Recherche avancée
Autres articles (56)
-
Websites made with MediaSPIP
2 mai 2011, parThis page lists some websites based on MediaSPIP.
-
Creating farms of unique websites
13 avril 2011, parMediaSPIP platforms can be installed as a farm, with a single "core" hosted on a dedicated server and used by multiple websites.
This allows (among other things) : implementation costs to be shared between several different projects / individuals rapid deployment of multiple unique sites creation of groups of like-minded sites, making it possible to browse media in a more controlled and selective environment than the major "open" (...) -
Support audio et vidéo HTML5
10 avril 2011MediaSPIP utilise les balises HTML5 video et audio pour la lecture de documents multimedia en profitant des dernières innovations du W3C supportées par les navigateurs modernes.
Pour les navigateurs plus anciens, le lecteur flash Flowplayer est utilisé.
Le lecteur HTML5 utilisé a été spécifiquement créé pour MediaSPIP : il est complètement modifiable graphiquement pour correspondre à un thème choisi.
Ces technologies permettent de distribuer vidéo et son à la fois sur des ordinateurs conventionnels (...)
Sur d’autres sites (7656)
-
FFMPEG + HW Acceleration + Kepler GPU Lossless encoding not supported ?
11 juillet 2022, par user2522885I'm curious about FFMPEG and GPU hardware acceleration. My Windows 10 system uses the Asus / nVidia GTX 760 graphics card and Intel i5-2500K CPU. My graphics card claims to be of the Kepler architecture with CUDA 3.0 as shown here.


Instead of going through the hassles of compiling FFMPEG with hw acceleration support i downloaded a pre-compiled binary from here and here.


Next, i tried running a test with hw acceleration options as recommended here :


ffmpeg -y -vsync 0 -hwaccel cuda -hwaccel_output_format cuda -i "input.mkv" -c:a copy -c:v h264_nvenc "output.mp4"


I then received the error message :


[h264_nvenc @ 000001c34eeda8c0] Lossless encoding not supported
[h264_nvenc @ 000001c34eeda8c0] Provided device doesn't support required NVENC features
Error initializing output stream 0:0 — Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height


What am i doing wrong ? For the record i install the CUDA setup file but it made no difference. I am using the latest nVidia drivers.


UPDATE


ffmpeg -h encoder=h264_nvenc


ffmpeg version 4.4-full_build-www.gyan.dev Copyright (c) 2000-2021 the FFmpeg developers
 built with gcc 10.2.0 (Rev6, Built by MSYS2 project)
 configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-lzma --enable-libsnappy --enable-zlib --enable-librist --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-libbluray --enable-libcaca --enable-sdl2 --enable-libdav1d --enable-libzvbi --enable-librav1e --enable-libsvtav1 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libaom --enable-libopenjpeg --enable-libvpx --enable-libass --enable-frei0r --enable-libfreetype --enable-libfribidi --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-libglslang --enable-vulkan --enable-opencl --enable-libcdio --enable-libgme --enable-libmodplug --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libshine --enable-libtheora --enable-libtwolame --enable-libvo-amrwbenc --enable-libilbc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-ladspa --enable-libbs2b --enable-libflite --enable-libmysofa --enable-librubberband --enable-libsoxr --enable-chromaprint
 libavutil 56. 70.100 / 56. 70.100
 libavcodec 58.134.100 / 58.134.100
 libavformat 58. 76.100 / 58. 76.100
 libavdevice 58. 13.100 / 58. 13.100
 libavfilter 7.110.100 / 7.110.100
 libswscale 5. 9.100 / 5. 9.100
 libswresample 3. 9.100 / 3. 9.100
 libpostproc 55. 9.100 / 55. 9.100
Encoder h264_nvenc [NVIDIA NVENC H.264 encoder]:
 General capabilities: dr1 delay hardware
 Threading capabilities: none
 Supported hardware devices: cuda cuda d3d11va d3d11va
 Supported pixel formats: yuv420p nv12 p010le yuv444p p016le yuv444p16le bgr0 rgb0 cuda d3d11
h264_nvenc AVOptions:
 -preset <int> E..V....... Set the encoding preset (from 0 to 18) (default p4)
 default 0 E..V.......
 slow 1 E..V....... hq 2 passes
 medium 2 E..V....... hq 1 pass
 fast 3 E..V....... hp 1 pass
 hp 4 E..V.......
 hq 5 E..V.......
 bd 6 E..V.......
 ll 7 E..V....... low latency
 llhq 8 E..V....... low latency hq
 llhp 9 E..V....... low latency hp
 lossless 10 E..V.......
 losslesshp 11 E..V.......
 p1 12 E..V....... fastest (lowest quality)
 p2 13 E..V....... faster (lower quality)
 p3 14 E..V....... fast (low quality)
 p4 15 E..V....... medium (default)
 p5 16 E..V....... slow (good quality)
 p6 17 E..V....... slower (better quality)
 p7 18 E..V....... slowest (best quality)
 -tune <int> E..V....... Set the encoding tuning info (from 1 to 4) (default hq)
 hq 1 E..V....... High quality
 ll 2 E..V....... Low latency
 ull 3 E..V....... Ultra low latency
 lossless 4 E..V....... Lossless
 -profile <int> E..V....... Set the encoding profile (from 0 to 3) (default main)
 baseline 0 E..V.......
 main 1 E..V.......
 high 2 E..V.......
 high444p 3 E..V.......
 -level <int> E..V....... Set the encoding level restriction (from 0 to 62) (default auto)
 auto 0 E..V.......
 1 10 E..V.......
 1.0 10 E..V.......
 1b 9 E..V.......
 1.0b 9 E..V.......
 1.1 11 E..V.......
 1.2 12 E..V.......
 1.3 13 E..V.......
 2 20 E..V.......
 2.0 20 E..V.......
 2.1 21 E..V.......
 2.2 22 E..V.......
 3 30 E..V.......
 3.0 30 E..V.......
 3.1 31 E..V.......
 3.2 32 E..V.......
 4 40 E..V.......
 4.0 40 E..V.......
 4.1 41 E..V.......
 4.2 42 E..V.......
 5 50 E..V.......
 5.0 50 E..V.......
 5.1 51 E..V.......
 5.2 52 E..V.......
 6.0 60 E..V.......
 6.1 61 E..V.......
 6.2 62 E..V.......
 -rc <int> E..V....... Override the preset rate-control (from -1 to INT_MAX) (default -1)
 constqp 0 E..V....... Constant QP mode
 vbr 1 E..V....... Variable bitrate mode
 cbr 2 E..V....... Constant bitrate mode
 vbr_minqp 8388612 E..V....... Variable bitrate mode with MinQP (deprecated)
 ll_2pass_quality 8388616 E..V....... Multi-pass optimized for image quality (deprecated)
 ll_2pass_size 8388624 E..V....... Multi-pass optimized for constant frame size (deprecated)
 vbr_2pass 8388640 E..V....... Multi-pass variable bitrate mode (deprecated)
 cbr_ld_hq 8388616 E..V....... Constant bitrate low delay high quality mode
 cbr_hq 8388624 E..V....... Constant bitrate high quality mode
 vbr_hq 8388640 E..V....... Variable bitrate high quality mode
 -rc-lookahead <int> E..V....... Number of frames to look ahead for rate-control (from 0 to INT_MAX) (default 0)
 -surfaces <int> E..V....... Number of concurrent surfaces (from 0 to 64) (default 0)
 -cbr <boolean> E..V....... Use cbr encoding mode (default false)
 -2pass <boolean> E..V....... Use 2pass encoding mode (default auto)
 -gpu <int> E..V....... Selects which NVENC capable GPU to use. First GPU is 0, second is 1, and so on. (from -2 to INT_MAX) (default any)
 any -1 E..V....... Pick the first device available
 list -2 E..V....... List the available devices
 -delay <int> E..V....... Delay frame output by the given amount of frames (from 0 to INT_MAX) (default INT_MAX)
 -no-scenecut <boolean> E..V....... When lookahead is enabled, set this to 1 to disable adaptive I-frame insertion at scene cuts (default false)
 -forced-idr <boolean> E..V....... If forcing keyframes, force them as IDR frames. (default false)
 -b_adapt <boolean> E..V....... When lookahead is enabled, set this to 0 to disable adaptive B-frame decision (default true)
 -spatial-aq <boolean> E..V....... set to 1 to enable Spatial AQ (default false)
 -spatial_aq <boolean> E..V....... set to 1 to enable Spatial AQ (default false)
 -temporal-aq <boolean> E..V....... set to 1 to enable Temporal AQ (default false)
 -temporal_aq <boolean> E..V....... set to 1 to enable Temporal AQ (default false)
 -zerolatency <boolean> E..V....... Set 1 to indicate zero latency operation (no reordering delay) (default false)
 -nonref_p <boolean> E..V....... Set this to 1 to enable automatic insertion of non-reference P-frames (default false)
 -strict_gop <boolean> E..V....... Set 1 to minimize GOP-to-GOP rate fluctuations (default false)
 -aq-strength <int> E..V....... When Spatial AQ is enabled, this field is used to specify AQ strength. AQ strength scale is from 1 (low) - 15 (aggressive) (from 1 to 15) (default 8)
 -cq <float> E..V....... Set target quality level (0 to 51, 0 means automatic) for constant quality mode in VBR rate control (from 0 to 51) (default 0)
 -aud <boolean> E..V....... Use access unit delimiters (default false)
 -bluray-compat <boolean> E..V....... Bluray compatibility workarounds (default false)
 -init_qpP <int> E..V....... Initial QP value for P frame (from -1 to 51) (default -1)
 -init_qpB <int> E..V....... Initial QP value for B frame (from -1 to 51) (default -1)
 -init_qpI <int> E..V....... Initial QP value for I frame (from -1 to 51) (default -1)
 -qp <int> E..V....... Constant quantization parameter rate control method (from -1 to 51) (default -1)
 -weighted_pred <int> E..V....... Set 1 to enable weighted prediction (from 0 to 1) (default 0)
 -coder <int> E..V....... Coder type (from -1 to 2) (default default)
 default -1 E..V.......
 auto 0 E..V.......
 cabac 1 E..V.......
 cavlc 2 E..V.......
 ac 1 E..V.......
 vlc 2 E..V.......
 -b_ref_mode <int> E..V....... Use B frames as references (from 0 to 2) (default disabled)
 disabled 0 E..V....... B frames will not be used for reference
 each 1 E..V....... Each B frame will be used for reference
 middle 2 E..V....... Only (number of B frames)/2 will be used for reference
 -a53cc <boolean> E..V....... Use A53 Closed Captions (if available) (default true)
 -dpb_size <int> E..V....... Specifies the DPB size used for encoding (0 means automatic) (from 0 to INT_MAX) (default 0)
 -multipass <int> E..V....... Set the multipass encoding (from 0 to 2) (default disabled)
 disabled 0 E..V....... Single Pass
 qres 1 E..V....... Two Pass encoding is enabled where first Pass is quarter resolution
 fullres 2 E..V....... Two Pass encoding is enabled where first Pass is full resolution
 -ldkfs <int> E..V....... Low delay key frame scale; Specifies the Scene Change frame size increase allowed in case of single frame VBV and CBR (from 0 to 255) (default 0)
</int></int></int></boolean></int></int></int></int></int></int></int></boolean></boolean></float></int></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></boolean></int></int></boolean></boolean></int></int></int></int></int></int></int>

-
FFMPEG Output File is Empty Nothing was Encoded (for a Picture) ?
4 mars 2023, par Sarah SzaboI have a strange issue effecting one of my programs that does bulk media conversions using ffmpeg from the command line, however this effects me using it directly from the shell as well :


ffmpeg -i INPUT.mkv -ss 0:30 -y -qscale:v 2 -frames:v 1 -f image2 -huffman optimal "OUTPUT.png"
fails every run with the error message :
Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)

This only happens with very specific videos, and seemingly no other videos. File type is usually .webm. These files have been downloaded properly (usually from yt-dlp), and I have tried re-downloading them just to verify their integrity.


One such file from a colleague was : https://www.dropbox.com/s/xkucr2z5ra1p2oh/Triggerheart%20Execlica%20OST%20%28Arrange%29%20-%20Crueltear%20Ending.mkv?dl=0


Is there a subtle issue with the command string ?


Notes :


removing
-huffman optimalhad no effect

moving
-ssto before-ihad no effect

removing
-f image2 had no effect

Full Log :


sarah@MidnightStarSign:~/Music/Playlists/Indexing/Indexing Temp$ ffmpeg -i Triggerheart\ Execlica\ OST\ \(Arrange\)\ -\ Crueltear\ Ending.mkv -ss 0:30 -y -qscale:v 2 -frames:v 1 -f image2 -huffman optimal "TEST.png"
ffmpeg version n5.1.2 Copyright (c) 2000-2022 the FFmpeg developers
 built with gcc 12.2.0 (GCC)
 configuration: --prefix=/usr --disable-debug --disable-static --disable-stripping --enable-amf --enable-avisynth --enable-cuda-llvm --enable-lto --enable-fontconfig --enable-gmp --enable-gnutls --enable-gpl --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libdav1d --enable-libdrm --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libiec61883 --enable-libjack --enable-libmfx --enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librav1e --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtheora --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxcb --enable-libxml2 --enable-libxvid --enable-libzimg --enable-nvdec --enable-nvenc --enable-opencl --enable-opengl --enable-shared --enable-version3 --enable-vulkan
 libavutil 57. 28.100 / 57. 28.100
 libavcodec 59. 37.100 / 59. 37.100
 libavformat 59. 27.100 / 59. 27.100
 libavdevice 59. 7.100 / 59. 7.100
 libavfilter 8. 44.100 / 8. 44.100
 libswscale 6. 7.100 / 6. 7.100
 libswresample 4. 7.100 / 4. 7.100
 libpostproc 56. 6.100 / 56. 6.100
[matroska,webm @ 0x55927f484740] Could not find codec parameters for stream 2 (Attachment: none): unknown codec
Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options
Input #0, matroska,webm, from 'Triggerheart Execlica OST (Arrange) - Crueltear Ending.mkv':
 Metadata:
 title : TriggerHeart Exelica PS2 & 360 Arrange ー 16 - Crueltear Ending
 PURL : https://www.youtube.com/watch?v=zJ0bEa_8xEg
 COMMENT : https://www.youtube.com/watch?v=zJ0bEa_8xEg
 ARTIST : VinnyVynce
 DATE : 20170905
 ENCODER : Lavf59.27.100
 Duration: 00:00:30.00, start: -0.007000, bitrate: 430 kb/s
 Stream #0:0(eng): Video: vp9 (Profile 0), yuv420p(tv, bt709), 720x720, SAR 1:1 DAR 1:1, 25 fps, 25 tbr, 1k tbn (default)
 Metadata:
 DURATION : 00:00:29.934000000
 Stream #0:1(eng): Audio: opus, 48000 Hz, stereo, fltp (default)
 Metadata:
 DURATION : 00:00:30.001000000
 Stream #0:2: Attachment: none
 Metadata:
 filename : cover.webp
 mimetype : image/webp
Codec AVOption huffman (Huffman table strategy) specified for output file #0 (TEST.png) has not been used for any stream. The most likely reason is either wrong type (e.g. a video option with no video streams) or that it is a private option of some encoder which was not actually used for any stream.
Stream mapping:
 Stream #0:0 -> #0:0 (vp9 (native) -> png (native))
Press [q] to stop, [?] for help
Output #0, image2, to 'TEST.png':
 Metadata:
 title : TriggerHeart Exelica PS2 & 360 Arrange ー 16 - Crueltear Ending
 PURL : https://www.youtube.com/watch?v=zJ0bEa_8xEg
 COMMENT : https://www.youtube.com/watch?v=zJ0bEa_8xEg
 ARTIST : VinnyVynce
 DATE : 20170905
 encoder : Lavf59.27.100
 Stream #0:0(eng): Video: png, rgb24, 720x720 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 25 fps, 25 tbn (default)
 Metadata:
 DURATION : 00:00:29.934000000
 encoder : Lavc59.37.100 png
frame= 0 fps=0.0 q=0.0 Lsize=N/A time=00:00:00.00 bitrate=N/A speed= 0x 
video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
Output file is empty, nothing was encoded (check -ss / -t / -frames parameters if used)


Manjaro OS System Specs :


System:
 Kernel: 6.1.12-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
 parameters: BOOT_IMAGE=/@/boot/vmlinuz-6.1-x86_64
 root=UUID=f11386cf-342d-47ac-84e6-484b7b2f377d rw rootflags=subvol=@
 radeon.modeset=1 nvdia-drm.modeset=1 quiet
 cryptdevice=UUID=059df4b4-5be4-44d6-a23a-de81135eb5b4:luks-disk
 root=/dev/mapper/luks-disk apparmor=1 security=apparmor
 resume=/dev/mapper/luks-swap udev.log_priority=3
 Desktop: KDE Plasma v: 5.26.5 tk: Qt v: 5.15.8 wm: kwin_x11 vt: 1 dm: SDDM
 Distro: Manjaro Linux base: Arch Linux
Machine:
 Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x
 serial: <superuser required="required"> UEFI: American Megatrends v: 4408
 date: 10/27/2022
Battery:
 Message: No system battery data found. Is one present?
Memory:
 RAM: total: 62.71 GiB used: 27.76 GiB (44.3%)
 RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
 Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
 level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
 model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
 Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
 L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB
 L3: 64 MiB desc: 2x32 MiB
 Speed (MHz): avg: 4099 high: 4111 min/max: 2200/6358 boost: disabled
 scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 4099 2: 4095
 3: 4102 4: 4100 5: 4097 6: 4100 7: 4110 8: 4111 9: 4083 10: 4099 11: 4100
 12: 4094 13: 4097 14: 4101 15: 4100 16: 4099 17: 4100 18: 4097 19: 4098
 20: 4095 21: 4100 22: 4099 23: 4099 24: 4105 25: 4098 26: 4100 27: 4100
 28: 4092 29: 4103 30: 4101 31: 4100 32: 4099 bogomips: 262520
 Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
 bmi2 bpext cat_l3 cdp_l3 clflush clflushopt clwb clzero cmov cmp_legacy
 constant_tsc cpb cpuid cqm cqm_llc cqm_mbm_local cqm_mbm_total
 cqm_occup_llc cr8_legacy cx16 cx8 de decodeassists erms extapic
 extd_apicid f16c flushbyasid fma fpu fsgsbase fsrm fxsr fxsr_opt ht
 hw_pstate ibpb ibrs ibs invpcid irperf lahf_lm lbrv lm mba mca mce
 misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl npt
 nrip_save nx ospke osvw overflow_recov pae pat pausefilter pclmulqdq
 pdpe1gb perfctr_core perfctr_llc perfctr_nb pfthreshold pge pku pni popcnt
 pse pse36 rapl rdpid rdpru rdrand rdseed rdt_a rdtscp rep_good sep sha_ni
 skinit smap smca smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 stibp succor
 svm svm_lock syscall tce topoext tsc tsc_scale umip v_spec_ctrl
 v_vmsave_vmload vaes vgif vmcb_clean vme vmmcall vpclmulqdq wbnoinvd wdt
 x2apic xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
 Vulnerabilities:
 Type: itlb_multihit status: Not affected
 Type: l1tf status: Not affected
 Type: mds status: Not affected
 Type: meltdown status: Not affected
 Type: mmio_stale_data status: Not affected
 Type: retbleed status: Not affected
 Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
 prctl
 Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
 sanitization
 Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
 STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
 Type: srbds status: Not affected
 Type: tsx_async_abort status: Not affected
Graphics:
 Device-1: NVIDIA GA104 [GeForce RTX 3070] vendor: ASUSTeK driver: nvidia
 v: 525.89.02 alternate: nouveau,nvidia_drm non-free: 525.xx+
 status: current (as of 2023-02) arch: Ampere code: GAxxx
 process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 8
 link-max: lanes: 16 bus-ID: 0b:00.0 chip-ID: 10de:2484 class-ID: 0300
 Device-2: AMD Cape Verde PRO [Radeon HD 7750/8740 / R7 250E]
 vendor: VISIONTEK driver: radeon v: kernel alternate: amdgpu arch: GCN-1
 code: Southern Islands process: TSMC 28nm built: 2011-20 pcie: gen: 3
 speed: 8 GT/s lanes: 8 link-max: lanes: 16 ports: active: DP-3,DP-4
 empty: DP-1, DP-2, DP-5, DP-6 bus-ID: 0c:00.0 chip-ID: 1002:683f
 class-ID: 0300 temp: 54.0 C
 Device-3: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo
 bus-ID: 9-2:3 chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>
 Display: x11 server: X.Org v: 21.1.7 with: Xwayland v: 22.1.8
 compositor: kwin_x11 driver: X: loaded: modesetting,nvidia dri: radeonsi
 gpu: radeon display-ID: :0 screens: 1
 Screen-1: 0 s-res: 5760x2160 s-dpi: 80 s-size: 1829x686mm (72.01x27.01")
 s-diag: 1953mm (76.91")
 Monitor-1: DP-1 pos: 1-2 res: 1920x1080 dpi: 93
 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A
 Monitor-2: DP-1-3 pos: 2-1 res: 1920x1080 dpi: 82
 size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
 Monitor-3: DP-1-4 pos: 1-1 res: 1920x1080 dpi: 93
 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A
 Monitor-4: DP-3 pos: primary,2-2 res: 1920x1080 dpi: 82
 size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
 Monitor-5: DP-4 pos: 2-4 res: 1920x1080 dpi: 82
 size: 598x336mm (23.54x13.23") diag: 686mm (27.01") modes: N/A
 Monitor-6: HDMI-0 pos: 1-3 res: 1920x1080 dpi: 93
 size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A
 API: OpenGL v: 4.6.0 NVIDIA 525.89.02 renderer: NVIDIA GeForce RTX
 3070/PCIe/SSE2 direct-render: Yes
Audio:
 Device-1: NVIDIA GA104 High Definition Audio vendor: ASUSTeK
 driver: snd_hda_intel bus-ID: 5-1:2 v: kernel chip-ID: 30be:1019 pcie:
 class-ID: 0102 gen: 4 speed: 16 GT/s lanes: 8 link-max: lanes: 16
 bus-ID: 0b:00.1 chip-ID: 10de:228b class-ID: 0403
 Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000
 Series] vendor: VISIONTEK driver: snd_hda_intel v: kernel pcie: gen: 3
 speed: 8 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 0c:00.1
 chip-ID: 1002:aab0 class-ID: 0403
 Device-3: AMD Starship/Matisse HD Audio vendor: ASUSTeK
 driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
 bus-ID: 0e:00.4 chip-ID: 1022:1487 class-ID: 0403
 Device-4: Schiit Audio Unison Universal Dac type: USB driver: snd-usb-audio
 Device-5: JMTek LLC. Plugable USB Audio Device type: USB
 driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-2:3 chip-ID: 0c76:120b
 class-ID: 0300 serial: <filter>
 Device-6: ASUSTek ASUS AI Noise-Cancelling Mic Adapter type: USB
 driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-4:4 chip-ID: 0b05:194e
 class-ID: 0300 serial: <filter>
 Device-7: Microdia USB 2.0 Camera type: USB driver: snd-usb-audio,uvcvideo
 bus-ID: 9-2:3 chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>
 Sound API: ALSA v: k6.1.12-1-MANJARO running: yes
 Sound Interface: sndio v: N/A running: no
 Sound Server-1: PulseAudio v: 16.1 running: no
 Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
 Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
 pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 07:00.0
 chip-ID: 8086:1539 class-ID: 0200
 IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
 IP v4: <filter> type: dynamic noprefixroute scope: global
 broadcast: <filter>
 IP v6: <filter> type: noprefixroute scope: link
 IF-ID-1: docker0 state: down mac: <filter>
 IP v4: <filter> scope: global broadcast: <filter>
 WAN IP: <filter>
Bluetooth:
 Device-1: Cambridge Silicon Radio Bluetooth Dongle (HCI mode) type: USB
 driver: btusb v: 0.8 bus-ID: 5-5.3:7 chip-ID: 0a12:0001 class-ID: e001
 Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends
Logical:
 Message: No logical block device data found.
 Device-1: luks-c847cf9f-c6b5-4624-a25e-4531e318851a maj-min: 254:2
 type: LUKS dm: dm-2 size: 3.64 TiB
 Components:
 p-1: sda1 maj-min: 8:1 size: 3.64 TiB
 Device-2: luks-swap maj-min: 254:1 type: LUKS dm: dm-1 size: 12 GiB
 Components:
 p-1: nvme0n1p2 maj-min: 259:2 size: 12 GiB
 Device-3: luks-disk maj-min: 254:0 type: LUKS dm: dm-0 size: 919.01 GiB
 Components:
 p-1: nvme0n1p3 maj-min: 259:3 size: 919.01 GiB
RAID:
 Message: No RAID data found.
Drives:
 Local Storage: total: 9.1 TiB used: 2.79 TiB (30.6%)
 SMART Message: Unable to run smartctl. Root privileges required.
 ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
 model: WDS100T3X0C-00SJG0 size: 931.51 GiB block-size: physical: 512 B
 logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
 rev: 111110WD temp: 53.9 C scheme: GPT
 ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Western Digital
 model: WDS100T2B0C-00PXH0 size: 931.51 GiB block-size: physical: 512 B
 logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
 rev: 211070WD temp: 46.9 C scheme: GPT
 ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital
 model: WD4005FZBX-00K5WB0 size: 3.64 TiB block-size: physical: 4096 B
 logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
 rev: 1A01 scheme: GPT
 ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital
 model: WD4005FZBX-00K5WB0 size: 3.64 TiB block-size: physical: 4096 B
 logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter>
 rev: 1A01 scheme: GPT
 ID-5: /dev/sdc maj-min: 8:32 type: USB vendor: SanDisk
 model: Gaming Xbox 360 size: 7.48 GiB block-size: physical: 512 B
 logical: 512 B type: N/A serial: <filter> rev: 8.02 scheme: MBR
 SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
 Message: No optical or floppy data found.
Partition:
 ID-1: / raw-size: 919.01 GiB size: 919.01 GiB (100.00%)
 used: 611.14 GiB (66.5%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
 mapped: luks-disk label: N/A uuid: N/A
 ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
 used: 40.2 MiB (7.9%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: EFI
 uuid: 8922-E04D
 ID-3: /home raw-size: 919.01 GiB size: 919.01 GiB (100.00%)
 used: 611.14 GiB (66.5%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
 mapped: luks-disk label: N/A uuid: N/A
 ID-4: /run/media/sarah/ConvergentRefuge raw-size: 3.64 TiB
 size: 3.64 TiB (100.00%) used: 2.19 TiB (60.1%) fs: btrfs dev: /dev/dm-2
 maj-min: 254:2 mapped: luks-c847cf9f-c6b5-4624-a25e-4531e318851a
 label: ConvergentRefuge uuid: 7d295e73-4143-4eb1-9d22-75a06b1d2984
 ID-5: /run/media/sarah/MSS_EXtended raw-size: 475.51 GiB
 size: 475.51 GiB (100.00%) used: 1.48 GiB (0.3%) fs: btrfs
 dev: /dev/nvme1n1p1 maj-min: 259:5 label: MSS EXtended
 uuid: f98b3a12-e0e4-48c7-91c2-6e3aa6dcd32c
Swap:
 Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
 ID-1: swap-1 type: partition size: 12 GiB used: 6.86 GiB (57.2%)
 priority: -2 dev: /dev/dm-1 maj-min: 254:1 mapped: luks-swap label: SWAP
 uuid: c8991364-85a7-4e6c-8380-49cd5bd7a873
Unmounted:
 ID-1: /dev/nvme1n1p2 maj-min: 259:6 size: 456 GiB fs: ntfs label: N/A
 uuid: 5ECA358FCA356485
 ID-2: /dev/sdb1 maj-min: 8:17 size: 3.64 TiB fs: ntfs
 label: JerichoVariance uuid: 1AB22D5664889CBD
 ID-3: /dev/sdc1 maj-min: 8:33 size: 3.57 GiB fs: iso9660
 ID-4: /dev/sdc2 maj-min: 8:34 size: 4 MiB fs: vfat label: MISO_EFI
 uuid: 5C67-4BF8
USB:
 Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
 Hub-2: 1-2:2 info: Hitachi ports: 4 rev: 2.1 speed: 480 Mb/s
 chip-ID: 045b:0209 class-ID: 0900
 Device-1: 1-2.4:3 info: Microsoft Xbox One Controller (Firmware 2015)
 type: <vendor specific="specific"> driver: xpad interfaces: 3 rev: 2.0 speed: 12 Mb/s
 power: 500mA chip-ID: 045e:02dd class-ID: ff00 serial: <filter>
 Hub-3: 2-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s
 chip-ID: 1d6b:0003 class-ID: 0900
 Hub-4: 2-2:2 info: Hitachi ports: 4 rev: 3.0 speed: 5 Gb/s
 chip-ID: 045b:0210 class-ID: 0900
 Hub-5: 3-0:1 info: Hi-speed hub with single TT ports: 1 rev: 2.0
 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
 Hub-6: 3-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s
 power: 100mA chip-ID: 2109:3431 class-ID: 0900
 Hub-7: 3-1.2:3 info: VIA Labs VL813 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
 chip-ID: 2109:2813 class-ID: 0900
 Hub-8: 4-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s
 chip-ID: 1d6b:0003 class-ID: 0900
 Hub-9: 4-2:2 info: VIA Labs VL813 Hub ports: 4 rev: 3.0 speed: 5 Gb/s
 chip-ID: 2109:0813 class-ID: 0900
 Hub-10: 5-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
 Device-1: 5-1:2 info: Schiit Audio Unison Universal Dac type: Audio
 driver: snd-usb-audio interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
 chip-ID: 30be:1019 class-ID: 0102
 Device-2: 5-2:3 info: JMTek LLC. Plugable USB Audio Device type: Audio,HID
 driver: hid-generic,snd-usb-audio,usbhid interfaces: 4 rev: 1.1
 speed: 12 Mb/s power: 100mA chip-ID: 0c76:120b class-ID: 0300
 serial: <filter>
 Device-3: 5-4:4 info: ASUSTek ASUS AI Noise-Cancelling Mic Adapter
 type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 4
 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 0b05:194e class-ID: 0300
 serial: <filter>
 Hub-11: 5-5:5 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
 power: 100mA chip-ID: 05e3:0608 class-ID: 0900
 Device-1: 5-5.3:7 info: Cambridge Silicon Radio Bluetooth Dongle (HCI mode)
 type: Bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s
 power: 100mA chip-ID: 0a12:0001 class-ID: e001
 Hub-12: 5-6:6 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
 power: 100mA chip-ID: 05e3:0608 class-ID: 0900
 Hub-13: 6-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
 chip-ID: 1d6b:0003 class-ID: 0900
 Hub-14: 7-0:1 info: Hi-speed hub with single TT ports: 6 rev: 2.0
 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
 Device-1: 7-2:2 info: SanDisk Cruzer Micro Flash Drive type: Mass Storage
 driver: usb-storage interfaces: 1 rev: 2.0 speed: 480 Mb/s power: 200mA
 chip-ID: 0781:5151 class-ID: 0806 serial: <filter>
 Device-2: 7-4:3 info: ASUSTek AURA LED Controller type: HID
 driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 16mA
 chip-ID: 0b05:18f3 class-ID: 0300 serial: <filter>
 Hub-15: 8-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
 chip-ID: 1d6b:0003 class-ID: 0900
 Hub-16: 9-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0
 speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
 Hub-17: 9-1:2 info: Terminus FE 2.1 7-port Hub ports: 7 rev: 2.0
 speed: 480 Mb/s power: 100mA chip-ID: 1a40:0201 class-ID: 0900
 Device-1: 9-1.1:4 info: Sunplus Innovation Gaming mouse [Philips SPK9304]
 type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s
 power: 98mA chip-ID: 1bcf:08a0 class-ID: 0301
 Device-2: 9-1.5:6 info: Microdia Backlit Gaming Keyboard
 type: Keyboard,Mouse driver: hid-generic,usbhid interfaces: 2 rev: 2.0
 speed: 12 Mb/s power: 400mA chip-ID: 0c45:652f class-ID: 0301
 Device-3: 9-1.6:7 info: HUION H420 type: Mouse,HID driver: uclogic,usbhid
 interfaces: 3 rev: 1.1 speed: 12 Mb/s power: 100mA chip-ID: 256c:006e
 class-ID: 0300
 Hub-18: 9-1.7:8 info: Terminus Hub ports: 4 rev: 2.0 speed: 480 Mb/s
 power: 100mA chip-ID: 1a40:0101 class-ID: 0900
 Device-1: 9-2:3 info: Microdia USB 2.0 Camera type: Video,Audio
 driver: snd-usb-audio,uvcvideo interfaces: 4 rev: 2.0 speed: 480 Mb/s
 power: 500mA chip-ID: 0c45:6367 class-ID: 0102 serial: <filter>
 Device-2: 9-4:11 info: VKB-Sim © Alex Oz 2021 VKBsim Gladiator EVO L
 type: HID driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s
 power: 500mA chip-ID: 231d:0201 class-ID: 0300
 Hub-19: 10-0:1 info: Super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
 chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
 System Temperatures: cpu: 38.0 C mobo: 41.0 C
 Fan Speeds (RPM): fan-1: 702 fan-2: 747 fan-3: 938 fan-4: 889 fan-5: 3132
 fan-6: 0 fan-7: 0
 GPU: device: nvidia screen: :0.0 temp: 49 C fan: 0% device: radeon
 temp: 53.0 C
Info:
 Processes: 842 Uptime: 3h 11m wakeups: 0 Init: systemd v: 252
 default: graphical tool: systemctl Compilers: gcc: 12.2.1 alt: 10/11
 clang: 15.0.7 Packages: 2158 pm: pacman pkgs: 2110 libs: 495 tools: pamac,yay
 pm: flatpak pkgs: 31 pm: snap pkgs: 17 Shell: Bash v: 5.1.16
 running-in: yakuake inxi: 3.3.25
</filter></filter></filter></filter></filter></filter></vendor></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></filter></superuser>

-
FFmpeg - how to set output sample_size
23 décembre 2019, par DennisJTrying to create a simple command line player for .dsf (DSD audio) files, and output to an alsa device that supports up to 24-bit 192 kHz sample rate. The following command almost works and it does play the track. Examining the bold text below, the dsf input file is converted to 24-bit/192 kHz, but the output is then truncated to 16-bit 192 kHz (pcm_s16le i.e, 16 bit little endian).
ffmpeg -i ’01 - Sweet Georgia Brown.dsf’ -f alsa hw:0,0
After displaying the ffmpeg banner and song metadata (tags), here is the result, bold is my emphasis :
Duration : 00:05:14.83, start : 0.000000, bitrate : 9234 kb/s
Stream #0:0 : Audio : flac, 192000 Hz, stereo, s32 (24 bit)
Stream mapping :
Stream #0:0 -> #0:0 (flac (native) -> pcm_s16le (native))
Press [q] to stop, [?] for help
Output #0, alsa, to ’hw:0,0’ :Since I can play this and many other tracks at full resolution using another player (foobar2000) it seems there might be an option in the encoder which is part of FFmpeg : Lavf57.83.100 I can find no information in any of the FFmpeg documentation that helps. Tried finding options in FFplay and even guessing using other FFmpeg options like this example.
ffmpeg -sample_fmt s24 -i ’01 - Sweet Georgia Brown.dsf’ -f alsa hw:0,0 ***** same results.I’m stuck. Any suggestions ?
Environment : Linux Mint 19.2, 64-bit, ASUS Xonar STXii sound card.
Syndiquer tout le site
