Recherche avancée

Sur d’autres sites (8244)

• Can't open ffmpeg output with quicktime, pix_fmt flag doesn't fix it

  13 novembre 2019, par kilojoules

  Quicktime can’t read the output of ffmpeg when I try making an animation. It uploads to imgur and plays no problem. A previous thread recommended that I add the -pix_fmt yuv420p flag. But, on my system, that does not work. ffmpeg runs without error when I exclude the pix_fmt flag, but I cannot open the output animation in quicktime.

  Why won’t quicktime open the animation ? How can I make the animation open with quicktime ?

  $ ffmpeg -y -i animation/tigers_${ii}_%05d.png  -pix_fmt yuv420p tiger${ii}.mp4
  
  ffmpeg version 4.0.2 Copyright (c) 2000-2018 the FFmpeg developers
  
    built with Apple LLVM version 8.0.0 (clang-800.0.42.1)
  
    configuration: --prefix=/usr/local/Cellar/ffmpeg/4.0.2 --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-gpl --enable-libmp3lame --enable-libx264 --enable-libxvid --enable-opencl --enable-videotoolbox --disable-lzma
  
    libavutil      56. 14.100 / 56. 14.100
  
    libavcodec     58. 18.100 / 58. 18.100
  
    libavformat    58. 12.100 / 58. 12.100
  
    libavdevice    58.  3.100 / 58.  3.100
  
    libavfilter     7. 16.100 /  7. 16.100
  
    libavresample   4.  0.  0 /  4.  0.  0
  
    libswscale      5.  1.100 /  5.  1.100
  
    libswresample   3.  1.100 /  3.  1.100
  
    libpostproc    55.  1.100 / 55.  1.100
  
  Input #0, image2, from 'animation/tigers_1.10_%05d.png':
  
    Duration: 00:00:08.32, start: 0.000000, bitrate: N/A
  
      Stream #0:0: Video: png, rgba(pc), 2023x3036 [SAR 17716:17716 DAR 2023:3036], 25 fps, 25 tbr, 25 tbn, 25 tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (png (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  [libx264 @ 0x7fdd7b800c00] width not divisible by 2 (2023x3036)
  
  Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
  
  Conversion failed!

• Decode a proprietary H264 network video stream

  10 mars 2023, par al_mukthar

  I have incoming byte streams probably encoded in H264 from a RTSP camera through a websocket in my spring boot application,

  


  I need to decode the incoming H264 streams to transmit the video to my frontend clients.
I have tried using javaCV/FFMpeg but nothing works.

  


  Any help would be appreciated

  


  this is the part of hex dump received through socket

  


  00000000: 01 00 00 00 04 48 32 36 34 00 00 00 24 38 65 34    .....H264...$8e4
00000010: 32 39 65 37 61 2D 32 66 34 66 2D 34 37 31 61 2D    29e7a-2f4f-471a-
00000020: 39 61 63 30 2D 66 66 62 38 64 64 37 63 37 64 37    9ac0-ffb8dd7c7d7
00000030: 32 00 00 00 D4 7B 22 49 73 49 6E 69 74 22 3A 66    2...T{"IsInit":f
00000040: 61 6C 73 65 2C 22 49 73 41 75 64 69 6F 22 3A 66    alse,"IsAudio":f
00000050: 61 6C 73 65 2C 22 54 6F 74 61 6C 53 65 63 6F 6E    alse,"TotalSecon
00000060: 64 73 22 3A 30 2E 30 36 2C 22 46 72 61 6D 65 54    ds":0.06,"FrameT
00000070: 69 6D 65 22 3A 22 32 30 32 33 2D 30 32 2D 32 33    ime":"2023-02-23
00000080: 54 30 34 3A 32 31 3A 35 33 2E 35 33 31 5A 22 2C    T04:21:53.531Z",
00000090: 22 53 65 71 75 65 6E 63 65 49 64 22 3A 31 2C 22    "SequenceId":1,"
000000a0: 42 61 73 65 44 65 63 6F 64 65 54 69 6D 65 22 3A    BaseDecodeTime":
000000b0: 32 36 35 38 37 2C 22 4D 65 64 69 61 54 69 6D 65    26587,"MediaTime
000000c0: 22 3A 32 36 35 38 37 2C 22 49 73 46 72 61 6D 65    ":26587,"IsFrame
000000d0: 48 69 64 64 65 6E 22 3A 66 61 6C 73 65 2C 22 49    Hidden":false,"I
000000e0: 73 4B 65 79 46 72 61 6D 65 22 3A 66 61 6C 73 65    sKeyFrame":false
000000f0: 2C 22 49 64 22 3A 34 34 35 2C 22 47 65 6E 65 72    ,"Id":445,"Gener
00000100: 61 74 69 6F 6E 22 3A 31 7D 00 00 3F 50 00 00 00    ation":1}..?P...
00000110: 68 6D 6F 6F 66 00 00 00 10 6D 66 68 64 00 00 00    hmoof....mfhd...
00000120: 00 00 00 01 BD 00 00 00 50 74 72 61 66 00 00 00    ....=...Ptraf...
00000130: 10 74 66 68 64 00 02 00 00 00 00 00 01 00 00 00    .tfhd...........
00000140: 14 74 66 64 74 01 00 00 00 00 00 00 00 00 00 67    .tfdt..........g
00000150: DB 00 00 00 24 74 72 75 6E 01 00 0F 01 00 00 00    [...$trun.......
00000160: 01 00 00 00 70 00 00 00 3C 00 00 3E E0 00 01 00    ....p...<..>`...
00000170: 00 00 00 00 00 00 00 3E E8 6D 64 61 74 00 00 3E    .......>hmdat..>
00000180: DC 41 E1 81 80 93 BE 16 2B 33 77 3D 4C B6 55 8B    \Aa...>.+3w=L6U.
00000190: D2 55 60 92 05 F7 F7 A4 97 54 4B 6C A6 68 48 84    RU`..ww$.TKl&hH.
000001a0: 68 FF D2 B6 6C 02 31 FC 24 01 78 EA BD 20 AD 15    h.R6l.1|$.xj=.-.
000001b0: F1 73 31 4B EB EF 18 1B 50 B3 13 F2 DC C6 4C E1    qs1Kko..P3.r\FLa
000001c0: 75 8B 94 52 6B C5 09 37 55 1E 45 66 6A 92 39 23    u..RkE.7U.Efj.9#
000001d0: C9 2D FD BB EC AD FD CF C4 30 75 FF 44 66 FA 85    I-};l-}OD0u.Dfz.
000001e0: D9 7C 18 72 AE 63 45 60 DD D7 65 44 84 49 95 8D    Y|.r.cE`]WeD.I..
000001f0: 2C 70 6C 57 8E E9 A9 EB B6 F6 78 BD D6 88 99 F6    ,plW.i)k6vx=V..v
00000200: FC 25 B1 0A FF DF CB 77 6A 67 37 24 A5 3D 8F A1    |%1.._Kwjg7$%=.!
00000210: 27 9B 4F 42 0E CD B8 87 6E C9 99 FC 6F 4C 53 4B    '.OB.M8.nI.|oLSK
00000220: 01 EA B6 AF 99 F8 22 C1 8F 1E C1 66 D6 8A 09 D6    .j6/.x"A..AfV..V
00000230: 99 79 91 F7 C1 2A 08 1F 81 CB 5E DD C3 CA 86 8F    .y.wA*...K^]CJ..
00000240: 57 BF 17 A2 64 6B 69 56 AE 19 1F 57 AD A6 D8 C2    W?."dkiV...W-&XB
00000250: 06 28 EB 46 D3 E4 85 51 3E E2 A5 40 50 50 85 7D    .(kFSd.Q>b%@PP.}
00000260: 72 6B 20 87 1A 6E 73 E1 B8 88 9E 20 23 48 6D FE    rk...nsa8...#Hm~
00000270: C2 0D 39 ED 24 B2 6D B5 9B 81 B6 BC F4 EE DE A2    B.9m$2m5..6..bB.{"&.!4.R^5
000002b0: 2A A6 E2 71 D7 4F 96 0A EC AE 8D 39 27 B8 CF 61    *&bqWO..l..9'8Oa
000002c0: CC ED E9 AF 74 C3 95 D3 E3 96 32 20 E6 31 0B E4    Lmi/tC.Sc.2.f1.d
000002d0: DC F4 FF 41 37 36 E7 DB 87 AE B3 7D BF CA F8 05    \t.A76g[..3}?Jx.
000002e0: 72 2A 38 AB B8 8E 98 43 97 C8 5E 80 57 C6 E7 1E    r*8+8..C.H^.WFg.
000002f0: 86 75 CE CD CE BF CF 10 C9 8A C2 C9 6E 33 41 AC    .uNMN?O.I.BIn3A,
00000300: 91 AC A8 F3 1B E6 D5 0A 22 A1 2C 4C 68 19 51 4D    .,(s.fU."!,Lh.QM
00000310: 17 DA AE E1 D7 BC 0E 2D F8 14 61 E2 4F BA 26 A3    .Z.aW<.-x.abO:&#
00000320: 0A E4 A6 BE 08 EA 3C 28 E6 C5 6B CA 3A 86 D2 59    .d&>.j<(fEkJ:.RY
00000330: 34 C2 ED 91 72 5A EF 2C BE D7 38 A4 60 D7 F3 97    4Bm.rZo,>W8$`Ws.
00000340: BB E6 FD C2 D0 29 10 B5 A4 79 D8 3E 61 48 8A F9    ;f}BP).5$yX>aH.y
00000350: C6 D8 13 D0 FD DB D6 FA 24 7F CD 5A BF 06 57 49    FX.P}[Vz$.MZ?.WI
00000360: 51 EC ED B2 74 AB 92 1D 37 68 70 A2 A5 31 B5 5F    Qlm2t+..7hp"%15_
00000370: EA CF 9E 3E 6A B1 78 16 B7 94 D1 46 7B 63 C1 67    jO.>j1x.7.QF{cAg
00000380: D2 B0 08 44 64 1E 68 15 39 80 E3 DD EB C0 E1 71    R0.Dd.h.9.c]k@aq
00000390: E8 EE D0 4D DF 4F 41 E0 96 C5 34 AD BC D3 9E 88    hnPM_OA`.E4-'.7pV%_>.T..
00000430: 7F FC AD 71 CE AF 54 8B 5D DC 27 34 20 A3 0A 73    .|-qN/T.]\'4.#.s
00000440: 76 A5 81 33 22 31 56 6B 1D 82 C4 32 FB 82 15 F6    v%.3"1Vk..D2{..v
00000450: 97 C8 47 29 3C 9E 59 9A C0 83 48 A0 55 CB C8 D6    .HG)<.Y.@.H.UKHV
00000460: 36 92 CC 54 A7 00 E3 28 9E 99 45 B2 E5 7E 88 A7    6.LT'.c(..E2e~.'
00000470: 28 4E CA 75 17 3C D3 B5 6C F5 FD AC 05 55 BF F7    (NJu.?{.T2Yr.h.wYGw
000004d0: 3C 19 C8 7B 81 9B 17 19 E9 81 A0 36 AD C6 62 71    <.H{....i..6-Fbq
000004e0: DB 68 72 8F 6A 37 45 D9 0E 6E DC 2C 5E 52 C2 75    [hr.j7EY.n\,^RBu
000004f0: 51 2F F9 CE 8A 10 12 E9 C8 68 A9 D6 A6 D7 5B 14    Q/yN...iHh)V&W[.
00000500: 11 51 42 FD BE B5 09 56 7F 19 C3 EB A7 A6 DF 6C    .QB}>5.V..Ck'&_l
00000510: 55 A3 11 DC EF 81 C3 CD DD 63 BF 38 F8 5A 4A 45    U#.\o.CM]c?8xZJE
00000520: 33 24 7B A4 55 B3 85 A6 87 75 3B 85 51 5C 03 B7    3${$U3.&.u;.Q\.7


  


  UPDATE TO THE CODE

  


  1st Packet find here
2nd Packet find here

  


  I have updated the code as per one of the comment to read only MDAT box to retrieve H264 stream from the incoming bytes[] through the socket, now I send only MDAT box contents (next byte after MDAT box)

  


  public Map.Entry> hasMdat(byte[] byteArray) {
    for (int i = 0; i < byteArray.length - 3; i++) {
        if (byteArray[i] == (byte) 109 &&
                byteArray[i + 1] == (byte) 100 &&
                byteArray[i + 2] == (byte) 97 &&
                byteArray[i + 3] == (byte) 116) {

            return Map.entry(true, Arrays.asList(i, i + 1, i + 2, i + 3));
        }
    }
    return Map.entry(false, List.of(0));
}


  


  This is my code which handles the byte stream

  


  initSocketConnection(new VideoStreamCallback() {
        @Override
        public void onVideoStreamReceived(byte[] bytes) {
           
Map.Entry> b = hasMdat(bytes);
        if (b.getKey()) {
            byte[] b1 = Arrays.copyOfRange(bytes, b.getValue().get(3) + 1, bytes.length);
  //write b1 back to client using spring SSE
            
        }

        }
    });


  


• How to Choose the Optimal Multi-Touch Attribution Model for Your Organisation

  13 mars 2023, par Erin — Analytics Tips

  If you struggle to connect the dots on your customer journeys, you are researching the correct solution. 

  Multi-channel attribution models allow you to better understand the users’ paths to conversion and identify key channels and marketing assets that assist them.

  That said, each attribution model has inherent limitations, which make the selection process even harder.

  This guide explains how to choose the optimal multi-touch attribution model. We cover the pros and cons of popular attribution models, main evaluation criteria and how-to instructions for model implementation. 

  Pros and Cons of Different Attribution Models 

  

  First Interaction 

  First Interaction attribution model (also known as first touch) assigns full credit to the conversion to the first channel, which brought in a lead. However, it doesn’t report other interactions the visitor had before converting.

  Marketers, who are primarily focused on demand generation and user acquisition, find the first touch attribution model useful to evaluate and optimise top-of-the-funnel (ToFU). 

  Pros 

  • Reflects the start of the customer journey
  • Shows channels that bring in the best-qualified leads 
  • Helps track brand awareness campaigns

  Cons 

  • Ignores the impact of later interactions at the middle and bottom of the funnel 
  • Doesn’t provide a full picture of users’ decision-making process 

  Last Interaction 

  Last Interaction attribution model (also known as last touch) shifts the entire credit allocation to the last channel before conversion. But it doesn’t account for the contribution of all other channels. 

  If your focus is conversion optimization, the last-touch model helps you determine which channels, assets or campaigns seal the deal for the prospect. 

  Pros 

  • Reports bottom-of-the-funnel events
  • Requires minimal data and configurations 
  • Helps estimate cost-per-lead or cost-per-acquisition

  Cons 

  • No visibility into assisted conversions and prior visitor interactions 
  • Overemphasise the importance of the last channel (which can often be direct traffic) 

  Last Non-Direct Interaction 

  Last Non-Direct attribution excludes direct traffic from the calculation and assigns the full conversion credit to the preceding channel. For example, a paid ad will receive 100% of credit for conversion if a visitor goes directly to your website to buy a product. 

  Last Non-Direct attribution provides greater clarity into the bottom-of-the-funnel (BoFU). events. Yet, it still under-reports the role other channels played in conversion. 

  Pros 

  • Improved channel visibility, compared to Last-Touch 
  • Avoids over-valuing direct visits
  • Reports on lead-generation efforts

  Cons 

  • Doesn’t work for account-based marketing (ABM) 
  • Devalues the quality over quantity of leads 

  Linear Model

  Linear attribution model assigns equal credit for a conversion to all tracked touchpoints, regardless of their impact on the visitor’s decision to convert.

  It helps you understand the full conversion path. But this model doesn’t distinguish between the importance of lead generation activities versus nurturing touches.

  Pros 

  • Focuses on all touch points associated with a conversion 
  • Reflects more steps in the customer journey 
  • Helps analyse longer sales cycles

  Cons 

  • Doesn’t accurately reflect the varying roles of each touchpoint 
  • Can dilute the credit if too many touchpoints are involved 

  Time Decay Model 

  Time decay models assumes that the closer a touchpoint is to the conversion, the greater its influence. Pre-conversion touchpoints get the highest credit, while the first ones are ranked lower (5%-5%-10%-15%-25%-30%).

  This model better reflects real-life customer journeys. However, it devalues the impact of brand awareness and demand-generation campaigns. 

  Pros 

  • Helps track longer sales cycles and reports on each touchpoint involved 
  • Allows customising the half-life of decay to improve reporting 
  • Promotes conversion optimization at BoFu stages

  Cons 

  • Can prompt marketers to curtail ToFU spending, which would translate to fewer qualified leads at lower stages
  • Doesn’t reflect highly-influential events at earlier stages (e.g., a product demo request or free account registration, which didn’t immediately lead to conversion)

  Position-Based Model 

  Position-Based attribution model (also known as the U-shaped model) allocates the biggest credit to the first and the last interaction (40% each). Then distributes the remaining 20% across other touches. 

  For many marketers, that’s the preferred multi-touch attribution model as it allows optimising both ToFU and BoFU channels. 

  Pros 

  • Helps establish the main channels for lead generation and conversion
  • Adds extra layers of visibility, compared to first- and last-touch attribution models 
  • Promotes budget allocation toward the most strategic touchpoints

  Cons 

  • Diminishes the importance of lead nurturing activities as more credit gets assigned to demand-gen and conversion-generation channels
  • Limited flexibility since it always assigns a fixed amount of credit to the first and last touchpoints, and the remaining credit is divided evenly among the other touchpoints

  How to Choose the Right Multi-Touch Attribution Model For Your Business 

  If you’re deciding which attribution model is best for your business, prepare for a heated discussion. Each one has its trade-offs as it emphasises or devalues the role of different channels and marketing activities.

  To reach a consensus, the best strategy is to evaluate each model against three criteria : Your marketing objectives, sales cycle length and data availability. 

  Marketing Objectives 

  Businesses generate revenue in many ways : Through direct sales, subscriptions, referral fees, licensing agreements, one-off or retainer services. Or any combination of these activities. 

  In each case, your marketing strategy will look different. For example, SaaS and direct-to-consumer (DTC) eCommerce brands have to maximise both demand generation and conversion rates. In contrast, a B2B cybersecurity consulting firm is more interested in attracting qualified leads (as opposed to any type of traffic) and progressively nurturing them towards a big-ticket purchase. 

  When selecting a multi-touch attribution model, prioritise your objectives first. Create a simple scoreboard, where your team ranks various channels and campaign types you rely on to close sales. 

  Alternatively, you can survey your customers to learn how they first heard about your company and what eventually triggered their conversion. Having data from both sides can help you cross-validate your assumptions and eliminate some biases. 

  Then consider which model would best reflect the role and importance of different channels in your sales cycle. Speaking of which….

  Sales Cycle Length 

  As shoppers, we spend less time deciding on a new toothpaste brand versus contemplating a new IT system purchase. Factors like industry, business model (B2C, DTC, B2B, B2BC), and deal size determine the average cycle length in your industry. 

  Statistically, low-ticket B2C sales can happen within just several interactions. The average B2B decision-making process can have over 15 steps, spread over several months. 

  That’s why not all multi-touch attribution models work equally well for each business. Time-decay suits better B2B companies, while B2C usually go for position-based or linear attribution. 

  Data Availability 

  Businesses struggle with multi-touch attribution model implementation due to incomplete analytics data. 

  Our web analytics tool captures more data than Google Analytics. That’s because we rely on a privacy-focused tracking mechanism, which allows you to collect analytics without showing a cookie consent banner in markets outside of Germany and the UK. 

  Cookie consent banners are mandatory with Google Analytics. Yet, almost 40% of global consumers reject it. This results in gaps in your analytics and subsequent inconsistencies in multi-touch attribution reports. With Matomo, you can compliantly collect more data for accurate reporting. 

  Some companies also struggle to connect collected insights to individual shoppers. With Matomo, you can cross-attribute users across browning sessions, using our visitors’ tracking feature. 

  When you already know a user’s identifier (e.g., full name or email address), you can track their on-site behaviours over time to better understand how they interact with your content and complete their purchases. Quick disclaimer, though, visitors’ tracking may not be considered compliant with certain data privacy laws. Please consult with a local authority if you have doubts. 

  How to Implement Multi-Touch Attribution

  Multi-touch attribution modelling implementation is like a “seek and find” game. You have to identify all significant touchpoints in your customers’ journeys. And sometimes also brainstorm new ways to uncover the missing parts. Then figure out the best way to track users’ actions at those stages (aka do conversion and events tracking). 

  Here’s a step-by-step walkthrough to help you get started. 

  Select a Multi-Touch Attribution Tool 

  The global marketing attribution software is worth $3.1 billion. Meaning there are plenty of tools, differing in terms of accuracy, sophistication and price.

  To make the right call prioritise five factors :

  • Available models : Look for a solution that offers multiple options and allows you to experiment with different modelling techniques or develop custom models. 
  • Implementation complexity : Some providers offer advanced data modelling tools for creating custom multi-touch attribution models, but offer few out-of-the-box modelling options. 
  • Accuracy : Check if the shortlisted tool collects the type of data you need. Prioritise providers who are less dependent on third-party cookies and allow you to identify repeat users. 
  • Your marketing stack : Some marketing attribution tools come with useful add-ons such as tag manager, heatmaps, form analytics, user session recordings and A/B testing tools. This means you can collect more data for multi-channel modelling with them instead of investing in extra software. 
  • Compliance : Ensure that the selected multi-attribution analytics software wouldn’t put you at risk of GDPR non-compliance when it comes to user privacy and consent to tracking/analysis. 

  Finally, evaluate the adoption costs. Free multi-channel analytics tools come with data quality and consistency trade-offs. Premium attribution tools may have “hidden” licensing costs and bill you for extra data integrations. 

  Look for a tool that offers a good price-to-value ratio (i.e., one that offers extra perks for a transparent price). 

  Set Up Proper Data Collection 

  Multi-touch attribution requires ample user data. To collect the right type of insights you need to set up : 

  • Website analytics : Ensure that you have all tracking codes installed (and working correctly !) to capture pageviews, on-site actions, referral sources and other data points around what users do on page. 
  • Tags : Add tracking parameters to monitor different referral channels (e.g., “facebook”), campaign types (e.g., ”final-sale”), and creative assets (e.g., “banner-1”). Tags help you get a clearer picture of different touchpoints. 
  • Integrations : To better identify on-site users and track their actions, you can also populate your attribution tool with data from your other tools – CRM system, A/B testing app, etc. 

  Finally, think about the ideal lookback window — a bounded time frame you’ll use to calculate conversions. For example, Matomo has a default windows of 7, 30 or 90 days. But you can configure a custom period to better reflect your average sales cycle. For instance, if you’re selling makeup, a shorter window could yield better results. But if you’re selling CRM software for the manufacturing industry, consider extending it.

  Configure Goals and Events 

  Goals indicate your main marketing objectives — more traffic, conversions and sales. In web analytics tools, you can measure these by tracking specific user behaviours. 

  For example : If your goal is lead generation, you can track :

  • Newsletter sign ups 
  • Product demo requests 
  • Gated content downloads 
  • Free trial account registration 
  • Contact form submission 
  • On-site call bookings 

  In each case, you can set up a unique tag to monitor these types of requests. Then analyse conversion rates — the percentage of users who have successfully completed the action. 

  To collect sufficient data for multi-channel attribution modelling, set up Goal Tracking for different types of touchpoints (MoFU & BoFU) and asset types (contact forms, downloadable assets, etc). 

  Your next task is to figure out how users interact with different on-site assets. That’s when Event Tracking comes in handy. 

  Event Tracking reports notify you about specific actions users take on your website. With Matomo Event Tracking, you can monitor where people click on your website, on which pages they click newsletter subscription links, or when they try to interact with static content elements (e.g., a non-clickable banner). 

  Using in-depth user behavioural reports, you can better understand which assets play a key role in the average customer journey. Using this data, you can localise “leaks” in your sales funnel and fix them to increase conversion rates.

  Test and Validated the Selected Model 

  A common challenge of multi-channel attribution modelling is determining the correct correlation and causality between exposure to touchpoints and purchases. 

  For example, a user who bought a discounted product from a Facebook ad would act differently than someone who purchased a full-priced product via a newsletter link. Their rate of pre- and post-sales exposure will also differ a lot — and your attribution model may not always accurately capture that. 

  That’s why you have to continuously test and tweak the selected model type. The best approach for that is lift analysis. 

  Lift analysis means comparing how your key metrics (e.g., revenue or conversion rates) change among users who were exposed to a certain campaign versus a control group. 

  In the case of multi-touch attribution modelling, you have to monitor how your metrics change after you’ve acted on the model recommendations (e.g., invested more in a well-performing referral channel or tried a new brand awareness Twitter ad). Compare the before and after ROI. If you see a positive dynamic, your model works great. 

  The downside of this approach is that you have to invest a lot upfront. But if your goal is to create a trustworthy attribution model, the best way to validate is to act on its suggestions and then test them against past results. 

  Conclusion

  A multi-touch attribution model helps you measure the impact of different channels, campaign types, and marketing assets on metrics that matter — conversion rate, sales volumes and ROI. 

  Using this data, you can invest budgets into the best-performing channels and confidently experiment with new campaign types. 

  As a Matomo user, you also get to do so without breaching customers’ privacy or compromising on analytics accuracy.

  Start using accurate multi-channel attribution in Matomo. Get your free 21-day trial now. No credit card required.