Recherche avancée

Sur d’autres sites (8350)

• ffmpeg stops randomly with "No more output streams to write to, finishing" when reading rtsp stream [on hold]

  7 juin 2016, par ImagineDragon

  Basically I am running the following ffmpeg command to read an h264 rtsp stream using hls muxer, under Ubuntu 14.04 64bit with i7 CPU and 8GB memory :

  ffmpeg -v debug -i rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB -codec copy -flags -global_header -f hls -hls_time 5 -use_localtime 1 -hls_segment_filename '/home/eason/ffmpeg-test/%s.ts' '/home/eason/ffmpeg-test/live.m3u8'
  
  ffmpeg version N-79139-gde1a0d4 Copyright (c) 2000-2016 the FFmpeg developers
  
    built with gcc 4.8 (Ubuntu 4.8.4-2ubuntu1~14.04.1)
  
    configuration: --extra-libs=-ldl --prefix=/opt/ffmpeg --mandir=/usr/share/man --enable-avresample --disable-debug --enable-nonfree --enable-gpl --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --disable-decoder=amrnb --disable-decoder=amrwb --enable-libpulse --enable-libfreetype --enable-gnutls --enable-libx264 --enable-libx265 --enable-libfdk-aac --enable-libvorbis --enable-libmp3lame --enable-libopus --enable-libvpx --enable-libspeex --enable-libass --enable-avisynth --enable-libsoxr --enable-libxvid --enable-libvidstab
  
    libavutil      55. 19.100 / 55. 19.100
  
    libavcodec     57. 30.100 / 57. 30.100
  
    libavformat    57. 29.101 / 57. 29.101
  
    libavdevice    57.  0.101 / 57.  0.101
  
    libavfilter     6. 40.102 /  6. 40.102
  
    libavresample   3.  0.  0 /  3.  0.  0
  
    libswscale      4.  0.100 /  4.  0.100
  
    libswresample   2.  0.101 /  2.  0.101
  
    libpostproc    54.  0.100 / 54.  0.100
  
  Splitting the commandline.
  
  Reading option '-v' ... matched as option 'v' (set logging level) with argument 'debug'.
  
  Reading option '-re' ... matched as option 're' (read input at native frame rate) with argument '1'.
  
  Reading option '-i' ... matched as input file with argument 'rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB'.
  
  Reading option '-codec' ... matched as option 'codec' (codec name) with argument 'copy'.
  
  Reading option '-flags' ... matched as AVOption 'flags' with argument '-global_header'.
  
  Reading option '-f' ... matched as option 'f' (force format) with argument 'hls'.
  
  Reading option '-hls_time' ... matched as AVOption 'hls_time' with argument '5'.
  
  Reading option '-use_localtime' ... matched as AVOption 'use_localtime' with argument '1'.
  
  Reading option '-hls_segment_filename' ... matched as AVOption 'hls_segment_filename' with argument '/home/eason/ffmpeg-test/%s.ts'.
  
  Reading option '/home/eason/ffmpeg-test/live.m3u8' ... matched as output file.
  
  Finished splitting the commandline.
  
  Parsing a group of options: global .
  
  Applying option v (set logging level) with argument debug.
  
  Successfully parsed a group of options.
  
  Parsing a group of options: input file rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB.
  
  Applying option re (read input at native frame rate) with argument 1.
  
  Successfully parsed a group of options.
  
  Opening an input file: rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB.
  
  [tcp @ 0x29c4d60] No default whitelist set
  
  [rtsp @ 0x29c2e20] SDP:
  
  m=video 0 RTP/AVP 96
  
  a=rtpmap:96 H264/90000
  
  a=fmtp:96 packetization-mode=1;profile-level-id=640028;sprop-parameter-sets=Z2QAKKzoBQBbkA==,aO48sA==
  
  a=control:trackID=0
  
  m=audio 0 RTP/AVP 98
  
  a=rtpmap:98 MPEG4-GENERIC/16000/1
  
  a=fmtp:98 profile-level-id=1;mode=AAC-lbr;sizelength=13;indexlength=3;indexdeltalength=3;config=1408;cpresent=0;
  
  a=control:trackID=1
  
  
  
  
  
  [rtsp @ 0x29c2e20] video codec set to: h264
  
  [rtsp @ 0x29c2e20] RTP Packetization Mode: 1
  
  [rtsp @ 0x29c2e20] RTP Profile IDC: 64 Profile IOP: 0 Level: 28
  
  [rtsp @ 0x29c2e20] Extradata set to 0x29c4ff0 (size: 22)
  
  [rtsp @ 0x29c2e20] audio codec set to: aac
  
  [rtsp @ 0x29c2e20] audio samplerate set to: 16000
  
  [rtsp @ 0x29c2e20] audio channels set to: 1
  
  [rtp @ 0x29c50a0] No default whitelist set
  
  [udp @ 0x29c5200] No default whitelist set
  
  [udp @ 0x29c5200] end receive buffer size reported is 131072
  
  [udp @ 0x29d9480] No default whitelist set
  
  [udp @ 0x29d9480] end receive buffer size reported is 131072
  
  [rtsp @ 0x29c2e20] method SETUP failed: 461 Unsupported transport
  
  [rtsp @ 0x29c2e20] CSeq: 3
  
  
  
  [rtsp @ 0x29c2e20] setting jitter buffer size to 0
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] hello state=0
  
  [rtsp @ 0x29c2e20] All info found
  
  [rtsp @ 0x29c2e20] rfps: 24.250000 0.018062
  
  [rtsp @ 0x29c2e20] rfps: 24.333333 0.012911
  
  [rtsp @ 0x29c2e20] rfps: 24.416667 0.008627
  
  [rtsp @ 0x29c2e20] rfps: 24.500000 0.005207
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 24.583333 0.002653
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 24.666667 0.000965
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 24.750000 0.000142
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 24.833333 0.000185
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 24.916667 0.001093
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 25.000000 0.002867
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 25.083333 0.005507
  
      Last message repeated 1 times
  
  [rtsp @ 0x29c2e20] rfps: 25.166667 0.009011
  
  [rtsp @ 0x29c2e20] rfps: 25.250000 0.013382
  
  [rtsp @ 0x29c2e20] rfps: 25.333333 0.018618
  
  [rtsp @ 0x29c2e20] rfps: 50.000000 0.011469
  
  Input #0, rtsp, from 'rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB':
  
    Duration: N/A, start: 0.000000, bitrate: N/A
  
      Stream #0:0, 28, 1/90000: Video: h264 (High), 1 reference frame, yuv420p(left), 1280x720, 1/180000, 24.75 tbr, 90k tbn, 180k tbc
  
      Stream #0:1, 23, 1/16000: Audio: aac (LC), 16000 Hz, mono, fltp
  
  Successfully opened the file.
  
  Parsing a group of options: output file /home/eason/ffmpeg-test/live.m3u8.
  
  Applying option codec (codec name) with argument copy.
  
  Applying option f (force format) with argument hls.
  
  Successfully parsed a group of options.
  
  Opening an output file: /home/eason/ffmpeg-test/live.m3u8.
  
  Successfully opened the file.
  
  [file @ 0x2cae180] Setting default whitelist 'file,crypto'
  
  [mpegts @ 0x29f7ce0] muxrate VBR, pcr every 9000 pkts, sdt every 2147483647, pat/pmt every 2147483647 pkts
  
  Output #0, hls, to '/home/eason/ffmpeg-test/live.m3u8':
  
    Metadata:
  
      encoder         : Lavf57.29.101
  
      Stream #0:0, 0, 1/90000: Video: h264, 1 reference frame, yuv420p(left), 1280x720 (0x0), 1/90000, q=2-31, 24.75 tbr, 90k tbn, 90k tbc
  
      Stream #0:1, 0, 1/90000: Audio: aac (LC), 16000 Hz, mono
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (copy)
  
    Stream #0:1 -> #0:1 (copy)
  
  Press [q] to stop, [?] for help
  
  cur_dts is invalid (this is harmless if it occurs once at the start per stream)
  
      Last message repeated 103 times
  
  [hls @ 0x2a0fc00] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
  
  [AVIOContext @ 0x2c998c0] Statistics: 0 seeks, 155 writeouts=N/A speed=1.01x    
  
  [file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
  
  [file @ 0x2ca9fc0] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
  
  [AVIOContext @ 0x2caa080] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 103 writeouts=N/A speed=   1x    
  
  [file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
  
  [file @ 0x2c97c60] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
  
  [AVIOContext @ 0x2c97d20] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 104 writeouts=N/A speed=   1x    
  
  [file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
  
  [file @ 0x2c99680] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
  
  [AVIOContext @ 0x2c99820] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 28 writeoutse=N/A speed=   1x    
  
  [file @ 0x29c50c0] Setting default whitelist 'file,crypto'
  
  [file @ 0x2ba60e0] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
  
  [AVIOContext @ 0x29c2ce0] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 111 writeouts=N/A speed=   1x    
  
  [file @ 0x2c97d40] Setting default whitelist 'file,crypto'
  
  [file @ 0x2a134e0] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:0
  
  [AVIOContext @ 0x2a11000] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 105 writeouts=N/A speed=   1x    
  
  [file @ 0x29c50c0] Setting default whitelist 'file,crypto'
  
  [file @ 0x2a10c00] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:1
  
  [AVIOContext @ 0x2a10cc0] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 103 writeouts=N/A speed=   1x    
  
  [file @ 0x29c50c0] Setting default whitelist 'file,crypto'
  
  [file @ 0x2c99480] Setting default whitelist 'file,crypto'
  
  
  
  .......repeat........
  
  
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:71
  
  [AVIOContext @ 0x2c97fa0] Statistics: 0 seeks, 1 writeouts
  
  [rtsp @ 0x29c2e20] Too short data for FU-A H264 RTP packette=N/A speed=   1x    
  
  [AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 103 writeouts=N/A speed=   1x    
  
  [file @ 0x2c97b20] Setting default whitelist 'file,crypto'
  
  [file @ 0x2c97c60] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:72
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 156 writeouts=N/A speed=   1x    
  
  [file @ 0x2c99480] Setting default whitelist 'file,crypto'
  
  [file @ 0x2cab600] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:73
  
  [AVIOContext @ 0x2cab6c0] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 104 writeouts=N/A speed=   1x    
  
  [file @ 0x2cadc00] Setting default whitelist 'file,crypto'
  
  [file @ 0x2c99480] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:74
  
  [AVIOContext @ 0x29c2ce0] Statistics: 0 seeks, 1 writeouts
  
  [AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 103 writeouts=N/A speed=   1x    
  
  [file @ 0x2a13540] Setting default whitelist 'file,crypto'
  
  [file @ 0x2cab680] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:75
  
  [AVIOContext @ 0x2c99480] Statistics: 0 seeks, 1 writeouts
  
  No more output streams to write to, finishing.:46.09 bitrate=N/A speed=0.993x    
  
  [AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 138 writeouts
  
  [file @ 0x29c50c0] Setting default whitelist 'file,crypto'
  
  [hls @ 0x2a0fc00] EXT-X-MEDIA-SEQUENCE:76
  
  [AVIOContext @ 0x2ba60e0] Statistics: 0 seeks, 1 writeouts
  
  frame= 8423 fps= 21 q=-1.0 Lsize=N/A time=00:06:46.09 bitrate=N/A speed=0.993x    
  
  video:37031kB audio:1586kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
  
  Input file #0 (rtsp://172.16.11.247:554/live/ch00_0?token=hQttXvrjSPOcClQB):
  
    Input stream #0:0 (video): 8423 packets read (37919815 bytes); 
  
    Input stream #0:1 (audio): 6345 packets read (1624337 bytes); 
  
    Total: 14768 packets (39544152 bytes) demuxed
  
  Output file #0 (/home/eason/ffmpeg-test/live.m3u8):
  
    Output stream #0:0 (video): 8423 packets muxed (37919815 bytes); 
  
    Output stream #0:1 (audio): 6345 packets muxed (1624337 bytes); 
  
    Total: 14768 packets (39544152 bytes) muxed
  
  0 frames successfully decoded, 0 decoding errors

  The problem is that ffmpeg exits randomly after 5 to 20 minutes. The RTSP is a live stream so stopping every 5 minute is really not acceptable. In the ffmpeg log I can’t see any noticeable error except "No more output streams to write to, finishing." near the end. Can someone shed some light upon this ? How can I make ffmpeg run without stopping ? Thanks

• Subtitling Sierra VMD Files

  1er juin 2016, par Multimedia Mike — Game Hacking

  I was contacted by a game translation hobbyist from Spain (henceforth known as The Translator). He had set his sights on Sierra’s 7-CD Phantasmagoria. This mammoth game was driven by a lot of FMV files and animations that have speech. These require language translation in the form of video subtitling. He’s lucky that he found possibly the one person on the whole internet who has just the right combination of skill, time, and interest to pull this off. And why would I care about helping ? I guess I share a certain camaraderie with game hackers. Don’t act so surprised. You know what kind of stuff I like to work on.

  The FMV format used in this game is VMD, which makes an appearance in numerous Sierra titles. FFmpeg already supports decoding this format. FFmpeg also supports subtitling video. So, ideally, all that’s necessary to support this goal is to add a muxer for the VMD format which can encode raw video and audio, which the format supports. Implement video compression as extra credit.

  The pipeline that I envisioned looks like this :

  
  

  

  VMD Subtitling Process

  
  

  “Trivial !” I surmised. I just never learn, do I ?

  The Plan
  So here’s my initial pitch, outlining the work I estimated that I would need to do towards the stated goal :

  1. Create a new file muxer that produces a syntactically valid VMD file with bogus video and audio data. Make sure it works with both FFmpeg’s playback system as well as the proper Phantasmagoria engine.
  2. Create a new video encoder that essentially operates in pass-through mode while correctly building a palette.
  3. Create a new basic encoder for the video frames.

  A big unknown for me was exactly how subtitle handling operates in FFmpeg. Thanks to this project, I now know. I was concerned because I was pretty sure that font rendering entails anti-aliasing which bodes poorly for keeping the palette count under 256 unique colors.

  Computer Science Puzzle
  When pondering how to process the palette, I was excited for the opportunity to exercise actual computer science. FFmpeg converts frames from paletted frames to full RGB frames. Then it needs to convert them back to paletted frames. I had a vague recollection of solving this problem once before when I was experimenting with a new paletted video codec. I seem to recall that I did the palette conversion in a very naive manner. I just used a static 256-element array and processed each RGB pixel of the frame, seeing if the value already occurred in the table (O(n) lookup) and adding it otherwise.
  

  There are more efficient algorithms, however, such as hash tables and trees. Somewhere along the line, FFmpeg helpfully acquired a rarely-used tree data structure, which was perfect for this project.

  So I was pretty pleased with this optimization. Too bad this wouldn’t survive to the end of the effort.

  Another palette-related challenge was the fact that a group of pictures would be accumulating a new palette but that palette needed to be recorded before the group. Thus, the muxer needed to have extra logic to rewind the file when the video encoder transmitted a palette change.

  Video Compression
  VMD has a few methods in its compression toolbox. It can use interframe differencing, it has some RLE, or it can code a frame raw. It can also use a custom LZ-like format on top of these. For early prototypes, I elected to leave each frame coded raw. After the concept was proved, I implemented the frame differencing.

  
  

  

  
  Top frame compared with the middle frame yields the bottom frame : red pixels indicate changes
  

  Encoding only those red dots in between vast runs of unchanged pixels yielded a vast measurable improvement. The next step was to try wiring up FFmpeg’s existing LZ compression facilities to the encoder. This turned out to be implausible since VMD’s LZ variant has nothing to do with anything FFmpeg already provides. Fortunately, the LZ piece is not absolutely required and the frame differencing + RLE provides plenty of compression.

  Subtitling
  I’ve never done anything, multimedia programming-wise, concerning subtitles. I guess all the entertainment I care about has always been in my native tongue. What a good excuse to program outside of my comfort zone !

  First, I needed to know how to access FFmpeg’s subtitling facilities. Fortunately, The Translator did the legwork on this matter so I didn’t have to figure it out.

  However, I intuitively had misgivings about this phase. I had heard that the subtitling process performs anti-aliasing. That means that the image would need to be promoted to a higher colorspace for this phase and that the anti-aliasing process would likely push the color count way past 256. Some quick tests revealed this to be the case, as the running color count would leap by several hundred colors as soon as the palette accounting algorithm encountered a subtitle.

  So I dug into the subtitle subsystem. I discovered that the subtitle library operates by creating a linked list of subtitle bitmaps that the client app must render. The bitmaps are comprised of 8-bit alpha transparency values that must be composited onto the target frame (i.e., 0 = transparent, 255 = 100% opaque). For example, the letter ‘H’ :

                                    (with 00s removed)
  13 F8 41 00 00 00 00 68 E4  |  13 F8 41             68 E4    
  14 FF 44 00 00 00 00 6C EC  |  14 FF 44             6C EC
  14 FF 44 00 00 00 00 6C EC  |  14 FF 44             6C EC
  14 FF 44 00 00 00 00 6C EC  |  14 FF 44             6C EC
  14 FF DC D0 D0 D0 D0 E4 EC  |  14 FF DC D0 D0 D0 D0 E4 EC
  14 FF 7E 50 50 50 50 9A EC  |  14 FF 7E 50 50 50 50 9A EC
  14 FF 44 00 00 00 00 6C EC  |  14 FF 44             6C EC
  14 FF 44 00 00 00 00 6C EC  |  14 FF 44             6C EC
  14 FF 44 00 00 00 00 6C EC  |  14 FF 44             6C EC
  11 E0 3B 00 00 00 00 5E CE  |  11 E0 3B             5E CE
  

  To get around the color explosion problem, I chose a threshold value and quantized values above and below to 255 and 0, respectively. Further, the process chooses an appropriate color from the existing palette rather than introducing any new colors.

  Muxing Matters
  In order to force VMD into a general purpose media framework, a lot of special information needs to be passed around. Like many paletted codecs, the palette needs to be transmitted from the file demuxer to the video decoder via some side channel. For re-encoding, this also implies that the palette needs to make the trip from the video encoder to the file muxer. As if this wasn’t enough, individual VMD frames have even more data that needs to be ferried between the muxer and codec levels, including frame change boundaries. FFmpeg provides methods to do these things, but I could not always rely on the systems to relay the data in all cases. I was probably doing something wrong ; I accept that. Instead, I just packed all the information at the front of an encoded frame and split it apart in the muxer.

  I could not quite figure out how to get the audio and video muxed correctly. As a result, neither FFmpeg nor the Phantasmagoria engine could replay the files correctly.

  Plan B
  Since I was having so much trouble creating an entirely new VMD file, likely due to numerous unknown bits of the file format, I thought of another angle : re-use the existing VMD file. For this approach, I kept the video encoder and file muxer that I created in the initial phase, but modified the file muxer to emit a special intermediate file. Then, I created a Python tool to repackage the original VMD file using compressed video data in the intermediate file.

  For this phase, I also implemented a command line switch for FFmpeg to disable subtitle blending, to make the feature feel like less of an unofficial hack, as though this nonsense would ever have a chance of being incorporated upstream.

  At this point, I was seeing some success with the complete, albeit roundabout, subtitling process. I constructed a subtitle file using “Spanish I Learned From Mexican Telenovelas” and the frames turned out fairly readable :

  
  

  

  “she cheated on him”

  
  

  

  “he’s a scumbag” … these random subtitles could fit surprisingly well !

  
  

  The few files that I tested appeared to work fine. But then I handed off my work to The Translator and he immediately found a bunch of problems. According to my notes, the problems mostly took the form of flashing, solid color frames. Further, I found tiny, mostly imperceptible flaws in my RLE compressor, usually only detectable by running strict comparison tools ; but I wasn’t satisfied.

  At this point, I think I attempted to just encode the entire palette at the front of each frame, as allowed by the format, but that did not seem to fix any problems. My notes are not completely clear on this matter (likely because I was still trying to figure out the exact problem), but I think it had to do with FFmpeg inserting extra video frames in order to even out gaps in the video framerate.

  Sigh, Plan C
  At this point, I was getting tired of trying to force FFmpeg to do this. So I decided to minimize its involvement using lessons learned up to this point.

  The next pitch :

  1. Create a new C program that can open an existing VMD file and output an identical VMD file. I know this sounds easy, but the specific method of copying entails interpreting individual parts of the file and writing those individual parts to the new file. This is in preparation for…
  2. Import the VMD video decoder functions directly into the program to decode the individual video frames and re-encode them, replacing the video frames as the file is rewritten.
  3. Wire up the subtitle system. During the adventure to disable subtitle blending, I accidentally learned enough about interfacing to the subtitle library to just invoke it directly.
  4. Rewrite the RLE method so that it is 100% correct.

  Off to work I went. That part about lifting the existing VMD decoder functions out of their libavcodec nest turned out to not be that straightforward. As an alternative, I modified the decoder to dump the raw frames to an intermediate file. In doing so, I think I was able to avoid the issue of the duplicated frames that plagued the previous efforts.

  Also, remember how I was really pleased with the palette conversion technique in which I was able to leverage computer science big-O theory ? By this stage, I had no reason to convert the paletted video to RGB in the first place ; all of the decoding, subtitling and re-encoding operates in the paletted colorspace.

  This approach seemed to work pretty well. The final program is subtitle-vmd.c. The process is still a little weird. The modifications in my own FFmpeg fork are necessary to create an intermediate file that the new C tool can operate with.

  Next Steps
  The Translator has found some assorted bugs and corner cases that still need to be ironed out. Further, for extra credit, I need find the change windows for each frame to improve compression just a little more. I don’t think I will be trying for LZ compression, though.

  However, almost as soon as I had this whole system working, The Translator informed me that there is another, different movie format in play in the Phantasmagoria engine called ROBOT, with an extension of RBT. Fortunately, enough of the algorithms have been reverse engineered and re-implemented in ScummVM that I was able to sort out enough details for another subtitling project. That will be the subject of a future post.

  See Also :

  • Subtitling Sierra RBT Files : The followup in which I discuss how to scribble text on the other animation format

• FFMPEG with Ubuntu and Multicast UDP Help me

  20 juin 2016, par michell

  good morning !
  My name is Michael, i’m Brazilian (sorry, my english is very bad :D)

  I’m transmiting by a computer use VLC transport stream about group multicast 239.0.0.1:5001 and receiving by another computer Ubuntu OS using ffmpeg.
  How i record this transport stream to .ts file with ffmpeg ?
  how i check bitrate of transport stream, null packets and vídeo with ffmpeg ?

  Help me, i will buy a chocolate for you haha :D

  Thanks for your support.

  Michaell