Recherche avancée

Sur d’autres sites (10086)

• "Error opening input" error when running ffmpeg via shell script

  15 octobre 2024, par Roni Yaniv

  I'm on a macbook running sonoma 14.7.

  


  I have the following ffmpeg command which runs just fine by itself in the same folder of the files I need to modify :

  


  ffmpeg -i "water-stream-90fps.mp4" -vf "drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow" "water-stream-90fps-with-markers.mp4"

  


  However, when I try to use it in a shell script by running ./add_markers.sh in the same folder, I get an error.

  


  This is the add_markers.sh script :

  


  #!/bin/bash

# Replace '/path/to/your/folder' with the actual path to your folder
folder=$(pwd)

# Replace 'ffmpeg -i input.mp4 -vf scale=640:480 output.mp4' with your desired FFmpeg command
ffmpeg_command="ffmpeg -i input.mp4 -vf \"drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow\" output.mp4"

echo "$ffmpeg_command"

# Loop through all files in the folder and execute the FFmpeg command

for file in "$folder"/*; do
    filename=$(basename "${file%.*}") #get only the first part of the file name without path or extension

    # Replace 'input.mp4' with the current filename and 'output.mp4' with the new filename. 
    # Added double quotes to manage filenames with spaces.
    new_command="${ffmpeg_command//input.mp4/\"$filename.mp4\"}"
    new_command="${new_command//output.mp4/\"$filename-with-markers.mp4\"}"

    echo "Running $new_command"

    $new_command

done


  


  This is the error I get (for one of the files, same error for all of them) :

  


  Running ffmpeg -i "water-stream-90fps.mp4" -vf "drawtext=text='Frame\: %{frame_num}': start_number=1: x=(w-text_w): y=(h-text_h):fontsize=(h*10/100):fontcolor=yellow,drawtext=text='%{pts\:hms}':x=0:y=0:fontsize=(h*10/100):fontcolor=yellow" "water-stream-90fps-with-markers.mp4"
ffmpeg version 7.0 Copyright (c) 2000-2024 the FFmpeg developers
  built with Apple clang version 15.0.0 (clang-1500.3.9.4)
  configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.0 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopenvino --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
  libavutil      59.  8.100 / 59.  8.100
  libavcodec     61.  3.100 / 61.  3.100
  libavformat    61.  1.100 / 61.  1.100
  libavdevice    61.  1.100 / 61.  1.100
  libavfilter    10.  1.100 / 10.  1.100
  libswscale      8.  1.100 /  8.  1.100
  libswresample   5.  1.100 /  5.  1.100
  libpostproc    58.  1.100 / 58.  1.100
[in#0 @ 0x6000015bc300] Error opening input: No such file or directory
Error opening input file "water-stream-90fps.mp4".
Error opening input files: No such file or directory


  


  I tried all kinds of things but my brain is starting to swell. Any guidance/help would be appreciated.

  


• Moviepy not updating FFmpeg Version after FFmpeg Install ?

  31 mai 2024, par The_ Game12

  I've been toying around with MoviePy, and recently switched a project to a new computer at home to continue messing around with it. However, I tried running what I had previously written (which ran perfectly fine on the other computer) and I get this :

  


  OSError: MoviePy error: failed to read the first frame of video file ./Gameplay/minecraft-
gameplay2.mp4. That might mean that the file is corrupted. That may also mean that you are using 
a deprecated version of FFMPEG. On Ubuntu/Debian for instance the version in the repos is 
deprecated. Please update to a recent version from the website.



  


  After reading the error, I did as it instructed, and updated my FFmpeg :

  


  $ ffmpeg
ffmpeg version N-115387-g8e27bd025f-20240525 Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 13.2.0 (crosstool-NG 1.26.0.65_ecc5e41)
  configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-ffbuild-linux-gnu- --arch=x86_64 --target-os=linux --enable-gpl --enable-version3 --disable-debug --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-openssl --enable-fontconfig --enable-libharfbuzz --enable-libvorbis --enable-opencl --enable-libpulse --enable-libvmaf --enable-libxcb --enable-xlib --enable-amf --enable-libaom --enable-libaribb24 --enable-avisynth --enable-chromaprint --enable-libdav1d --enable-libdavs2 --enable-libdvdread --enable-libdvdnav --disable-libfdk-aac --enable-ffnvcodec --enable-cuda-llvm --enable-frei0r --enable-libgme --enable-libkvazaar --enable-libaribcaption --enable-libass --enable-libbluray --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librist --enable-libssh --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libvpl --enable-openal --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopenmpt --enable-librav1e --enable-librubberband --disable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --enable-libdrm --enable-vaapi --enable-libvidstab --enable-vulkan --enable-libshaderc --enable-libplacebo --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --enable-libzvbi --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-libs='-ldl -lgomp' --extra-ldflags=-pthread --extra-ldexeflags=-pie --cc=x86_64-ffbuild-linux-gnu-gcc --cxx=x86_64-ffbuild-linux-gnu-g++ --ar=x86_64-ffbuild-linux-gnu-gcc-ar --ranlib=x86_64-ffbuild-linux-gnu-gcc-ranlib --nm=x86_64-ffbuild-linux-gnu-gcc-nm --extra-version=20240525
  libavutil      59. 20.100 / 59. 20.100
  libavcodec     61.  5.104 / 61.  5.104
  libavformat    61.  3.104 / 61.  3.104
  libavdevice    61.  2.100 / 61.  2.100
  libavfilter    10.  2.102 / 10.  2.102
  libswscale      8.  2.100 /  8.  2.100
  libswresample   5.  2.100 /  5.  2.100
  libpostproc    58.  2.100 / 58.  2.100
Universal media converter
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...


  


  And I continued getting the same error. So I looked at what version my moviepy was using, and it was still 4.X. I read somewhere that your FFmpeg version is determined on the first use, which made sense, so I uninstalled and reinstalled, to get the same error.

  


  I am honestly lost at this point, as I have the newest version of FFmpeg, but I still get this from moviepy :

  


  >>> import moviepy&#xA;>>> print(moviepy.config.FFPMEG_BINARY)&#xA;ffmpeg : /home/<username>/.local/lib/python3.9/site-packages/imageio_ffmpeg/binaries/ffmpeg-linux64-v4.2.2&#xA;</username>

  


  Any Ideas as to what I'm doing wrong ?

  


  (Note : I'm using Crostini which I believe is using an Ubuntu or Ubuntu-Like shell)

  


  Thanks :)

  


• How can use ffmpeg in AWS Lambda to clip hls trasnsimision to .mp4

  15 novembre 2024, par Bruno Munné

  The ffmpeg input is through the public url of the bucket, I want to save the output in a tmp.mp4 file and I want to upload this file to the bucket. Locally the ffmpeg command works perfectly, lasting no more than 3 seconds and the output file weighs less than 1MB

  


  export const handler = async (event) => {
    try {
        const { m3u8, offset, duration, signedURL } = event;

        const clipKey = `clip_output.mp4`;
        const clipFilePath = path.join('/tmp', clipKey);

        execSync(`/opt/ffmpeglib/ffmpeg -i ${process.env.URL_CLOUDFLARE}/${m3u8} -ss ${offset} -t ${duration} -c copy -f mp4 ${clipFilePath}`)

        const fileContent = fs.readFileSync(clipFilePath);
        const resSign = await fetch(signedURL, {
            method: "PUT",
            headers: {
                "Content-Type": "application/octet-stream",
            },
            body: fileContent,
        });

        if (!resSign.ok) throw new Error(`Failed to upload file to S3: ${resSign.statusText}`);

        fs.unlinkSync(clipFilePath);

        return {
            statusCode: 200,
            body: JSON.stringify({
                message: 'Clip procesado y subido correctamente',
                clipKey: path.basename(clipFilePath)
            }),
        };
    } catch (error) {
        console.error("Error al procesar el clip:", error);
        return {
            statusCode: 500,
            body: JSON.stringify({ error: error.message }),
        };
    }
};


  


  The error it shows me is the following

  


   at genericNodeError (node:internal/errors:984:15)&#xA;    at wrappedFn (node:internal/errors:538:14)&#xA;    at checkExecSyncError (node:child_process:891:11)&#xA;    at execSync (node:child_process:963:15)&#xA;    at Runtime.handler (file:///var/task/index.js:16:3)&#xA;    at Runtime.handleOnceNonStreaming (file:///var/runtime/index.mjs:1173:29) {&#xA;  status: null,&#xA;  signal: &#x27;SIGSEGV&#x27;,&#xA;  output: [&#xA;    null,&#xA;    <buffer>,&#xA;    <buffer 66="66" 6d="6d" 70="70" 65="65" 67="67" 20="20" 76="76" 72="72" 73="73" 69="69" 6f="6f" 6e="6e" 4e="4e" 2d="2d" 37="37" 31="31" 30="30" 36="36" 34="34" 64="64" 35="35" 33="33" 63="63" 74="74" 61="61" 68="68" 3a="3a" 2f="2f" 1194="1194" more="more" bytes="bytes">&#xA;  ],&#xA;  pid: 13,&#xA;  stdout: <buffer>,&#xA;  stderr: <buffer 66="66" 6d="6d" 70="70" 65="65" 67="67" 20="20" 76="76" 72="72" 73="73" 69="69" 6f="6f" 6e="6e" 4e="4e" 2d="2d" 37="37" 31="31" 30="30" 36="36" 34="34" 64="64" 35="35" 33="33" 63="63" 74="74" 61="61" 68="68" 3a="3a" 2f="2f" 1194="1194" more="more" bytes="bytes">&#xA;}&#xA;ffmpeg version N-71064-gd5e603ddc0-static https://johnvansickle.com/ffmpeg/  Copyright (c) 2000-2024 the FFmpeg developers&#xA;built with gcc 8 (Debian 8.3.0-6)&#xA;configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg&#xA;libavutil      59. 27.100 / 59. 27.100&#xA;libavcodec     61.  9.100 / 61.  9.100&#xA;libavformat    61.  4.100 / 61.  4.100&#xA;libavdevice    61.  2.100 / 61.  2.100&#xA;libavfilter    10.  2.102 / 10.  2.102&#xA;libswscale      8.  2.100 /  8.  2.100&#xA;libswresample   5.  2.100 /  5.  2.100&#xA;libpostproc    58.  2.100 / 58.  2.100&#xA;END RequestId: 2fc8c51e-66c6-4c74-aa9c-fa10c11207a0&#xA;REPORT RequestId: 2fc8c51e-66c6-4c74-aa9c-fa10c11207a0  Duration: 164.82 ms Billed Duration: 165 ms Memory Size: 2048 MB    Max Memory Used: 88 MB  Init Duration: 185.19 ms&#xA;</buffer></buffer></buffer></buffer>

  


  Help to resolve it please