Recherche avancée

Sur d’autres sites (12715)

• How can I mux a MKV and MKA file and get it to play in a browser ?

  28 juin 2017, par Robert

  I’m using ffmpeg to merge .mkv and .mka files into .mp4 files. My current command looks like this :

  ffmpeg -i video.mkv -i audio.mka output_path.mp4

  The audio and video files are pre-signed urls from Amazon S3. Even on a server with sufficient resources, this process is going very slowly. I’ve researched situations where you can tell ffmpeg to skip re-encoding each frame, but I think that in my situation it actually does need to re-encode each frame.

  I’ve downloaded 2 sample files to my macbook pro and have installed ffmpeg locally via homebrew. When I run the command

  ffmpeg -i video.mkv -i audio.mka -c copy output.mp4

  I get the following output :

  ffmpeg version 3.3.2 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with Apple LLVM version 8.1.0 (clang-802.0.42)
  
    configuration: --prefix=/usr/local/Cellar/ffmpeg/3.3.2 --enable-shared --enable-pthreads --enable-gpl --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-libmp3lame --enable-libx264 --enable-libxvid --enable-opencl --disable-lzma --enable-vda
  
    libavutil      55. 58.100 / 55. 58.100
  
    libavcodec     57. 89.100 / 57. 89.100
  
    libavformat    57. 71.100 / 57. 71.100
  
    libavdevice    57.  6.100 / 57.  6.100
  
    libavfilter     6. 82.100 /  6. 82.100
  
    libavresample   3.  5.  0 /  3.  5.  0
  
    libswscale      4.  6.100 /  4.  6.100
  
    libswresample   2.  7.100 /  2.  7.100
  
    libpostproc    54.  5.100 / 54.  5.100
  
  Input #0, matroska,webm, from '319_audio_1498590673766.mka':
  
    Metadata:
  
      encoder         : GStreamer matroskamux version 1.8.1.1
  
      creation_time   : 2017-06-27T19:10:58.000000Z
  
    Duration: 00:00:03.53, start: 2.831000, bitrate: 50 kb/s
  
      Stream #0:0(eng): Audio: opus, 48000 Hz, stereo, fltp (default)
  
      Metadata:
  
        title           : Audio
  
  Input #1, matroska,webm, from '319_video_1498590673766.mkv':
  
    Metadata:
  
      encoder         : GStreamer matroskamux version 1.8.1.1
  
      creation_time   : 2017-06-27T19:10:58.000000Z
  
    Duration: 00:00:03.97, start: 2.851000, bitrate: 224 kb/s
  
      Stream #1:0(eng): Video: vp8, yuv420p(progressive), 640x480, SAR 1:1 DAR 4:3, 30 tbr, 1k tbn, 1k tbc (default)
  
      Metadata:
  
        title           : Video
  
  [mp4 @ 0x7fa4f0806800] Could not find tag for codec vp8 in stream #0, codec not currently supported in container
  
  Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument
  
  Stream mapping:
  
    Stream #1:0 -> #0:0 (copy)
  
    Stream #0:0 -> #0:1 (copy)
  
      Last message repeated 1 times

  So it appears that the specific encodings I’m working with are vp8 videos and opus audio files, which I believe are incompatible with the .mp4 output container. I would appreciate answers that cover ways of optimally merging vp8 and opus into .mp4 output or answers that point me in the direction of output media formats that are both compatible with vp8 & opus and are playable on web and mobile devices so that I can bypass the re-encoding step altogether.

  EDIT :

  Just wanted to provide a benchmark after following LordNeckbeard’s advice :

  4 min 41 second video transcoded locally on my mac
  
  
  
  LordNeckbeard’s approach : 15 mins 55 seconds (955 seconds)
  
  Current approach : 18 mins 49 seconds (1129 seconds)
  
  
  
  18% speed increase

• What is the best way to merge .mkv and .mka files using ffmpeg ?

  28 juin 2017, par Robert

  I’m using ffmpeg to merge .mkv and .mka files into .mp4 files. My current command looks like this :

  ffmpeg -i video.mkv -i audio.mka output_path.mp4

  The audio and video files are pre-signed urls from Amazon S3. Even on a server with sufficient resources, this process is going very slowly. I’ve researched situations where you can tell ffmpeg to skip re-encoding each frame, but I think that in my situation it actually does need to re-encode each frame.

  I’ve downloaded 2 sample files to my macbook pro and have installed ffmpeg locally via homebrew. When I run the command

  ffmpeg -i video.mkv -i audio.mka -c copy output.mp4

  I get the following output :

  ffmpeg version 3.3.2 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with Apple LLVM version 8.1.0 (clang-802.0.42)
  
    configuration: --prefix=/usr/local/Cellar/ffmpeg/3.3.2 --enable-shared --enable-pthreads --enable-gpl --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-libmp3lame --enable-libx264 --enable-libxvid --enable-opencl --disable-lzma --enable-vda
  
    libavutil      55. 58.100 / 55. 58.100
  
    libavcodec     57. 89.100 / 57. 89.100
  
    libavformat    57. 71.100 / 57. 71.100
  
    libavdevice    57.  6.100 / 57.  6.100
  
    libavfilter     6. 82.100 /  6. 82.100
  
    libavresample   3.  5.  0 /  3.  5.  0
  
    libswscale      4.  6.100 /  4.  6.100
  
    libswresample   2.  7.100 /  2.  7.100
  
    libpostproc    54.  5.100 / 54.  5.100
  
  Input #0, matroska,webm, from '319_audio_1498590673766.mka':
  
    Metadata:
  
      encoder         : GStreamer matroskamux version 1.8.1.1
  
      creation_time   : 2017-06-27T19:10:58.000000Z
  
    Duration: 00:00:03.53, start: 2.831000, bitrate: 50 kb/s
  
      Stream #0:0(eng): Audio: opus, 48000 Hz, stereo, fltp (default)
  
      Metadata:
  
        title           : Audio
  
  Input #1, matroska,webm, from '319_video_1498590673766.mkv':
  
    Metadata:
  
      encoder         : GStreamer matroskamux version 1.8.1.1
  
      creation_time   : 2017-06-27T19:10:58.000000Z
  
    Duration: 00:00:03.97, start: 2.851000, bitrate: 224 kb/s
  
      Stream #1:0(eng): Video: vp8, yuv420p(progressive), 640x480, SAR 1:1 DAR 4:3, 30 tbr, 1k tbn, 1k tbc (default)
  
      Metadata:
  
        title           : Video
  
  [mp4 @ 0x7fa4f0806800] Could not find tag for codec vp8 in stream #0, codec not currently supported in container
  
  Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument
  
  Stream mapping:
  
    Stream #1:0 -> #0:0 (copy)
  
    Stream #0:0 -> #0:1 (copy)
  
      Last message repeated 1 times

  So it appears that the specific encodings I’m working with are vp8 videos and opus audio files, which I believe are incompatible with the .mp4 output container. I would appreciate answers that cover ways of optimally merging vp8 and opus into .mp4 output or answers that point me in the direction of output media formats that are both compatible with vp8 & opus and are playable on web and mobile devices so that I can bypass the re-encoding step altogether.

  EDIT :

  Just wanted to provide a benchmark after following LordNeckbeard’s advice :

  4 min 41 second video transcoded locally on my mac
  
  
  
  LordNeckbeard’s approach : 15 mins 55 seconds (955 seconds)
  
  Current approach : 18 mins 49 seconds (1129 seconds)
  
  
  
  18% speed increase

• FFMPEG "Segmentation fault" with stream source and watermark

  4 mars 2020, par Magikey

  I use release : 4.2.2 (static) from "https://johnvansickle.com/ffmpeg/"

  Final code will be on "Amazon AWS lambda"

  Goal : use a url stream and add watermak

  Link to video : ​https://feoval.fr/519.mp4

  Link to Watermak : ​https://feoval.fr/watermark.png

  ./ffmpeg -i "https://feoval.fr/519.mp4" -i "./watermark.png" -filter_complex "overlay=W-w-10:H-h-10:format=rgb" -f "mp4" -movflags "frag_keyframe+empty_moov" -pix_fmt "yuv420p" test.mp4

  return "Segmentation fault"

  I have the same error on my computer and on AWS Lambda server

  ./ffmpeg -i "https://feoval.fr/519.mp4" -f "mp4" -movflags "frag_keyframe+empty_moov" -pix_fmt "yuv420p" test.mp4

  work (but not watermak)

  ./ffmpeg -i "./519.mp4" -i "./watermark.png" -filter_complex "overlay=W-w-10:H-h-10:format=rgb" -f "mp4" -movflags "frag_keyframe+empty_moov" -pix_fmt "yuv420p" test.mp4

  work (but not with stream)

  Thanks you very much !

  Logs for the first case who return "Segmentation fault" :

  ...
  
  Stream mapping:
  
  Stream #0:0 (h264) -> overlay:main (graph 0)
  
  Stream #1:0 (png) -> overlay:overlay (graph 0)
  
  overlay (graph 0) -> Stream #0:0 (libx264)
  
  Stream #0:1 -> #0:1 (aac (native) -> aac (native))
  
  Press [q] to stop, ? for help
  
  [libx264 @ 0x742e480] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
  
  [libx264 @ 0x742e480] profile High, level 3.1, 4:2:0, 8-bit
  
  [libx264 @ 0x742e480] 264 - core 159 r2991 1771b55 - H.264/MPEG-4 AVC codec - Copyleft 2003-2019 - ​http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'test.mp4':
  
  Metadata:
  
  major_brand : mp42
  
  minor_version : 1
  
  compatible_brands: isommp41mp42
  
  encoder : Lavf58.29.100
  
  Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p, 480x848, q=-1--1, 30 fps, 15360 tbn, 30 tbc (default)
  
  Metadata:
  
  encoder : Lavc58.54.100 libx264
  
  Side data:
  
  cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 128 kb/s (default)
  
  Metadata:
  
  creation_time : 2020-01-13T08:54:26.000000Z
  
  handler_name : Core Media Audio
  
  encoder : Lavc58.54.100 aac
  
  Segmentation fault (core dumped)