Recherche avancée

Sur d’autres sites (10173)

• ffmpeg convert from H.264 (High 4:2:2 Profile) MOV to H.264 (Baseline Profile) MP4

  26 juillet 2022, par froniq

  How can I convert a video (MOV) from H.264 (High 4:2:2 Profile) to H.264 (Baseline Profile) MP4 using ffmpeg ?
I would run that mp4 video on android mobile in a VideoView to support as many mobile types as possible.

  


  I can't do that with this command : ffmpeg -i o1.mov -c:v libx264 -profile:v baseline -c:a aac -ar 44100 -ac 2 -b:a 128k out.mp4.

  


  That'd return an error :

  


  ffmpeg version 5.0.1-essentials_build-www.gyan.dev Copyright (c) 2000-2022 the FFmpeg developers
  built with gcc 11.2.0 (Rev7, Built by MSYS2 project)
  configuration: --enable-gpl --enable-version3 --enable-static --disable-w32threads --disable-autodetect --enable-fontconfig --enable-iconv --enable-gnutls --enable-libxml2 --enable-gmp --enable-lzma --enable-zlib --enable-libsrt --enable-libssh --enable-libzmq --enable-avisynth --enable-sdl2 --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libaom --enable-libopenjpeg --enable-libvpx --enable-libass --enable-libfreetype --enable-libfribidi --enable-libvidstab --enable-libvmaf --enable-libzimg --enable-amf --enable-cuda-llvm --enable-cuvid --enable-ffnvcodec --enable-nvdec --enable-nvenc --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-libgme --enable-libopenmpt --enable-libopencore-amrwb --enable-libmp3lame --enable-libtheora --enable-libvo-amrwbenc --enable-libgsm --enable-libopencore-amrnb --enable-libopus --enable-libspeex --enable-libvorbis --enable-librubberband
  libavutil      57. 17.100 / 57. 17.100
  libavcodec     59. 18.100 / 59. 18.100
  libavformat    59. 16.100 / 59. 16.100
  libavdevice    59.  4.100 / 59.  4.100
  libavfilter     8. 24.100 /  8. 24.100
  libswscale      6.  4.100 /  6.  4.100
  libswresample   4.  3.100 /  4.  3.100
  libpostproc    56.  3.100 / 56.  3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'o1.mov':
  Metadata:
    major_brand     : qt
    minor_version   : 537199360
    compatible_brands: qt
    creation_time   : 2022-07-19T16:56:39.000000Z
  Duration: 00:00:07.72, start: 0.000000, bitrate: 117473 kb/s
  Stream #0:0[0x1](eng): Video: prores (Standard) (apcn / 0x6E637061), yuv422p10le(tv, bt709, progressive), 1080x1920, 114850 kb/s, SAR 1:1 DAR 9:16, 23.98 fps, 23.98 tbr, 24k tbn (default)
    Metadata:
      creation_time   : 2022-07-19T16:56:39.000000Z
      handler_name    : Apple Video Media Handler
      vendor_id       : appl
      encoder         : Apple ProRes 422
      timecode        : 00:00:00:04
  Stream #0:1[0x2](eng): Audio: pcm_s16le (sowt / 0x74776F73), 48000 Hz, stereo, s16, 1536 kb/s (default)
    Metadata:
      creation_time   : 2022-07-19T16:56:39.000000Z
      handler_name    : Apple Sound Media Handler
      vendor_id       :
      timecode        : 00:00:00:04
  Stream #0:2[0x3](eng): Data: none (tmcd / 0x64636D74), 0 kb/s (default)
    Metadata:
      creation_time   : 2022-07-19T16:56:39.000000Z
      handler_name    : Time Code Media Handler
      timecode        : 00:00:00:04
Stream mapping:
  Stream #0:0 -> #0:0 (prores (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (pcm_s16le (native) -> aac (native))
Press [q] to stop, [?] for help
x264 [error]: baseline profile doesn't support 4:2:2
[libx264 @ 0000014713a31ac0] Error setting profile baseline.
[libx264 @ 0000014713a31ac0] Possible profiles: baseline main high high10 high422 high444
Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
Conversion failed!


  


• Ffmpeg stream works from cli but not inside bash script, no errors

  21 juillet 2022, par Sidharth Rao

  I'm running an Ffmpeg stream on Ubuntu writing to an rtp address, and it appears to work perfectly from my cli every time but fails to actually write anything from inside a bash script. After running from inside the cli, the bash script works every time I run it for about the next 5 minutes and then starts failing without errors again.

  


  Here is the command :

  


  ffmpeg -i video.mp4 -fflags nobuffer -flags low_delay -s 640x480 -c:v libx264 -profile:v baseline -b:v 2M -r 24 -g 60 -an -rtsp_transport tcp -f rtp rtp://CENSOREDCENSORED:0000


  


  Here is the bash script :

  


  #!/bin/bash

ffmpeg -i video.mp4 -fflags nobuffer -flags low_delay -s 640x480 -c:v libx264 -profile:v baseline -b:v 2M -r 24 -g 60 -an -rtsp_transport tcp -f rtp rtp://CENSOREDCENSORED:0000


  


  And here is the same output to cli for both of them :

  


  ffmpeg version 3.4.11-0ubuntu0.1 Copyright (c) 2000-2022 the FFmpeg developers
  built with gcc 7 (Ubuntu 7.5.0-3ubuntu1~18.04)
  configuration: --prefix=/usr --extra-version=0ubuntu0.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared
  libavutil      55. 78.100 / 55. 78.100
  libavcodec     57.107.100 / 57.107.100
  libavformat    57. 83.100 / 57. 83.100
  libavdevice    57. 10.100 / 57. 10.100
  libavfilter     6.107.100 /  6.107.100
  libavresample   3.  7.  0 /  3.  7.  0
  libswscale      4.  8.100 /  4.  8.100
  libswresample   2.  9.100 /  2.  9.100
  libpostproc    54.  7.100 / 54.  7.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'out.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.76.100
  Duration: 00:00:26.00, start: 0.000000, bitrate: 227 kb/s
    Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x480, 226 kb/s, 2.31 fps, 2.31 tbr, 18464 tbn, 4.62 tbc (default)
    Metadata:
      handler_name    : VideoHandler
Stream mapping:
  Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
Press [q] to stop, [?] for help
[libx264 @ 0x5585318623c0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x5585318623c0] profile Constrained Baseline, level 3.0
Output #0, rtp, to 'rtp://us.robotics.cognitedata.com:5005':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf57.83.100
    Stream #0:0(und): Video: h264 (libx264), yuv420p, 640x480, q=-1--1, 2000 kb/s, 24 fps, 90k tbn, 24 tbc (default)
    Metadata:
      handler_name    : VideoHandler
      encoder         : Lavc57.107.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/2000000 buffer size: 0 vbv_delay: -1
SDP:
v=0
o=- 0 0 IN IP4 127.0.0.1
s=No Name
c=IN IP4 20.232.153.224
t=0 0
a=tool:libavformat 57.83.100
m=video 5005 RTP/AVP 96
b=AS:2000
a=rtpmap:96 H264/90000
a=fmtp:96 packetization-mode=1

frame=  624 fps=194 q=-1.0 Lsize=    6288kB time=00:00:25.95 bitrate=1984.3kbits/s dup=564 drop=0 speed=8.08x
video:6226kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.992690%
[libx264 @ 0x5585318623c0] frame I:11    Avg QP: 2.77  size:132437
[libx264 @ 0x5585318623c0] frame P:613   Avg QP: 4.97  size:  8024
[libx264 @ 0x5585318623c0] mb I  I16..4: 20.2%  0.0% 79.8%
[libx264 @ 0x5585318623c0] mb P  I16..4:  0.8%  0.0%  2.0%  P16..4: 12.3%  1.0%  1.2%  0.0%  0.0%    skip:82.6%
[libx264 @ 0x5585318623c0] final ratefactor: 6.07
[libx264 @ 0x5585318623c0] coded y,uvDC,uvAC intra: 87.7% 87.0% 68.2% inter: 8.6% 7.0% 6.6%
[libx264 @ 0x5585318623c0] i16 v,h,dc,p: 34% 15% 41% 10%
[libx264 @ 0x5585318623c0] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 43% 24% 13%  3%  3%  3%  4%  3%  4%
[libx264 @ 0x5585318623c0] i8c dc,h,v,p: 36% 22% 37%  6%
[libx264 @ 0x5585318623c0] ref P L0: 97.5%  1.9%  0.6%
[libx264 @ 0x5585318623c0] kb/s:1961.69


  


  The ffmpeg stream also fails from inside of a docker image.

  


• Minimal sample of muxing two streams with no reencoding (av_interleaved_write_frame fails)

  19 juillet 2022, par Alvein

  What I'm trying to do : having two files, one is video-only and the other is audio-only, with identical durations, I want to "join" them in a single container.

  


  I previously made a routine which just copied all the streams inside a container to another one. No reencoding, etc. This works perfectly :

  


  while(true) {
    pkIn=av_packet_alloc();
    if(NULL==pkIn) {
        fprintf(stderr,"av_packet_alloc() failed");
        break;
    }
    iError=av_read_frame(fcIn,pkIn);
    if(0>iError)
        if(AVERROR_EOF==iError)
            break;
        else {
            fprintf(stderr,"av_read_frame() failed");
            break;
        }
    stIn=fcIn->streams[pkIn->stream_index];
    stOut=fcOut->streams[pkIn->stream_index];
    log_packet(fcIn,pkIn,"in");
    av_packet_rescale_ts(pkIn,stIn->time_base,stOut->time_base);
    pkIn->pos=-1;
    log_packet(fcOut,pkIn,"out");
    iError=av_interleaved_write_frame(fcOut,pkIn);
    if(0>iError) {
        fprintf(stderr,"av_interleaved_write_frame() failed");
        break;
    }
    av_packet_free(&pkIn);
}


  


  I just did the analogy and tried to do the same, but taking each stream from a distinct container, like this :

  


  while(true) {
    if(!bVideoInEOF) {
        pkVideoIn=av_packet_alloc();
        if(NULL==pkVideoIn) {
            fprintf(stderr,"av_packet_alloc(video in) failed");
            break;
        }
        iError=av_read_frame(fcVideoIn,pkVideoIn);
        if(0>iError)
            if(AVERROR_EOF==iError)
                bVideoInEOF=true;
            else {
                fprintf(stderr,"av_read_frame(video in) failed");
                break;
            }
        if(!bVideoInEOF) {
            log_packet(fcVideoIn,pkVideoIn,"video in");
            av_packet_rescale_ts(pkVideoIn,stVideoIn->time_base,stVideoOut->time_base);
            pkVideoIn->pos=-1;
            pkVideoIn->stream_index=stVideoOut->index; // Edit (2022-07-19)
            log_packet(fcVideoIn,pkVideoIn,"video out");
            iError=av_interleaved_write_frame(fcOut,pkVideoIn);
            if(0>iError) {
                fprintf(stderr,"av_interleaved_write_frame(video out) failed");
                break;
            }
        }
        av_packet_free(&pkVideoIn);
    }
    if(!bAudioInEOF) {
        pkAudioIn=av_packet_alloc();
        if(NULL==pkAudioIn) {
            fprintf(stderr,"av_packet_alloc(audio in) failed");
            break;
        }
        iError=av_read_frame(fcAudioIn,pkAudioIn);
        if(0>iError)
            if(AVERROR_EOF==iError)
                bAudioInEOF=true;
            else {
                fprintf(stderr,"av_read_frame(audio in) failed");
                break;
            }
        if(!bAudioInEOF) {
            log_packet(fcAudioIn,pkAudioIn,"audio in");
            av_packet_rescale_ts(pkAudioIn,stAudioIn->time_base,stAudioOut->time_base);
            pkAudioIn->pos=-1;
            pkAudioIn->stream_index=stAudioOut->index; // Edit (2022-07-19)
            log_packet(fcAudioIn,pkAudioIn,"audio out");
            iError=av_interleaved_write_frame(fcOut,pkAudioIn);
            if(0>iError) {
                fprintf(stderr,"av_interleaved_write_frame(audio out) failed");
                break;
            }
        }
        av_packet_free(&pkAudioIn);
    }
    if(bVideoInEOF&&bAudioInEOF)
        break;
}


  


  I know the previous code looks like redundant but I wanted to leave both streams "processing" separated the way you understand my plans.

  


  Anyway, that code ends quickly with "av_interleaved_write_frame(audio out) failed".

  


  The error detail is "Invalid argument", and the debugger shows this :

  


  


  Application provided invalid, non monotonically increasing dts to
muxer in stream 0.

  


  


  If I disable any of the main blocks "if(!bVideoInEOF)" / "if(!bAudioInEOF)", the file is written successfully, with the obvious lack of the disabled stream.

  


  I'm new into using this library so probably I'm doing something really stupid, or missing something obvious.

  


  Suggestions ?

  


  Edit (2022-07-19) :

  


  By checking the logs, I noticed I was writing every frame to the stream #0. Hence, the horrible jumps in PTS/DTS.

  


  Code edited by adding the corresponding "...->stream_index=" before each call to av_interleaved_write_frame().

  


  ...

  


  Though it works, I still think my code is far from perfect. Comments are welcome.