Recherche avancée

Sur d’autres sites (2631)

• ffmpeg h.246 plays locally in Safari, but not when hosted on s3 bucket

  7 juin 2018, par Simon Rogers

  ffmpeg h.246 plays locally in Safari, but not when hosted on s3 bucket.

  I thought it was therefore a problem with S3, however a friend has sent me an .mp4 of the same file converted with Zencoder’s service and this works perfectly, which surely means it must be a problem with my encoding settings in ffmpeg ?

  I’m using the settings recommended for maximum compatibility :

  ffmpeg -an -i mov-input-02.mov -vcodec libx264 -filter:v scale="1400:trunc(ow/a/2)*2" -movflags +faststart -pix_fmt yuv420p -profile:v baseline mov-output-02-1400.mp4

  Additionally, the .webm files I’m converting with ffmpeg all work perfectly in Chrome, Firefox, Opera etc.!

  I would really appreciate any thoughts.

  The video that works from Zencoder has this metadata :

  major_brand     : isom
  
  minor_version   : 1
  
  compatible_brands: isomavc1mp42
  
  creation_time   : 2018-06-01T11:24:54.000000Z
  
  Duration: 00:00:10.97, start: 0.000000, bitrate: 396 kb/s
  
  Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, bt709), 1800x1200 [SAR 1:1 DAR 3:2], 394 kb/s, 30 fps, 30 tbr, 30 tbn, 60 tbc (default)
  
  Metadata:
  
    creation_time   : 2018-06-01T11:24:49.000000Z

  While my videos from ffmpeg which don’t work have this metadata :

  Metadata:
  
  major_brand     : isom
  
  minor_version   : 512
  
  compatible_brands: isomiso2avc1mp41
  
  encoder         : Lavf58.12.100
  
  Duration: 00:00:10.97, start: 0.000000, bitrate: 184 kb/s
  
  Stream #0:0(eng): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p, 1400x932 [SAR 699:700 DAR 3:2], 182 kb/s, 30 fps, 30 tbr, 15360 tbn, 60 tbc (default)
  
  Metadata:
  
    handler_name    : VideoHandler
  
    timecode        : 00:00:00:01
  
  Stream #0:1(eng): Data: none (tmcd / 0x64636D74), 0 kb/s
  
  Metadata:
  
    handler_name    : TimeCodeHandler
  
    timecode        : 00:00:00:01
  
  Unsupported codec with id 0 for input stream 1

  Here’s the full output from conversion :

      Tempuras-iMac:2018.06.05 tempura$ ffmpeg -an -i mov-input-01.mov -vcodec l      Tempuras-iMac:2018.06.05 tempura$ ffmpeg -an -i mov-input-02.mov -vcodec libx264 -filter:v scale="1400:trunc(ow/a/2)*2" -movflags +faststart -pix_fmt yuv420p -profile:v baseline -level 3 mov-output-02-1400.mp4 
  
      ffmpeg version 4.0 Copyright (c) 2000-2018 the FFmpeg developers
  
        built with Apple LLVM version 8.1.0 (clang-802.0.42)
  
        configuration: --prefix=/usr/local/Cellar/ffmpeg/4.0 --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-gpl --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-opencl --enable-videotoolbox --disable-lzma
  
        libavutil      56. 14.100 / 56. 14.100
  
        libavcodec     58. 18.100 / 58. 18.100
  
        libavformat    58. 12.100 / 58. 12.100
  
        libavdevice    58.  3.100 / 58.  3.100
  
        libavfilter     7. 16.100 /  7. 16.100
  
        libavresample   4.  0.  0 /  4.  0.  0
  
        libswscale      5.  1.100 /  5.  1.100
  
        libswresample   3.  1.100 /  3.  1.100
  
        libpostproc    55.  1.100 / 55.  1.100
  
      Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'mov-input-02.mov':
  
        Metadata:
  
          major_brand     : qt  
  
          minor_version   : 537199360
  
          compatible_brands: qt  
  
          creation_time   : 2018-05-09T09:59:58.000000Z
  
        Duration: 00:00:10.97, start: 0.000000, bitrate: 114375 kb/s
  
          Stream #0:0(eng): Video: qtrle (rle  / 0x20656C72), rgb24(progressive), 2700x1800, 113610 kb/s, SAR 1:1 DAR 3:2, 30 fps, 30 tbr, 30 tbn, 30 tbc (default)
  
          Metadata:
  
            creation_time   : 2018-05-09T09:59:58.000000Z
  
            handler_name    : Apple Alias Data Handler
  
            encoder         : Animation
  
            timecode        : 00:00:00:01
  
          Stream #0:1(eng): Data: none (tmcd / 0x64636D74), 0 kb/s (default)
  
          Metadata:
  
            creation_time   : 2018-05-09T09:59:58.000000Z
  
            handler_name    : Apple Alias Data Handler
  
            timecode        : 00:00:00:01
  
      Stream mapping:
  
        Stream #0:0 -> #0:0 (qtrle (native) -> h264 (libx264))
  
      Press [q] to stop, [?] for help
  
      [libx264 @ 0x7fac39004200] using SAR=699/700
  
      [libx264 @ 0x7fac39004200] frame MB size (88x59) > level limit (1620)
  
      [libx264 @ 0x7fac39004200] MB rate (155760) > level limit (40500)
  
      [libx264 @ 0x7fac39004200] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
      [libx264 @ 0x7fac39004200] profile Constrained Baseline, level 3.0
  
      [libx264 @ 0x7fac39004200] 264 - core 152 r2854 e9a5903 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
      Output #0, mp4, to 'mov-output-02-1400.mp4':
  
        Metadata:
  
          major_brand     : qt  
  
          minor_version   : 537199360
  
          compatible_brands: qt  
  
          encoder         : Lavf58.12.100
  
          Stream #0:0(eng): Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 1400x932 [SAR 699:700 DAR 3:2], q=-1--1, 0.03 fps, 15360 tbn, 30 tbc (default)
  
          Metadata:
  
            creation_time   : 2018-05-09T09:59:58.000000Z
  
            handler_name    : Apple Alias Data Handler
  
            timecode        : 00:00:00:01
  
            encoder         : Lavc58.18.100 libx264
  
          Side data:
  
            cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
      [mp4 @ 0x7fac39003000] Starting second pass: moving the moov atom to the beginning of the file     
  
      frame=  329 fps= 42 q=-1.0 Lsize=     248kB time=00:00:10.93 bitrate= 185.5kbits/s speed= 1.4x    
  
      video:245kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 1.042892%
  
      [libx264 @ 0x7fac39004200] frame I:2     Avg QP:15.82  size: 34370
  
      [libx264 @ 0x7fac39004200] frame P:327   Avg QP:16.88  size:   555
  
      [libx264 @ 0x7fac39004200] mb I  I16..4: 76.8%  0.0% 23.2%
  
      [libx264 @ 0x7fac39004200] mb P  I16..4:  0.5%  0.0%  0.2%  P16..4:  0.7%  0.2%  0.1%  0.0%  0.0%    skip:98.3%
  
      [libx264 @ 0x7fac39004200] coded y,uvDC,uvAC intra: 14.3% 0.1% 0.1% inter: 0.2% 0.0% 0.0%
  
      [libx264 @ 0x7fac39004200] i16 v,h,dc,p: 57% 39%  3%  0%
  
      [libx264 @ 0x7fac39004200] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 41% 24% 20%  2%  3%  3%  2%  3%  1%
  
      [libx264 @ 0x7fac39004200] i8c dc,h,v,p: 100%  0%  0%  0%
  
      [libx264 @ 0x7fac39004200] kb/s:182.53 

• Ffmpeg video output is 0 seconds with correct filesize when uploading to google cloud bucket

  22 août 2022, par Turgut

  I've made a C++ program that lives in gke and takes some videos as input using ffmpeg, then does something with that input using opengl(not relevant), then finally encodes those edited videos as a single output. Normally the program works perfectly fine on my local machine, it encodes just as I want it to with no warnings or valgrind errors whatsoever. Then, after encoding the said video, I want my program to upload that video to the google cloud storage. This is where the problem comes, I have tried 2 methods for this : First, I tried using curl to upload to the cloud using a signed url. Second, I tried mounting the google storage using gcsfuse(I was already mounting the bucket to access the inputs in question). Both of those methods yielded undefined, weird behaviour's ranging from : Outputing a 0byte or 44byte file, (This is the most common one :) encoding in the correct file size 500mb but the video is 0 seconds long, outputing a 0.4 second video or just encoding the desired output normally (really rare).

  


  From the logs I can't see anything unusual, everything seems to work fine and ffmpeg does not give any errors or warnings, so does valgrind. Everything seems to work normally, even when I use curl to upload the video to the cloud the output is perfectly fine when it first encodes it (before sending it with curl) but the video gets messed up when curl uploads it to the cloud.

  


  I'm using the muxing.c example of ffmpeg to encode my video with the only difference being :

  


  void video_encoder::fill_yuv_image(AVFrame *frame, struct SwsContext *sws_context) {
    const int in_linesize[1] = { 4 * width };
    //uint8_t* dest[4] = { rgb_data, NULL, NULL, NULL };
    sws_context = sws_getContext(
            width, height, AV_PIX_FMT_RGBA,
            width, height, AV_PIX_FMT_YUV420P,
            SWS_BICUBIC, 0, 0, 0);

    sws_scale(sws_context, (const uint8_t * const *)&rgb_data, in_linesize, 0,
            height, frame->data, frame->linesize);
}


  


  rgb_data is the data I got after editing the inputs. Again, this works fine and I don't think there are any errors here.

  


  I'm not sure where the error is and since the code is huge I can't provide a replicable example. I'm just looking for someone to point me to the right direction.

  


  Running the cloud's output in mplayer wields this result (This is when the video is the right size but is 0 seconds long, the most common one.) :

  


  MPlayer 1.4 (Debian), built with gcc-11 (C) 2000-2019 MPlayer Team
do_connect: could not connect to socket
connect: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /media/c36c2633-d4ee-4d37-825f-88ae54b86100.
libavformat version 58.76.100 (external)
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x7f2cba1168e0]moov atom not found
LAVF_header: av_open_input_stream() failed
libavformat file format detected.
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x7f2cba1168e0]moov atom not found
LAVF_header: av_open_input_stream() failed
RAWDV file format detected.
VIDEO:  [DVSD]  720x480  24bpp  29.970 fps    0.0 kbps ( 0.0 kbyte/s)
X11 error: BadMatch (invalid parameter attributes)
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vdpau] Error when calling vdp_device_create_x11: 1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 58.134.100 (external)
[dvvideo @ 0x7f2cb987a380]Requested frame threading with a custom get_buffer2() implementation which is not marked as thread safe. This is not supported anymore, make your callback thread-safe.
Selected video codec: [ffdv] vfm: ffmpeg (FFmpeg DV)
==========================================================================
Load subtitles in /media/
==========================================================================
Opening audio decoder: [libdv] Raw DV Audio Decoder
Unknown/missing audio format -> no sound
ADecoder init failed :(
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
[dvaudio @ 0x7f2cb987a380]Decoder requires channel count but channels not set
Could not open codec.
ADecoder init failed :(
ADecoder init failed :(
Cannot find codec for audio format 0x56444152.
Audio: no sound
Starting playback...
[dvvideo @ 0x7f2cb987a380]could not find dv frame profile
Error while decoding frame!
[dvvideo @ 0x7f2cb987a380]could not find dv frame profile
Error while decoding frame!
V:   0.0   2/  2 ??% ??% ??,?% 0 0 


Exiting... (End of file)




  


  Edit : Since the code runs on a VM, I'm using xvfb-run ro start my application, but again even when using xvfb-run it works completely fine on when not encoding to the cloud.

  


• How to count variable in for loop in power shell

  17 avril 2020, par ilham zacky

  I am using powershell and i have got a for loop running each time 3 variables get printed, for now, loop runs 5 times. I need to get the count like $i++

  



  This is a part of my code

  



  $file = "D:\edl\input\CPExport.xlsx"
$sheetName = "Sheet1"
$objExcel = New-Object -ComObject Excel.Application
$workbook = $objExcel.Workbooks.Open($file)
$sheet = $workbook.Worksheets.Item($sheetName)
$objExcel.Visible = $false
$rowMax = ($sheet.UsedRange.Rows).count
$nu = 0
$rowcount = 000 

for ($i = 0; $i -le $rowMax - 1; $i++) {
    $id = $sheet.Cells.Item($rowName + $i, $colName).text
    $name = $sheet.Cells.Item($rowAge + $i, $colAge).text
    $subtitle = $sheet.Cells.Item($rowCity + $i, $colCity).text
    $jpgId = "$id.jpg"
    $videoId = "$id.mp4"
    $audioId = "$id.m4a"
    $duration1 = if ((ffmpeg -i $audioId 2>&1 | Out-String) -match 'Duration:\s+([\d:"."]+)') { $matches[1] };
    $duration2 = if ((ffmpeg -i $jpgId 2>&1 | Out-String) -match 'Duration:\s+([\d:"."]+)') { $matches[1] };
    $duration = if ((ffmpeg -i $videoId 2>&1 | Out-String) -match 'Duration:\s+([\d:"."]+)') { $matches[1] };

    $newduration = ("$duration").Replace(".", ":")
    $newduration1 = ("$duration1").Replace(".", ":")
    $newduration2 = ("$duration2").Replace(".", ":")

    $out1 = ""
    $out2 = ""
    $out = ""
    $nu++
    $rowcount++
    if ($newduration1) {

        if ($nu -eq 1) {
            $audioA = "00:00:00:00"
        }

        $audioB = Add-Frame -Base $newduration1 -Offset $audioA
        $out1 = "$rowcount" + "  " + "AX" + "   " + "AA" + "     " + "C" + "   " + "00:00:00:00" + " " + $newduration1 + "   " + $audioA 
    }

    if ($newduration2) {

        $imagecal = Add-Frame -Base $imageA -Offset "00:00:06:00"
        $imageB = $imagecal
        $out = "$rowcount" + "  " + "AX" + "   " + "V" + "      " + "C" + "   " + "02:00:05:15" + " " + $newduration2 + "   " + " " + $imageA 
    }


    if ($newduration) {

        $videoA = $imageB
        $videocal = Add-Frame -Base $newduration -Offset $videoA
        $videoB = $videocal
        $out2 = "$rowcount" + "  " + "AX" + "   " + "AA/V" + "   " + "C" + "   " + "00:00:00:00" + " " + $hh + "   " + " " + $videoA 
    }
    else {
        $videoB = ""
    }
    $gg = $out1 + "`n" + "`n" + $out + "`n" + "`n" + $out2 + "`n"
    echo $gg

    $gg | Out-File -FilePath d:\edl\input\output.txt -Append
}
#close excel file
$objExcel.quit()


  



  i have echo $gg
this is the output

  



  1 AX   AA     C   00:00:00:00 00:00:03:48   
1  AX   V      C   02:00:05:15 02:00:11:15
1  AX   AA/V   C   00:00:00:00 00:00:06:93 
2  AX   AA     C   00:00:00:00 00:00:03:46   
2  AX   V      C   02:00:05:15 02:00:11:15    
2  AX   AA     C   00:00:00:00 00:00:03:46  
3  AX   AA     C   00:00:00:00 00:00:03:52   
3  AX   V      C   02:00:05:15 02:00:11:15   
3  AX   AA/V   C   00:00:00:00 00:00:06:93    
4  AX   AA     C   00:00:00:00 00:00:03:21   
4  AX   V      C   02:00:05:15 02:00:11:15    
4  AX   AA     C   00:00:00:00 00:00:03:21   
5  AX   AA     C   00:00:00:00 00:00:03:05   
5  AX   V      C   02:00:05:15 02:00:11:15    
5  AX   AA/V   C   00:00:00:00 00:00:06:93    


  



  Output prints only 1-5 
I need it to be printed 1 - 15

  



  any suggestions ?

  



  thank you for reading