Sur d’autres sites (8168)

• Unrecognized option '-enable-libx264'. Error splitting the argument list : Option not found

  9 mars 2020, par DigM

  I’m trying to stream MP4 videos from my server to YouTube and so I installed FFMPEG version. When I then look at the configuration of FFMPEG, I am then presented with the following :

  ffmpeg version 3.3.6 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with gcc 4.9.2 (Debian 4.9.2-10)
  
    configuration: --enable-cross-compile --arch=i686 --target-os=linux --disable-yasm --disable-static --enable-shared --enable-gpl --enable-libmp3lame --enable-libx264 --enable-libsoxr --enable-version3 --enable-nonfree --enable-openssl --disable-decoder=ac3 --disable-decoder=ac3_fixed --disable-decoder=eac3 --disable-decoder=dca --disable-decoder=truehd --disable-encoder=ac3 --disable-encoder=ac3_fixed --disable-encoder=eac3 --disable-encoder=dca --disable-decoder=hevc --disable-decoder=hevc_cuvid --disable-encoder=hevc_nvenc --disable-encoder=nvenc_hevc --extra-ldflags='-L/root/daily_build/64_05/4.4.1/LinkFS/usr/lib -L/root/daily_build/64_05/4.4.1/Model/TS-X72/build/RootFS/usr/local/medialibrary/lib -Wl,--rpath -Wl,/usr/local/medialibrary/lib' --extra-cflags='-I/root/daily_build/64_05/4.4.1/LinkFS/usr/include -I/root/daily_build/64_05/4.4.1/Model/TS-X72/build/RootFS/usr/local/medialibrary/include -D_GNU_SOURCE -DQNAP' --prefix=/root/daily_build/64_05/4.4.1/Model/TS-X72/build/RootFS/usr/local/medialibrary
  
    libavutil      55. 58.100 / 55. 58.100
  
    libavcodec     57. 89.100 / 57. 89.100
  
    libavformat    57. 71.100 / 57. 71.100
  
    libavdevice    57.  6.100 / 57.  6.100
  
    libavfilter     6. 82.100 /  6. 82.100
  
    libswscale      4.  6.100 /  4.  6.100
  
    libswresample   2.  7.100 /  2.  7.100
  
    libpostproc    54.  5.100 / 54.  5.100

  However, when I then try

  ffmpeg ---enable-libx264

  I then get an error saying :

  Unrecognized option '--enable-libx264'.
  
  Error splitting the argument list: Option not found

  Do I need to change the configuaration of FFMPEG somehow or run another configuration option first or is there just something wrong with my call to enable libx264 ?

• Files created with "ffmpeg hevc_nvenc" do not play on TV. (with video codec SDK 9.1 of nvidia)

  29 janvier 2020, par Dashhh

  Problem

  • Files created with hevc_nvenc do not play on TV. (samsung smart tv, model unknown)
    Related to my ffmpeg build is below.

  FFmpeg build conf

  $ ffmpeg -buildconf
  
      --enable-cuda
  
      --enable-cuvid
  
      --enable-nvenc
  
      --enable-nonfree
  
      --enable-libnpp
  
      --extra-cflags=-I/path/cuda/include
  
      --extra-ldflags=-L/path/cuda/lib64
  
      --prefix=/prefix/ffmpeg_build
  
      --pkg-config-flags=--static
  
      --extra-libs='-lpthread -lm'
  
      --extra-cflags=-I/prefix/ffmpeg_build/include
  
      --extra-ldflags=-L/prefix/ffmpeg_build/lib
  
      --enable-gpl
  
      --enable-nonfree
  
      --enable-version3
  
      --disable-stripping
  
      --enable-avisynth
  
      --enable-libass
  
      --enable-libfontconfig
  
      --enable-libfreetype
  
      --enable-libfribidi
  
      --enable-libgme
  
      --enable-libgsm
  
      --enable-librubberband
  
      --enable-libshine
  
      --enable-libsnappy
  
      --enable-libssh
  
      --enable-libtwolame
  
      --enable-libwavpack
  
      --enable-libzvbi
  
      --enable-openal
  
      --enable-sdl2
  
      --enable-libdrm
  
      --enable-frei0r
  
      --enable-ladspa
  
      --enable-libpulse
  
      --enable-libsoxr
  
      --enable-libspeex
  
      --enable-avfilter
  
      --enable-postproc
  
      --enable-pthreads
  
      --enable-libfdk-aac
  
      --enable-libmp3lame
  
      --enable-libopus
  
      --enable-libtheora
  
      --enable-libvorbis
  
      --enable-libvpx
  
      --enable-libx264
  
      --enable-libx265
  
      --disable-ffplay
  
      --enable-libopenjpeg
  
      --enable-libwebp
  
      --enable-libxvid
  
      --enable-libvidstab
  
      --enable-libopenh264
  
      --enable-zlib
  
      --enable-openssl

  ---

  ffmpeg Command

  • Command about FFmpeg encoding

  ffmpeg -ss 1800 -vsync 0 -hwaccel cuvid -hwaccel_device 0 \
  
  -c:v h264_cuvid -i /data/input.mp4 -t 10 \
  
  -filter_complex "\
  
  [0:v]hwdownload,format=nv12,format=yuv420p,\
  
  scale=iw*2:ih*2" -gpu 0 -c:v hevc_nvenc -pix_fmt yuv444p16le -preset slow -rc cbr_hq -b:v 5000k -maxrate 7000k -bufsize 1000k -acodec aac -ac 2 -dts_delta_threshold 1000 -ab 128k -flags global_header ./makevideo_nvenc_hevc.mp4

  Full log about This Command - check this full log

  The reason for adding "-color_ " in the command is as follows.

  • HDR video after creating bt2020 + smpte2084 video using nvidia hardware accelerator. (I’m studying to make HDR videos. I’m not sure if this is right.)

  How can I make a video using ffmpeg hevc_nvenc and have it play on TV ?

  ---

  Things i’ve done

  Here’s what I’ve researched about why it doesn’t work.
   The header information is not properly included in the resulting video file. So I used a program called nvhsp to add SEI and VUI information inside the video. See below for the commands and logs used.

  nvhsp is open source for writing VUI and SEI bitstrings in raw video. nvhsp link

  # make rawvideo for nvhsp
  
  $  ffmpeg -vsync 0 -hwaccel cuvid -hwaccel_device 0 -c:v h264_cuvid \
  
  -i /data/input.mp4 -t 10 \
  
  -filter_complex "[0:v]hwdownload,format=nv12,\
  
  format=yuv420p,scale=iw*2:ih*2" \
  
  -gpu 0 -c:v hevc_nvenc -f rawvideo output_for_nvhsp.265
  
  
  
  # use nvhsp
  
  $ python nvhsp.py ./output_for_nvhsp.265 -colorprim bt2020 \
  
  -transfer smpte-st-2084 -colormatrix bt2020nc \
  
  -maxcll "1000,300" -videoformat ntsc -full_range tv \
  
  -masterdisplay "G (13250,34500) B (7500,3000 ) R (34000,16000) WP (15635,16450) L (10000000,1)" \
  
  ./after_nvhsp_proc_output.265
  
  
  
  Parsing the infile:
  
  
  
  ==========================
  
  
  
  Prepending SEI data
  
  Starting new SEI NALu ...
  
  SEI message with MaxCLL = 1000 and MaxFall = 300 created in SEI NAL
  
  SEI message Mastering Display Data G (13250,34500) B (7500,3000) R (34000,16000) WP (15635,16450) L (10000000,1) created in SEI NAL
  
  Looking for SPS ......... [232, 22703552]
  
  SPS_Nals_addresses [232, 22703552]
  
  SPS NAL Size 488
  
  Starting reading SPS NAL contents
  
  Reading of SPS NAL finished. Read 448 of SPS NALu data.
  
  
  
  Making modified SPS NALu ...
  
  Made modified SPS NALu-OK
  
  New SEI prepended
  
  Writing new stream ...
  
  Progress: 100%
  
  =====================
  
  Done!
  
  
  
  File nvhsp_after_output.mp4 created.
  
  
  
  # after process
  
  $ ffmpeg -y -f rawvideo -r 25 -s 3840x2160 -pix_fmt yuv444p16le -color_primaries bt2020 -color_trc smpte2084  -colorspace bt2020nc -color_range tv -i ./1/after_nvhsp_proc_output.265 -vcodec copy  ./1/result.mp4 -hide_banner
  
  
  
  Truncating packet of size 49766400 to 3260044
  
  [rawvideo @ 0x40a6400] Estimating duration from bitrate, this may be inaccurate
  
  Input #0, rawvideo, from './1/nvhsp_after_output.265':
  
    Duration: N/A, start: 0.000000, bitrate: 9953280 kb/s
  
      Stream #0:0: Video: rawvideo (Y3[0][16] / 0x10003359), yuv444p16le(tv, bt2020nc/bt2020/smpte2084), 3840x2160, 9953280 kb/s, 25 tbr, 25 tbn, 25 tbc
  
  [mp4 @ 0x40b0440] Could not find tag for codec rawvideo in stream #0, codec not currently supported in container
  
  Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (copy)
  
      Last message repeated 1 times

  Goal

  • I want to generate matadata normally when encoding a video through hevc_nvenc.

  • I want to create a video through hevc_nvenc and play HDR Video on smart tv with 10bit color depth support.

  ---

  Additional

  • Is it normal for ffmpeg hevc_nvenc not to generate metadata in the resulting video file ? or is it a bug ?

  • Please refer to the image below. (*’알 수 없음’ meaning ’unknown’)

    • if you need more detail file info, check this Gist Link (by ffprobe)
      

  • However, if you encode a file in libx265, the attribute information is entered correctly as shown below.

    • if you need more detail file info, check this Gist Link
      

  However, when using hevc_nvenc, all information is missing.

  • i used option -show_streams -show_programs -show_format -show_data -of json -show_frames -show_log 56 at ffprobe

• What are supported ffmpeg rtp_mpegts Muxer options ? (mpegts Muxer options are ignored)

  7 mars 2020, par drake7

  I created a UDP stream with -f mpegts and some options like -mpegts_transport_stream_id.

  I received the stream with "StreamXpert - Real-time stream analyzer" that shows all options are in the output. See my ffmpeg parameters and the StreamXpert at the end.

  The same Muxer options seem to be ignored with -f rtp_mpegts.

  I have tried to use -f mpegts and pipe it to -f rtp_mpegts like so :

  ffmpeg -i ... -f mpegts pipe: | ffmpeg pipe: -c copy -f rtp_mpegts "rtp://239.1.1.9:1234?pkt_size=1316"

  The options are still ignored.

  This ticket "support options for MPEGTS muxer when using RTP_MPEGTS" also notices the ignored option. Furthermore in this comment, "thovo" gives an analysis and suggests a solution.

  Obviously the problem still exists. Anybody found a workaround for this ?

  My additional question : I have not questioned if my project really needs rtp in the first place. Maybe my coworker didn’t know better and requested rtp when udp would be sufficient as well.

  The aim was to receive the RTP stream with a TV using DVB via IP. This was successful an a Panasonic TV.

  The SAT>IP Specification on page 10 requires rtp for Media Transport :

  The SAT>IP protocol makes use of :

  • UPnP for Addressing, Discovery and Description,
  • RTSP or HTTP for Control,
  • RTP or HTTP for Media Transport.

  Is udp out of the equation ?

  ---

  ffmpeg : (all options are in the output with -f mpegts)

  (HEX to decimal : 0x005A = 90, 0x005B = 91 0x005C = 92, 0x005D = 93, 0x005E= 94)

  ffmpeg -f lavfi -i testsrc \
  
  -r 25 \
  
  -c:v libx264 \
  
  -pix_fmt yuv420p \
  
  -profile:v main -level 3.1 \
  
  -preset veryfast \
  
  -vf scale=1280:720,setdar=dar=16/9 \
  
  -an \
  
  -bsf:v h264_mp4toannexb \
  
  -flush_packets 0 \
  
  -b:v 4M \
  
  -muxrate 8M \
  
  -pcr_period 20 \
  
  -pat_period 0.10 \
  
  -sdt_period 0.25 \
  
  -metadata:s:a:0 language=nya \
  
  -mpegts_flags +pat_pmt_at_frames \
  
  -mpegts_transport_stream_id 0x005A \
  
  -mpegts_original_network_id 0x005B \
  
  -mpegts_service_id 0x005C \
  
  -mpegts_pmt_start_pid 0x005D \
  
  -mpegts_start_pid 0x005E \
  
  -mpegts_service_type advanced_codec_digital_hdtv \
  
  -metadata service_provider='WI' \ 
  
  -metadata service_name='W' \
  
  -mpegts_flags system_b -flush_packets 0 \
  
  -f mpegts "udp://239.1.1.10:1234?pkt_size=1316"

  StreamXpert Output :

  -mpegts_transport_stream_id = Transport Stream ID (yellow text highlight)

  -mpegts_original_network_id = Original Network ID, onw (green text highlight)

  -mpegts_service_id = Program, service (pink text highlight)

  -mpegts_pmt_start_pid = PMT PID, Table PID (turquoise text highlight)

  -mpegts_start_pid = PID, PCR PID (red text highlight)

  -mpegts_service_type = service type (blue text)

  service_name = Service name (orange text)

  service_provider = Service provider (pink text)