Recherche avancée

Sur d’autres sites (7833)

• Dreamcast Development Desktop

  28 mars 2011, par Multimedia Mike — Sega Dreamcast

  Some people are curious about what kind of equipment is required to program a Sega Dreamcast. This is my setup :

  
  
  

  It’s a bit overcomplicated. The only piece in that picture which doesn’t play a role in the Dreamcast development process is the scanner. The Eee PC does the heavy lifting of development (i.e., text editing and cross compilation) and uploads to the Dreamcast via a special serial cable. Those are the most essential parts and are really the only pieces necessary for a lot of algorithmic stuff (things that can be validated via a serial console). But then I have to go up a level where I output video. That’s where things get messy.

  
  
  

  The Mac Mini and giant monitor really just act as a glorified TV in this case. Ideally, it will be more than that. The DC outputs audio and video via composite cables to a Canopus DV capture bridge. That’s connected via FireWire to the external hard drive underneath the Mac Mini, which is connected to the Mac. Adobe Premiere Pro handles the DV capture / display.

  One day I hope to have something worthwhile to capture.

• Notes on Linux for Dreamcast

  23 février 2011, par Multimedia Mike — Sega Dreamcast, VP8

  I wanted to write down some notes about compiling Linux on Dreamcast (which I have yet to follow through to success). But before I do, allow me to follow up on my last post where I got Google’s libvpx library decoding VP8 video on the DC. Remember when I said the graphics hardware could only process variations of RGB color formats ? I was mistaken. Reading over some old documentation, I noticed that the DC’s PowerVR hardware can also handle packed YUV textures (UYVY, specifically) :

  
  
  

  The video looks pretty sharp in the small photo. Up close, less so, due to the low resolution and high quantization of the test vector combined with the naive chroma upscaling. For the curious, the grey box surrounding the image highlights the 256-square texture that the video frame gets plotted on. Texture dimensions have to be powers of 2.

  Notes on Linux for Dreamcast
  I’ve occasionally dabbled with Linux on my Dreamcast. There’s an ancient (circa 2001) distro based around a build of kernel 2.4.5 out there. But I wanted to try to get something more current compiled. Thus far, I have figured out how to cross compile kernels pretty handily but have been unsuccessful in making them run.

  Here are notes are the compilation portion :
  

  • kernel.org provides a very useful set of cross compiling toolchains
  • get the gcc 4.5.1 cross toolchain for SH-4 (the gcc 4.3.3 one won’t work because the binutils is too old ; it will fail to assemble certain instructions as described in this post)
  • working off of Linux kernel 2.6.37, edit the top-level Makefile ; find the ARCH and CROSS_COMPILE variables and set appropriately :

    ARCH ?= sh
    CROSS_COMPILE ?= /path/to/gcc-4.5.1-nolibc/sh4-linux/bin/sh4-linux-
    

  • $ make dreamcast_defconfig
  • $ make menuconfig ... if any changes to the default configuration are desired
  • manually edit arch/sh/Makefile, changing :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp,-m4-nofpu)
    

    to :

    cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \
            $(call cc-option,-mno-implicit-fp)
    

    I.e., remove the '-m4-nofpu' option. According to the gcc man page, this will "Generate code for the SH4 without a floating-point unit." Why this is a default is a mystery since the DC’s SH-4 has an FPU and compilation fails when enabling this option.

  • On that note, I was always under the impression that the DC sported an SH-4 CPU with the model number SH7750. According to this LinuxSH wiki page as well as the Linux kernel help, it actually has an SH7091 variant. This photo of the physical DC hardware corroborates the model number.
  • $ make ... to build a Linux kernel for the Sega Dreamcast

  Running
  So I can compile the kernel but running the kernel (the resulting vmlinux ELF file) gives me trouble. The default kernel ELF file reports an entry point of 0x8c002000. Attempting to upload this through the serial uploading facility I have available to me triggers a system reset almost immediately, probably because that’s the same place that the bootloader calls home. I have attempted to alter the starting address via ’make menuconfig’ -> System type -> Memory management options -> Physical memory start address. This allows the upload to complete but it still does not run. It’s worth noting that the 2.4.5 vmlinux file from the old distribution can be executed when uploaded through the serial loader, and it begins at 0x8c210000.

• How to use ffmepg create video from some bitmaps(the format is ARGB32) [closed]

  16 février 2013, par xiangyun

  I have some bitmaps(the format is ARGB32), I want use ffmepg to create video from this bitmaps, the video format is mp4, encoder video stream use H263.
  This is my frist time use ffmpeg ,I had read sample code in ffmpeg doc, but I still don't know how to create mp4 file from serial bitmaps. And I want use this native code in android app. Anybody who had experience on ffmepg can help or teach me ?