Recherche avancée

Médias (1)

Mot : - Tags -/intégration

Autres articles (60)

  • Participer à sa traduction

    10 avril 2011

    Vous pouvez nous aider à améliorer les locutions utilisées dans le logiciel ou à traduire celui-ci dans n’importe qu’elle nouvelle langue permettant sa diffusion à de nouvelles communautés linguistiques.
    Pour ce faire, on utilise l’interface de traduction de SPIP où l’ensemble des modules de langue de MediaSPIP sont à disposition. ll vous suffit de vous inscrire sur la liste de discussion des traducteurs pour demander plus d’informations.
    Actuellement MediaSPIP n’est disponible qu’en français et (...)

  • Personnaliser les catégories

    21 juin 2013, par

    Formulaire de création d’une catégorie
    Pour ceux qui connaissent bien SPIP, une catégorie peut être assimilée à une rubrique.
    Dans le cas d’un document de type catégorie, les champs proposés par défaut sont : Texte
    On peut modifier ce formulaire dans la partie :
    Administration > Configuration des masques de formulaire.
    Dans le cas d’un document de type média, les champs non affichés par défaut sont : Descriptif rapide
    Par ailleurs, c’est dans cette partie configuration qu’on peut indiquer le (...)

  • MediaSPIP v0.2

    21 juin 2013, par

    MediaSPIP 0.2 is the first MediaSPIP stable release.
    Its official release date is June 21, 2013 and is announced here.
    The zip file provided here only contains the sources of MediaSPIP in its standalone version.
    To get a working installation, you must manually install all-software dependencies on the server.
    If you want to use this archive for an installation in "farm mode", you will also need to proceed to other manual (...)

Sur d’autres sites (11012)

  • Prevent output in error log when ffmpeg job is initiated via PHP's shell_exec()

    19 janvier 2016, par Jake

    I’m getting the entire output of the ffmpeg command printed to my server’s error.log — but as far as I can tell, the jobs complete successfully with no error.

    Is there any way to suppress the output ? I have seen people append stuff like >/dev/null 2>/dev/null & to their command, however that forces the command to return immediately and the job runs in the background. Unfortunately, I need the job to run in the foreground, because I need to do stuff with the output once the job is done.

    Here’s the command I am running...

    shell_exec('ffmpeg -i input.mp4 -f mp4 -c:v libx264 -preset slow -crf 24 -s 1280x720 -c:a libfdk_aac -profile:a aac_he -ar 22050 -b:a 64k -movflags +faststart output-1280x720.mp4');

    Here’s the output I am seeing...

    [Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] ffmpeg version N-77432-gc0f67e1 Copyright (c) 2000-2015 the FFmpeg developers
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   built with gcc 4.4.5 (Debian 4.4.5-8)
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   configuration: --prefix=/usr --enable-nonfree --enable-libfreetype --enable-gpl --enable-libx264 --enable-x11grab --enable-zlib --enable-libvpx --enable-libtheora --enable-libvorbis --enable-libfdk-aac --enable-libmp3lame --enable-libopus
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libavutil      55. 11.100 / 55. 11.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libavcodec     57. 19.100 / 57. 19.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libavformat    57. 20.100 / 57. 20.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libavdevice    57.  0.100 / 57.  0.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libavfilter     6. 21.100 /  6. 21.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libswscale      4.  0.100 /  4.  0.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libswresample   2.  0.101 /  2.  0.101
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   libpostproc    54.  0.100 / 54.  0.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'test-video.mp4':
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   Metadata:
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     major_brand     : mp42
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     minor_version   : 0
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     compatible_brands: mp42mp41
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     creation_time   : 2015-07-14 22:13:20
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   Duration: 00:00:10.51, start: 0.000000, bitrate: 17178 kb/s
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709), 1920x1080 [SAR 1:1 DAR 16:9], 17170 kb/s, 23.98 fps, 23.98 tbr, 24k tbn, 47.95 tbc (default)
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     Metadata:
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]       creation_time   : 2015-07-14 22:13:20
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]       handler_name    : Alias Data Handler
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]       encoder         : AVC Coding
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] Codec AVOption b (set bitrate (in bits/s)) specified for output file #0 (test-video-480p.mp4) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] Codec AVOption profile () specified for output file #0 (test-video-480p.mp4) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] [libx264 @ 0x4518ea0] using SAR=1280/1281
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] [libx264 @ 0x4518ea0] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 AVX
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] [libx264 @ 0x4518ea0] profile High, level 3.0
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] [libx264 @ 0x4518ea0] 264 - core 120 r2151 a3f4407 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=5 deblock=1:0:0 analyse=0x3:0x113 me=umh subme=8 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=2 b_bias=0 direct=3 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=23 scenecut=40 intra_refresh=0 rc_lookahead=50 rc=crf mbtree=1 crf=24.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] Output #0, mp4, to 'test-video-480p.mp4':
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   Metadata:
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     major_brand     : mp42
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     minor_version   : 0
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     compatible_brands: mp42mp41
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     encoder         : Lavf57.20.100
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 854x480 [SAR 1280:1281 DAR 16:9], q=-1--1, 23.98 fps, 24k tbn, 23.98 tbc (default)
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     Metadata:
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]       creation_time   : 2015-07-14 22:13:20
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]       handler_name    : Alias Data Handler
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]       encoder         : Lavc57.19.100 libx264
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]     Side data:
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]       unknown side data type 10 (24 bytes)
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] Stream mapping:
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX]   Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
    
[Tue Jan 19 17:10:59 2016] [error] [client XXX.XXX.XXX.XXX] Press [q] to stop, [?] for help
    
[Tue Jan 19 17:11:00 2016] [error] [client XXX.XXX.XXX.XXX] frame=   24 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    \r
    
[Tue Jan 19 17:11:00 2016] [error] [client XXX.XXX.XXX.XXX] frame=   53 fps= 51 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    \r
    
[Tue Jan 19 17:11:02 2016] [error] [client XXX.XXX.XXX.XXX] frame=   62 fps= 25 q=29.0 size=      75kB time=00:00:00.00 bitrate=N/A speed=   0x    \r
    
[Tue Jan 19 17:11:02 2016] [error] [client XXX.XXX.XXX.XXX] frame=   68 fps= 20 q=29.0 size=      90kB time=00:00:00.25 bitrate=2946.8kbits/s speed=0.0745x    \r
    
[Tue Jan 19 17:11:03 2016] [error] [client XXX.XXX.XXX.XXX] frame=   74 fps= 18 q=29.0 size=     103kB time=00:00:00.50 bitrate=1689.9kbits/s speed=0.12x    \r
    
[Tue Jan 19 17:11:04 2016] [error] [client XXX.XXX.XXX.XXX] frame=   80 fps= 16 q=29.0 size=     115kB time=00:00:00.75 bitrate=1258.5kbits/s speed=0.148x    \r
    
[Tue Jan 19 17:11:05 2016] [error] [client XXX.XXX.XXX.XXX] frame=   86 fps= 15 q=29.0 size=     128kB time=00:00:01.00 bitrate=1049.4kbits/s speed=0.175x    \r
    
[Tue Jan 19 17:11:05 2016] [error] [client XXX.XXX.XXX.XXX] frame=   92 fps= 15 q=29.0 size=     140kB time=00:00:01.25 bitrate= 917.2kbits/s speed=0.201x    \r
    
[Tue Jan 19 17:11:06 2016] [error] [client XXX.XXX.XXX.XXX] frame=   94 fps= 14 q=29.0 size=     146kB time=00:00:01.33 bitrate= 895.4kbits/s speed=0.196x    \r
    
[Tue Jan 19 17:11:07 2016] [error] [client XXX.XXX.XXX.XXX] frame=  100 fps= 13 q=29.0 size=     158kB time=00:00:01.58 bitrate= 816.6kbits/s speed=0.211x    \r

  • Error in building FFMPEG-3.4 with Android-NDK-16.1

    30 avril 2018, par Sagar Trehan

    Trying to compile the FFMPEG-3.4 with Android-NDK-16.1.

    Compiling the source on Mac.

    Getting below Warnings/Errors :

    1. WARNING : /Users/strehan/Library/Android/sdk/ndk-bundle/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-pkg-config not found, library detection may fail.

    2. Error : In file included from libavdevice/avdevice.c:19:0 :./libavutil/avassert.h:30:20 : fatal error : stdlib.h : No such file or directory

    3. Error : /Users/strehan/Library/Android/sdk/ndk-bundle/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/include/stdint.h:9:26 : fatal error : stdint.h : No such file or directory

    4. Error : /libavutil/common.h:33:19 : fatal error : errno.h : No such file or directory

    Below is the build_script.sh using for build :

    #!/bin/bash
    
NDK=/Users/strehan/Library/Android/sdk/ndk-bundle
    
SYSROOT=$NDK/platforms/android-21/arch-arm/
    
TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64
    
function build_one
    
{
    
./configure \
    
--prefix=$PREFIX \
    
--enable-shared \
    
--disable-static \
    
--disable-doc \
    
--disable-ffmpeg \
    
--disable-ffplay \
    
--disable-ffprobe \
    
--disable-doc \
    
--disable-symver \
    
--enable-protocol=concat \
    
--enable-protocol=file \
    
--enable-muxer=mp4 \
    
--enable-demuxer=mpegts \
    
--cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi- \
    
--target-os=linux \
    
--arch=arm \
    
--enable-cross-compile \
    
--sysroot=$SYSROOT \
    
--extra-cflags="-Os -fpic $ADDI_CFLAGS" \
    
--extra-ldflags="$ADDI_LDFLAGS" \
    
$ADDITIONAL_CONFIGURE_FLAG
    
make clean
    
make -j3
    
make install
    
}
    
CPU=arm
    
PREFIX=$(pwd)/android/$CPU
    
ADDI_CFLAGS="-marm"
    
build_one

    Terminal output :

    Enabled indevs:
    
lavfi
    

    
Enabled outdevs:
    

    
License: LGPL version 2.1 or later
    

    
WARNING: /Users/strehan/Library/Android/sdk/ndk-bundle/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-pkg-config not found, library detection may fail.
    
config.h is unchanged
    
libavutil/avconfig.h is unchanged
    
libavcodec/bsf_list.c is unchanged
    
libavformat/protocol_list.c is unchanged
    
ffbuild/config.sh is unchanged
    
GEN libavutil/libavutil.version
    
GEN libswscale/libswscale.version
    
GEN libswresample/libswresample.version
    
GEN libavcodec/libavcodec.version
    
GEN libavformat/libavformat.version
    
GEN libavfilter/libavfilter.version
    
GEN libavdevice/libavdevice.version
    
CC  libavdevice/alldevices.o
    
CC  libavdevice/avdevice.o
    
CC  libavdevice/lavfi.o
    
In file included from libavdevice/avdevice.c:19:0:
    
./libavutil/avassert.h:30:20: fatal error: stdlib.h: No such file or directory
    
 #include 
    
                    ^
    
compilation terminated.
    
make: *** [libavdevice/avdevice.o] Error 1
    
make: *** Waiting for unfinished jobs....
    
In file included from ./libavutil/avutil.h:296:0,
    
                 from ./libavutil/log.h:25,
    
                 from libavdevice/avdevice.h:48,
    
                 from libavdevice/alldevices.c:23:
    
./libavutil/common.h:33:19: fatal error: errno.h: No such file or directory
    
 #include 
    
                   ^
    
compilation terminated.
    
In file included from ./libavutil/avstring.h:25:0,
    
                 from ./libavutil/bprint.h:27,
    
                 from libavdevice/lavfi.c:30:
    
/Users/strehan/Library/Android/sdk/ndk-bundle/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/lib/gcc/arm-linux-androideabi/4.9.x/include/stdint.h:9:26: fatal error: stdint.h: No such file or directory
    
 # include_next 
    
                          ^
    
make: *** [libavdevice/alldevices.o] Error 1
    
compilation terminated.
    
make: *** [libavdevice/lavfi.o] Error 1
    
INSTALL doc/examples/avio_dir_cmd.c
    
INSTALL doc/examples/avio_reading.c
    
INSTALL doc/examples/decode_audio.c
    
INSTALL doc/examples/decode_video.c
    
INSTALL doc/examples/demuxing_decoding.c
    
INSTALL doc/examples/encode_audio.c
    
INSTALL doc/examples/encode_video.c
    
INSTALL doc/examples/extract_mvs.c
    
INSTALL doc/examples/filter_audio.c
    
INSTALL doc/examples/filtering_audio.c
    
INSTALL doc/examples/filtering_video.c
    
INSTALL doc/examples/http_multiclient.c
    
INSTALL doc/examples/hw_decode.c
    
INSTALL doc/examples/metadata.c
    
INSTALL doc/examples/muxing.c
    
INSTALL doc/examples/qsvdec.c
    
INSTALL doc/examples/remuxing.c
    
INSTALL doc/examples/resampling_audio.c
    
INSTALL doc/examples/scaling_video.c
    
INSTALL doc/examples/transcode_aac.c
    
INSTALL doc/examples/transcoding.c
    
INSTALL doc/examples/vaapi_encode.c
    
INSTALL doc/examples/README
    
INSTALL doc/examples/Makefile
    
INSTALL doc/examples/avio_dir_cmd.c
    
INSTALL doc/examples/avio_reading.c
    
INSTALL doc/examples/decode_audio.c
    
INSTALL doc/examples/decode_video.c
    
INSTALL doc/examples/demuxing_decoding.c
    
INSTALL doc/examples/encode_audio.c
    
INSTALL doc/examples/encode_video.c
    
INSTALL doc/examples/extract_mvs.c
    
INSTALL doc/examples/filter_audio.c
    
INSTALL doc/examples/filtering_audio.c
    
INSTALL doc/examples/filtering_video.c
    
INSTALL doc/examples/http_multiclient.c
    
INSTALL doc/examples/hw_decode.c
    
INSTALL doc/examples/metadata.c
    
INSTALL doc/examples/muxing.c
    
INSTALL doc/examples/qsvdec.c
    
INSTALL doc/examples/remuxing.c
    
INSTALL doc/examples/resampling_audio.c
    
INSTALL doc/examples/scaling_video.c
    
INSTALL doc/examples/transcode_aac.c
    
INSTALL doc/examples/transcoding.c
    
INSTALL doc/examples/vaapi_encode.c
    
INSTALL doc/examples/README
    
INSTALL doc/examples/Makefile
    
CC  libavdevice/alldevices.o
    
In file included from ./libavutil/avutil.h:296:0,
    
                 from ./libavutil/log.h:25,
    
                 from libavdevice/avdevice.h:48,
    
                 from libavdevice/alldevices.c:23:
    
./libavutil/common.h:33:19: fatal error: errno.h: No such file or directory
    
 #include 
    
                   ^
    
compilation terminated.
    
make: *** [libavdevice/alldevices.o] Error 1

    Please help to fix these errors. Due to these errors/warnings compilation is getting terminated.

    Note :
    Android directory is getting created even after these errors. But I think library is not compiled properly due to above errors.

    Let me know if anything else needed. Please help.

  • problems for building FFMPEG library for android on windows

    6 février 2014, par user3275506

    I am developing application for video which supports all formats.
    After much research I came to conclusion that I have to use FFMPEG library
    I have downloaded that I followed some steps I am geting unexpected end of the file.

    #!/usr/bin/env bash
    
NDK=cygdrive/C/AndroidNDKx86/android-ndk-r9b
    
SYSROOT=$NDK/platforms/android-18/arch-arm/
    
TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/windows
    
function build_one
    
{   
    
./configure \
    
--prefix=$PREFIX \
    
--enable-shared \
    
--disable-static \
    
--disable-doc \
    
--disable-ffmpeg \
    
--disable-ffplay \
    
--disable-ffprobe \
    
--disable-ffserver \
    
--disable-avdevice \
    
--disable-doc \
    
--disable-symver \
    
--cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi \
    
--target-os=linux \
    
--arch=arm \
    
--enable-cross-compile \
    
--sysroot=$SYSROOT \
    
--extra-cflags="-Os -fpic $ADDI_CFLAGS" \
    
--extra-ldflags="$ADDI_LDFLAGS" \
    
$ADDITIONAL_CONFIGURE_FLAG
    

    
make clean
    
make -j4
    
make install
    
}
    
CPU=arm
    
PREFIX=$(pwd)/android/$CPU
    
ADDI_CFLAGS="-marm"
    
build_one

    Please tell me is the code wrong it gives output unexpected end of file

    I tried another one it was almost compile but during make at the end it got some errors
    Here is the updated script

    #!/bin/bash
    
    export TMPDIR=C:/cygwin/tmp
    
    ANDROID_API=android-18
    
    export ANDROID_NDK=C:/AndroidNDKx86/android-ndk-r9b
    
    export ANDROID_SDK=E:/Android/Android/Data/Android/AndroidADT/sdk
    
    SYSROOT=$ANDROID_NDK/platforms/$ANDROID_API/arch-arm
    
    ANDROID_BIN=$ANDROID_NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/windows/bin
    
    CROSS_COMPILE=${ANDROID_BIN}/arm-linux-androideabi-
    
    export PATH=$PATH:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools
    
    export ARM_ROOT=$ANDROID_NDK
    
    export ARM_INC=$ARM_ROOT/platforms/android-18/arch-arm/usr/include
    
    export ARM_LIB=$ARM_ROOT/platforms/android-18/arch-arm/usr/lib
    
    export LIB_INC=${HOME}/include
    
    export LIB_LIB=${HOME}/lib
    

    
    FLAGS="--target-os=linux 
    
    --enable-cross-compile 
    
    --cross-prefix=$CROSS_COMPILE 
    
    --arch=arm --prefix=$HOME 
    
    --disable-shared 
    
    --enable-static 
    
    --extra-libs=-static 
    
    --extra-cflags=--static 
    
    --enable-small 
    
    --disable-asm 
    
    --disable-yasm 
    
    --disable-amd3dnow 
    
    --disable-amd3dnowext 
    
    --disable-mmx 
    
    --disable-sse 
    
    --disable-debug
    
    --disable-ssse3 
    
    --disable-indevs"     
    
./configure $FLAGS \
    
--cc="${CROSS_COMPILE}gcc 
    
--sysroot=${SYSROOT}"  \
    
--cxx="${CROSS_COMPILE}g++ --sysroot=${SYSROOT}" \
    
--nm="${CROSS_COMPILE}nm" \
    
--ar="${CROSS_COMPILE}ar"
    
make clean
    
make -j4 || exit 1
    
make install || exit 1

    Following is the output
    OUTPUT :

    WARNING: C:/AndroidNDKx86/android-ndk-r9b/toolchains/arm-linux-androideabi-
    
4.8/prebuilt/windows/bin/arm-linux-androideabi-pkg-config not found, library detection 
    
may fail.
    
CC      libavdevice/alldevices.o
    
CC      libavdevice/avdevice.o
    
CC      libavfilter/af_aconvert.o
    
In file included from libavdevice/avdevice.c:19:0:
    
./libavutil/avassert.h:30:20: fatal error: stdlib.h: No such file or directory
    
 #include 
    
                    ^
    
compilation terminated.
    
In file included from libavdevice/alldevices.c:21:0:
    
./config.h:8:18: warning: missing terminating " character [enabled by default]
    
 (GCC)"e CC_IDENT "gcc 4.8
    
                  ^
    
./config.h:9:7: warning: missing terminating " character [enabled by default]
    
 #define av_restrict restrict
    
       ^
    
./config.h:9:2: error: missing terminating " character
    
 #define av_restrict restrict
    
  ^
    
common.mak:48: recipe for target 'libavdevice/avdevice.o' failed
    
make: *** [libavdevice/avdevice.o] Error 1
    
make: *** Waiting for unfinished jobs....
    
In file included from libavdevice/version.h:28:0,
    
                 from libavdevice/avdevice.h:22,
    
                 from libavdevice/alldevices.c:22:
    
./libavutil/avutil.h:120:1: error: expected '=', ',', ';', 'asm' or '__attribute__' 
    
before 'unsigned'
    
 unsigned avutil_version(void);
    
 ^
    
In file included from ./libavutil/avutil.h:238:0,
    
                 from libavdevice/version.h:28,
    
                 from libavdevice/avdevice.h:22,
    
                 from libavdevice/alldevices.c:22:
    
./libavutil/common.h:29:19: fatal error: errno.h: No such file or directory
    
 #include 
    
                   ^
    
compilation terminated.
    
CC      libavfilter/af_afade.o
    
common.mak:48: recipe for target 'libavdevice/alldevices.o' failed
    
make: *** [libavdevice/alldevices.o] Error 1
    
In file included from ./libavutil/channel_layout.h:25:0,
    
                 from libavfilter/af_aconvert.c:29:
    
c:\androidndkx86\android-ndk-r9b\toolchains\arm-linux-androideabi- 
    
4.8\prebuilt\windows\lib\gcc\arm-linux-androideabi\4.8\include\stdint.h:9:26: fatal  
    
error: stdint.h: No such file or directory
    
 # include_next 
    
                          ^
    
compilation terminated.
    
common.mak:48: recipe for target 'libavfilter/af_aconvert.o' failed
    
make: *** [libavfilter/af_aconvert.o] Error 1
    
In file included from ./libavutil/rational.h:31:0,
    
                 from ./libavutil/opt.h:30,
    
                 from libavfilter/af_afade.c:26:
    
c:\androidndkx86\android-ndk-r9b\toolchains\arm-linux-androideabi-  
    
4.8\prebuilt\windows\lib\gcc\arm-linux-androideabi\4.8\include\stdint.h:9:26: fatal    
    
error: stdint.h: No such file or directory
    
 # include_next 
    
                          ^
    
compilation terminated.
    
common.mak:48: recipe for target 'libavfilter/af_afade.o' failed
    
make: *** [libavfilter/af_afade.o] Error 1

    Is the script wrong ??

Navigation