Recherche avancée
Autres articles (62)
-
Les formats acceptés
28 janvier 2010, parLes commandes suivantes permettent d’avoir des informations sur les formats et codecs gérés par l’installation local de ffmpeg :
ffmpeg -codecs ffmpeg -formats
Les format videos acceptés en entrée
Cette liste est non exhaustive, elle met en exergue les principaux formats utilisés : h264 : H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 m4v : raw MPEG-4 video format flv : Flash Video (FLV) / Sorenson Spark / Sorenson H.263 Theora wmv :
Les formats vidéos de sortie possibles
Dans un premier temps on (...) -
Ajouter notes et légendes aux images
7 février 2011, parPour pouvoir ajouter notes et légendes aux images, la première étape est d’installer le plugin "Légendes".
Une fois le plugin activé, vous pouvez le configurer dans l’espace de configuration afin de modifier les droits de création / modification et de suppression des notes. Par défaut seuls les administrateurs du site peuvent ajouter des notes aux images.
Modification lors de l’ajout d’un média
Lors de l’ajout d’un média de type "image" un nouveau bouton apparait au dessus de la prévisualisation (...) -
Demande de création d’un canal
12 mars 2010, parEn fonction de la configuration de la plateforme, l’utilisateur peu avoir à sa disposition deux méthodes différentes de demande de création de canal. La première est au moment de son inscription, la seconde, après son inscription en remplissant un formulaire de demande.
Les deux manières demandent les mêmes choses fonctionnent à peu près de la même manière, le futur utilisateur doit remplir une série de champ de formulaire permettant tout d’abord aux administrateurs d’avoir des informations quant à (...)
Sur d’autres sites (9742)
-
Issue in dealing with MediaCodec end of stream
21 novembre 2015, par 123rgtI’m using MediaCodec to decode frames from the packets got from ffmpeg. When end of the stream is reached I signal the codec with NULL packet with BUFFER_FLAG_END_OF_STREAM set. But the output ends immediately without rendering all the frames, for avc codecs. Here is my code for input and output...
public int HwDecoderInputCallback( int size, long pts, int flag ){
int ret = 0, flags = 0;
final int TIME_OUT_US = 10000;
int inputBufIndex = 0;
try{
try{
Thread.sleep(5);
}catch(InterruptedException e){
}
inputBufIndex = chd.decoder.dequeueInputBuffer(TIME_OUT_US);
if( inputBufIndex >= 0 ){
ByteBuffer inputBuf = inputBuffer[inputBufIndex];
inputBuf.clear();
getVideoPacketHW(inputBuf, size);
chd.decoder.queueInputBuffer( inputBufIndex, 0, size, pts, flag);
}
}catch(Exception e1){
// Irrecoverable errors. Release Media codec and recreate resources.
videoWindow.glRenderer.restoreVideoSurface();
ret = -1;
}
return ret;
}
public int HwDecoderOutputCallBack(){
int status = 0;
final int TIME_OUT_US = 10000;
try{
int dec_status = chd.decoder.dequeueOutputBuffer(mBufferInfo, TIME_OUT_US);
if( dec_status == MediaCodec.INFO_TRY_AGAIN_LATER ){
Log.i("Candy MediaPlayer","Output try again");
}else if( dec_status == MediaCodec.INFO_OUTPUT_BUFFERS_CHANGED){
Log.i("Candy MediaPlayer","Output buffer changed");
outputBuffer = chd.decoder.getOutputBuffers();
}else if( dec_status == MediaCodec.INFO_OUTPUT_FORMAT_CHANGED){
Log.i("Candy MediaPlayer","Buffer fmt changed");
}else if( dec_status < 0){
Log.i("Candy MediaPlayer","Output buffer index < 0");
}else{
if(((mBufferInfo.flags & MediaCodec.BUFFER_FLAG_END_OF_STREAM)!=0)){
Log.i("Candy MediaPlayer","End of stream.");
chd.decoder.releaseOutputBuffer(dec_status, false);
status = 1;
}else{
candySyncVideoHW( mBufferInfo.presentationTimeUs );
chd.decoder.releaseOutputBuffer(dec_status, true);
status = 0;
}
}
}
catch( Exception e){
// Irrecoverable errors. Release Media codec and recreate resources.
videoWindow.glRenderer.restoreVideoSurface();
}
return status;
}What is wrong with this code... I’m calling these fn:s from an infinite loop, it works fine until I give an empty packet of size zero with BUFFER_FLAG_END_OF_STREAM set. After this it stops immediately without rendering all the packets.
-
Can not add tmcd stream using libavcodec to replicate behavior of ffmpeg -timecode option
2 août, par Sailor JerryI'm trying to replicate option of command line ffmpeg -timecode in my C/C++ code. For some reasons the tcmd stream is not written to the output file. However the av_dump_format shows it in run time


Here is my minimal test


#include <iostream>
extern "C" {
#include <libavcodec></libavcodec>avcodec.h>
#include <libavformat></libavformat>avformat.h>
#include <libavutil></libavutil>avutil.h>
#include <libswscale></libswscale>swscale.h>
#include <libavutil></libavutil>opt.h>
#include <libavutil></libavutil>imgutils.h>
#include <libavutil></libavutil>samplefmt.h>
}
bool checkProResAvailability() {
 const AVCodec* codec = avcodec_find_encoder_by_name("prores_ks");
 if (!codec) {
 std::cerr << "ProRes codec not available. Please install FFmpeg with ProRes support." << std::endl;
 return false;
 }
 return true;
}

int main(){
 av_log_set_level(AV_LOG_INFO);

 const char* outputFileName = "test_tmcd.mov";
 AVFormatContext* formatContext = nullptr;
 AVCodecContext* videoCodecContext = nullptr;

 if (!checkProResAvailability()) {
 return -1;
 }

 std::cout << "Creating test file with tmcd stream: " << outputFileName << std::endl;

 // Allocate the output format context
 if (avformat_alloc_output_context2(&formatContext, nullptr, "mov", outputFileName) < 0) {
 std::cerr << "Failed to allocate output context!" << std::endl;
 return -1;
 }

 if (avio_open(&formatContext->pb, outputFileName, AVIO_FLAG_WRITE) < 0) {
 std::cerr << "Failed to open output file!" << std::endl;
 avformat_free_context(formatContext);
 return -1;
 }

 // Find ProRes encoder
 const AVCodec* videoCodec = avcodec_find_encoder_by_name("prores_ks");
 if (!videoCodec) {
 std::cerr << "Failed to find the ProRes encoder!" << std::endl;
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 // Video stream setup
 AVStream* videoStream = avformat_new_stream(formatContext, nullptr);
 if (!videoStream) {
 std::cerr << "Failed to create video stream!" << std::endl;
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 videoCodecContext = avcodec_alloc_context3(videoCodec);
 if (!videoCodecContext) {
 std::cerr << "Failed to allocate video codec context!" << std::endl;
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 videoCodecContext->width = 1920;
 videoCodecContext->height = 1080;
 videoCodecContext->pix_fmt = AV_PIX_FMT_YUV422P10;
 videoCodecContext->time_base = (AVRational){1, 30}; // Set FPS: 30
 videoCodecContext->bit_rate = 2000000;

 if (avcodec_open2(videoCodecContext, videoCodec, nullptr) < 0) {
 std::cerr << "Failed to open ProRes codec!" << std::endl;
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 if (avcodec_parameters_from_context(videoStream->codecpar, videoCodecContext) < 0) {
 std::cerr << "Failed to copy codec parameters to video stream!" << std::endl;
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 videoStream->time_base = videoCodecContext->time_base;

 // Timecode stream setup
 AVStream* timecodeStream = avformat_new_stream(formatContext, nullptr);
 if (!timecodeStream) {
 std::cerr << "Failed to create timecode stream!" << std::endl;
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 timecodeStream->codecpar->codec_type = AVMEDIA_TYPE_DATA;
 timecodeStream->codecpar->codec_id = AV_CODEC_ID_TIMED_ID3;
 timecodeStream->codecpar->codec_tag = MKTAG('t', 'm', 'c', 'd'); // Timecode tag
 timecodeStream->time_base = (AVRational){1, 30}; // FPS: 30

 if (av_dict_set(&timecodeStream->metadata, "timecode", "00:00:30:00", 0) < 0) {
 std::cerr << "Failed to set timecode metadata!" << std::endl;
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 // Write container header
 if (avformat_write_header(formatContext, nullptr) < 0) {
 std::cerr << "Failed to write file header!" << std::endl;
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 // Encode a dummy video frame
 AVFrame* frame = av_frame_alloc();
 if (!frame) {
 std::cerr << "Failed to allocate video frame!" << std::endl;
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 frame->format = videoCodecContext->pix_fmt;
 frame->width = videoCodecContext->width;
 frame->height = videoCodecContext->height;

 if (av_image_alloc(frame->data, frame->linesize, frame->width, frame->height, videoCodecContext->pix_fmt, 32) < 0) {
 std::cerr << "Failed to allocate frame buffer!" << std::endl;
 av_frame_free(&frame);
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);
 return -1;
 }

 // Fill frame with black
 memset(frame->data[0], 0, frame->linesize[0] * frame->height); // Y plane
 memset(frame->data[1], 128, frame->linesize[1] * frame->height / 2); // U plane
 memset(frame->data[2], 128, frame->linesize[2] * frame->height / 2); // V plane

 // Encode the frame
 AVPacket packet;
 av_init_packet(&packet);
 packet.data = nullptr;
 packet.size = 0;

 if (avcodec_send_frame(videoCodecContext, frame) == 0) {
 if (avcodec_receive_packet(videoCodecContext, &packet) == 0) {
 packet.stream_index = videoStream->index;
 av_interleaved_write_frame(formatContext, &packet);
 av_packet_unref(&packet);
 }
 }

 av_frame_free(&frame);

 // Write a dummy packet for the timecode stream
 AVPacket tmcdPacket;
 av_init_packet(&tmcdPacket);
 tmcdPacket.stream_index = timecodeStream->index;
 tmcdPacket.flags |= AV_PKT_FLAG_KEY;
 tmcdPacket.data = nullptr; // Empty packet for timecode
 tmcdPacket.size = 0;
 tmcdPacket.pts = 0; // Set necessary PTS
 tmcdPacket.dts = 0;
 av_interleaved_write_frame(formatContext, &tmcdPacket);

 // Write trailer
 if (av_write_trailer(formatContext) < 0) {
 std::cerr << "Failed to write file trailer!" << std::endl;
 }

 av_dump_format(formatContext, 0, "test.mov", 1);

 // Cleanup
 avcodec_free_context(&videoCodecContext);
 avio_close(formatContext->pb);
 avformat_free_context(formatContext);

 std::cout << "Test file with timecode created successfully: " << outputFileName << std::endl;

 return 0;
}
</iostream>

The code output is :


Creating test file with tmcd stream: test_tmcd.mov
[prores_ks @ 0x11ce05790] Autoselected HQ profile to keep best quality. It can be overridden through -profile option.
[mov @ 0x11ce04f20] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
[mov @ 0x11ce04f20] Encoder did not produce proper pts, making some up.
Output #0, mov, to 'test.mov':
 Metadata:
 encoder : Lavf61.7.100
 Stream #0:0: Video: prores (HQ) (apch / 0x68637061), yuv422p10le, 1920x1080, q=2-31, 2000 kb/s, 15360 tbn
 Stream #0:1: Data: timed_id3 (tmcd / 0x64636D74)
 Metadata:
 timecode : 00:00:30:00
Test file with timecode created successfully: test_tmcd.mov


The ffprobe output is :


$ ffprobe test_tmcd.mov
ffprobe version 7.1.1 Copyright (c) 2007-2025 the FFmpeg developers
 built with Apple clang version 16.0.0 (clang-1600.0.26.6)
 configuration: --prefix=/opt/homebrew/Cellar/ffmpeg/7.1.1_3 --enable-shared --enable-pthreads --enable-version3 --cc=clang --host-cflags= --host-ldflags='-Wl,-ld_classic' --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libaribb24 --enable-libbluray --enable-libdav1d --enable-libharfbuzz --enable-libjxl --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librist --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvmaf --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-libsoxr --enable-libzmq --enable-libzimg --disable-libjack --disable-indev=jack --enable-videotoolbox --enable-audiotoolbox --enable-neon
 libavutil 59. 39.100 / 59. 39.100
 libavcodec 61. 19.101 / 61. 19.101
 libavformat 61. 7.100 / 61. 7.100
 libavdevice 61. 3.100 / 61. 3.100
 libavfilter 10. 4.100 / 10. 4.100
 libswscale 8. 3.100 / 8. 3.100
 libswresample 5. 3.100 / 5. 3.100
 libpostproc 58. 3.100 / 58. 3.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'test_tmcd.mov':
 Metadata:
 major_brand : qt 
 minor_version : 512
 compatible_brands: qt 
 encoder : Lavf61.7.100
 Duration: N/A, start: 0.000000, bitrate: N/A
 Stream #0:0[0x1]: Video: prores (HQ) (apch / 0x68637061), yuv422p10le, 1920x1080, 15360 tbn (default)
 Metadata:
 handler_name : VideoHandler
 vendor_id : FFMP
$ 



Spent hours with all AI models, no help. Appeal to the human intelligence now


-
avcodec/exr : Dont access outside xsize/ysize
6 août, par Michael Niedermayer
Syndiquer tout le site
