Recherche avancée

Sur d’autres sites (7784)

• Ffmpeg configuration to stream the frames of my webcam

  6 juillet 2023, par Ridweng

  I'm trying to build a server in NodeJs to stream in RTSP my webcam using Angular to retrieve the frames and connecting using websockets. The server side is using "express-ws" module to create the Websocket.

  


  I was successfull in sending the frames from the webcam to the server in base64, the server is receiving these messages from a function on interval of (1000 / 30)ms.

  


  The issue relies on the implementation of my Ffmpeg child process. I retrieve the message and convert it into a buffer to then write this in the function of Ffmpeg.

  


  My current implementation is this one :

  


  const { spawn } = require('child_process');
exports.stream =  (ws ,req) => {
    try{
        const mess = `connection from: ${req._remoteAddress} at ${req._startTime}.`
        const initialMess =`Started ${mess}`
        ws.uuid = uuidv4()
        console.log(initialMess)

        ws.on('message', function incoming(message) {
            message = JSON.parse(message)
            console.log(`Res: ${message.width} x ${message.height}`);
            const ffmpeg = spawn('ffmpeg', [
                '-f', 'rawvideo',
                '-pixel_format', 'rgb24',
                '-video_size', `${message.width}x${message.height}`,
                '-framerate', `${message.framerate}`,
                '-i', '-',
                '-codec:v', 'libx264',
                '-preset', 'ultrafast',
                '-tune', 'zerolatency',
                '-f', 'rtsp',
                'rtsp://127.0.0.1:554/rtsp/stream',
            ]);
            const base64Data = message.video;
            const videoData = Buffer.from(base64Data, 'base64');

            ffmpeg.stdin.write(videoData);
            ffmpeg.stdin.end();
            
            ffmpeg.stderr.on('data', (data) => {
                console.error(`FFmpeg : ${data}`);
                });

            ffmpeg.on('exit', (code, signal) => {
                if (dev) console.log(`FFmpeg process exited with code ${code} and signal ${signal}`);
        
                // Close the WebSocket connection
                ws.close();
                });
        });
        ws.on('close', () => {
            const finalMess = `Stopped ${mess}`
            rem(ws.uuid)
            console.log(finalMess)
        })
    }catch(err){
        console.log(err)
    }
}


  


  In terms of the message received, this is the Angular side sending the message :

  


  const imageData = this.canvas.toDataURL('image/jpeg');
socket.send(JSON.stringify({video: imageData, width: this.canvas.width, height: this.canvas.height, framerate: interval }));


  


  The interval variable is the divisor of the interval that is triggering the function (in this case 30).

  


  I'm currently receiving the error message from Ffmpeg :

  


  ffmpeg version 6.0 Copyright (c) 2000-2023 the FFmpeg developers
  built with Apple clang version 14.0.3 (clang-1403.0.22.14.1)

FFmpeg :   configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/6.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      58.  2.100 / 58.  2.100
  libavcodec     60.  3.100 / 60.  3.100
  libavformat    60.  3.100 / 60.  3.100
  libavdevice    60.  1.100 / 60.  1.100
  libavfilter     9.  3.100 /  9.  3.100
  libswscale      7.  1.100 /  7.  1.100
  libswresample   4. 10.100 /  4. 10.100
  libpostproc    57.  1.100 / 57.  1.100

FFmpeg : [rawvideo @ 0x150005ff0] Packet corrupt (stream = 0, dts = 0).

FFmpeg : Input #0, rawvideo, from 'fd:':
  Duration: N/A, start: 0.000000, bitrate: 221184 kb/s
  Stream #0:0: Video: rawvideo (RGB[24] / 0x18424752), rgb24, 640x480, 221184 kb/s, 30 tbr, 30 tbn

FFmpeg : Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))

FFmpeg : fd:: corrupt input packet in stream 0
[rawvideo @ 0x14ef24290] Invalid buffer size, packet size 76343 < expected frame_size 921600

FFmpeg : Error while decoding stream #0:0: Invalid argument

FFmpeg : [libx264 @ 0x14ef25a20] using cpu capabilities: ARMv8 NEON

FFmpeg : [libx264 @ 0x14ef25a20] profile High 4:4:4 Predictive, level 3.0, 4:4:4, 8-bit

FFmpeg : [libx264 @ 0x14ef25a20] 264 - core 164 r3095 baee400 - H.264/MPEG-4 AVC codec - Copyleft 2003-2022 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=6 threads=7 lookahead_threads=7 sliced_threads=1 slices=7 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=0

FFmpeg : [tcp @ 0x1500078a0] Connection to tcp://127.0.0.1:554?timeout=0 failed: Connection refused
[out#0/rtsp @ 0x14ef24b00] Could not write header (incorrect codec parameters ?): Connection refused

FFmpeg : [vost#0:0/libx264 @ 0x14ef256d0] Error initializing output stream: 

FFmpeg : Conversion failed!

FFmpeg process exited with code 1 and signal null


  


  This is the reason I believe the issue relies on the configuration of Ffmpeg and how to set it for this case. It would be great to being able to play this RTSP link in my VLC to conclude it as successfull.

  


  I would apreciate any suggestions or guidence.
Thanks in advance.

  


• Invalid data found when processing input for mp3 file in ffmpeg

  15 juillet 2023, par Sai Chaithanya

  My custom compiled FFmpeg build is unable to read mp3 files, suddenly. Interestingly, the custom compiled FFmpeg build generated the mp3 file. For the past 1 year, it was successfully reading the file. I checked with the official FFmpeg build, and it works, so at least the file is not corrupted.

  


  Official FFmpeg Build output :

  


  ffmpeg version 6.0 Copyright (c) 2000-2023 the FFmpeg developers
built with gcc 11 (Ubuntu 11.3.0-1ubuntu1~22.04.1)
configuration: --arch=x86_64 --target-os=linux --disable-network --enable-small --disable-doc 
               --disable-manpages --enable-static --disable-shared --disable-ffprobe 
               --disable-ffplay --enable-lto --prefix=/home/greninja/Downloads/custom_build 
               --extra-cflags='-I/home/greninja/Downloads/custom_build/include -O3 -flto' 
               --extra-ldflags=-L/home/greninja/Downloads/custom_build/lib
libavutil      58.  2.100 / 58.  2.100
libavcodec     60.  3.100 / 60.  3.100
libavformat    60.  3.100 / 60.  3.100
libavdevice    60.  1.100 / 60.  1.100
libavfilter     9.  3.100 /  9.  3.100
libswscale      7.  1.100 /  7.  1.100
libswresample   4. 10.100 /  4. 10.100
Input #0, mp3, from './test.mp3':
  Metadata:
    major_brand     : dash
    minor_version   : 0
    compatible_brands: iso6mp41
    encoder         : Lavf59.33.100
Duration: 00:03:07.09, start: 0.025057, bitrate: 192 kb/s
Stream #0:0: Audio: mp3, 44100 Hz, stereo, fltp, 192 kb/s
  Metadata:
    encoder         : Lavc59.46
At least one output file must be specified


  


  My Custom FFmpeg build output :

  


  ffmpeg version N-108341-gb1a68127bb Copyright (c) 2000-2022 the FFmpeg developers
built with gcc 9 (Ubuntu 9.4.0-1ubuntu1~20.04.1)
configuration: --arch=x86_64 --target-os=linux --disable-everything --disable-network 
               --disable-autodetect --enable-small --disable-debug --disable-doc 
               --disable-manpages --enable-static --disable-shared 
               --enable-decoder='aac*,ac3*,opus,vorbis,mjpeg' 
               --enable-demuxer='mov,m4v,matroska,image2' --enable-protocol=file 
               --enable-muxer='mp3,mp4,webm,null' --enable-libmp3lame 
               --enable-encoder=libmp3lame --enable-filter=aresample --enable-logging 
               --enable-pthreads --enable-parser='vorbis,opus,vp9,vp8,mpegaudio,mpegvideo,mpeg4video,ac3*,aac*,mjpeg,h264' 
               --disable-ffprobe --disable-ffplay --enable-lto 
               --prefix=/home/wade/Downloads/custom_build 
               --extra-cflags='-I/home/wade/Downloads/custom_build/include -O3 -flto' 
               --extra-ldflags=-L/home/wade/Downloads/custom_build/lib
libavutil      57. 36.102 / 57. 36.102
libavcodec     59. 46.100 / 59. 46.100
libavformat    59. 33.100 / 59. 33.100
libavdevice    59.  8.101 / 59.  8.101
libavfilter     8. 49.100 /  8. 49.100
libswscale      6.  8.112 /  6.  8.112
libswresample   4.  9.100 /  4.  9.100
./test.mp3: Invalid data found when processing input


  


  What configuration am I missing ?

  


• FFmpeg help, how should I use FFmpeg ? [closed]

  11 septembre 2023, par Señor Tonto

  I'm trying to use FFmpeg in my code, which is a C++ win32 application that I'm coding from Visual Studio Code 2022. I've downloaded FFmpeg from the BtnB Github that they link in their offical site as a pre-built binary. Now, I got the shared version, as I believed this would both have the command-line .exe app & the normal code headers & libraries. I tried using some code inside of my main.cpp to decode frames from .mp4 files as a test. For some reason though, on launch I got these errors : avcodec-60.dll cannot be found, avformat-60.dll cannot be found, avutil-58.dll cannot be found, swscale-7.dll cannot be found. So now I'm wondering why aren't these provided in the shared code ? there are only dll.a files but no actual .dll files, I also found .def files with the names of the .dll files I am apparently missing, now I want to know why these .dll files aren't provided. Do I need to build from source for that ? Or should I just forget using the .h & .lib files of FFmpeg & use the command-line app ? Any help appreciated.

  


  I want to use FFmpeg, but I can't find any guidance as to whether to use the command-line tool or the code function that aren't working due to the absent .dll filess