Recherche avancée

Sur d’autres sites (10474)

• TVHeadend not using codec copy on an IPTV stream ?

  3 avril 2020, par petaire

  So I'm using the great TVHeadend, which is in my case a DVB-T or IPTV server that can record greatly some inputs. This is a great piece of software, which I recommend much.

  



  But I'm a little bit confused in here. So I've set up a tvheadend on a raspberry pi 4, because I need for my work to record a lot of tv programs. I appreciate TVheadend very much on an other installation, and so are my coworkers who also needs to use it and not a CLI only interface (that's relevant you'll see).

  



  So when I'm using a simple ffmpeg command like this :

  



  ffmpeg -err_detect ignore_err -i http://mystream -to 00:10:00 -codec copy /media/partage/dvr/test.mp4


  



  my cpu usage goes to something like 1 or 2% percent. But when I'm trying to replicate that in tvheadend, the cpu goes to 400%, and clearly it's not the same behavior.

  



  Here my stream configuration :

  



  

  



  Here's the result with ffmpeg codec copy :

  



  General
Complete name                            : /Volumes/Share/dvr/test2.mp4
Format                                   : MPEG-4
Format profile                           : Base Media
Codec ID                                 : isom (isom/iso2/avc1/mp41)
File size                                : 58.3 MiB
Duration                                 : 3mn 20s
Overall bit rate                         : 2 436 Kbps
Writing application                      : Lavf58.20.100

Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : Main@L3.1
Format settings                          : 2 Ref Frames
Format settings, CABAC                   : No
Format settings, ReFrames                : 2 frames
Format settings, GOP                     : M=3, N=50
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 3mn 20s
Bit rate                                 : 2 300 Kbps
Width                                    : 1 280 pixels
Height                                   : 720 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 25.000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.100
Stream size                              : 55.0 MiB (94%)
Codec configuration box                  : avcC

Audio
ID                                       : 2
Format                                   : AAC LC
Format/Info                              : Advanced Audio Codec Low Complexity
Codec ID                                 : mp4a-40-2
Duration                                 : 3mn 20s
Bit rate mode                            : Constant
Bit rate                                 : 128 Kbps
Channel(s)                               : 1 channel
Channel layout                           : C
Sampling rate                            : 44.1 KHz
Frame rate                               : 43.066 fps (1024 SPF)
Compression mode                         : Lossy
Stream size                              : 3.07 MiB (5%)
Language                                 : French
Default                                  : Yes
Alternate group                          : 1


  



  And the result with tvheadend :

  



  General
Complete name                            : /Volumes/Share/dvr/2020-04-01/BFMTV/Edition-speciale-BFMTV2020-04-0121-00.mp4
Format                                   : MPEG-4
Format profile                           : Base Media
Codec ID                                 : isom (isom/iso2/avc1/iso6/mp41)
File size                                : 8.40 MiB
Duration                                 : 42s 486ms
Overall bit rate                         : 1 659 Kbps
Movie name                               : Edition spéciale
Writing application                      : Lavf58.20.100

Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High@L3.1
Format settings                          : CABAC / 4 Ref Frames
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 4 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 40s 512ms
Bit rate                                 : 11.9 Kbps
Nominal bit rate                         : 1 500 Kbps
Width                                    : 1 280 pixels
Height                                   : 720 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 25.000 fps
Minimum frame rate                       : 13.885 fps
Maximum frame rate                       : 25.014 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.001
Stream size                              : 58.6 KiB (1%)
Writing library                          : x264 core 155 r2917 0a84d98
Encoding settings                        : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=125 / keyint_min=12 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=abr / mbtree=1 / bitrate=1500 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=1875 / vbv_bufsize=5625 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
Codec configuration box                  : avcC

Audio
ID                                       : 2
Format                                   : AAC LC
Format/Info                              : Advanced Audio Codec Low Complexity
Codec ID                                 : mp4a-40-2
Duration                                 : 42s 486ms
Bit rate mode                            : Constant
Bit rate                                 : 172 bps
Nominal bit rate                         : 172 Kbps
Channel(s)                               : 1 channel
Channel layout                           : C
Sampling rate                            : 48.0 KHz
Frame rate                               : 46.875 fps (1024 SPF)
Compression mode                         : Lossy
Stream size                              : 915 Bytes (0%)
Language                                 : French
Default                                  : Yes
Alternate group                          : 1


  



  As you can see, Tvheadend is making a variable bitrate and variable framerate file, which is really bad for Premiere Pro (which is the main goal for all this). Clearly it's transcoding it, which I don't need, in a format that is worst for my workflow.

  



  My Pi4 is on Raspbian Buster, but I've also tried this with the same unfortunate result on libreelec.

  



  Does anyone has any idea ?

  


• Matomo vs WP-Statistics – which web analytics plugin suits you best ?

  2 avril 2020, par Joselyn Khor — Analytics Tips, Plugins

  Due to the endless choices, you may be wondering which web analytics plugin (GA, Slimstat or WP-Statistics) to choose from on the WordPress directory. If the choice is between WP-Statistics and Matomo for WordPress, we’ve got you covered. Have a look at which could be the best option for you. Our team tested the WP-Statistics plugin to see how it compares. It’s hard not to be biased, but we’ll try our best to give you a fair assessment.

  The main considerations in this article : 

  • General overview
  • General comparison
  • Similarities
  • Differences
  • Three notable feature category comparisons
  • Which tool suits you better ?

  General overview

  What’s Matomo Analytics for WordPress ?

  Matomo for WordPress is a free, privacy-friendly web analytics plugin that lets you understand website visitors and how they behave on your site. With comprehensive insights, you get the opportunity to increase conversions, and the know-how to improve your website. 

  It lets you undertake essential analysis by tracking information, such as, where visitors are coming from, what your most popular pages are, and how visitors are using your site.

  In addition to the fundamentals, the tool also allows for advanced tracking and analysis with features that give you a full understanding of behavioural patterns and website performance. This enables you to optimise your WordPress website to increase sales or engagement.

  It offers a complete analytics package with the bonuses of 100% data ownership, no data sampling, and GDPR compliance. 

  What’s WP-Statistics ?

  WP-Statistics is currently the most used self-hosted WordPress statistics plugin. It provides reports that let you analyse who your visitors are, where they’re coming from, and to an extent what they’re doing on your website.

  Like Matomo for WordPress, it gives you an understanding of your audience which helps you make decisions on how to improve your website for more conversions. 

  As it’s self-hosted on your own WordPress servers it can be seen as a privacy-friendly choice with a few tweaks (more on this below).

  Like Matomo for WordPress, it gives you an understanding of your audience which helps you make decisions on how to improve your website for more conversions. 

  General comparison

  Let’s compare the installation process and the dashboards that get installed in your WordPress.

  Installation

  Both Matomo and WP-Statistics are installed directly in your WordPress so you’ll be able to see your analytics reports right in your WordPress dashboard. You can install them both straight from the WordPress Directory.

  The installation process for both plugins is beginner-friendly. You simply need to find them on the WordPress directory, click on ‘Install Now’, and tracking should start immediately in your WordPress dashboard.

  Dashboard

  For the main Matomo platform you’ll see :

  • Visitors – Overview, Visits Log, Real-time, Real-time Map, Locations, Devices, Software, Times, User IDs, Custom Variables, User Type
  • Behaviour – Pages, Entry Pages, Exit Pages, Page titles, Site Search, Outlinks, Downloads, Events, Contents, Engagement, Transitions, Users Flow, Top Paths, Page Author, Page Location, Page Type, Crawling errors
  • Acquisition – Overview, All Channels, Search Engine & Keywords, Websites, Social Networks, Campaigns, Campaign URL Builder, Crawling overview
  • Ecommerce – Overview, Ecommerce Log, Products, Sales, Multi Attribution
  • Goals – Overview, Multi Attribution, Choose Goals, Manage Goals
  • These may be worded differently from WP-Statistics, but they show you all the information you need to know about your traffic, pages, etc.

  Previous

  Next

  In the dashboard for WP-Statistics you’ll see :

  • Overview, Hits, Online, Referrers, Search Words, Search Engines, Pages, Visitors, Categories, Tags, Authors, Browsers, Top Visitors Today
  • These are the only things you can see in the dashboard. So you can’t click into them for a drop down section to get deeper insights. 
  •  

  

  Key similarities between Matomo and WP-Statistics

  • Free to use
  • Self-hosted – All data collected is stored only within your own servers, no third parties have rights over your data, and logs or report data will never be sent to other servers. 
  • Beginner-friendly – Both offer simple reporting for people who are very much beginners and only want basic insights. With Matomo the advantage is also that you can get more details should you ever want/need to.

  Key differences between Matomo and WP-Statistics

  The main differences fall in these categories : features, privacy, documentation/support, security, active development, extensibility, price and ads.

  Features : 

  WP-Statistics – On a fundamental level, WP-Statistics is focused on simplicity and the basics. There are fewer reports than Matomo and they function on a level that suits beginners who are interested in seeing only the numbers of visitors on the website, and how often each page is viewed. 

  Matomo – provides an interface with similar simplicity. However, there is also a more feature-rich and more comprehensive user interface available. In addition to the basics, Matomo offers features like Goals, Ecommerce, in the free version which show a deeper level of insight. WP Statistics does not let you track essentials like Goals or Ecommerce.

  Privacy : 

  WP-Statistics – One of the concerns we wish to raise here is for data privacy. There doesn’t appear to be an opt-out option in WP-Statistics, which could be problematic for some privacy laws such as GDPR. There’s also no documentation on this.

  We were a bit concerned to see that WP-Statistics didn’t have IP anonymization enabled by default. Considering the IP address is personal data, it means you are not compliant with privacy laws such as the GDPR when you use this plugin unless you tweak the settings. They mentioned : “In previous versions, there was an option called Hash IP. When Hash IP was activated, the IP addresses wouldn’t be stored in the database, but instead, a unique hash would be used. In this new version, an option has been added to store IPs anonymously. This option is active by default.” However, when we installed this and tested it on multiple WordPress installations, this option was not active by default. 

  Matomo – has more measures in place to ensure privacy is respected, such as, opt-outs. Due to the stringent privacy features in place, Matomo is well equipped to ensure GDPR compliance. Matomo has an abundance of user guides and FAQs you can follow to configure your platform to fully comply with GDPR. There’s even an 12-step compliant checklist. The most compelling proof is that the leading voice on GDPR – The European Commission uses Matomo Analytics. 

  Documentation/Support : 

  WP-Statistics – has little documentation, FAQs, and no support.

  Matomo – has thousands of FAQs and user guides, as well as a dedicated support team and forum you can turn to for help. Should you ever run into any issue, this might be something important to consider.

  The contrast in support between WP-Statistics and Matomo for WordPress :

  

  

  Security :

  Matomo takes protecting your data very seriously. We have a security bounty programme giving security researchers money should they find any security issues. Matomo also performs a security review for every new release. We couldn’t find anything similar in WP-Statistics.

  Active development : 

  WP Statistics – doesn’t seem to have active development. The last change in this plugin was over three months ago (source : https://github.com/wp-statistics/wp-statistics/commits/master) and in general, only 10 people really contributed to it (source : https://github.com/wp-statistics/wp-statistics/graphs/contributors, the graphs shows little contributor activity.) 

  Matomo – has been built by hundreds of contributors (source : https://github.com/matomo-org/matomo/graphs/contributors), and is actively maintained by multiple developers including developers who work on this full time. This means you can rest assured that Matomo will be there for you in the future, it will receive regular improvements.

  Extensibility :

  WP-Statistics – have a section on their website offering customisation but for a price. 

  Matomo – should you want any changes and have some developer knowledge or some developers at hand, you can completely customise and extend Matomo for free. There are also one hundred additional plugins available for Matomo for free. 
  

  Price :

  The main WordPress plugins ‘WP Statistics‘ and ‘Matomo Analytics – Ethical Stats. Powerful Insights.‘ are both free.

  WP Statistics and Matomo also sell paid add-ons. However, WP-Statistics’ paid add-ons are ones already integrated in Matomo for free. These basic features are provided as the development team believe they’re necessities to a fully functional analytics platform. 

  Ads :

  WP Statistics shows you ads, whereas Matomo doesn’t.

  Three most notable feature category comparisons

  Both Matomo and WP-Statistics have basic tracking categories in the WP dashboard. In addition, Matomo has feature categories that can be expanded e.g. when clicked, Visitors drops down to reveal 11 more features. 

  We’ll compare three feature categories : Visitors, Behaviour, and Acquisitions.

  1. Visitors (WP-Statistics) vs Visitors (Matomo)

  Let’s dive into how each analytics platform provides insight into the visitors feature category.

  WP-Statistics

  

  WP-Statistics – We can see WP-Statistics gives you bare bones tracking capabilities so you don’t get a really detailed picture of your visitors. It allows you to monitor users currently online in real-time, which is useful to look at the most recent activity on your site. WP-Statistics doesn’t offer a dropdown section to see more about your visitor’s behavioural patterns. There is no Visitors category in WP-Statistics, just individual features in the dashboard but we can group three options together to compare with Matomo’s Visitors category, these are : Online, Browsers, Top Visitors Today.

  Matomo

  

  

  Comparison

  Matomo – In comparison, Matomo has a Visitors category with a dropdown list that lets you drill deeper into what your visitors are doing. It lets you evaluate every action an individual user has taken on your website which is compiled into a full historical profile. Matomo gives an in-depth view. E.g. you can look at individual visit logs, locations, and devices.

  This lets you see what the life-time journey of an active user looks like, or perhaps you want to see what a profile looks like for a user who comes back time-and-time again without ever purchasing ; there is no better way to gain insights to these journeys and this is why the Visitor Profiles feature is so widely used by Matomo users.

  2. Pages tracking (WP-Statistics) vs Behaviour (Matomo)

  For this comparison, WP-Statistics has a few features that can be combined to compare with Matomo’s Behaviour category. 

  WP-Statistics

  

  The Pages section in WP-Statistics gives a basic look at your most popular pages so you know which pages get more visits and those which aren’t performing. This helps with content improvement. You can also see other features in this Behaviour category like Browsers and Hits – these also provide basic stats to help you get a general sense of visitor behaviour. 

  Matomo

  

  Comparison :

  Matomo on the other hand has stats that go into greater detail. The features under the Behaviour section of the tool let you draw actionable conclusions e.g. seeing that a page has a higher exit rate than it’s supposed to, so you optimise that page to prevent people leaving and help them progress through your website. 

  Not only can you see popular pages, you can look at : which page people viewed first when they visited your website ; which page they left from ; what people search for on your site ; and see how people are flowing through pages. Most importantly you can see how each of these reports perform over time so you can improve engagement and conversions on your website.

  3. Referrers (WP-Statistics) vs Acquisition (Matomo)

  For this comparison, WP-Statistics has a few features that can be combined to compare with Matomo’s Acquisition category. 

  WP-Statistics

  

  WP-Statistics gives you Referrers, Search Words, and Search Engines. Which give a basic understanding of the channels that work best for you. This is helpful to know where to focus more of your attention.

  Matomo

  

  Comparison :

  With Matomo you see multiple layers of stats to understand how your acquisition channels are performing. So you can see tables of data that drill into visits, downloads, bounce rate, and newsletter sign ups. For example seeing that Facebook is the channel bringing in the most visitors to your site. This gives you a better sense of which acquisition strategy is working for your site. 

  Who suits WP-Statistics

  This is a great starter pack for people who want a lightweight, functional statistics plugin that gives you a basic overview of website hits and visitors. It’s very easy to use, so it’s great for beginners and those who want simple tracking. If you have basic goals for your website or blog’s success then WP-Statistics is enough for you to get numbers on visitors, page views, and hits, but won’t be suitable for a larger-scale business or organisation. 

  It’s suited for hobby websites, blogs, and freelancers who want simple, effective stats tracking, who don’t need detailed insights on site performance or tracking. 

  Who suits Matomo

  Matomo can be used for the same basic reporting, but has the capability for you to go deeper into more advanced reporting in a different UI if you need it. It’s an option that can work for a wider range of users – from beginners to analysts. There are features to suit all skill levels. This complete suite of features makes it a more comprehensive tool, as you can get more out of it. Ideal not only for bloggers and beginners, but also powerful enough to suit businesses, privacy-respecting organisations, and those who would benefit from conversion optimisation features. 

  You can draw insights from all stages of the customer journey – you’ll track behavioural patterns as soon as visitors enter your site, to their progression through your site, and ultimately to conversion and exit. It’s also an ethical choice because you get 100% data ownership. 

  If you’d like to look deeper into your data then Matomo would also be suitable for you. Matomo’s UI is lean, very easy to learn and shouldn’t overwhelm users in the way another tool like Google Analytics might do. If you think Matomo suits you best, you can install it for free now.

  Advantages of using Matomo

  Truly privacy-respecting

  There’s no messing about when it comes to privacy. As a lot of users are based in Europe, Matomo adheres to the strictest privacy laws and can be counted on as a privacy-respecting tool that’s used by many government entities. Needing to comply with major privacy laws (GDPR) in Europe means Matomo can proudly ensure users are making the ethical choice.

  GDPR compliance

  You mitigate the risks of getting caught out and fined for breaching GDPR regulations. There’s a complete list of documentation, guides, information, and tools to make sure you’re on the right side of GDPR. 

  All-rounder

  Matomo gives you a clearer picture of your visitors which helps you make better decisions for your website overall. The support and documentation is thorough which means you get more out of your Matomo experience.

  Conclusion

  Both tools will do you justice in terms of fundamental reporting, but Matomo Analytics will outshine if you want a greater understanding of your website and want to carry out deeper levels of analysis.

  You can draw useful insights with WP-Statistics so it has to be said that they are doing something right with an entry-level offering. The simplicity is great, but you won’t really get more than a basic idea of how your site is performing.

  On the flipside, this simplicity could also be a double-edged sword for WP-Statistics in that it’s too simplistic to draw actionable insights. If you’re wanting to know anything that could increase sales, conversions or subscribers – then you wouldn’t really get the reports to do so. 

  WP-Statistics also falls short when it comes to updates and support. So a major difference can be seen in support, active development, ads, security, documentation, which many people may think about until they’re in trouble and find they need these resources. Matomo offers support, continuous product development, and extensive documentation. There are also no ads, making it more enjoyable to use.

  One thing we’d like to raise awareness about is WP-Statistics’ claims of being privacy-respecting without much documentation to back up those claims. There is a lack of privacy features which could put some website owners at risk of non-compliance. Just be sure to check that you’ve carried out the steps to comply with the privacy laws in your country.

  Matomo makes it clear that privacy is essential as is compliance to privacy laws like GDPR. The strength also lies in the peace of mind you get from a tool that’s used by global privacy leaders such as the European Commission. 

• Generating video from images and audio by FFmpeg

  24 mars 2020, par Cody

  I am new to FFmpeg and video/audio encoding. I try to use Fluent ffmpeg to generate a MP4 video from images and audio.

  There are 2 inputs only :

  • JPG images with filename NOT in numbering sequence (e.g. foo.jpg, bar.jpg)
  • .wav audio

  If the audio duration is longer video length, just discard the excessive part of audio at the end.
  And all the images have to be shown in same duration.(i.e. The video should be in n/d FPS for n images and video with d second)

  Since the image input are not in number sequence, I use concat demuxer as input :

          let VIDEO_DURATION = 8;
  
          let ffmpeg = await FfmpegUtil.createCommand();
  
          let imageFiles: string[] = ["foo.jpg", "bar.jpg", ...]; //assume there are 67 image files
  
          let demuxerFile = await FfmpegUtil.createConcatDemuxerFile(imageFiles);
  
          let audioFile: string = "path/to/audio.wav";
  
  
  
          ffmpeg.input(demuxerFile)
  
              .inputOption(
  
                  "-f", "concat",
  
                  "-safe", "0",
  
              )
  
              .input(audioFile)
  
              .outputOption(
  
                  "-r", `${imageFiles.length}/${VIDEO_DURATION}`,
  
              )
  
              .duration(VIDEO_DURATION)
  
              .save("path/to/output.mp4")
  
          ;

  it will spawn a ffmpeg command :

  ffmpeg 
  
      -f concat 
  
      -safe 0 
  
      -i path/to/demuxerFile.txt 
  
      -i path/to/audio.wav 
  
      -y 
  
      -r 67/8
  
      -t 8 
  
      path/to/output.mp4

  However the output file cannot be played.

  I also tried "-framerate", ${imageFiles.length}/${VIDEO_DURATION} in .outputOption(), it still output a file cannot be played and I found the frame rate always be 25 in its file property.

  Update 1 (added spawned command & ffmpeg console log) :

  spawned ffmpeg command & console log ("-r", `${imageFiles.length}/${VIDEO_DURATION}` as outputOption) :

  ffmpeg -f concat -safe 0 -i path/to/demuxerFile.txt -i path/to/audio.wav -y -r 67/8 -t 8 path/to/output_r.mp4
  
  
  
  ffmpeg version git-2020-01-26-5e62100 Copyright (c) 2000-2020 the FFmpeg developers
  
    built with gcc 9.2.1 (GCC) 20200122
  
    configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt --enable-amf
  
    libavutil      56. 38.100 / 56. 38.100
  
    libavcodec     58. 67.100 / 58. 67.100
  
    libavformat    58. 36.100 / 58. 36.100
  
    libavdevice    58.  9.103 / 58.  9.103
  
    libavfilter     7. 71.100 /  7. 71.100
  
    libswscale      5.  6.100 /  5.  6.100
  
    libswresample   3.  6.100 /  3.  6.100
  
    libpostproc    55.  6.100 / 55.  6.100
  
  Input #0, concat, from 'path/to/demuxerFile.txt':
  
    Duration: N/A, start: 0.000000, bitrate: N/A
  
      Stream #0:0: Video: mjpeg (Baseline), yuvj444p(pc, bt470bg/unknown/unknown), 4677x4677 [SAR 256:256 DAR 1:1], 25 tbr, 25 tbn, 25 tbc
  
  Guessed Channel Layout for Input Stream #1.0 : stereo
  
  Input #1, wav, from 'path/to/audio.wav':
  
    Metadata:
  
      artist          : TextAloud: IVONA Kimberly22
  
      date            : 2018
  
      genre           : Speech
  
      title           : 38750336.mp3
  
      album           : Created: 7/26/2018 4:56:13 PM
  
      encoder         : Lavf58.16.100
  
      encoded_by      : Lame MP3
  
    Duration: 00:00:15.57, bitrate: 705 kb/s
  
      Stream #1:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 22050 Hz, stereo, s16, 705 kb/s
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
    Stream #1:0 -> #0:1 (pcm_s16le (native) -> aac (native))
  
  Press [q] to stop, [?] for help
  
  [libx264 @ 000001e395041400] using SAR=1/1
  
  [libx264 @ 000001e395041400] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  [libx264 @ 000001e395041400] profile High 4:4:4 Predictive, level 6.0, 4:4:4, 8-bit
  
  [libx264 @ 000001e395041400] 264 - core 159 - H.264/MPEG-4 AVC codec - Copyleft 2003-2019 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=8 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'path/to/output_r.mp4':
  
    Metadata:
  
      encoder         : Lavf58.36.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuvj444p(pc, progressive), 4677x4677 [SAR 256:256 DAR 1:1], q=-1--1, 8.38 fps, 17152 tbn, 8.38 tbc
  
      Metadata:
  
        encoder         : Lavc58.67.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
  
      Stream #0:1: Audio: aac (LC) (mp4a / 0x6134706D), 22050 Hz, stereo, fltp, 128 kb/s
  
      Metadata:
  
        encoder         : Lavc58.67.100 aac
  
  frame=    3 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=    5 fps=4.2 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=4 speed=   0x    
  
  frame=    6 fps=3.4 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=7 speed=   0x    
  
  frame=    8 fps=3.4 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=10 speed=   0x    
  
  frame=   10 fps=3.5 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=14 speed=   0x    
  
  frame=   11 fps=3.2 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=16 speed=   0x    
  
  frame=   13 fps=3.2 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=20 speed=   0x    
  
  frame=   14 fps=3.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=22 speed=   0x    
  
  frame=   16 fps=3.1 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=26 speed=   0x    
  
  frame=   17 fps=2.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=28 speed=   0x    
  
  frame=   18 fps=2.8 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=31 speed=   0x    
  
  frame=   20 fps=2.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=34 speed=   0x    
  
  frame=   21 fps=2.8 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=36 speed=   0x    
  
  frame=   23 fps=2.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=40 speed=   0x    
  
  frame=   24 fps=2.8 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A dup=0 drop=42 speed=   0x    
  
  frame=   24 fps=0.7 q=-1.0 Lsize=     752kB time=00:00:08.03 bitrate= 766.4kbits/s dup=0 drop=43 speed=0.22x    
  
  video:624kB audio:125kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.359236%
  
  [libx264 @ 000001e395041400] frame I:1     Avg QP:12.79  size:257554
  
  [libx264 @ 000001e395041400] frame P:15    Avg QP:13.10  size: 20487
  
  [libx264 @ 000001e395041400] frame B:8     Avg QP:13.10  size:  9231
  
  [libx264 @ 000001e395041400] consecutive B-frames: 45.8% 25.0% 12.5% 16.7%
  
  [libx264 @ 000001e395041400] mb I  I16..4: 18.4% 79.2%  2.4%
  
  [libx264 @ 000001e395041400] mb P  I16..4:  1.0%  3.3%  0.4%  P16..4:  1.0%  0.2%  0.2%  0.0%  0.0%    skip:93.9%
  
  [libx264 @ 000001e395041400] mb B  I16..4:  0.1%  0.2%  0.1%  B16..8:  1.8%  0.1%  0.0%  direct: 2.9%  skip:94.7%  L0:58.1% L1:40.2% BI: 1.7%
  
  [libx264 @ 000001e395041400] 8x8 transform intra:75.0% inter:82.7%
  
  [libx264 @ 000001e395041400] coded y,u,v intra: 6.1% 3.5% 4.4% inter: 0.2% 1.2% 0.5%
  
  [libx264 @ 000001e395041400] i16 v,h,dc,p: 80% 16%  3%  2%
  
  [libx264 @ 000001e395041400] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 46%  8% 44%  0%  0%  0%  0%  0%  0%
  
  [libx264 @ 000001e395041400] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 29% 27% 25%  3%  3%  3%  4%  3%  3%
  
  [libx264 @ 000001e395041400] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 000001e395041400] ref P L0: 75.6%  3.3% 14.8%  6.3%
  
  [libx264 @ 000001e395041400] ref B L0: 88.6% 10.7%  0.7%
  
  [libx264 @ 000001e395041400] ref B L1: 98.7%  1.3%
  
  [libx264 @ 000001e395041400] kb/s:1783.06
  
  [aac @ 000001e3951e7f80] Qavg: 55135.730

  spawned ffmpeg command & console log ("-framerate", `${imageFiles.length}/${VIDEO_DURATION}` as outputOption) :

  ffmpeg -f concat -safe 0 -i path/to/demuxerFile.txt -i path/to/audio.wav -y -framerate 67/8 -t 8 path/to/output_framerate.mp4
  
  
  
  ffmpeg version git-2020-01-26-5e62100 Copyright (c) 2000-2020 the FFmpeg developers
  
    built with gcc 9.2.1 (GCC) 20200122
  
    configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt --enable-amf
  
    libavutil      56. 38.100 / 56. 38.100
  
    libavcodec     58. 67.100 / 58. 67.100
  
    libavformat    58. 36.100 / 58. 36.100
  
    libavdevice    58.  9.103 / 58.  9.103
  
    libavfilter     7. 71.100 /  7. 71.100
  
    libswscale      5.  6.100 /  5.  6.100
  
    libswresample   3.  6.100 /  3.  6.100
  
    libpostproc    55.  6.100 / 55.  6.100
  
  Input #0, concat, from 'path/to/demuxerFile.txt':
  
    Duration: N/A, start: 0.000000, bitrate: N/A
  
      Stream #0:0: Video: mjpeg (Baseline), yuvj444p(pc, bt470bg/unknown/unknown), 4677x4677 [SAR 256:256 DAR 1:1], 25 tbr, 25 tbn, 25 tbc
  
  Guessed Channel Layout for Input Stream #1.0 : stereo
  
  Input #1, wav, from 'path/to/audio.wav':
  
    Metadata:
  
      artist          : TextAloud: IVONA Kimberly22
  
      date            : 2018
  
      genre           : Speech
  
      title           : 38750336.mp3
  
      album           : Created: 7/26/2018 4:56:13 PM
  
      encoder         : Lavf58.16.100
  
      encoded_by      : Lame MP3
  
    Duration: 00:00:15.57, bitrate: 705 kb/s
  
      Stream #1:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 22050 Hz, stereo, s16, 705 kb/s
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (mjpeg (native) -> h264 (libx264))
  
    Stream #1:0 -> #0:1 (pcm_s16le (native) -> aac (native))
  
  Press [q] to stop, [?] for help
  
  [libx264 @ 000002460bda4740] using SAR=1/1
  
  [libx264 @ 000002460bda4740] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  [libx264 @ 000002460bda4740] profile High 4:4:4 Predictive, level 6.0, 4:4:4, 8-bit
  
  [libx264 @ 000002460bda4740] 264 - core 159 - H.264/MPEG-4 AVC codec - Copyleft 2003-2019 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, mp4, to 'path/to/output_framerate.mp4':
  
    Metadata:
  
      encoder         : Lavf58.36.100
  
      Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuvj444p(pc, progressive), 4677x4677 [SAR 256:256 DAR 1:1], q=-1--1, 25 fps, 12800 tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc58.67.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
  
      Stream #0:1: Audio: aac (LC) (mp4a / 0x6134706D), 22050 Hz, stereo, fltp, 128 kb/s
  
      Metadata:
  
        encoder         : Lavc58.67.100 aac
  
  frame=    3 fps=0.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=    6 fps=5.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=    9 fps=5.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   12 fps=5.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   14 fps=4.6 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   16 fps=4.4 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   18 fps=3.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   20 fps=3.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   22 fps=3.8 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   23 fps=3.6 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   25 fps=3.6 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   27 fps=3.3 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   28 fps=3.1 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   30 fps=3.1 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   33 fps=3.2 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   36 fps=3.3 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   38 fps=3.1 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   39 fps=3.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   40 fps=2.6 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   41 fps=2.4 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   42 fps=2.0 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   43 fps=1.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   44 fps=1.9 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   45 fps=1.8 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   46 fps=1.8 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   47 fps=1.4 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   49 fps=1.5 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   50 fps=1.5 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   51 fps=1.5 q=28.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   51 fps=1.3 q=28.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x    
  
  frame=   52 fps=1.3 q=28.0 size=       0kB time=00:00:00.04 bitrate=   8.3kbits/s speed=0.00114x    
  
  frame=   53 fps=1.3 q=28.0 size=       0kB time=00:00:00.04 bitrate=   8.3kbits/s speed=0.00111x    
  
  frame=   54 fps=1.2 q=28.0 size=       0kB time=00:00:00.04 bitrate=   8.3kbits/s speed=0.00101x    
  
  frame=   55 fps=1.2 q=28.0 size=       0kB time=00:00:00.13 bitrate=   2.8kbits/s speed=0.00297x    
  
  frame=   56 fps=1.1 q=28.0 size=       0kB time=00:00:00.18 bitrate=   2.1kbits/s speed=0.00377x    
  
  frame=   57 fps=1.1 q=28.0 size=     256kB time=00:00:00.23 bitrate=9033.3kbits/s speed=0.00461x    
  
  frame=   58 fps=1.1 q=28.0 size=     256kB time=00:00:00.27 bitrate=7527.8kbits/s speed=0.00514x    
  
  frame=   59 fps=1.0 q=28.0 size=     256kB time=00:00:00.32 bitrate=6452.4kbits/s speed=0.00571x    
  
  frame=   60 fps=1.0 q=28.0 size=     256kB time=00:00:00.37 bitrate=5645.8kbits/s speed=0.00643x    
  
  frame=   62 fps=1.0 q=28.0 size=     256kB time=00:00:00.37 bitrate=5645.8kbits/s speed=0.00605x    
  
  frame=   62 fps=1.0 q=28.0 size=     256kB time=00:00:00.41 bitrate=5018.5kbits/s speed=0.00668x    
  
  frame=   63 fps=1.0 q=28.0 size=     256kB time=00:00:00.46 bitrate=4516.7kbits/s speed=0.00727x    
  
  frame=   64 fps=1.0 q=28.0 size=     256kB time=00:00:00.51 bitrate=4106.1kbits/s speed=0.00778x    
  
  frame=   65 fps=1.0 q=28.0 size=     256kB time=00:00:00.55 bitrate=3763.9kbits/s speed=0.00827x    
  
  frame=   66 fps=1.0 q=28.0 size=     256kB time=00:00:00.60 bitrate=3474.4kbits/s speed=0.00884x    
  
  frame=   67 fps=1.0 q=28.0 size=     256kB time=00:00:00.65 bitrate=3226.2kbits/s speed=0.00943x    
  
  frame=   67 fps=0.6 q=-1.0 Lsize=     872kB time=00:00:08.03 bitrate= 888.9kbits/s speed=0.0752x    
  
  video:744kB audio:125kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.391708%
  
  [libx264 @ 000002460bda4740] frame I:1     Avg QP:15.80  size:216204
  
  [libx264 @ 000002460bda4740] frame P:29    Avg QP:15.19  size: 10747
  
  [libx264 @ 000002460bda4740] frame B:37    Avg QP:17.07  size:  6300
  
  [libx264 @ 000002460bda4740] consecutive B-frames: 17.9% 14.9% 31.3% 35.8%
  
  [libx264 @ 000002460bda4740] mb I  I16..4: 11.4% 86.0%  2.6%
  
  [libx264 @ 000002460bda4740] mb P  I16..4:  0.5%  1.9%  0.2%  P16..4:  0.7%  0.2%  0.1%  0.0%  0.0%    skip:96.5%
  
  [libx264 @ 000002460bda4740] mb B  I16..4:  0.1%  0.2%  0.0%  B16..8:  1.3%  0.2%  0.0%  direct: 0.7%  skip:97.5%  L0:57.4% L1:40.7% BI: 1.9%
  
  [libx264 @ 000002460bda4740] 8x8 transform intra:79.7% inter:31.4%
  
  [libx264 @ 000002460bda4740] coded y,u,v intra: 5.7% 2.9% 3.7% inter: 0.1% 0.5% 0.2%
  
  [libx264 @ 000002460bda4740] i16 v,h,dc,p: 70% 23%  4%  2%
  
  [libx264 @ 000002460bda4740] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 45%  8% 45%  0%  0%  0%  0%  0%  0%
  
  [libx264 @ 000002460bda4740] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 29% 26% 25%  3%  3%  4%  4%  3%  2%
  
  [libx264 @ 000002460bda4740] Weighted P-Frames: Y:0.0% UV:0.0%
  
  [libx264 @ 000002460bda4740] ref P L0: 72.6%  3.0% 16.6%  7.7%
  
  [libx264 @ 000002460bda4740] ref B L0: 75.7% 20.6%  3.7%
  
  [libx264 @ 000002460bda4740] ref B L1: 97.7%  2.3%
  
  [libx264 @ 000002460bda4740] kb/s:2271.59
  
  [aac @ 000002460bda8580] Qavg: 55135.730