matomo doesn’t use data sampling on any of our products or plans. You get to see all of your data and not a sampled data set.

  Data quality is necessary for high impact decision-making. It’s hard to make strategic changes if you don’t have confidence that your data is reliable and accurate.

  Learn about how Matomo is a serious contender to Google Analytics 360. 

  Now you can import your Google Analytics data directly into your Matomo

  If you’re wanting to make the switch to Matomo but worried about losing all your historic Google Analytics data, you can now import this directly into your Matomo with the Google Analytics Importer tool.

  
  Take the challenge !

  Compare your Google Analytics data (sampled data) against your Matomo data, or if you don’t have Matomo data yet, sign up to our 30-day free trial and start tracking !

  References :

  [1 & 2] About data sampling. (2019). In Analytics Help About data sampling. Retrieved August 14, 2019, from https://support.google.com/analytics/answer/2637192

• Capture from multiple streams concurrently, best way to do it and how to reduce CPU usage

  19 juin 2019, par DRONE_6969

  I am currently in the process of writing an application that will capture a lot of RTSP streams(in my case its 12) and display it on the QT widget. The problem arouses when I am going beyond around 6-7 streams, the CPU usage spikes and there is visible stutter.

  The reason why I think that it is not QT draw function is because I have done some checking to measure how much time it takes to draw an incoming image from camera and just sample images I had, it is always a lot less than 33 milliseconds(even if there are 12 widgets being updated).

  I also just ran opencv capture method without drawing and got pretty much the same CPU consumption as if I was drawing the frames (lost like 10% CPU at most and GPU usage went to zero).

  IMPORTANT : I am using RTSP stream which is a h264 stream.

  IF IT MATTERS MY SPECS :

  Intel Core i7-6700 @ 3.40GHZ(8 CPUS)
  Memory : 16gb
  GPU : Intel HD Graphics 530

  (Also I ran my code on a computer with dedicated Graphics card, it did eliminate some stutter but CPU usage is still pretty high)

  I am currently using OPENCV 4.1.0 with GSTREAMER enabled and built, I also have the OPENCV-WORLD version, there is no difference in performance.

  I have created a special class called Camera that holds its frame size constraints and various control functions as well stream function. The stream function is being ran on a separate thread, whenever stream() function is done with current frame it sends ready Mat via onNewFrame event I created which converts to QPixmap and updates widget’s lastImage variable. This way I can update image in a more thread safe way.

  I have tried to manipulate those VideoCapture.set() values, but it didn’t really help.

  This is my stream function (Ignore the bool return, it doesn’t do anything it is a remnant from couple of minutes ago when I was trying to use std::async) :

  bool Camera::stream() {
  
      /* This function is meant to run on a separate thread and fill up the buffer independantly of
  
      main stream thread */
  
      //cv::setNumThreads(100);
  
      /* Rules for these slightly changed! */
  
      Mat pre;  // Grab initial undoctored frame
  
      //pre = Mat::zeros(size, CV_8UC1);
  
      Mat frame; // Final modified frame
  
      frame = Mat::zeros(size, CV_8UC1);
  
      if (!pre.isContinuous()) pre = pre.clone();
  
  
  
      ipCam.open(streamUrl, CAP_FFMPEG);
  
  
  
  
  
      while (ipCam.isOpened() && capture) {
  
          // If camera is opened wel need to capture and process the frame
  
          try {
  
              auto start = std::chrono::system_clock::now();
  
  
  
              ipCam >> pre;
  
  
  
              if (pre.empty()) {
  
                  /* Check for blank frame, return error if there is a blank frame*/
  
                  cerr << id << ": ERROR! blank frame grabbed\n";
  
                  for (FrameListener* i : clients) {
  
                      i->onNotification(1); // Notify clients about this shit
  
                  }
  
                  break;
  
              }
  
  
  
              else {
  
                  // Only continue if frame not empty
  
  
  
                  if (pre.cols != size.width && pre.rows != size.height) {
  
                      resize(pre, frame, size);
  
                      pre.release();
  
                  }
  
                  else {
  
                      frame = pre;
  
                  }
  
  
  
                  dPacket* pack = new dPacket{id,&frame};
  
                  for (auto i : clients) {
  
                      i->onPNewFrame(pack);
  
                  }
  
                  frame.release();
  
                  delete pack;
  
              }
  
          }
  
  
  
          catch (int e) {
  
              cout << endl << "-----Exception during capture process! CODE " << e << endl;
  
          }
  
          // End camera manipulations
  
      }
  
  
  
      cout << "Camera timed out, or connection is closed..." << endl;
  
      if (tryResetConnection) {
  
          cout << "Reconnection flag is set, retrying after 3 seconds..." << endl;
  
          for (FrameListener* i : clients) {
  
              i->onNotification(-1); // Notify clients about this shit
  
          }
  
          this_thread::sleep_for(chrono::milliseconds(3000));
  
          stream();
  
      }
  
  
  
      return true;
  
  }

  This is my onPNewFrame function. The conversion is still being done on camera’s thread because it was called within stream() and therefore is within that scope(and I also checked) :

  void GLWidget::onPNewFrame(dPacket* inPack) {
  
      lastFlag = 0;
  
  
  
      if (bufferEnabled) {
  
          buffer.push(QPixmap::fromImage(toQImageFromPMat(inPack->frame)));
  
      }
  
      else {
  
          if (playing) {
  
              /* Only process if this widget is playing */
  
              frameProcessing = true;
  
              lastImage.convertFromImage(toQImageFromPMat(inPack->frame));
  
              frameProcessing = false;
  
          }
  
      }
  
  
  
      if (lastFlag != -1 && !lastImage.isNull()) {
  
          connecting = false;
  
      }
  
      else {
  
          connecting = true;
  
      }
  
  }

  This is my Mat to QImage :

  QImage GLWidget::toQImageFromPMat(cv::Mat* mat) {
  
  
  
  
  
  
  
      return QImage(mat->data, mat->cols, mat->rows, QImage::Format_RGB888).rgbSwapped();

  NOTE : not converting does not result in CPU boost (at least not a significant one).

  Minimal verifiable example

  This program is large. I am going to paste GLWidget.cpp and GLWidget.h as well as Camera.h and Camera.cpp. You can put GLWidget into anything just as long as you spawn more than 6 of it. Camera relies on the CamUtils, but it is possible to just paste url in videocapture

  I also supplied CamUtils, just in case

  Camera.h :

  #pragma once
  
  #include <iostream>
  
  #include <vector>
  
  #include <fstream>
  
  #include <map>
  
  #include <string>
  
  #include <sstream>
  
  #include <algorithm>
  
  #include "FrameListener.h"
  
  #include 
  
  #include <thread>
  
  #include "CamUtils.h"
  
  #include <ctime>
  
  #include "dPacket.h"
  
  
  
  using namespace std;
  
  using namespace cv;
  
  
  
  class Camera
  
  {
  
  
  
      /*
  
          CLEANED UP!
  
          Camera now is only responsible for streaming and echoing captured frames.
  
          Frames are now wrapped into dPacket struct.
  
      */
  
  
  
  
  
  private:
  
      string id;
  
      vector clients;
  
      VideoCapture ipCam;
  
      string streamUrl;
  
      Size size;
  
      bool tryResetConnection = false;
  
  
  
      //TODO: Remove these as they are not going to be used going on:
  
      bool isPlaying = true;
  
      bool capture = true;
  
  
  
      //SECRET FEATURES:
  
      bool detect = false;
  
  
  
  
  
  public:
  
      Camera(string url, int width = 480, int height = 240, bool detect_=false);
  
      bool stream();
  
      void setReconnectable(bool newReconStatus);
  
      void addListener(FrameListener* client);
  
      vector<bool> getState();    // Returns current state: vector[0] stream state; vector[1] stream state; TODO: Remove this as this is no longer should control behaviour
  
      void killStream();
  
      bool getReconnectable();
  
  };
  
  
  
  </bool></ctime></thread></algorithm></sstream></string></map></fstream></vector></iostream>

  Camera.cpp

  #include "Camera.h"
  
  
  
  
  
  Camera::Camera(string url, int width, int height, bool detect_) // Default 240p
  
  {
  
      streamUrl = url; // Prepare url
  
      size = Size(width, height);
  
      detect = detect_;
  
  
  
  }
  
  
  
  void Camera::addListener(FrameListener* client) {
  
      clients.push_back(client);
  
  }
  
  
  
  
  
  /*
  
                  TEST CAMERAS(Paste into cameras.dViewer):
  
                  {"id":"96a73796-c129-46fc-9c01-40acd8ed7122","ip":"176.57.73.231","password":"null","username":"null"},
  
                  {"id":"96a73796-c129-46fc-9c01-40acd8ed7122","ip":"176.57.73.231","password":"null","username":"null"},
  
                  {"id":"96a73796-c129-46fc-9c01-40acd8ed7144","ip":"172.20.101.13","password":"admin","username":"root"}
  
                  {"id":"96a73796-c129-46fc-9c01-40acd8ed7144","ip":"172.20.101.13","password":"admin","username":"root"}
  
  
  
  */
  
  
  
  
  
  
  
  bool Camera::stream() {
  
      /* This function is meant to run on a separate thread and fill up the buffer independantly of
  
      main stream thread */
  
      //cv::setNumThreads(100);
  
      /* Rules for these slightly changed! */
  
      Mat pre;  // Grab initial undoctored frame
  
      //pre = Mat::zeros(size, CV_8UC1);
  
      Mat frame; // Final modified frame
  
      frame = Mat::zeros(size, CV_8UC1);
  
      if (!pre.isContinuous()) pre = pre.clone();
  
  
  
      ipCam.open(streamUrl, CAP_FFMPEG);
  
  
  
      while (ipCam.isOpened() && capture) {
  
          // If camera is opened wel need to capture and process the frame
  
          try {
  
              auto start = std::chrono::system_clock::now();
  
  
  
              ipCam >> pre;
  
  
  
              if (pre.empty()) {
  
                  /* Check for blank frame, return error if there is a blank frame*/
  
                  cerr << id << ": ERROR! blank frame grabbed\n";
  
                  for (FrameListener* i : clients) {
  
                      i->onNotification(1); // Notify clients about this shit
  
                  }
  
                  break;
  
              }
  
  
  
              else {
  
                  // Only continue if frame not empty
  
  
  
                  if (pre.cols != size.width && pre.rows != size.height) {
  
                      resize(pre, frame, size);
  
                      pre.release();
  
                  }
  
                  else {
  
                      frame = pre;
  
                  }
  
  
  
                  auto end = std::chrono::system_clock::now();
  
                  std::time_t ts = std::chrono::system_clock::to_time_t(end);
  
                  dPacket* pack = new dPacket{ id,&frame};
  
                  for (auto i : clients) {
  
                      i->onPNewFrame(pack);
  
                  }
  
                  frame.release();
  
                  delete pack;
  
              }
  
          }
  
  
  
          catch (int e) {
  
              cout << endl << "-----Exception during capture process! CODE " << e << endl;
  
          }
  
          // End camera manipulations
  
      }
  
  
  
      cout << "Camera timed out, or connection is closed..." << endl;
  
      if (tryResetConnection) {
  
          cout << "Reconnection flag is set, retrying after 3 seconds..." << endl;
  
          for (FrameListener* i : clients) {
  
              i->onNotification(-1); // Notify clients about this shit
  
          }
  
          this_thread::sleep_for(chrono::milliseconds(3000));
  
          stream();
  
      }
  
  
  
      return true;
  
  }
  
  
  
  
  
  void Camera::killStream(){
  
      tryResetConnection = false;
  
      capture = false;
  
      ipCam.release();
  
  }
  
  
  
  void Camera::setReconnectable(bool reconFlag) {
  
      tryResetConnection = reconFlag;
  
  }
  
  
  
  bool Camera::getReconnectable() {
  
      return tryResetConnection;
  
  }
  
  
  
  vector<bool> Camera::getState() {
  
      vector<bool> states;
  
      states.push_back(isPlaying);
  
      states.push_back(ipCam.isOpened());
  
      return states;
  
  }
  
  
  
  
  
  
  
  </bool></bool>

  GLWidget.h :

  #ifndef GLWIDGET_H
  
  #define GLWIDGET_H
  
  
  
  #include <qopenglwidget>
  
  #include <qmouseevent>
  
  #include "FrameListener.h"
  
  #include "Camera.h"
  
  #include "FrameListener.h"
  
  #include 
  
  #include "Camera.h"
  
  #include "CamUtils.h"
  
  #include 
  
  #include "dPacket.h"
  
  #include <chrono>
  
  #include <ctime>
  
  #include 
  
  #include "FullScreenVideo.h"
  
  #include <qmovie>
  
  #include "helper.h"
  
  #include <iostream>
  
  #include <qpainter>
  
  #include <qtimer>
  
  
  
  class Helper;
  
  
  
  class GLWidget : public QOpenGLWidget, public FrameListener
  
  {
  
      Q_OBJECT
  
  
  
  public:
  
      GLWidget(std::string camId, CamUtils *cUtils, int width, int height, bool denyFullScreen_ = false, bool detectFlag_=false, QWidget* parent = nullptr);
  
      void killStream();
  
      ~GLWidget();
  
  
  
  public slots:
  
      void animate();
  
      void setBufferEnabled(bool setState);
  
      void setCameraRetryConnection(bool setState);
  
      void GLUpdate();            // Call to update the widget
  
      void onRightClickMenu(const QPoint&amp; point);
  
  
  
  protected:
  
      void paintEvent(QPaintEvent* event) override;
  
      void onPNewFrame(dPacket* frame);
  
      void onNotification(int alert_code);
  
  
  
  
  
  private:
  
      // Objects and resourses
  
      Helper* helper;
  
      Camera* cam;
  
      CamUtils* camUtils;
  
      QTimer* timer; // Keep track of update
  
      QPixmap lastImage;
  
      QMovie* connMov;
  
      QMovie* test;
  
  
  
      QPixmap logo;
  
  
  
      // Control fields
  
      int width;
  
      int height;
  
      int camUtilsAddr;
  
      int elapsed;
  
      std::thread* camThread;
  
      std::string camId;
  
      bool denyFullScreen = false;
  
      bool playing = true;
  
      bool streaming = true;
  
      bool debug = false;
  
      bool connecting = true;
  
      int lastFlag = 0;
  
  
  
  
  
      // Debug fields
  
      std::chrono::high_resolution_clock::time_point lastFrameAt;
  
      std::chrono::high_resolution_clock::time_point now;
  
      std::chrono::duration<double> painTime; // time took to draw last frame
  
  
  
      //Buffer stuff
  
      std::queue<qpixmap> buffer;
  
      bool bufferEnabled = false;
  
      bool initialBuffer = false;
  
      bool buffering = true;
  
      bool frameProcessing = false;
  
  
  
  
  
  
  
      //Functions
  
      QImage toQImageFromPMat(cv::Mat* inFrame);
  
      void mousePressEvent(QMouseEvent* event) override;
  
      void drawImageGLLatest(QPainter* painter, QPaintEvent* event, int elapsed);
  
      void drawOnPaused(QPainter* painter, QPaintEvent* event, int elapsed);
  
      void drawOnStatus(int statusFlag, QPainter* painter, QPaintEvent* event, int elapsed);
  
  };
  
  
  
  #endif
  
  
  
  </qpixmap></double></qtimer></qpainter></iostream></qmovie></ctime></chrono></qmouseevent></qopenglwidget>

  GLWidget.cpp :

  #include "glwidget.h"
  
  #include <future>
  
  
  
  
  
  FullScreenVideo* fullScreen;
  
  
  
  GLWidget::GLWidget(std::string camId_, CamUtils* cUtils, int width_, int height_,  bool denyFullScreen_, bool detectFlag_, QWidget* parent)
  
      : QOpenGLWidget(parent), helper(helper)
  
  {
  
      cout &lt;&lt; "Player for CAMERA " &lt;&lt; camId_ &lt;&lt; endl;
  
  
  
      /* Underlying properties */
  
      camUtils = cUtils;
  
      cout &lt;&lt; "GLWidget Incoming CamUtils addr " &lt;&lt; camUtils &lt;&lt; endl;
  
      cout &lt;&lt; "GLWidget Set CamUtils addr " &lt;&lt; camUtils &lt;&lt; endl;
  
      camId = camId_;
  
      elapsed = 0;
  
      width = width_ + 5;
  
      height = height_ + 5;
  
      helper = new Helper();
  
      setFixedSize(width, height);
  
      denyFullScreen = denyFullScreen_;
  
  
  
      /* Camera capture thread */
  
      cam = new Camera(camUtils->getCameraStreamURL(camId), width_, height_, detectFlag_);
  
      cam->addListener(this);
  
  
  
      /* Sync states */
  
      vector<bool> initState = cam->getState();
  
      playing = initState[0];
  
      streaming = initState[1];
  
      cout &lt;&lt; "Initial states: " &lt;&lt; playing &lt;&lt; " " &lt;&lt; streaming &lt;&lt; endl;
  
      camThread = new std::thread(&amp;Camera::stream, cam);
  
      cout &lt;&lt; "================================================" &lt;&lt; endl;
  
  
  
      // Right click set up
  
      setContextMenuPolicy(Qt::CustomContextMenu);
  
  
  
  
  
      /* Loading gif */
  
      connMov = new QMovie("establishingConnection.gif");
  
      connMov->start();
  
      QString url = R"(RLC-logo.png)";
  
      logo = QPixmap(url);
  
      QTimer* timer = new QTimer(this);
  
      connect(timer, SIGNAL(timeout()), this, SLOT(GLUpdate()));
  
      timer->start(1000/30);
  
      playing = true;
  
  
  
  }
  
  
  
  /* SYSTEM */
  
  void GLWidget::animate()
  
  {
  
      elapsed = (elapsed + qobject_cast(sender())->interval()) % 1000;
  
      std::cout &lt;&lt; elapsed &lt;&lt; "\n";
  
  }
  
  
  
  
  
  void GLWidget::GLUpdate() {
  
      /* Process descisions before update call */
  
      if (bufferEnabled) {
  
          /* Process buffer before update */
  
          now = chrono::high_resolution_clock::now();
  
          std::chrono::duration timeSinceLastUpdate = now - lastFrameAt;
  
          if (timeSinceLastUpdate.count() > 25) {
  
              if (buffer.size() > 1 &amp;&amp; playing) {
  
                  lastImage.swap(buffer.front());
  
                  buffer.pop();
  
                  lastFrameAt = chrono::high_resolution_clock::now();
  
              }
  
          }
  
          //update(); // Update
  
      }
  
      else {
  
          /* No buffer */
  
      }
  
      repaint();
  
  }
  
  
  
  
  
  /* EVENTS */
  
  void GLWidget::onRightClickMenu(const QPoint&amp; point) {
  
      cout &lt;&lt; "Right click request got" &lt;&lt; endl;
  
  
  
      QPoint globPos = this->mapToGlobal(point);
  
      QMenu myMenu;
  
  
  
      if (!denyFullScreen) {
  
          myMenu.addAction("Open Full Screen");
  
      }
  
      myMenu.addAction("Toggle Debug Info");
  
  
  
  
  
      QAction* selected = myMenu.exec(globPos);
  
  
  
      if (selected) {
  
          string optiontxt = selected->text().toStdString();
  
  
  
          if (optiontxt == "Open Full Screen") {
  
              cout &lt;&lt; "Chose to open full screen of " &lt;&lt; camId &lt;&lt; endl;
  
              fullScreen = new FullScreenVideo(bufferEnabled, this);
  
              fullScreen->setUpView(camUtils, camId);
  
              fullScreen->show();
  
              playing = false;
  
          }
  
  
  
          if (optiontxt == "Toggle Debug Info") {
  
              cout &lt;&lt; "Chose to toggle debug of " &lt;&lt; camId &lt;&lt; endl;
  
              debug = !debug;
  
          }
  
      }
  
      else {
  
          cout &lt;&lt; "Chose nothing!" &lt;&lt; endl;
  
      }
  
  
  
  
  
  }
  
  
  
  
  
  
  
  void GLWidget::onPNewFrame(dPacket* inPack) {
  
      lastFlag = 0;
  
  
  
      if (bufferEnabled) {
  
          buffer.push(QPixmap::fromImage(toQImageFromPMat(inPack->frame)));
  
      }
  
      else {
  
          if (playing) {
  
              /* Only process if this widget is playing */
  
              frameProcessing = true;
  
              lastImage.convertFromImage(toQImageFromPMat(inPack->frame));
  
              frameProcessing = false;
  
          }
  
      }
  
  
  
      if (lastFlag != -1 &amp;&amp; !lastImage.isNull()) {
  
          connecting = false;
  
      }
  
      else {
  
          connecting = true;
  
      }
  
  }
  
  
  
  
  
  void GLWidget::onNotification(int alert) {
  
      lastFlag = alert;   
  
  }
  
  
  
  
  
  /* Paint events*/
  
  
  
  
  
  void GLWidget::paintEvent(QPaintEvent* event)
  
  {
  
      QPainter painter(this);
  
  
  
          if (lastFlag != 0 || connecting) {
  
              drawOnStatus(lastFlag, &amp;painter, event, elapsed);
  
          }
  
          else {
  
  
  
              /* Actual frame drawing */
  
              if (playing) {
  
                  if (!frameProcessing) {
  
                      drawImageGLLatest(&amp;painter, event, elapsed);
  
                  }
  
              }
  
              else {
  
                  drawOnPaused(&amp;painter, event, elapsed);
  
              }
  
          }
  
      painter.end();
  
  
  
  }
  
  
  
  
  
  /* DRAWING STUFF */
  
  
  
  void GLWidget::drawOnStatus(int statusFlag, QPainter* bgPaint, QPaintEvent* event, int elapsed) {
  
  
  
      QString str;
  
      QFont font("times", 15);
  
      bgPaint->eraseRect(QRect(0, 0, width, height));
  
      if (!lastImage.isNull()) {
  
          bgPaint->drawPixmap(QRect(0, 0, width, height), lastImage);
  
      }
  
      /* Test background painting */
  
      if (connecting) {
  
          string k = "Connecting to " + camUtils->getIp(camId);
  
          str.append(k.c_str());
  
      }
  
      else {
  
          switch (statusFlag) {
  
          case 1:
  
              str = "Blank frame received...";
  
              break;
  
  
  
          case -1:
  
              if (cam->getReconnectable()) {
  
                  str = "Connection lost, will try to reconnect.";
  
                  bgPaint->setOpacity(0.3);
  
              }
  
              else {
  
                  str = "Connection lost...";
  
                  bgPaint->setOpacity(0.3);
  
              }
  
  
  
              break;
  
          }
  
      }
  
  
  
      bgPaint->drawPixmap(QRect(0, 0, width, height), QPixmap::fromImage(connMov->currentImage()));
  
      bgPaint->setPen(Qt::red);
  
      bgPaint->setFont(font);
  
      QFontMetrics fm(font);
  
      const QRect kek(0, 0, fm.width(str), fm.height());
  
      QRect bound;
  
      bgPaint->setOpacity(1);
  
      bgPaint->drawText(bgPaint->viewport().width()/2 - kek.width()/2, bgPaint->viewport().height()/2 - kek.height(), str);
  
  
  
      bgPaint->drawPixmap(bgPaint->viewport().width() / 2 - logo.width()/2, height - logo.width() - 15, logo);
  
  
  
  }
  
  
  
  
  
  
  
  void GLWidget::drawOnPaused(QPainter* painter, QPaintEvent* event, int elapsed) {
  
      painter->eraseRect(0, 0, width, height);
  
      QFont font = painter->font();
  
      font.setPointSize(18);
  
      painter->setPen(Qt::red);
  
      QFontMetrics fm(font);
  
      QString str("Paused");
  
      painter->drawPixmap(QRect(0, 0, width, height),lastImage);
  
      painter->drawText(QPoint(painter->viewport().width() - fm.width(str), 50), str);
  
  
  
      if (debug) {
  
          QFont font = painter->font();
  
          font.setPointSize(25);
  
          painter->setPen(Qt::red);
  
          string camMess = "CAMID: " + camId;
  
          QString mess(camMess.c_str());
  
          string camIp = "IP: " + camUtils->getIp(camId);
  
          QString ipMess(camIp.c_str());
  
          QString bufferSize("Buffer size: " + QString::number(buffer.size()));
  
          QString lastFrameText("Last frame draw time: " + QString::number(painTime.count()) + "s");
  
          painter->drawText(QPoint(10, 50), mess);
  
          painter->drawText(QPoint(10, 60), ipMess);
  
          QString bufferState;
  
          if (bufferEnabled) {
  
              bufferState = QString("Experimental BUFFER is enabled!");
  
              QString currentBufferSize("Current buffer load: " + QString::number(buffer.size()));
  
              painter->drawText(QPoint(10, 80), currentBufferSize);
  
          }
  
          else {
  
              bufferState = QString("Experimental BUFFER is disabled!");
  
          }
  
          painter->drawText(QPoint(10, 70), bufferState);
  
          painter->drawText(QPoint(10, height - 25), lastFrameText);
  
      }
  
  }
  
  
  
  
  
  void GLWidget::drawImageGLLatest(QPainter* painter, QPaintEvent* event, int elapsed) {
  
      auto start = chrono::high_resolution_clock::now();
  
      painter->drawPixmap(QRect(0, 0, width, height), lastImage);
  
      if (debug) {
  
          QFont font = painter->font();
  
          font.setPointSize(25);
  
          painter->setPen(Qt::red);
  
          string camMess = "CAMID: " + camId;
  
          QString mess(camMess.c_str());
  
          string camIp = "IP: " + camUtils->getIp(camId);
  
          QString ipMess(camIp.c_str());
  
          QString bufferSize("Buffer size: " + QString::number(buffer.size()));
  
          QString lastFrameText("Last frame draw time: " + QString::number(painTime.count()) + "s");
  
          painter->drawText(QPoint(10, 50), mess);
  
          painter->drawText(QPoint(10, 60), ipMess);
  
          QString bufferState;
  
          if(bufferEnabled){
  
              bufferState = QString("Experimental BUFFER is enabled!");
  
              QString currentBufferSize("Current buffer load: " + QString::number(buffer.size()));
  
              painter->drawText(QPoint(10,80), currentBufferSize);
  
          }
  
          else {
  
              bufferState = QString("Experimental BUFFER is disabled!");
  
              QString currentBufferSize("Current buffer load: " + QString::number(buffer.size()));
  
              painter->drawText(QPoint(10, 80), currentBufferSize);
  
          }
  
          painter->drawText(QPoint(10, 70), bufferState);
  
          painter->drawText(QPoint(10, height - 25), lastFrameText);
  
  
  
      }
  
      auto end = chrono::high_resolution_clock::now();
  
      painTime = end - start;
  
  }
  
  
  
  
  
  
  
  /* END DRAWING STUFF */
  
  
  
  
  
  
  
  /* UI EVENTS */
  
  
  
  void GLWidget::mousePressEvent(QMouseEvent* e) {
  
  
  
      if (e->button() == Qt::LeftButton) {
  
          if (fullScreen == nullptr || !fullScreen->isVisible()) { // Do not unpause if window is opened
  
              playing = !playing;
  
          }
  
      }
  
  
  
      if (e->button() == Qt::RightButton) {
  
          onRightClickMenu(e->pos());
  
      }
  
  }
  
  
  
  
  
  
  
  /* Utilities */
  
  QImage GLWidget::toQImageFromPMat(cv::Mat* mat) {
  
  
  
  
  
  
  
      return QImage(mat->data, mat->cols, mat->rows, QImage::Format_RGB888).rgbSwapped();
  
  
  
  
  
  
  
  }
  
  
  
  /* State control */
  
  
  
  void GLWidget::killStream() {
  
      cam->killStream();
  
      camThread->join();
  
  }
  
  
  
  void GLWidget::setBufferEnabled(bool newBufferState) {
  
      cout &lt;&lt; "Player: " &lt;&lt; camId &lt;&lt; ", buffer state updated: " &lt;&lt; newBufferState &lt;&lt; endl;
  
      bufferEnabled = newBufferState;
  
      buffer.empty();
  
  }
  
  
  
  void GLWidget::setCameraRetryConnection(bool newState) {
  
      cam->setReconnectable(newState);
  
  }
  
  
  
  /* Destruction */
  
  GLWidget::~GLWidget() {
  
      cam->killStream();
  
      camThread->join();
  
  }
  
  </bool></future>

  CamUtils.h :

  #pragma once
  
  #include <iostream>
  
  #include <vector>
  
  #include <fstream>
  
  #include <map>
  
  #include <string>
  
  #include <sstream>
  
  #include <algorithm>
  
  #include <nlohmann></nlohmann>json.hpp>
  
  
  
  using namespace std;
  
  using json = nlohmann::json;
  
  
  
  class CamUtils
  
  {
  
  private:
  
  
  
      string camDb = "cameras.dViewer";
  
      map> cameraList; // Legacy
  
      json cameras;
  
      ofstream dbFile;
  
      bool dbExists(); // Always hard coded
  
  
  
      /* Old IMPLEMENTATION */
  
      void writeLineToDb_(const string&amp; content, bool append = false);
  
      void loadCameras_();
  
  
  
      /* JSON based */
  
      void loadCameras();
  
  
  
  public:
  
      CamUtils();
  
      string generateRandomString(size_t length);
  
      string getCameraStreamURL(string cameraId) const;
  
      string saveCamera(string ip, string username, string pass); // Return generated id
  
      vector<string> listAllCameraIds();
  
      string getIp(string cameraId);
  
  };
  
  
  
  
  
  </string></algorithm></sstream></string></map></fstream></vector></iostream>

  CamUtils.cpp :

  #include "CamUtils.h"
  
  #pragma comment(lib, "rpcrt4.lib")  // UuidCreate - Minimum supported OS Win 2000
  
  #include 
  
  #include <iostream>
  
  
  
  CamUtils::CamUtils()
  
  {
  
      if (!dbExists()) {
  
          ofstream dbFile;
  
          dbFile.open(camDb);
  
          cameras["cameras"] = json::array();
  
          dbFile &lt;&lt; cameras &lt;&lt; std::endl;
  
          dbFile.close();
  
  
  
      }
  
      else {
  
          loadCameras();
  
      }
  
  }
  
  
  
  
  
  
  
  
  
  vector<string> CamUtils::listAllCameraIds() {
  
      vector<string> ids;
  
      cout &lt;&lt; "IN LIST " &lt;&lt; endl;
  
      for (auto&amp; cam : cameras["cameras"]) {
  
          ids.push_back(cam["id"].get<string>());
  
          //cout &lt;&lt; cam["id"].get<string>() &lt;&lt; std::endl;
  
      }
  
      return ids;
  
  }
  
  
  
  string CamUtils::getIp(string id) {
  
      vector<string> camDetails = cameraList[id];
  
      string ip = "NO IP WILL DISPLAYED UNTIL I FIGURE OUT A BUG";
  
      for (auto&amp; cam : cameras["cameras"]) {
  
          if (id == cam["id"]) {
  
              ip = cam["ip"].get<string>();
  
          }
  
      }
  
  
  
      return ip;
  
  }
  
  
  
  string CamUtils::getCameraStreamURL(string id) const {
  
      string url = "err"; // err is the default, it will be overwritten in case id is found, dont forget to check for it
  
  
  
      for (auto&amp; cam : cameras["cameras"]) {
  
          if (id == cam["id"]) {
  
              if (cam["username"].get<string>() == "null") {
  
                  url = "rtsp://" + cam["ip"].get<string>() + ":554/axis-media/media.amp?tcp";
  
              }
  
              else {
  
                  url = "rtsp://" + cam["username"].get<string>() + ":" + cam["password"].get<string>() + "@" + cam["ip"].get<string>() + ":554/axis-media/media.amp?streamprofile=720_30";
  
              }
  
          }
  
      }
  
  
  
      return url;  // Dont forget to check for err when using this shit
  
  }
  
  
  
  
  
  string CamUtils::saveCamera(string ip, string username, string password) {
  
      UUID uid;
  
      UuidCreate(&amp;uid);
  
      char* str;
  
      UuidToStringA(&amp;uid, (RPC_CSTR*)&amp;str);
  
      string id = str;
  
      cout &lt;&lt; "GEN: " &lt;&lt; id &lt;&lt; endl;
  
      json cam = json({}); //Create emtpy object
  
      cam["id"] = id;
  
      cam["ip"] = ip;
  
      cam["username"] = username;
  
      cam["password"] = password;
  
      cameras["cameras"].push_back(cam);
  
      std::ofstream out(camDb);
  
      out &lt;&lt; cameras &lt;&lt; std::endl;
  
      cout &lt;&lt; cameras["cameras"] &lt;&lt; endl;
  
  
  
      cout &lt;&lt; "Saved camera as " &lt;&lt; id &lt;&lt; endl;
  
      return id;
  
  }
  
  
  
  
  
  bool CamUtils::dbExists() {
  
      ifstream dbFile(camDb);
  
      return (bool)dbFile;
  
  }
  
  
  
  
  
  
  
  
  
  
  
  void CamUtils::loadCameras() {
  
      cout &lt;&lt; "Load call" &lt;&lt; endl;
  
      ifstream dbFile(camDb);
  
      string line;
  
      string wholeFile;
  
  
  
      while (std::getline(dbFile, line)) {
  
          cout &lt;&lt; line &lt;&lt; endl;
  
          wholeFile += line;
  
      }
  
      try {
  
          cameras = json::parse(wholeFile);
  
          //cout &lt;&lt; cameras["cameras"] &lt;&lt; endl;
  
  
  
      }
  
      catch (exception e) {
  
          cout &lt;&lt; e.what() &lt;&lt; endl;
  
      }
  
      dbFile.close();
  
  }
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  /*
  
      LEGACY CODE, TO BE REMOVED!
  
  
  
  */
  
  
  
  
  
  
  
  void CamUtils::loadCameras_() {
  
      /* 
  
          LEGACY CODE:
  
          This used to be the way to load cameras, but I moved on to JSON based configuration so this is no longer needed and will be removed soon
  
      */
  
  
  
      ifstream dbFile(camDb);
  
      string line;
  
      while (std::getline(dbFile, line)) {
  
          /*
  
              This function load camera data to the map:
  
              The order MUST be the following: 0:ID, 1:IP, 2:USERNAME, 3:PASSWORD.
  
              Always delimited with | no spaces between!
  
          */
  
          if (!line.empty()) {
  
              stringstream ss(line);
  
              string item;
  
              vector<string> splitString;
  
  
  
              while (std::getline(ss, item, '|')) {
  
                  splitString.push_back(item);
  
              }
  
              if (splitString.size() > 0) {
  
                  /* Dont even parse if the program didnt split right*/
  
                  //cout &lt;&lt; "Split string: " &lt;&lt; splitString.size() &lt;&lt; "\n";
  
                  for (int i = 0; i &lt; (splitString.size()); i++) cameraList[splitString[0]].push_back(splitString[i]);
  
              }
  
          }
  
      }
  
  }
  
  
  
  
  
  
  
  void CamUtils::writeLineToDb_(const string &amp; content, bool append) {
  
      ofstream dbFile;
  
      cout &lt;&lt; "Creating?";
  
      if (append) {
  
          dbFile.open(camDb, ios_base::app);
  
      }
  
      else {
  
          dbFile.open(camDb);
  
      }
  
  
  
      dbFile &lt;&lt; content.c_str() &lt;&lt; "\r\n";
  
      dbFile.flush();
  
  }
  
  
  
  /* JSON Reworx */
  
  
  
  
  
  
  
  
  
  string CamUtils::generateRandomString(size_t length)
  
  {
  
      const char* charmap = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
  
      const size_t charmapLength = strlen(charmap);
  
      auto generator = [&amp;]() { return charmap[rand() % charmapLength]; };
  
      string result;
  
      result.reserve(length);
  
      generate_n(back_inserter(result), length, generator);
  
      return result;
  
  }
  
  </string></string></string></string></string></string></string></string></string></string></string></string></iostream>

  End of example

  How would I go about decreasing CPU usage when dealing with large amount of streams ?

• Evolution #4347 (En cours) : Extraire la gestion des catégories de SPIP et SVP (action 1)

  11 juin 2019, par Eric Lupinacci

  Ce ticket est la partie SVP du ticket parent.
  Pour rappel :

  • supprimer les balises, filtres et globales associés aux catégories
  • certains autres filtres (comptage en particulier) ne sont utilisés que dans Plugins SPIP. Il convient de les déplacer dans le plugin idoine (Plugins SPIP ou Contrib à terme)
  • Supprimer le filtre catégorie dans le formulaire de recherche des plugins.