Recherche avancée

Sur d’autres sites (7608)

• FFMPEG PNG sequence into mkv cause "inflate returned error -3" every 600-800 frames [closed]

  30 novembre 2023, par sergey9295

  I am new to ffmpeg. I try to use it for creating videos from png sequences. I have uncompressed pngs. All of them rgb24 format.

  


  But during encoding process I get inflate errors. I compared PNG and video frame by frame. And video have approximately 1 dupe frame every 600-800 frames instead of the ones that should be on that places. I tried another codecs, tried to clear png's EXIF(it made things even worse), made sure that memory was enough. Doesn't matter.

  


  The worst part is that this errors are pretty random. I encode one sequence 3 times and get 3 different sets of error-causing frames.

  


  FFMPEG was downloaded from official site.

  


  PS C:\Users\sergey9295\Desktop\Upscaler\bin> ./ffmpeg -framerate 24000/1001 -i 24o/frame%04d.png -c:v libx264 -qp 0 -r 24000/1001 -pix_fmt yuv420p BC108K.mkv
ffmpeg version N-112872-g67ce690bc6-20231128 Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 13.2.0 (crosstool-NG 1.25.0.232_c175b21)
  configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-w64-mingw32- --arch=x86_64 --target-os=mingw32 --enable-gpl --enable-version3 --disable-debug --disable-w32threads --enable-pthreads --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libharfbuzz --enable-libvorbis --enable-opencl --disable-libpulse --enable-libvmaf --disable-libxcb --disable-xlib --enable-amf --enable-libaom --enable-libaribb24 --enable-avisynth --enable-chromaprint --enable-libdav1d --enable-libdavs2 --disable-libfdk-aac --enable-ffnvcodec --enable-cuda-llvm --enable-frei0r --enable-libgme --enable-libkvazaar --enable-libaribcaption --enable-libass --enable-libbluray --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librist --enable-libssh --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libvpl --enable-openal --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopenmpt --enable-librav1e --enable-librubberband --enable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --disable-libdrm --enable-vaapi --enable-libvidstab --enable-vulkan --enable-libshaderc --enable-libplacebo --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --enable-libzvbi --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-ldflags=-pthread --extra-ldexeflags= --extra-libs=-lgomp --extra-version=20231128
  libavutil      58. 32.100 / 58. 32.100
  libavcodec     60. 35.100 / 60. 35.100
  libavformat    60. 18.100 / 60. 18.100
  libavdevice    60.  4.100 / 60.  4.100
  libavfilter     9. 13.100 /  9. 13.100
  libswscale      7.  6.100 /  7.  6.100
  libswresample   4. 13.100 /  4. 13.100
  libpostproc    57.  4.100 / 57.  4.100
Input #0, image2, from '24o/frame%04d.png':
  Duration: 00:01:32.09, start: 0.000000, bitrate: N/A
  Stream #0:0: Video: png, rgb24(pc, gbr/bt709/iec61966-2-1), 7680x4320, 23.98 fps, 23.98 tbr, 23.98 tbn
Stream mapping:
  Stream #0:0 -> #0:0 (png (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 00000231363c6280] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 00000231363c6280] profile High 4:4:4 Predictive, level 6.0, 4:2:0, 8-bit
[libx264 @ 00000231363c6280] 64 - core 164 - H.264/MPEG-4 AVC codec - Copyleft 2003-2023 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=0 mixed_ref=1 me_range=16 chroma_me=1 trellis=0 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=0 chroma_qp_offset=0 threads=18 lookahead_threads=3 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=2 keyint=250 keyint_min=23 scenecut=40 intra_refresh=0 rc=cqp mbtree=0 qp=0
Output #0, matroska, to 'BC108K.mkv':
  Metadata:
    encoder         : Lavf60.18.100
  Stream #0:0: Video: h264 (H264 / 0x34363248), yuv420p(tv, unknown/bt709/iec61966-2-1, progressive), 7680x4320, q=2-31, 23.98 fps, 1k tbn
    Metadata:
      encoder         : Lavc60.35.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
[png @ 00000231363c8880] inflate returned error -301:02.72 bitrate=698356.0kbits/s speed=0.171x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library
[png @ 00000231363c8880] inflate returned error -301:15.24 bitrate=679969.1kbits/s dup=1 drop=0 speed=0.172x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library3x
[png @ 00000231363f32c0] inflate returned error -301:16.65 bitrate=694583.2kbits/s dup=2 drop=0 speed=0.171x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library1x
[png @ 000002313646a100] inflate returned error -301:20.78 bitrate=742902.6kbits/s dup=3 drop=0 speed=0.167x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library6x
[png @ 000002313646ea00] inflate returned error -301:26.92 bitrate=839679.5kbits/s dup=4 drop=0 speed=0.159x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library8x
[png @ 00000231363cc740] inflate returned error -301:29.38 bitrate=874703.4kbits/s dup=5 drop=0 speed=0.156x
[vist#0:0/png @ 00000231363c16c0] Error submitting packet to decoder: Generic error in an external library6x
[out#0/matroska @ 00000231363a7200] video:9827779kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.000442%
frame= 2208 fps=3.8 q=-1.0 Lsize= 9827822kB time=00:01:32.05 bitrate=874625.3kbits/s dup=6 drop=0 speed=0.158x


  


  IMO the problem is zlib from libpng. But I don't have skills to recompile it with libspng that doesn't require zlib. Maybe there is a ffmpeg version without this error ?

  


• ffmpeg piped output producing incorrect metadata frame count with Python

  6 décembre 2024, par Xorgon

  Using Python, I am attempting to use ffmpeg to compress videos and put them in a PowerPoint. This works great, however, the video files themselves have incorrect frame counts which can cause issues when I read from those videos in other code.

  


  Edit for clarification : by "frame count" I mean the metadata frame count. The actual number of frames contained in the video is correct, but querying the metadata gives an incorrect frame count.

  


  Having eliminated the PowerPoint aspect of the code, I've narrowed this down to the following minimal reproducing example of saving an output from an ffmpeg pipe :

  


  from subprocess import Popen, PIPE

video_path = 'test_mp4.mp4'

ffmpeg_pipe = Popen(['ffmpeg',
                     '-y',  # Overwrite files
                     '-i', f'{video_path}',  # Input from file
                     '-f', 'avi',  # Output format
                     '-c:v', 'libx264',  # Codec
                     '-'],  # Output to pipe
                    stdout=PIPE)

new_path = "piped_video.avi"
vid_file = open(new_path, "wb")
vid_file.write(ffmpeg_pipe.stdout.read())
vid_file.close()


  


  I've tested several different videos. One small example video that I've tested can be found here.

  


  I've tried a few different codecs with avi format and tried libvpx with webm format. For the avi outputs, the frame count usually reads as 1073741824 (2^30). Weirdly, for the webm format, the frame count read as -276701161105643264.

  


  This is a snippet I used to read the frame count, but one could also see the error by opening the video details in Windows Explorer and seeing the total time as something like 9942 hours, 3 minutes, and 14 seconds.

  


  import cv2

video_path = 'test_mp4.mp4'
new_path = "piped_video.webm"

cap = cv2.VideoCapture(video_path)
print(f"Original video frame count: = {int(cap.get(cv2.CAP_PROP_FRAME_COUNT)):d}")
cap.release()

cap = cv2.VideoCapture(new_path)
print(f"Piped video frame count: = {int(cap.get(cv2.CAP_PROP_FRAME_COUNT)):d}")
cap.release()


  


  For completeness, here is the ffmpeg output :

  


  ffmpeg version 2023-06-11-git-09621fd7d9-full_build-www.gyan.dev Copyright (c) 2000-2023 the FFmpeg developers
  built with gcc 12.2.0 (Rev10, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-bzlib --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libaribb24 --enable-libaribcaption --enable-libdav1d --enable-libdavs2 --enable-libuavs3d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libaom --enable-libjxl --enable-libopenjpeg --enable-libvpx --enable-mediafoundation --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-liblensfun --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libvpl --enable-libshaderc --enable-vulkan --enable-libplacebo --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libcodec2 --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
  libavutil      58. 13.100 / 58. 13.100
  libavcodec     60. 17.100 / 60. 17.100
  libavformat    60.  6.100 / 60.  6.100
  libavdevice    60.  2.100 / 60.  2.100
  libavfilter     9.  8.101 /  9.  8.101
  libswscale      7.  3.100 /  7.  3.100
  libswresample   4. 11.100 /  4. 11.100
  libpostproc    57.  2.100 / 57.  2.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'test_mp4.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 0
    compatible_brands: isommp42
    creation_time   : 2022-08-10T12:54:09.000000Z
  Duration: 00:00:06.67, start: 0.000000, bitrate: 567 kb/s
  Stream #0:0[0x1](eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 384x264 [SAR 1:1 DAR 16:11], 563 kb/s, 30 fps, 30 tbr, 30k tbn (default)
    Metadata:
      creation_time   : 2022-08-10T12:54:09.000000Z
      handler_name    : Mainconcept MP4 Video Media Handler
      vendor_id       : [0][0][0][0]
      encoder         : AVC Coding
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0000018c68c8b9c0] using SAR=1/1
[libx264 @ 0000018c68c8b9c0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0000018c68c8b9c0] profile High, level 2.1, 4:2:0, 8-bit
Output #0, avi, to 'pipe:':
  Metadata:
    major_brand     : mp42
    minor_version   : 0
    compatible_brands: isommp42
    ISFT            : Lavf60.6.100
  Stream #0:0(eng): Video: h264 (H264 / 0x34363248), yuv420p(progressive), 384x264 [SAR 1:1 DAR 16:11], q=2-31, 30 fps, 30 tbn (default)
    Metadata:
      creation_time   : 2022-08-10T12:54:09.000000Z
      handler_name    : Mainconcept MP4 Video Media Handler
      vendor_id       : [0][0][0][0]
      encoder         : Lavc60.17.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
[out#0/avi @ 0000018c687f47c0] video:82kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 3.631060%
frame=  200 fps=0.0 q=-1.0 Lsize=      85kB time=00:00:06.56 bitrate= 106.5kbits/s speed=76.2x    
[libx264 @ 0000018c68c8b9c0] frame I:1     Avg QP:16.12  size:  3659
[libx264 @ 0000018c68c8b9c0] frame P:80    Avg QP:21.31  size:   647
[libx264 @ 0000018c68c8b9c0] frame B:119   Avg QP:26.74  size:   243
[libx264 @ 0000018c68c8b9c0] consecutive B-frames:  3.0% 53.0%  0.0% 44.0%
[libx264 @ 0000018c68c8b9c0] mb I  I16..4: 17.6% 70.6% 11.8%
[libx264 @ 0000018c68c8b9c0] mb P  I16..4:  0.8%  1.7%  0.6%  P16..4: 17.6%  4.6%  3.3%  0.0%  0.0%    skip:71.4%
[libx264 @ 0000018c68c8b9c0] mb B  I16..4:  0.1%  0.3%  0.2%  B16..8: 11.7%  1.4%  0.4%  direct: 0.6%  skip:85.4%  L0:32.0% L1:59.7% BI: 8.3%
[libx264 @ 0000018c68c8b9c0] 8x8 transform intra:59.6% inter:62.4%
[libx264 @ 0000018c68c8b9c0] coded y,uvDC,uvAC intra: 48.5% 0.0% 0.0% inter: 3.5% 0.0% 0.0%
[libx264 @ 0000018c68c8b9c0] i16 v,h,dc,p: 19% 39% 25% 17%
[libx264 @ 0000018c68c8b9c0] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 21% 25% 30%  3%  3%  4%  4%  4%  5%
[libx264 @ 0000018c68c8b9c0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 20% 16%  6%  8%  8%  8%  5%  6%
[libx264 @ 0000018c68c8b9c0] i8c dc,h,v,p: 100%  0%  0%  0%
[libx264 @ 0000018c68c8b9c0] Weighted P-Frames: Y:0.0% UV:0.0%
[libx264 @ 0000018c68c8b9c0] ref P L0: 76.2%  7.9% 11.2%  4.7%
[libx264 @ 0000018c68c8b9c0] ref B L0: 85.6% 12.9%  1.5%
[libx264 @ 0000018c68c8b9c0] ref B L1: 97.7%  2.3%
[libx264 @ 0000018c68c8b9c0] kb/s:101.19


  


  So the question is : why does this happen, and how can one avoid it ?

  


• FFMPEG Fontconfig error : Cannot load default config file : No such file : (null) Abort trap

  28 juillet 2023, par FastNumbers

  /usr/local/bin/ffmpeg -loop 1 -t 11.14 -i 3339861349.jpg -filter_complex "drawtext=text=aaaaa" -r 25 -vcodec libx264 -preset veryfast -threads 8 -x264opts no-scenecut -b 850k -bt 850k -ac 2 -ab 32k -async 1 -y -f mp4 test.mp4
Give me result
Fontconfig error : Cannot load default config file : No such file : (null)
Abort trap

  


  With path to font file :
/usr/local/bin/ffmpeg -loop 1 -t 11.14 -i 3339861349.jpg -filter_complex "drawtext=text=aaaaa:fontfile=/usr/local/share/fonts/Roboto-Regular.ttf" -r 25 -vcodec libx264 -preset veryfast -threads 8 -x264opts no-scenecut -b 850k -bt 850k -ac 2 -ab 32k -async 1 -y -f mp4 test.mp4
Give me result
Abort trap

  


  Rebild ffmpeg with —enable-libfontconfig

  


  ffmpeg version 6.0-6.0 Copyright (c) 2000-2023 the FFmpeg developers
built with FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
configuration : —enable-gpl —enable-gmp —enable-gnutls —enable-libdav1d —enable-libsvtav1 —enable-librav1e —enable-libvmaf —enable-libx264 —enable-chromaprint —enable-libx265 —enable-libvpx —enable-libxvid —enable-libvidstab —enable-libaom —enable-libzimg —enable-libmodplug —enable-libsoxr —enable-libmysofa —enable-lv2 —enable-libopencore_amrnb —enable-libopencore_amrwb —enable-libmp3lame —enable-libopus —enable-libvorbis —enable-libtwolame —enable-libspeex —enable-lv2 —enable-libtheora —enable-librubberband —enable-libgme —enable-libwebp —enable-libzmq —enable-libfribidi —enable-libfontconfig —enable-libfreetype —enable-libass —enable-runtime-cpudetect —cc=cc —cxx=cpp —disable-ffplay —disable-debug —disable-doc —disable-shared —enable-pthreads —enable-static —enable-small —enable-version3 —extra-cflags='-static -I/usr/home/azureagent/vsts/_work/1/s/FFmpeg/workspace/include -I/usr/home/azureagent/vsts/_work/1/s/FFmpeg/workspace/include/lilv-0 -I/usr/home/azureagent/vsts/_work/1/s/FFmpeg/workspace/include/lilv-0' —extra-cxxflags='-static -static-libstdc++' —extra-ldexeflags= —extra-ldflags=-L/usr/home/azureagent/vsts/_work/1/s/FFmpeg/workspace/lib —extra-libs='-static -lc++ -ldl -lpthread -lm -lmd -lz -lfftw3' —pkgconfigdir=/usr/home/azureagent/vsts/_work/1/s/FFmpeg/workspace/lib/pkgconfig —pkg-config-flags=—static —prefix=/usr/home/azureagent/vsts/_work/1/s/FFmpeg/workspace/done/ —extra-version=6.0