Recherche avancée

Sur d’autres sites (8343)

• Moviepy not updating FFmpeg Version after FFmpeg Install ?

  31 mai 2024, par The_ Game12

  I've been toying around with MoviePy, and recently switched a project to a new computer at home to continue messing around with it. However, I tried running what I had previously written (which ran perfectly fine on the other computer) and I get this :

  


  OSError: MoviePy error: failed to read the first frame of video file ./Gameplay/minecraft-
gameplay2.mp4. That might mean that the file is corrupted. That may also mean that you are using 
a deprecated version of FFMPEG. On Ubuntu/Debian for instance the version in the repos is 
deprecated. Please update to a recent version from the website.



  


  After reading the error, I did as it instructed, and updated my FFmpeg :

  


  $ ffmpeg
ffmpeg version N-115387-g8e27bd025f-20240525 Copyright (c) 2000-2024 the FFmpeg developers
  built with gcc 13.2.0 (crosstool-NG 1.26.0.65_ecc5e41)
  configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-ffbuild-linux-gnu- --arch=x86_64 --target-os=linux --enable-gpl --enable-version3 --disable-debug --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-openssl --enable-fontconfig --enable-libharfbuzz --enable-libvorbis --enable-opencl --enable-libpulse --enable-libvmaf --enable-libxcb --enable-xlib --enable-amf --enable-libaom --enable-libaribb24 --enable-avisynth --enable-chromaprint --enable-libdav1d --enable-libdavs2 --enable-libdvdread --enable-libdvdnav --disable-libfdk-aac --enable-ffnvcodec --enable-cuda-llvm --enable-frei0r --enable-libgme --enable-libkvazaar --enable-libaribcaption --enable-libass --enable-libbluray --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librist --enable-libssh --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libvpl --enable-openal --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopenmpt --enable-librav1e --enable-librubberband --disable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --enable-libdrm --enable-vaapi --enable-libvidstab --enable-vulkan --enable-libshaderc --enable-libplacebo --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --enable-libzvbi --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-libs='-ldl -lgomp' --extra-ldflags=-pthread --extra-ldexeflags=-pie --cc=x86_64-ffbuild-linux-gnu-gcc --cxx=x86_64-ffbuild-linux-gnu-g++ --ar=x86_64-ffbuild-linux-gnu-gcc-ar --ranlib=x86_64-ffbuild-linux-gnu-gcc-ranlib --nm=x86_64-ffbuild-linux-gnu-gcc-nm --extra-version=20240525
  libavutil      59. 20.100 / 59. 20.100
  libavcodec     61.  5.104 / 61.  5.104
  libavformat    61.  3.104 / 61.  3.104
  libavdevice    61.  2.100 / 61.  2.100
  libavfilter    10.  2.102 / 10.  2.102
  libswscale      8.  2.100 /  8.  2.100
  libswresample   5.  2.100 /  5.  2.100
  libpostproc    58.  2.100 / 58.  2.100
Universal media converter
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...


  


  And I continued getting the same error. So I looked at what version my moviepy was using, and it was still 4.X. I read somewhere that your FFmpeg version is determined on the first use, which made sense, so I uninstalled and reinstalled, to get the same error.

  


  I am honestly lost at this point, as I have the newest version of FFmpeg, but I still get this from moviepy :

  


  >>> import moviepy&#xA;>>> print(moviepy.config.FFPMEG_BINARY)&#xA;ffmpeg : /home/<username>/.local/lib/python3.9/site-packages/imageio_ffmpeg/binaries/ffmpeg-linux64-v4.2.2&#xA;</username>

  


  Any Ideas as to what I'm doing wrong ?

  


  (Note : I'm using Crostini which I believe is using an Ubuntu or Ubuntu-Like shell)

  


  Thanks :)

  


• ffmpeg fast seek large MP4 over HTTP

  28 juillet 2024, par Gmanicus

  I'm attempting to download snapshots from a video provided by the U.S House of Representatives :

  


  https://houseliveprod-f9h4cpb9dyb8gegg.a01.azurefd.net/east/2024-04-11T08-55-12_Download/video_3000000_1.mp4


  


  I am using fluent-ffmpeg in Node to execute this command :

  


  ffmpeg('https://houseliveprod-f9h4cpb9dyb8gegg.a01.azurefd.net/east/2024-04-11T08-55-12_Download/video_3000000_1.mp4')
  .inputOption(`-ss 03:33:33`)
  .outputOptions([
     '-vframes 1'
  ])
  .output('test.png')

// Effectively:
// ffmpeg -ss 03:33:33 -i  -y -vframes 1 test.png


  


  My intention is to fast-seek to the desired timestamp and take a snapshot over HTTP. However, when doing so, the performance is not great. A snapshot takes about 10s per 3hrs of video and seems to increase fairly linearly at that rate.

  


  However, when using ffmpeg on the same video locally, it's super fast ! Sub-500ms regardless of the desired timestamp.

  


  Is there some magic that could be done via ffmpeg options or perhaps some sort of technique with manual requests to get a snapshot at the desired segment of video more efficiently ?

  


• ffmpeg Command in Docker with Rust Tokio Closes Warp Server Connection (curl 52 Error)

  3 juin 2024, par user762345

  I’m encountering an issue where executing an ffmpeg concatenation command through Rust’s Tokio process in a Docker container causes subsequent HTTP requests to fail. The error occurs exclusively after running the ffmpeg command and making immediate requests, resulting in a “curl 52 empty response from server” error with the connection being closed. Notably, this issue does not occur when running the same setup outside of Docker. Additionally, if no HTTP requests are made after the ffmpeg command, the curl 52 error does not occur.

  


  Here is the verbose curl output of my minimum reproducible example (see below).

  


  curl -v "http://localhost:3030"
*   Trying 127.0.0.1:3030...
* Connected to localhost (127.0.0.1) port 3030 (#0)
> GET / HTTP/1.1
> Host: localhost:3030
> User-Agent: curl/8.1.2
> Accept: */*
> 
* Empty reply from server
* Closing connection 0
curl: (52) Empty reply from server


  


  Here are Docker logs from my minimum reproducible example (see below). The wav files are concatenated successfully, then the container appears to rebuild.

  


  [2024-06-03T05:26:58Z INFO  minimal_docker_webserver_post_error] Starting server on 0.0.0.0:3030
[2024-06-03T05:26:58Z INFO  warp::server] Server::run; addr=0.0.0.0:3030
[2024-06-03T05:26:58Z INFO  warp::server] listening on http://0.0.0.0:3030
[2024-06-03T05:27:07Z INFO  minimal_docker_webserver_post_error] WAV files concatenated successfully
[Running 'cargo run']
    Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.06s
     Running `target/debug/minimal_docker_webserver_post_error`
[2024-06-03T05:27:08Z INFO  minimal_docker_webserver_post_error] Starting server on 0.0.0.0:3030
[2024-06-03T05:27:08Z INFO  warp::server] Server::run; addr=0.0.0.0:3030
[2024-06-03T05:27:08Z INFO  warp::server] listening on http://0.0.0.0:3030


  


  What I have tried :
I tried using different web frameworks (Warp, Actix-web) and request crates (reqwest, ureq). I also tried running the setup outside of Docker, which worked as expected without any issues. Additionally, I tried running the setup in Docker without making any HTTP requests after the ffmpeg command, and the connection closed successfully without errors. I also tried posting to httpbin with a minimal request, but the issue persisted.

  


  Minimum reproducible example :

  


  main.rs

  


  use warp::Filter;&#xA;use reqwest::Client;&#xA;use std::convert::Infallible;&#xA;use log::{info, error};&#xA;use env_logger;&#xA;use tokio::process::Command;&#xA;&#xA;#[tokio::main]&#xA;async fn main() {&#xA;    std::env::set_var("RUST_LOG", "debug");&#xA;    env_logger::init();&#xA;&#xA;    let route = warp::path::end()&#xA;        .and_then(handle_request);&#xA;&#xA;    info!("Starting server on 0.0.0.0:3030");&#xA;    warp::serve(route)&#xA;        .run(([0, 0, 0, 0], 3030))&#xA;        .await;&#xA;}&#xA;&#xA;async fn handle_request() -> Result<impl infallible="infallible"> {&#xA;    let client = Client::new();&#xA;&#xA;    let output = Command::new("ffmpeg")&#xA;        .args(&amp;[&#xA;            "y",&#xA;            "-i", "concat:/usr/src/minimal_docker_webserver_post_error/file1.wav|/usr/src/minimal_docker_webserver_post_error/file2.wav",&#xA;            "-c", "copy",&#xA;            "/usr/src/minimal_docker_webserver_post_error/combined.wav"&#xA;        ])&#xA;        .output()&#xA;        .await;&#xA;&#xA;    match output {&#xA;        Ok(output) => {&#xA;            if output.status.success() {&#xA;                info!("WAV files concatenated successfully");&#xA;            } else {&#xA;                error!("Failed to concatenate WAV files: {:?}", output);&#xA;                return Ok(warp::reply::with_status("Failed to concatenate WAV files", warp::http::StatusCode::INTERNAL_SERVER_ERROR));&#xA;            }&#xA;        },&#xA;        Err(e) => {&#xA;            error!("Failed to execute ffmpeg: {:?}", e);&#xA;            return Ok(warp::reply::with_status("Failed to execute ffmpeg", warp::http::StatusCode::INTERNAL_SERVER_ERROR));&#xA;        }&#xA;    }&#xA;&#xA;    // ISSUE: Connection closes with curl: (52) Empty reply from server&#xA;    match client.get("https://httpbin.org/get").send().await {&#xA;        Ok(response) => info!("GET request successful: {:?}", response),&#xA;        Err(e) => error!("GET request failed: {:?}", e),&#xA;    }&#xA;&#xA;    match client.post("https://httpbin.org/post")&#xA;        .body("field1=value1&amp;field2=value2")&#xA;        .send().await {&#xA;        Ok(response) => info!("POST request successful: {:?}", response),&#xA;        Err(e) => error!("POST request failed: {:?}", e),&#xA;    }&#xA;&#xA;    Ok(warp::reply::with_status("Request handled", warp::http::StatusCode::OK))&#xA;}&#xA;</impl>

  


  FFMPEG command to generate the two wav files for concatenation

  


  ffmpeg -f lavfi -i "sine=frequency=1000:duration=5" file1.wav && ffmpeg -f lavfi -i "sine=frequency=500:duration=5" file2.wav


  


  Dockerfile

  


  # Use the official Rust image as the base image
FROM rust:latest

# Install cargo-watch
RUN cargo install cargo-watch

# Install ffmpeg
RUN apt-get update && apt-get install -y ffmpeg

# Set the working directory inside the container
WORKDIR /usr/src/minimal_docker_webserver_post_error

# Copy the Cargo.toml and Cargo.lock files
COPY Cargo.toml Cargo.lock ./

# Copy the source code
COPY src ./src

# Copy wav files
COPY file1.wav /usr/src/minimal_docker_webserver_post_error/file1.wav
COPY file2.wav /usr/src/minimal_docker_webserver_post_error/file2.wav

# Install dependencies
RUN cargo build --release

# Expose the port that the application will run on
EXPOSE 3030

# Set the entry point to use cargo-watch
CMD ["cargo", "watch", "-x", "run"]


  


  Cargo.toml

  


  [package]
name = "minimal_docker_webserver_post_error"
version = "0.1.0"
edition = "2021"

# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html

[dependencies]
warp = "0.3"
reqwest = { version = "0.12.4", features = ["json"] }
tokio = { version = "1", features = ["full"] }
log = "0.4"
env_logger = "0.11.3"


  


  Making the request to the warp server

  


  curl -v "http://localhost:3030"