Recherche avancée

Sur d’autres sites (9330)

• Set correct start time of ts-file using ffmpeg

  9 octobre 2020, par Daniel

  I am splitting up a video into multiple 10 second ts-parts (mpeg-ts format) using ffmpeg on windows.

  



  To create the 2nd part (that starts at 10 seconds into the video and ends at 20 seconds into the video) :

  



  ffmpeg -i sample.avi -ss 00:00:10 -to 00:00:20 -vcodec libx264 -acodec aac -vf scale=426:-1 out1.ts


  



  But when i check the file using ffprobe it says :

  



  Duration: 00:00:10.02, start: 1.458667, bitrate: 359 kb/s


  



  So the duration is ok but the start time is incorrect. Is it anyway i can use ffmpeg to correct it to 00:00:20 ?
The best solution would of course to be able to set the correct start time in my first command where i take out the 10 second part but i would also be ok with running a 2nd command to fix the time.

  



  Is this possible ? Cant find any documentation and all examples i found are not for my exact problem and don't seem to work then i play around with them.

  



  Full output from ffprobe :

  



  ffprobe.exe out1.ts
ffprobe version git-2020-02-06-343ccfc Copyright (c) 2007-2020 the FFmpeg developers
  built with gcc 9.2.1 (GCC) 20200122
  configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt --enable-amf
  libavutil      56. 39.100 / 56. 39.100
  libavcodec     58. 68.100 / 58. 68.100
  libavformat    58. 38.100 / 58. 38.100
  libavdevice    58.  9.103 / 58.  9.103
  libavfilter     7. 74.100 /  7. 74.100
  libswscale      5.  6.100 /  5.  6.100
  libswresample   3.  6.100 /  3.  6.100
  libpostproc    55.  6.100 / 55.  6.100
Input #0, mpegts, from 'out1.ts':
  Duration: 00:00:10.02, start: 1.458667, bitrate: 359 kb/s
  Program 1
    Metadata:
      service_name    : Service01
      service_provider: FFmpeg
    Stream #0:0[0x100]: Video: h264 (High) ([27][0][0][0] / 0x001B), yuv420p(progressive), 426x260 [SAR 780:781 DAR 18:11], 25 fps, 25 tbr, 90k tbn, 50 tbc
    Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 131 kb/s


  


• Compilied Ffmpeg not accepting -c:v and -c:a

  2 février 2020, par King Horse

  I complied FFMPEG with libsrt, with the online compile guide. https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu & how to compile ffmpeg with enabling libsrt

  It seems to compile correctly.

  ffmpeg version N-96575-g843c24a Copyright (c) 2000-2020 the FFmpeg developers
  
  built with gcc 7 (Ubuntu 7.4.0-1ubuntu1~18.04.1)
  
  configuration: --prefix=/home/ubuntu/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/ubuntu/ffmpeg_build/include --extra-ldflags=-L/home/ubuntu/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/ubuntu/bin --enable-gpl --enable-libaom --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libsrt --enable-nonfree
  
  libavutil      56. 38.100 / 56. 38.100
  
  libavcodec     58. 67.100 / 58. 67.100
  
  libavformat    58. 37.100 / 58. 37.100
  
  libavdevice    58.  9.103 / 58.  9.103
  
  libavfilter     7. 72.100 /  7. 72.100
  
  libswscale      5.  6.100 /  5.  6.100
  
  libswresample   3.  6.100 /  3.  6.100
  
  libpostproc    55.  6.100 / 55.  6.100

  But when running this command to convert a incoming srt stream to HLS, it doesn’t know the -c:a command. When switching the order, it runs that it doesn’t know about the -c:v command.

  ffmpeg -re -i srt://0.0.0.0:25000?pkt_size=1316&mode=listener -c:a copy -c:v copy -strict -f hls -hls_time 4 -hls_playlist_type event stream.m3u8

  ~$ ffmpeg -re -i srt://0.0.0.0:25000?pkt_size=1316&mode=listener -c:a copy -c:v copy -strict -f hls -hls_time 4 -hls_playlist_type event stream.m3u8
  
  [2] 9930
  
  ffmpeg version N-96575-g843c24a Copyright (c) 2000-2020 the FFmpeg developers
  
    built with gcc 7 (Ubuntu 7.4.0-1ubuntu1~18.04.1)
  
    configuration: --prefix=/home/ubuntu/ffmpeg_build --pkg-config-flags=--static --extra-cflags=-I/home/ubuntu/ffmpeg_build/include --extra-ldflags=-L/home/ubuntu/ffmpeg_build/lib --extra-libs='-lpthread -lm' --bindir=/home/ubuntu/bin --enable-gpl --enable-libaom --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libsrt --enable-nonfree
  
    libavutil      56. 38.100 / 56. 38.100
  
    libavcodec     58. 67.100 / 58. 67.100
  
    libavformat    58. 37.100 / 58. 37.100
  
    libavdevice    58.  9.103 / 58.  9.103
  
    libavfilter     7. 72.100 /  7. 72.100
  
    libswscale      5.  6.100 /  5.  6.100
  
    libswresample   3.  6.100 /  3.  6.100
  
    libpostproc    55.  6.100 / 55.  6.100
  
  -c:a: command not found
  
  
  
  [2]+  Stopped                 ffmpeg -re -i srt://0.0.0.0:25000?pkt_size=1316

  I have searched the issue, but I could not find anything similar.
  Does someone what I have missed in the setup ?

  Everything is manual complied through the guide, this was the final command I run to compile FFMPEG :

  cd ~/ffmpeg_sources && \
  
  wget -O ffmpeg-snapshot.tar.bz2 https://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2 && \
  
  tar xjvf ffmpeg-snapshot.tar.bz2 && \
  
  cd ffmpeg && \
  
  PATH="$HOME/bin:$PATH" PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure \
  
    --prefix="$HOME/ffmpeg_build" \
  
    --pkg-config-flags="--static" \
  
    --extra-cflags="-I$HOME/ffmpeg_build/include" \
  
    --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
  
    --extra-libs="-lpthread -lm" \
  
    --bindir="$HOME/bin" \
  
    --enable-gpl \
  
    --enable-libaom \
  
    --enable-libass \
  
    --enable-libfdk-aac \
  
    --enable-libfreetype \
  
    --enable-libmp3lame \
  
    --enable-libopus \
  
    --enable-libvorbis \
  
    --enable-libvpx \
  
    --enable-libx264 \
  
    --enable-libx265 \
  
    --enable-libsrt \
  
    --enable-nonfree && \
  
  PATH="$HOME/bin:$PATH" make && \
  
  make install && \
  
  hash -r

• python suggests ffmpeg installation when it is installed

  17 janvier 2021, par FNTE

  I have a problem related to the bar_chart_race python package. I have installed ffmpeg but when I execute my code, I get :

  


  You do not have ffmpeg installed on your machine. 
Download from here: https://www.ffmpeg.org/download.html.


  


  I know that I have used this package before and it was all good. I have installed ffmpeg version :

  


  ffmpeg -version
ffmpeg version 4.2.3 Copyright (c) 2000-2020 the FFmpeg developers
built with gcc 9.3.1 (GCC) 20200523


  


  Do you know what I can do ? I have bin folder in path.