Recherche avancée

Sur d’autres sites (8916)

• How to record the bluetooth audio from my phone in my pc using ffmpeg ?

  12 septembre 2023, par Juan Inzunza

  I have my phone connected via Bluetooth to my PC and playing audio in my phone so i can hear that audio in my pc and i was trying to record that audio in my PC using ffmpeg this is the command i got so far

  


  ffmpeg -f pulse -ac 1 -ar 44100 -i alsa_input.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.mono-fallback -f pulse -ac 2 -ar 44100 -i bluez_source.84_5F_04_75_B9_F6.a2dp_source -filter_complex amix=inputs=2 -i /dev/video5 -s 640x480 -vcodec libx264 -preset veryfast -crf 18 -acodec libmp3lame -ar 44100 -q:a 1 -pix_fmt yuv420p -aq 0 ~/Videos


  


  "bluez_source.84_5F_04_75_B9_F6.a2dp_source" is the name of the bluetooth audio source (my phone) but the problem is, if i am not playing audio on the device, just disappears when i execute this command "pactl list sources", and appears again when i play audio, so is listed when i run "pactl list sources" and i have to keep the phone playing audio so ffmpeg recognizes that device and not fail when executed.

  


  Finally my question is how can i keep that device in running state or suspended state without need to play audio all the time.

  


  gandalf@Mordor:~$ pactl list sources
Source #64
    State: IDLE
    Name: alsa_output.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.analog-stereo.monitor
    Description: Monitor of KT USB Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 85
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: alsa_output.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.analog-stereo
    Latency: 0 usec, configured 2000000 usec
    Flags: DECIBEL_VOLUME LATENCY 
    Properties:
        device.description = "Monitor of KT USB Audio Analog Stereo"
        device.class = "monitor"
        alsa.card = "1"
        alsa.card_name = "KT USB Audio"
        alsa.long_card_name = "KTMicro KT USB Audio at usb-0000:03:00.3-3, full speed"
        alsa.driver_name = "snd_usb_audio"
        device.bus_path = "pci-0000:03:00.3-usb-0:3:1.0"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/sound/card1"
        udev.id = "usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00"
        device.bus = "usb"
        device.vendor.id = "12d1"
        device.vendor.name = "Huawei Technologies Co., Ltd."
        device.product.id = "0010"
        device.product.name = "KT USB Audio"
        device.serial = "KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000-"
        device.string = "1"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-usb"
    Formats:
        pcm

Source #65
    State: SUSPENDED
    Name: alsa_input.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.mono-fallback
    Description: KT USB Audio Mono
    Driver: module-alsa-card.c
    Sample Specification: s16le 1ch 44100Hz
    Channel Map: mono
    Owner Module: 85
    Mute: no
    Volume: mono: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: n/a
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
    Properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "USB Audio"
        alsa.id = "USB Audio"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "1"
        alsa.card_name = "KT USB Audio"
        alsa.long_card_name = "KTMicro KT USB Audio at usb-0000:03:00.3-3, full speed"
        alsa.driver_name = "snd_usb_audio"
        device.bus_path = "pci-0000:03:00.3-usb-0:3:1.0"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/sound/card1"
        udev.id = "usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00"
        device.bus = "usb"
        device.vendor.id = "12d1"
        device.vendor.name = "Huawei Technologies Co., Ltd."
        device.product.id = "0010"
        device.product.name = "KT USB Audio"
        device.serial = "KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000-"
        device.string = "hw:1"
        device.buffering.buffer_size = "176400"
        device.buffering.fragment_size = "88200"
        device.access_mode = "mmap+timer"
        device.profile.name = "mono-fallback"
        device.profile.description = "Mono"
        device.description = "KT USB Audio Mono"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-usb"
    Ports:
        analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
    Active Port: analog-input-mic
    Formats:
        pcm

Source #68
    State: RUNNING
    Name: bluez_source.84_5F_04_75_B9_F6.a2dp_source
    Description: Juan's S20 FE
    Driver: module-bluez5-device.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 23
    Mute: no
    Volume: front-left: 53151 /  81% / -5.46 dB,   front-right: 53151 /  81% / -5.46 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor of Sink: n/a
    Latency: 68928 usec, configured 68537 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY 
    Properties:
        bluetooth.protocol = "a2dp_source"
        bluetooth.codec = "sbc"
        device.description = "Juan's S20 FE"
        device.string = "84:5F:04:75:B9:F6"
        device.api = "bluez"
        device.class = "sound"
        device.bus = "bluetooth"
        device.form_factor = "phone"
        bluez.path = "/org/bluez/hci0/dev_84_5F_04_75_B9_F6"
        bluez.class = "0x5a020c"
        bluez.alias = "Juan's S20 FE"
        device.icon_name = "audio-card-bluetooth"
    Ports:
        phone-input: Phone (type: Phone, priority: 0, available)
    Active Port: phone-input
    Formats:
        pcm


  


  This is the error i am getting when there's no playing audio in my phone.

  


  ffmpeg version 4.4.2-0ubuntu0.22.04.1 Copyright (c) 2000-2021 the FFmpeg developers
  built with gcc 11 (Ubuntu 11.2.0-19ubuntu1)
  configuration: --prefix=/usr --extra-version=0ubuntu0.22.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-pocketsphinx --enable-librsvg --enable-libmfx --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 70.100 / 56. 70.100
  libavcodec     58.134.100 / 58.134.100
  libavformat    58. 76.100 / 58. 76.100
  libavdevice    58. 13.100 / 58. 13.100
  libavfilter     7.110.100 /  7.110.100
  libswscale      5.  9.100 /  5.  9.100
  libswresample   3.  9.100 /  3.  9.100
  libpostproc    55.  9.100 / 55.  9.100
Guessed Channel Layout for Input Stream #0.0 : mono
Input #0, pulse, from 'alsa_input.usb-KTMicro_KT_USB_Audio_2021-06-25-0000-0000-0000--00.mono-fallback':
  Duration: N/A, start: 1694557964.268337, bitrate: 705 kb/s
  Stream #0:0: Audio: pcm_s16le, 44100 Hz, mono, s16, 705 kb/s
bluez_source.84_5F_04_75_B9_F6.a2dp_source: Input/output error



  


• PHP-FFMpeg not converting (error with ffmpeg)

  13 août 2016, par Magurean Dan Sergiu

  I have installed ffmpeg server side with all the dependencies, updated it. And then installed PHP-FFMpeg with Composer. Tested that ffmpeg is instaled with a ssh conexion.

  root@host [/opt/ffmpeg]# ffmpeg
  
  ffmpeg version N-81322-ge8b355a Copyright (c) 2000-2016 the FFmpeg developers
  
  built with gcc 4.4.7 (GCC) 20120313 (Red Hat 4.4.7-17)
  
  configuration: --disable-yasm
  
  libavutil      55. 28.100 / 55. 28.100
  
  libavcodec     57. 51.100 / 57. 51.100
  
  libavformat    57. 46.100 / 57. 46.100
  
  libavdevice    57.  0.102 / 57.  0.102
  
  libavfilter     6. 51.100 /  6. 51.100
  
  libswscale      4.  1.100 /  4.  1.100
  
  libswresample   2.  1.100 /  2.  1.100
  
  Hyper fast Audio and Video encoder
  
  usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options]     outfile}...
  
  
  
  Use -h to get full help or, even better, run 'man ffmpeg'

  But when I try to convert a video file with a php script it throws me a very long error.
  PHP Code :

  <?PHP
  
  include($_SERVER['DOCUMENT_ROOT']."/vendors/install/vendor/autoload.php");
  
  $ffmpeg = FFMpeg\FFMpeg::create();
  
  $video = $ffmpeg->open($_SERVER['DOCUMENT_ROOT'].'/resources/uploads/96048/ffd3c5e349fa5745159deef163b5c253.wmv');
  
  $video
  
         ->filters()
  
         ->synchronize();
  
  $format = new FFMpeg\Format\Video\X264();
  
  $format->on('progress', function ($video, $format, $percentage) {
  
      echo "$percentage % transcoded";});
  
  $video
  
        ->save($format,$_SERVER['DOCUMENT_ROOT'].'/resources/uploads/96048/ffd3c5e349fa5745159deef163b5c253.mp4');
  
  ?>

  Error displayed :

  <b>Fatal error</b>:  Uncaught exception 'Alchemy\BinaryDriver\Exception\ExecutionFailureException' with message 'ffmpeg failed to execute command '/usr/local/bin/ffmpeg' '-y' '-i' '/home/user/working/resources/uploads/23097/2efeb41a1a7085a1dbd469c4895ac23e.wmv' '-async' '1' '-metadata:s:v:0' 'start_time=0' '-threads' '12' '-vcodec' 'libx264' '-acodec' 'libfaac' '-b:v' '1000k' '-refs' '6' '-coder' '1' '-sc_threshold' '40' '-flags' '+loop' '-me_range' '16' '-subq' '7' '-i_qfactor' '0.71' '-qcomp' '0.6' '-qdiff' '4' '-trellis' '1' '-b:a' '128k' '-pass' '1' '-passlogfile' '/tmp/ffmpeg-passes57ad320a1b685j794u/pass-57ad320a1b716' '/home/user/working/resources/uploads/23097/2efeb41a1a7085a1dbd469c4895ac23e.mp4'' in /home/user/working/vendors/install/vendor/alchemy/binary-driver/src/Alchemy/BinaryDriver/ProcessRunner.php:100↵Stack trace:↵#0 /home/user/working/vendors/install/vendor/alchemy/binary-driver/src/Alchemy/BinaryDriver/ProcessRunner.php(72): Alchemy\BinaryDriver\ProcessRunner-&amp;gt;doExecutionFailure(''/usr/bin/ffmpe...')↵#1 / in <b>/home/user/working/vendors/install/vendor/php-ffmpeg/php-ffmpeg/src/FFMpeg/Media/Video.php</b> on line <b>168</b><br />↵"

  Then I have took the basic code displayed upwards and ran it directly through ssh.

  '/usr/local/bin/ffmpeg' '-y' '-i' '/home/user/working/resources/uploads/23097/2efeb41a1a7085a1dbd469c4895ac23e.wmv' '-async' '1' '-metadata:s:v:0' 'start_time=0' '-threads' '12' '-vcodec' 'libx264' '-acodec' 'libfaac' '-b:v' '1000k' '-refs' '6' '-coder' '1' '-sc_threshold' '40' '-flags' '+loop' '-me_range' '16' '-subq' '7' '-i_qfactor' '0.71' '-qcomp' '0.6' '-qdiff' '4' '-trellis' '1' '-b:a' '128k' '-pass' '1' '-passlogfile' '/tmp/ffmpeg-passes57ad320a1b685j794u/pass-57ad320a1b716' '/home/user/working/resources/uploads/23097/2efeb41a1a7085a1dbd469c4895ac23e.mp4'

  And this is the response I get :

  ffmpeg version N-81322-ge8b355a Copyright (c) 2000-2016 the FFmpeg developers
  
    built with gcc 4.4.7 (GCC) 20120313 (Red Hat 4.4.7-17)
  
    configuration: --disable-yasm
  
    libavutil      55. 28.100 / 55. 28.100
  
    libavcodec     57. 51.100 / 57. 51.100
  
    libavformat    57. 46.100 / 57. 46.100
  
    libavdevice    57.  0.102 / 57.  0.102
  
    libavfilter     6. 51.100 /  6. 51.100
  
    libswscale      4.  1.100 /  4.  1.100
  
    libswresample   2.  1.100 /  2.  1.100
  
  Guessed Channel Layout for Input Stream #0.0 : stereo
  
  Input #0, asf, from '/home/user/working/resources/uploads/23097/2efeb41a1a7085a1dbd469c4895ac23e.wmv':
  
    Metadata:
  
      SfOriginalFPS   : 299700
  
      WMFSDKVersion   : 11.0.6001.7000
  
      WMFSDKNeeded    : 0.0.0.0000
  
      comment         : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball
  
      title           : Wildlife in HD
  
      copyright       : © 2008 Microsoft Corporation
  
      IsVBR           : 0
  
      DeviceConformanceTemplate: AP@L3
  
    Duration: 00:00:30.09, start: 0.000000, bitrate: 6977 kb/s
  
      Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, 2 channels, fltp, 192 kb/s
  
      Stream #0:1(eng): Video: vc1 (Advanced) (WVC1 / 0x31435657), yuv420p, 1280x720, 5942 kb/s, 29.97 fps, 29.97 tbr, 1k tbn, 1k tbc
  
  Unknown encoder 'libx264'

  My question is what to do next ? I have wasted 3 days to make this work and this is the furthest I have come. How can I test if libx264 is installed corectly ? And if it is not installed corectly how cand I reinstal or make it work ?

• Raspberry Pi Youtube Stream with ffmpeg : libx264 unknown

  21 juillet 2016, par tm011036

  I want to use my raspberry pi 3 for a youtube stream via an usb camera. Therefore, I compiled and installed the following tools :

  ffmpeg, libx264, libav-tools

  However, when running the following code i always get an error that the libx264 encoder is unknown :

  ffmpeg -f v4l2 -framerate 25 -video_size 640x480 -i /dev/video0 
  
  -codec:v libx264 -b:v 700k -maxrate 700k -bufsize 700k -an -f 
  
  flv rtmp://a.rtmp.youtube.com/live2/MYYOUTUBECODE

  I installed x264 via clone and make install using this guideline. How can I check if this encoder was installed correctly ? I am already stuck for 2 days on this problem - please help !

  Related hints (e.g. libavcodec-extra codec, type errors) regarding this problem unfortunately also didn’t help further.

  Thank You.

  The entire console output is :

  ffmpeg version N-81043-ga49ed9e Copyright (c) 2000-2016 the FFmpeg developers
  
    built with gcc 4.9.2 (Raspbian 4.9.2-10)
  
    configuration: 
  
    libavutil      55. 28.100 / 55. 28.100
  
    libavcodec     57. 50.100 / 57. 50.100
  
    libavformat    57. 42.100 / 57. 42.100
  
    libavdevice    57.  0.102 / 57.  0.102
  
    libavfilter     6. 47.100 /  6. 47.100
  
    libswscale      4.  1.100 /  4.  1.100
  
    libswresample   2.  1.100 /  2.  1.100
  
  [video4linux2,v4l2 @ 0x24132f0] The driver changed the time per frame from 1/25 to 1/30
  
  Input #0, video4linux2,v4l2, from '/dev/video0':
  
  Duration: N/A, start: 161119.368327, bitrate: 147456 kb/s
  
  Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 640x480,     
  
  147456 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
  
  
  
  Unknown encoder 'libx264'