Recherche avancée

Sur d’autres sites (10669)

• Monster Battery Power Revisited

  28 mai 2010, par Multimedia Mike — Python, Science Projects

  So I have this new fat netbook battery and I performed an experiment to determine how long it really lasts. In my last post on the matter, it was suggested that I should rely on the information that gnome-power-manager is giving me. However, I have rarely seen GPM report more than about 2 hours of charge ; even on a full battery, it only reports 3h25m when I profiled it as lasting over 5 hours in my typical use. So I started digging to understand how GPM gets its numbers and determine if, perhaps, it’s not getting accurate data from the system.

  I started poking around /proc for the data I wanted. You can learn a lot in /proc as long as you know the right question to ask. I had to remember what the power subsystem is called — ACPI — and this led me to /proc/acpi/battery/BAT0/state which has data such as :

  present :                 yes
  capacity state :          ok
  charging state :          charged
  present rate :            unknown
  remaining capacity :      100 mAh
  present voltage :         8326 mV
  

  "Remaining capacity" rated in mAh is a little odd ; I would later determine that this should actually be expressed as a percentage (i.e., 100% charge at the time of this reading). Examining the GPM source code, it seems to determine as a function of the current CPU load (queried via /proc/stat) and the battery state queried via a facility called devicekit. I couldn’t immediately find any source code to the latter but I was able to install a utility called ’devkit-power’. Mostly, it appears to rehash data already found in the above /proc file.

  Curiously, the file /proc/acpi/battery/BAT0/info, which displays essential information about the battery, reports the design capacity of my battery as only 4400 mAh which is true for the original battery ; the new monster battery is supposed to be 10400 mAh. I can imagine that all of these data points could be conspiring to under-report my remaining battery life.

  Science project : Repeat the previous power-related science project but also parse and track the remaining capacity and present voltage fields from the battery state proc file.

  Let’s skip straight to the results (which are consistent with my last set of results in terms of longevity) :

  
  
  

  So there is definitely something strange going on with the reporting— the 4400 mAh battery reports discharge at a linear rate while the 10400 mAh battery reports precipitous dropoff after 60%.

  Another curious item is that my script broke at first when there was 20% power remaining which, as you can imagine, is a really annoying time to discover such a bug. At that point, the "time to empty" reported by devkit-power jumped from 0 seconds to 20 hours (the first state change observed for that field).

  Here’s my script, this time elevated from Bash script to Python. It requires xdotool and devkit-power to be installed (both should be available in the package manager for a distro).
  

  PLAIN TEXT

  PYTHON :

  1. # !/usr/bin/python
  2.  
  3. import commands
  4. import random
  5. import sys
  6. import time
  7.  
  8. XDOTOOL = "/usr/bin/xdotool"
  9. BATTERY_STATE = "/proc/acpi/battery/BAT0/state"
  10. DEVKIT_POWER = "/usr/bin/devkit-power -i /org/freedesktop/DeviceKit/Power/devices/battery_BAT0"
  11.  
  12. print "count, unixtime, proc_remaining_capacity, proc_present_voltage, devkit_percentage, devkit_voltage"
  13.  
  14. count = 0
  15. while 1 :
  16.   commands.getstatusoutput("%s mousemove %d %d" % (XDOTOOL, random.randrange(0,800), random.randrange(0, 480)))
  17.   battery_state = open(BATTERY_STATE).read().splitlines()
  18.   for line in battery_state :
  19.     if line.startswith("remaining capacity :") :
  20.       proc_remaining_capacity = int(line.lstrip("remaining capacity : ").rstrip("mAh"))
  21.     elif line.startswith("present voltage :") :
  22.       proc_present_voltage = int(line.lstrip("present voltage : ").rstrip("mV"))
  23.   devkit_state = commands.getoutput(DEVKIT_POWER).splitlines()
  24.   for line in devkit_state :
  25.     line = line.strip()
  26.     if line.startswith("percentage :") :
  27.       devkit_percentage = int(line.lstrip("percentage :").rstrip(’\%’))
  28.     elif line.startswith("voltage :") :
  29.       devkit_voltage = float(line.lstrip("voltage :").rstrip(’V’)) * 1000
  30.   print "%d, %d, %d, %d, %d, %d" % (count, time.time(), proc_remaining_capacity, proc_present_voltage, devkit_percentage, devkit_voltage)
  31.   sys.stdout.flush()
  32.   time.sleep(60)
  33.   count += 1

• Save video using opencv with H264 codec

  31 octobre 2023, par ldiaz997

  This is beyond me and I don't know what I'm doing wrong. I have read that in order to have my video in h265 codec, I need to build opencv from source. Well, I did that, and I also did it for ffmpeg Docker ffmpeg Compiler. But I'm trying to run my application using docker, and I still can't get over the error :

  


  [ERROR:0@93.327] global cap_ffmpeg_impl.hpp:3018 open Could not find encoder for codec_id=27, error: Encoder not found
[ERROR:0@93.327] global cap_ffmpeg_impl.hpp:3093 open VIDEOIO/FFMPEG: Failed to initialize VideoWriter


  


  Dockerfile :

  


  FROM python:3.10.12-slim-buster

RUN apt-get update

# Set the working directory in the container
WORKDIR /app

# Copy the application code into the container
COPY . .

# Set ffmpeg and ffprobe binary files
RUN mv ffmpeg /usr/local/bin
RUN mv ffprobe /usr/local/bin

# Build opencv from source, to be able to use h264 codec.
RUN apt-get install -y cmake \
    gcc \
    g++ \
    python3-numpy \
    libavcodec-dev \
    libavformat-dev \
    libswscale-dev \
    libgstreamer-plugins-base1.0-dev \
    libgstreamer1.0-dev \
    libpng-dev \
    libjpeg-dev \
    libopenexr-dev \
    libtiff-dev \
    libwebp-dev \
    git

RUN git clone --depth 1 --branch 4.8.0 https://github.com/opencv/opencv.git && \
    git clone --depth 1 --branch 4.8.0 https://github.com/opencv/opencv_contrib.git && \
    cd opencv && \
    mkdir build && \
    cd build && \
    cmake -D OPENCV_EXTRA_MODULES_PATH=/app/opencv_contrib/modules ../ && \
    make -j"$(nproc)" && \
    make install

# Remove opencv github project
RUN rm -r opencv

# Remove opencv_contrib github project
RUN rm -r opencv_contrib

# Prevents Python from writing pyc files to disc
ENV PYTHONDONTWRITEBYTECODE 1

# Prevents Python from buffering stdout and stderr
ENV PYTHONUNBUFFERED 1

# Install python dependencies
RUN pip install --upgrade pip
RUN pip install --no-cache-dir -r requirements.txt

# Install netcat to know when rabbitmq is running
RUN apt-get install -y netcat

# Set execute permissions
RUN chmod +x entrypoint.sh
RUN chmod +x web_start.sh

ENTRYPOINT ["./entrypoint.sh"]


  


  I ran the command ./ffmpeg -i 57b3e3a7-ad22-469d-a7ff-cf76ba780664 -vcodec libx264 -acodec aac output.mp4 to test ffmpeg and this was the result.

  


  ffmpeg version N-112515-gba6a5e7a3d Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.12) 20160609
  configuration: --prefix=/root/ffmpeg_build --pkg-config-flags=--static --extra-libs=-static --extra-cflags=--static --extra-cflags=-I/root/ffmpeg_build/include --extra-ldflags=-L/root/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/root/bin --enable-gpl --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-nonfree
  libavutil      58. 27.100 / 58. 27.100
  libavcodec     60. 30.102 / 60. 30.102
  libavformat    60. 15.101 / 60. 15.101
  libavdevice    60.  2.101 / 60.  2.101
  libavfilter     9. 11.100 /  9. 11.100
  libswscale      7.  4.100 /  7.  4.100
  libswresample   4. 11.100 /  4. 11.100
  libpostproc    57.  2.100 / 57.  2.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '57b3e3a7-ad22-469d-a7ff-cf76ba780664':
  Metadata:
    major_brand     : qt  
    minor_version   : 0
    compatible_brands: qt  
    creation_time   : 2023-10-30T15:34:32.000000Z
    com.apple.quicktime.make: Apple
    com.apple.quicktime.model: iPhone 13 Pro Max
    com.apple.quicktime.software: 16.6
    com.apple.quicktime.creationdate: 2023-10-30T11:34:32-0400
  Duration: 00:00:03.60, start: 0.000000, bitrate: 16264 kb/s
  Stream #0:0[0x1](und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709, progressive), 1920x1080, 16120 kb/s, 29.99 fps, 29.97 tbr, 600 tbn (default)
    Metadata:
      creation_time   : 2023-10-30T15:34:32.000000Z
      handler_name    : Core Media Video
      vendor_id       : [0][0][0][0]
      encoder         : H.264
    Side data:
      displaymatrix: rotation of -90.00 degrees
  Stream #0:1[0x2](und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 89 kb/s (default)
    Metadata:
      creation_time   : 2023-10-30T15:34:32.000000Z
      handler_name    : Core Media Audio
      vendor_id       : [0][0][0][0]
  Stream #0:2[0x3](und): Data: none (mebx / 0x7862656D), 0 kb/s (default)
    Metadata:
      creation_time   : 2023-10-30T15:34:32.000000Z
      handler_name    : Core Media Metadata
  Stream #0:3[0x4](und): Data: none (mebx / 0x7862656D), 0 kb/s (default)
    Metadata:
      creation_time   : 2023-10-30T15:34:32.000000Z
      handler_name    : Core Media Metadata
  Stream #0:4[0x5](und): Data: none (mebx / 0x7862656D), 34 kb/s (default)
    Metadata:
      creation_time   : 2023-10-30T15:34:32.000000Z
      handler_name    : Core Media Metadata
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
[libx264 @ 0x5ae4c00] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
[libx264 @ 0x5ae4c00] profile High, level 4.0
[libx264 @ 0x5ae4c00] 264 - core 148 r2643 5c65704 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=30 lookahead_threads=5 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'output.mp4':
  Metadata:
    major_brand     : qt  
    minor_version   : 0
    compatible_brands: qt  
    com.apple.quicktime.creationdate: 2023-10-30T11:34:32-0400
    com.apple.quicktime.make: Apple
    com.apple.quicktime.model: iPhone 13 Pro Max
    com.apple.quicktime.software: 16.6
    encoder         : Lavf60.15.101
  Stream #0:0(und): Video: h264 (avc1 / 0x31637661), yuv420p(tv, bt709, progressive), 1080x1920, q=2-31, 29.97 fps, 30k tbn (default)
    Metadata:
      creation_time   : 2023-10-30T15:34:32.000000Z
      handler_name    : Core Media Video
      vendor_id       : [0][0][0][0]
      encoder         : Lavc60.30.102 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
      displaymatrix: rotation of -0.00 degrees
  Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 69 kb/s (default)
    Metadata:
      creation_time   : 2023-10-30T15:34:32.000000Z
      handler_name    : Core Media Audio
      vendor_id       : [0][0][0][0]
      encoder         : Lavc60.30.102 aac
[out#0/mp4 @ 0x5ae3440] video:2773kB audio:31kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.157082%
frame=  108 fps= 74 q=-1.0 Lsize=    2809kB time=00:00:03.59 bitrate=6393.3kbits/s speed=2.47x    
[libx264 @ 0x5ae4c00] frame I:4     Avg QP:22.27  size: 48408
[libx264 @ 0x5ae4c00] frame P:104   Avg QP:24.58  size: 25440
[libx264 @ 0x5ae4c00] mb I  I16..4: 10.3% 82.9%  6.8%
[libx264 @ 0x5ae4c00] mb P  I16..4:  4.6% 18.1%  0.8%  P16..4: 40.3%  6.9%  4.1%  0.0%  0.0%    skip:25.3%
[libx264 @ 0x5ae4c00] 8x8 transform intra:78.0% inter:85.0%
[libx264 @ 0x5ae4c00] coded y,uvDC,uvAC intra: 44.9% 29.1% 0.1% inter: 22.5% 23.3% 0.0%
[libx264 @ 0x5ae4c00] i16 v,h,dc,p: 17% 49% 14% 19%
[libx264 @ 0x5ae4c00] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 25% 37%  3%  3%  5%  3%  2%  4%
[libx264 @ 0x5ae4c00] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 29% 30% 17%  3%  4%  8%  3%  2%  3%
[libx264 @ 0x5ae4c00] i8c dc,h,v,p: 67% 20% 12%  0%
[libx264 @ 0x5ae4c00] Weighted P-Frames: Y:1.9% UV:0.0%
[libx264 @ 0x5ae4c00] ref P L0: 61.8% 10.4% 18.3%  9.4%  0.2%
[libx264 @ 0x5ae4c00] kb/s:6303.40
[aac @ 0x68c9880] Qavg: 119.986


  


  The resulting video had an h264 codec. In my opinion, the problem is in opencv. Basically this is what I do in my python code :

  


  cap = cv2.VideoCapture(video)
shoot_frames = []
while True:
    ret, img = cap.read()
    if not ret:
       break
    if some_condition:
       shoot_frames.append(img)
    if len(shoot_frames) > 41:
       out1 = cv2.VideoWriter(upload_path(name , dir), cv2.VideoWriter_fourcc(*'avc1'), int(fps), (int(width), int(height)), True)
       for shoot_frame in shoot_frames:
           out1.write(shoot_frame)
       out1.release()
       shoot_frames = []


  


  Output from print(cv2.getBuildInformation()) :

  


  General configuration for OpenCV 4.8.1 =====================================
  Version control:               4.8.1-dirty

  Platform:
    Timestamp:                   2023-09-27T14:20:56Z
    Host:                        Linux 5.15.0-1046-azure x86_64
    CMake:                       3.27.5
    CMake generator:             Unix Makefiles
    CMake build tool:            /bin/gmake
    Configuration:               Release

  CPU/HW features:
    Baseline:                    SSE SSE2 SSE3
      requested:                 SSE3
    Dispatched code generation:  SSE4_1 SSE4_2 FP16 AVX AVX2 AVX512_SKX
      requested:                 SSE4_1 SSE4_2 AVX FP16 AVX2 AVX512_SKX
      SSE4_1 (16 files):         + SSSE3 SSE4_1
      SSE4_2 (1 files):          + SSSE3 SSE4_1 POPCNT SSE4_2
      FP16 (0 files):            + SSSE3 SSE4_1 POPCNT SSE4_2 FP16 AVX
      AVX (7 files):             + SSSE3 SSE4_1 POPCNT SSE4_2 AVX
      AVX2 (35 files):           + SSSE3 SSE4_1 POPCNT SSE4_2 FP16 FMA3 AVX AVX2
      AVX512_SKX (5 files):      + SSSE3 SSE4_1 POPCNT SSE4_2 FP16 FMA3 AVX AVX2 AVX_512F AVX512_COMMON AVX512_SKX

  C/C++:
    Built as dynamic libs?:      NO
    C++ standard:                11
    C++ Compiler:                /opt/rh/devtoolset-10/root/usr/bin/c++  (ver 10.2.1)
    C++ flags (Release):         -Wl,-strip-all   -fsigned-char -W -Wall -Wreturn-type -Wnon-virtual-dtor -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wundef -Winit-self -Wpointer-arith -Wshadow -Wsign-promo -Wuninitialized -Wsuggest-override -Wno-delete-non-virtual-dtor -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections  -msse -msse2 -msse3 -fvisibility=hidden -fvisibility-inlines-hidden -O3 -DNDEBUG  -DNDEBUG
    C++ flags (Debug):           -Wl,-strip-all   -fsigned-char -W -Wall -Wreturn-type -Wnon-virtual-dtor -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wundef -Winit-self -Wpointer-arith -Wshadow -Wsign-promo -Wuninitialized -Wsuggest-override -Wno-delete-non-virtual-dtor -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections  -msse -msse2 -msse3 -fvisibility=hidden -fvisibility-inlines-hidden -g  -O0 -DDEBUG -D_DEBUG
    C Compiler:                  /opt/rh/devtoolset-10/root/usr/bin/cc
    C flags (Release):           -Wl,-strip-all   -fsigned-char -W -Wall -Wreturn-type -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wundef -Winit-self -Wpointer-arith -Wshadow -Wuninitialized -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections  -msse -msse2 -msse3 -fvisibility=hidden -O3 -DNDEBUG  -DNDEBUG
    C flags (Debug):             -Wl,-strip-all   -fsigned-char -W -Wall -Wreturn-type -Waddress -Wsequence-point -Wformat -Wformat-security -Wmissing-declarations -Wmissing-prototypes -Wstrict-prototypes -Wundef -Winit-self -Wpointer-arith -Wshadow -Wuninitialized -Wno-comment -Wimplicit-fallthrough=3 -Wno-strict-overflow -fdiagnostics-show-option -Wno-long-long -pthread -fomit-frame-pointer -ffunction-sections -fdata-sections  -msse -msse2 -msse3 -fvisibility=hidden -g  -O0 -DDEBUG -D_DEBUG
    Linker flags (Release):      -Wl,--exclude-libs,libippicv.a -Wl,--exclude-libs,libippiw.a -L/ffmpeg_build/lib  -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined  
    Linker flags (Debug):        -Wl,--exclude-libs,libippicv.a -Wl,--exclude-libs,libippiw.a -L/ffmpeg_build/lib  -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined  
    ccache:                      YES
    Precompiled headers:         NO
    Extra dependencies:          /lib64/libopenblas.so Qt5::Core Qt5::Gui Qt5::Widgets Qt5::Test Qt5::Concurrent /usr/local/lib/libpng.so /lib64/libz.so dl m pthread rt
    3rdparty dependencies:       libprotobuf ade ittnotify libjpeg-turbo libwebp libtiff libopenjp2 IlmImf quirc ippiw ippicv

  OpenCV modules:
    To be built:                 calib3d core dnn features2d flann gapi highgui imgcodecs imgproc ml objdetect photo python3 stitching video videoio
    Disabled:                    world
    Disabled by dependency:      -
    Unavailable:                 java python2 ts
    Applications:                -
    Documentation:               NO
    Non-free algorithms:         NO

  GUI:                           QT5
    QT:                          YES (ver 5.15.0 )
      QT OpenGL support:         NO
    GTK+:                        NO
    VTK support:                 NO

  Media I/O: 
    ZLib:                        /lib64/libz.so (ver 1.2.7)
    JPEG:                        libjpeg-turbo (ver 2.1.3-62)
    WEBP:                        build (ver encoder: 0x020f)
    PNG:                         /usr/local/lib/libpng.so (ver 1.6.40)
    TIFF:                        build (ver 42 - 4.2.0)
    JPEG 2000:                   build (ver 2.5.0)
    OpenEXR:                     build (ver 2.3.0)
    HDR:                         YES
    SUNRASTER:                   YES
    PXM:                         YES
    PFM:                         YES

  Video I/O:
    DC1394:                      NO
    FFMPEG:                      YES
      avcodec:                   YES (59.37.100)
      avformat:                  YES (59.27.100)
      avutil:                    YES (57.28.100)
      swscale:                   YES (6.7.100)
      avresample:                NO
    GStreamer:                   NO
    v4l/v4l2:                    YES (linux/videodev2.h)

  Parallel framework:            pthreads

  Trace:                         YES (with Intel ITT)

  Other third-party libraries:
    Intel IPP:                   2021.8 [2021.8.0]
           at:                   /io/_skbuild/linux-x86_64-3.7/cmake-build/3rdparty/ippicv/ippicv_lnx/icv
    Intel IPP IW:                sources (2021.8.0)
              at:                /io/_skbuild/linux-x86_64-3.7/cmake-build/3rdparty/ippicv/ippicv_lnx/iw
    VA:                          NO
    Lapack:                      YES (/lib64/libopenblas.so)
    Eigen:                       NO
    Custom HAL:                  NO
    Protobuf:                    build (3.19.1)
    Flatbuffers:                 builtin/3rdparty (23.5.9)

  OpenCL:                        YES (no extra features)
    Include path:                /io/opencv/3rdparty/include/opencl/1.2
    Link libraries:              Dynamic load

  Python 3:
    Interpreter:                 /opt/python/cp37-cp37m/bin/python3.7 (ver 3.7.17)
    Libraries:                   libpython3.7m.a (ver 3.7.17)
    numpy:                       /home/ci/.local/lib/python3.7/site-packages/numpy/core/include (ver 1.17.0)
    install path:                python/cv2/python-3

  Python (for build):            /opt/python/cp37-cp37m/bin/python3.7

  Java:                          
    ant:                         NO
    Java:                        NO
    JNI:                         NO
    Java wrappers:               NO
    Java tests:                  NO

  Install to:                    /io/_skbuild/linux-x86_64-3.7/cmake-install
-----------------------------------------------------------------




  


  Update

  


  I made my docker image more simpler, and therefore my question. Install ffmpeg from the repository :

  


  FROM python:3.10.12-slim-buster

RUN apt-get update

# Set the working directory in the container
WORKDIR /app

# Install ffmpeg for opencv
RUN apt-get install -y ffmpeg

# Copy the application code into the container
COPY . .

# Build opencv from source, to be able to use h264 codec.
RUN apt-get install -y cmake \
    gcc \
    g++ \
    python3-numpy \
    libavcodec-dev \
    libavformat-dev \
    libswscale-dev \
    libgstreamer-plugins-base1.0-dev \
    libgstreamer1.0-dev \
    libpng-dev \
    libjpeg-dev \
    libopenexr-dev \
    libtiff-dev \
    libwebp-dev \
    git

RUN git clone --depth 1 --branch 4.8.0 https://github.com/opencv/opencv.git && \
    git clone --depth 1 --branch 4.8.0 https://github.com/opencv/opencv_contrib.git && \
    cd opencv && \
    mkdir build && \
    cd build && \
    cmake -D CMAKE_BUILD_TYPE=Release -D OPENCV_EXTRA_MODULES_PATH=/app/opencv_contrib/modules -D OPENCV_ENABLE_NONFREE=ON ../ && \
    make -j"$(nproc)" && \
    make install

# Remove opencv github project
RUN rm -r opencv

# Remove opencv_contrib github project
RUN rm -r opencv_contrib

# Prevents Python from writing pyc files to disc
ENV PYTHONDONTWRITEBYTECODE 1

# Prevents Python from buffering stdout and stderr
ENV PYTHONUNBUFFERED 1

# Install python dependencies
RUN pip install --upgrade pip
RUN pip install --no-cache-dir -r requirements.txt

# Install netcat to know when rabbitmq is running
RUN apt-get install -y netcat

# Set execute permissions
RUN chmod +x entrypoint.sh
RUN chmod +x web_start.sh

ENTRYPOINT ["./entrypoint.sh"]


  


  Run the following commands inside the docker container :

  


  $ ffmpeg -version

ffmpeg version 4.1.11-0+deb10u1 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 8 (Debian 8.3.0-6)
configuration: --prefix=/usr --extra-version=0+deb10u1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
libavutil      56. 22.100 / 56. 22.100
libavcodec     58. 35.100 / 58. 35.100
libavformat    58. 20.100 / 58. 20.100
libavdevice    58.  5.100 / 58.  5.100
libavfilter     7. 40.101 /  7. 40.101
libavresample   4.  0.  0 /  4.  0.  0
libswscale      5.  3.100 /  5.  3.100
libswresample   3.  3.100 /  3.  3.100
libpostproc    55.  3.100 / 55.  3.100


  


  $ ffmpeg -i cf91f302-c357-49ba-b59c-bcfb8b7f4866 -vcodec libx264 -f mp4 output.mp4

ffmpeg version 4.1.11-0+deb10u1 Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 8 (Debian 8.3.0-6)
  configuration: --prefix=/usr --extra-version=0+deb10u1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 22.100 / 56. 22.100
  libavcodec     58. 35.100 / 58. 35.100
  libavformat    58. 20.100 / 58. 20.100
  libavdevice    58.  5.100 / 58.  5.100
  libavfilter     7. 40.101 /  7. 40.101
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  3.100 /  5.  3.100
  libswresample   3.  3.100 /  3.  3.100
  libpostproc    55.  3.100 / 55.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'cf91f302-c357-49ba-b59c-bcfb8b7f4866':
  Metadata:
    major_brand     : qt  
    minor_version   : 0
    compatible_brands: qt  
    creation_time   : 2023-10-31T10:38:42.000000Z
    com.apple.quicktime.make: Apple
    com.apple.quicktime.model: iPhone 13 Pro Max
    com.apple.quicktime.software: 16.6
    com.apple.quicktime.creationdate: 2023-10-31T06:38:42-0400
  Duration: 00:00:04.23, start: 0.000000, bitrate: 15915 kb/s
    Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709), 1920x1080, 15767 kb/s, 30 fps, 30 tbr, 600 tbn, 1200 tbc (default)
    Metadata:
      rotate          : 90
      creation_time   : 2023-10-31T10:38:42.000000Z
      handler_name    : Core Media Video
      encoder         : H.264
    Side data:
      displaymatrix: rotation of -90.00 degrees
    Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 89 kb/s (default)
    Metadata:
      creation_time   : 2023-10-31T10:38:42.000000Z
      handler_name    : Core Media Audio
    Stream #0:2(und): Data: none (mebx / 0x7862656D), 0 kb/s (default)
    Metadata:
      creation_time   : 2023-10-31T10:38:42.000000Z
      handler_name    : Core Media Metadata
    Stream #0:3(und): Data: none (mebx / 0x7862656D), 0 kb/s (default)
    Metadata:
      creation_time   : 2023-10-31T10:38:42.000000Z
      handler_name    : Core Media Metadata
    Stream #0:4(und): Data: none (mebx / 0x7862656D), 34 kb/s (default)
    Metadata:
      creation_time   : 2023-10-31T10:38:42.000000Z
      handler_name    : Core Media Metadata
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
Press [q] to stop, [?] for help
[libx264 @ 0x55db965ee980] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x55db965ee980] profile High, level 4.0
[libx264 @ 0x55db965ee980] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'output.mp4':
  Metadata:
    major_brand     : qt  
    minor_version   : 0
    compatible_brands: qt  
    com.apple.quicktime.creationdate: 2023-10-31T06:38:42-0400
    com.apple.quicktime.make: Apple
    com.apple.quicktime.model: iPhone 13 Pro Max
    com.apple.quicktime.software: 16.6
    encoder         : Lavf58.20.100
    Stream #0:0(und): Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 1080x1920, q=-1--1, 30 fps, 15360 tbn, 30 tbc (default)
    Metadata:
      encoder         : Lavc58.35.100 libx264
      creation_time   : 2023-10-31T10:38:42.000000Z
      handler_name    : Core Media Video
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
      displaymatrix: rotation of -0.00 degrees
    Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, mono, fltp, 69 kb/s (default)
    Metadata:
      creation_time   : 2023-10-31T10:38:42.000000Z
      handler_name    : Core Media Audio
      encoder         : Lavc58.35.100 aac
frame=  127 fps= 27 q=-1.0 Lsize=    2005kB time=00:00:04.24 bitrate=3866.2kbits/s speed=0.909x    
video:1964kB audio:36kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.282549%
[libx264 @ 0x55db965ee980] frame I:1     Avg QP:21.43  size: 36791
[libx264 @ 0x55db965ee980] frame P:59    Avg QP:23.61  size: 22380
[libx264 @ 0x55db965ee980] frame B:67    Avg QP:24.20  size:  9743
[libx264 @ 0x55db965ee980] consecutive B-frames: 20.5% 22.0% 16.5% 40.9%
[libx264 @ 0x55db965ee980] mb I  I16..4: 29.4% 58.6% 11.9%
[libx264 @ 0x55db965ee980] mb P  I16..4: 15.0% 21.8%  1.3%  P16..4: 26.1%  7.5%  3.1%  0.0%  0.0%    skip:25.2%
[libx264 @ 0x55db965ee980] mb B  I16..4:  1.9%  1.7%  0.1%  B16..8: 36.3%  3.6%  0.5%  direct: 3.9%  skip:52.1%  L0:42.9% L1:52.1% BI: 5.0%
[libx264 @ 0x55db965ee980] 8x8 transform intra:56.2% inter:86.6%
[libx264 @ 0x55db965ee980] coded y,uvDC,uvAC intra: 19.5% 27.3% 2.1% inter: 11.7% 18.9% 0.1%
[libx264 @ 0x55db965ee980] i16 v,h,dc,p: 25% 54%  8% 12%
[libx264 @ 0x55db965ee980] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 25% 44%  1%  2%  2%  2%  1%  1%
[libx264 @ 0x55db965ee980] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 45% 13%  2%  7%  6%  6%  3%  3%
[libx264 @ 0x55db965ee980] i8c dc,h,v,p: 62% 27% 10%  1%
[libx264 @ 0x55db965ee980] Weighted P-Frames: Y:3.4% UV:0.0%
[libx264 @ 0x55db965ee980] ref P L0: 65.2% 18.0% 12.2%  4.6%  0.1%
[libx264 @ 0x55db965ee980] ref B L0: 89.1%  9.3%  1.6%
[libx264 @ 0x55db965ee980] ref B L1: 97.2%  2.8%
[libx264 @ 0x55db965ee980] kb/s:3798.37
[aac @ 0x55db965edf00] Qavg: 125.454


  


  The errors persist.

  


  >>> import cv2
>>> out = cv2.VideoWriter("./out.mp4", cv2.VideoWriter_fourcc(*'avc1'), 30, (800, 600), True)
[ERROR:0@91.872] global cap_ffmpeg_impl.hpp:3018 open Could not find encoder for codec_id=27, error: Encoder not found
[ERROR:0@91.872] global cap_ffmpeg_impl.hpp:3093 open VIDEOIO/FFMPEG: Failed to initialize VideoWriter


  


  Could someone please tell me what I'm doing wrong ?

  


• Statically built FFMPEG binary segmentation fault

  12 février 2020, par stevendesu

  I want to create a custom build of FFMPEG which rips out everything except for the ability to transmux HLS videos to MP4, and I need this build to be 100% static with no external dependencies

  I tried using the following configuration :

  ./configure \
  
      --extra-cflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-cxxflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-ldflags='-static -static-libstdc++ -static-libgcc' \
  
      --pkg-config-flags='--static' \
  
      --enable-static \
  
      --disable-shared \
  
      --disable-runtime-cpudetect \
  
      --disable-autodetect \
  
      --disable-ffplay \
  
      --disable-ffprobe \
  
      --disable-doc \
  
      --disable-avdevice \
  
      --disable-swresample \
  
      --disable-swscale \
  
      --disable-postproc \
  
      --disable-pthreads \
  
      --disable-w32threads \
  
      --disable-os2threads \
  
      --enable-network \
  
      --disable-dct \
  
      --disable-dwt \
  
      --disable-error-resilience \
  
      --disable-lsp \
  
      --disable-lzo \
  
      --disable-mdct \
  
      --disable-rdft \
  
      --disable-fft \
  
      --disable-faan \
  
      --disable-pixelutils \
  
      --disable-encoders \
  
      --disable-decoders \
  
      --disable-hwaccels \
  
      --disable-muxers \
  
      --enable-muxer=mov \
  
      --enable-muxer=mp4 \
  
      --disable-demuxers \
  
      --enable-demuxer=hls \
  
      --enable-demuxer=mpegts \
  
      --enable-demuxer=h264 \
  
      --enable-demuxer=aac \
  
      --disable-parsers \
  
      --enable-parser=h264 \
  
      --enable-parser=aac \
  
      --disable-bsfs \
  
      --disable-protocols \
  
      --enable-protocol=tcp \
  
      --enable-protocol=tls \
  
      --enable-protocol=http \
  
      --enable-protocol=https \
  
      --enable-protocol=hls \
  
      --disable-indevs \
  
      --disable-outdevs \
  
      --disable-devices \
  
      --disable-filters \
  
      --disable-alsa \
  
      --disable-appkit \
  
      --disable-avfoundation \
  
      --disable-bzlib \
  
      --disable-coreimage \
  
      --disable-iconv \
  
      --disable-lzma \
  
      --enable-openssl \
  
      --disable-sndio \
  
      --disable-sdl2 \
  
      --disable-securetransport \
  
      --disable-xlib \
  
      --disable-zlib \
  
      --disable-amf \
  
      --disable-audiotoolbox \
  
      --disable-cuda-llvm \
  
      --disable-cuvid \
  
      --disable-d3d11va \
  
      --disable-dxva2 \
  
      --disable-ffnvcodec \
  
      --disable-nvdec \
  
      --disable-nvenc \
  
      --disable-v4l2-m2m \
  
      --disable-vaapi \
  
      --disable-vdpau \
  
      --disable-videotoolbox \
  
      --disable-debug

  This looked about like what I wanted :

  install prefix            /usr/local
  
  source path               .
  
  C compiler                gcc
  
  C library                 glibc
  
  ARCH                      x86 (generic)
  
  big-endian                no
  
  runtime cpu detection     no
  
  standalone assembly       yes
  
  x86 assembler             nasm
  
  MMX enabled               yes
  
  MMXEXT enabled            yes
  
  3DNow! enabled            yes
  
  3DNow! extended enabled   yes
  
  SSE enabled               yes
  
  SSSE3 enabled             yes
  
  AESNI enabled             yes
  
  AVX enabled               yes
  
  AVX2 enabled              yes
  
  AVX-512 enabled           yes
  
  XOP enabled               yes
  
  FMA3 enabled              yes
  
  FMA4 enabled              yes
  
  i686 features enabled     yes
  
  CMOV is fast              yes
  
  EBX available             yes
  
  EBP available             yes
  
  debug symbols             no
  
  strip symbols             yes
  
  optimize for size         no
  
  optimizations             yes
  
  static                    yes
  
  shared                    no
  
  postprocessing support    no
  
  network support           yes
  
  threading support         no
  
  safe bitstream reader     yes
  
  texi2html enabled         no
  
  perl enabled              yes
  
  pod2man enabled           yes
  
  makeinfo enabled          no
  
  makeinfo supports HTML    no
  
  
  
  External libraries:
  
  openssl
  
  
  
  External libraries providing hardware acceleration:
  
  
  
  Libraries:
  
  avcodec                 avfilter                avformat                avutil
  
  
  
  Programs:
  
  ffmpeg
  
  
  
  Enabled decoders:
  
  
  
  Enabled encoders:
  
  
  
  Enabled hwaccels:
  
  
  
  Enabled parsers:
  
  aac                     h264
  
  
  
  Enabled demuxers:
  
  aac                     h264                    hls                     mpegts
  
  
  
  Enabled muxers:
  
  mov                     mp4
  
  
  
  Enabled protocols:
  
  hls                     http                    https                   tcp                     tls
  
  
  
  Enabled filters:
  
  aformat                 anull                   atrim                   format                  hflip                   null                    transpose               trim                    vflip
  
  
  
  Enabled bsfs:
  
  null
  
  
  
  Enabled indevs:
  
  
  
  Enabled outdevs:
  
  
  
  License: LGPL version 2.1 or later

  It included several filters which I won’t ever need or use, but these filters are pulled in automatically if you don’t specify --disable-avfilter, and specifying --disable-avfilter prevents the ffmpeg binary from being produced. So I’m stuck with those.

  Using these parameters and then running make, I received a binary that was about 5.9 MB in size and looked right :

  $> ldd ffmpeg
  
          not a dynamic executable

  But when I try to run it :

  $> ./ffmpeg -version
  
  Segmentation fault

  Using valgrind to try and inspect the cause of the segmentation fault :

  $> valgrind ./ffmpeg -version
  
  .... lots of stuff ...
  
  ==61362== Jump to the invalid address stated on the next line
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
  
  ==61362==
  
  ==61362==
  
  ==61362== Process terminating with default action of signal 11 (SIGSEGV)
  
  ==61362==  Bad permissions for mapped region at address 0x0
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==
  
  ==61362== HEAP SUMMARY:
  
  ==61362==     in use at exit: 0 bytes in 0 blocks
  
  ==61362==   total heap usage: 0 allocs, 0 frees, 0 bytes allocated
  
  ==61362==
  
  ==61362== All heap blocks were freed -- no leaks are possible
  
  ==61362==
  
  ==61362== For counts of detected and suppressed errors, rerun with: -v
  
  ==61362== Use --track-origins=yes to see where uninitialised values come from
  
  ==61362== ERROR SUMMARY: 93 errors from 90 contexts (suppressed: 0 from 0)
  
  Segmentation fault

  Attempting to access memory at location 0x0 sounds like trying to follow a null pointer. But I’m not sure how to fix this.

  gdb backtrace

  When I first ran gdb ./ffmpeg gdb immediately gave me a segmentation fault and I wasn’t kicked into the gdb REPL, so I couldn’t investigate

  After rebuilding ffmpeg I was able to get in this time :

  $> gdb ./ffmpeg
  
  
  
  GNU gdb (Ubuntu 8.1-0ubuntu3.2) 8.1.0.20180409-git
  
  Copyright (C) 2018 Free Software Foundation, Inc.
  
  License GPLv3+: GNU GPL version 3 or later /gnu.org/licenses/gpl.html>
  
  This is free software: you are free to change and redistribute it.
  
  There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
  
  and "show warranty" for details.
  
  This GDB was configured as "x86_64-linux-gnu".
  
  Type "show configuration" for configuration details.
  
  For bug reporting instructions, please see:
  
  /www.gnu.org/software/gdb/bugs/>.
  
  Find the GDB manual and other documentation resources online at:
  
  /www.gnu.org/software/gdb/documentation/>.
  
  For help, type "help".
  
  Type "apropos word" to search for commands related to "word"...
  
  Reading symbols from ffmpeg...done.
  
  (gdb) r
  
  Starting program: /src/FFmpeg/ffmpeg
  
  warning: Error disabling address space randomization: Operation not permitted
  
  
  
  Program received signal SIGSEGV, Segmentation fault.
  
  0x0000000000000000 in ?? ()
  
  (gdb) bt
  
  #0  0x0000000000000000 in ?? ()
  
  #1  0x0000000000f9a8d5 in __register_frame_info_bases.part.6 ()
  
  #2  0x00000000004445fd in frame_dummy ()
  
  #3  0x0000000000000001 in ?? ()
  
  #4  0x0000000000ebd20c in __libc_csu_init ()
  
  #5  0x0000000000ebc9d7 in __libc_start_main ()
  
  #6  0x000000000044451a in _start ()
  
  (gdb)

  I tried grep’ing the code base for __register_frame_info_bases and found nothing. So I’m not really sure where to go from here

  A fix, but not an explanation

  By randomly removing configuration parameters and rebuilding I discovered that --disable-pthreads was causing the segmentation fault. When I remove this, ffmpeg runs just fine

  I don’t know why this is the case, though. Why would they make it possible to remove something that you need to run ?