Sur d’autres sites (9391)

• Could not write header for output file #0 (incorrect codec parameters ?) : No such file or directory

  1er juillet 2019, par playmaker420

  Im trying to trans code a mp4 file using the following command using a ffmpeg static build

  ./ffmpeg -i /tmp/tools/file_example.mp4 -map 0 -map 0 -map 0 -map 0 -c:v libx265 -f dash \
  
  -b:v:0 25M -b:v:1 15M -b:v:2 6M -b:v:3 1M -maxrate 25M -bufsize 1835k -s:v:0 3840x2160 \
  
  -s:v:1 3840x2160 -s:v:2 1920x1080 -s:v:3 1920x1080 -keyint_min 150 -g 150 \ /tmp/tools/example/4k.mpd

  On executing the command im getting the following exception

   ./ffmpeg -i /tmp/tools/file_example.mp4 -map 0 -map 0 -map 0 -map 0 -c:v libx265 -f dash -b:v:0 25M -b:v:1 15M -b:v:2 6M -b:v:3 1M -maxrate 25M -bufsize 1835k -s:v:0 3840x2160 -s:v:1 3840x2160 -s:v:2 1920x1080 -s:v:3 1920x1080 -keyint_min 150 -g 150 \ /tmp/tools/example/
  
  ffmpeg version 4.1.3-static https://johnvansickle.com/ffmpeg/  Copyright (c) 2000-2019 the FFmpeg developers
  
    built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516
  
    configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc-6 --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzvbi --enable-libzimg
  
    libavutil      56. 22.100 / 56. 22.100
  
    libavcodec     58. 35.100 / 58. 35.100
  
    libavformat    58. 20.100 / 58. 20.100
  
    libavdevice    58.  5.100 / 58.  5.100
  
    libavfilter     7. 40.101 /  7. 40.101
  
    libswscale      5.  3.100 /  5.  3.100
  
    libswresample   3.  3.100 /  3.  3.100
  
    libpostproc    55.  3.100 / 55.  3.100
  
  Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/tmp/tools/file_example.mp4':
  
    Metadata:
  
      major_brand     : mp42
  
      minor_version   : 0
  
      compatible_brands: mp42mp41isomavc1
  
      creation_time   : 2015-08-07T09:13:36.000000Z
  
    Duration: 00:00:30.53, start: 0.000000, bitrate: 4675 kb/s
  
      Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709), 1920x1080 [SAR 1:1 DAR 16:9], 4486 kb/s, 30 fps, 30 tbr, 30 tbn, 60 tbc (default)
  
      Metadata:
  
        creation_time   : 2015-08-07T09:13:36.000000Z
  
        handler_name    : L-SMASH Video Handler
  
        encoder         : AVC Coding
  
      Stream #0:1(und): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 256 kb/s (default)
  
      Metadata:
  
        creation_time   : 2015-08-07T09:13:36.000000Z
  
        handler_name    : L-SMASH Audio Handler
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (h264 (native) -> hevc (libx265))
  
    Stream #0:1 -> #0:1 (aac (native) -> aac (native))
  
    Stream #0:0 -> #0:2 (h264 (native) -> hevc (libx265))
  
    Stream #0:1 -> #0:3 (aac (native) -> aac (native))
  
    Stream #0:0 -> #0:4 (h264 (native) -> hevc (libx265))
  
    Stream #0:1 -> #0:5 (aac (native) -> aac (native))
  
    Stream #0:0 -> #0:6 (h264 (native) -> hevc (libx265))
  
    Stream #0:1 -> #0:7 (aac (native) -> aac (native))
  
  Press [q] to stop, [?] for help
  
  x265 [info]: HEVC encoder version 3.0ed72af837053
  
  x265 [info]: build info [Linux][GCC 6.3.0][64 bit] 8bit+10bit+12bit
  
  x265 [info]: using cpu capabilities: MMX2 SSE2Fast LZCNT SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  x265 [info]: Main profile, Level-5 (Main tier)
  
  x265 [info]: Thread pool created using 4 threads
  
  x265 [info]: Slices                              : 1
  
  x265 [info]: frame threads / pool features       : 2 / wpp(34 rows)
  
  x265 [info]: Coding QT: max CU size, min CU size : 64 / 8
  
  x265 [info]: Residual QT: max TU size, max depth : 32 / 1 inter / 1 intra
  
  x265 [info]: ME / range / subpel / merge         : hex / 57 / 2 / 2
  
  x265 [info]: Keyframe min / max / scenecut / bias: 25 / 250 / 40 / 5.00
  
  x265 [info]: Lookahead / bframes / badapt        : 20 / 4 / 2
  
  x265 [info]: b-pyramid / weightp / weightb       : 1 / 1 / 0
  
  x265 [info]: References / ref-limit  cu / depth  : 3 / on / on
  
  x265 [info]: AQ: mode / str / qg-size / cu-tree  : 2 / 1.0 / 32 / 1
  
  x265 [info]: Rate Control / qCompress            : ABR-25000 kbps / 0.60
  
  x265 [info]: VBV/HRD buffer / max-rate / init    : 1835 / 25000 / 0.750
  
  x265 [info]: tools: rd=3 psy-rd=2.00 rskip signhide tmvp strong-intra-smoothing
  
  x265 [info]: tools: lslices=8 deblock sao
  
  x265 [info]: HEVC encoder version 3.0ed72af837053
  
  x265 [info]: build info [Linux][GCC 6.3.0][64 bit] 8bit+10bit+12bit
  
  x265 [info]: using cpu capabilities: MMX2 SSE2Fast LZCNT SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  x265 [info]: Main profile, Level-5 (Main tier)
  
  x265 [info]: Thread pool created using 4 threads
  
  x265 [info]: Slices                              : 1
  
  x265 [info]: frame threads / pool features       : 2 / wpp(34 rows)
  
  x265 [info]: Coding QT: max CU size, min CU size : 64 / 8
  
  x265 [info]: Residual QT: max TU size, max depth : 32 / 1 inter / 1 intra
  
  x265 [info]: ME / range / subpel / merge         : hex / 57 / 2 / 2
  
  x265 [info]: Keyframe min / max / scenecut / bias: 25 / 250 / 40 / 5.00
  
  x265 [info]: Lookahead / bframes / badapt        : 20 / 4 / 2
  
  x265 [info]: b-pyramid / weightp / weightb       : 1 / 1 / 0
  
  x265 [info]: References / ref-limit  cu / depth  : 3 / on / on
  
  x265 [info]: AQ: mode / str / qg-size / cu-tree  : 2 / 1.0 / 32 / 1
  
  x265 [info]: Rate Control / qCompress            : ABR-15000 kbps / 0.60
  
  x265 [info]: VBV/HRD buffer / max-rate / init    : 1835 / 25000 / 0.750
  
  x265 [info]: tools: rd=3 psy-rd=2.00 rskip signhide tmvp strong-intra-smoothing
  
  x265 [info]: tools: lslices=8 deblock sao
  
  x265 [info]: HEVC encoder version 3.0ed72af837053
  
  x265 [info]: build info [Linux][GCC 6.3.0][64 bit] 8bit+10bit+12bit
  
  x265 [info]: using cpu capabilities: MMX2 SSE2Fast LZCNT SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  x265 [info]: Main profile, Level-4 (High tier)
  
  x265 [info]: Thread pool created using 4 threads
  
  x265 [info]: Slices                              : 1
  
  x265 [info]: frame threads / pool features       : 2 / wpp(17 rows)
  
  x265 [info]: Coding QT: max CU size, min CU size : 64 / 8
  
  x265 [info]: Residual QT: max TU size, max depth : 32 / 1 inter / 1 intra
  
  x265 [info]: ME / range / subpel / merge         : hex / 57 / 2 / 2
  
  x265 [info]: Keyframe min / max / scenecut / bias: 25 / 250 / 40 / 5.00
  
  x265 [info]: Lookahead / bframes / badapt        : 20 / 4 / 2
  
  x265 [info]: b-pyramid / weightp / weightb       : 1 / 1 / 0
  
  x265 [info]: References / ref-limit  cu / depth  : 3 / on / on
  
  x265 [info]: AQ: mode / str / qg-size / cu-tree  : 2 / 1.0 / 32 / 1
  
  x265 [info]: Rate Control / qCompress            : ABR-6000 kbps / 0.60
  
  x265 [info]: VBV/HRD buffer / max-rate / init    : 1835 / 25000 / 0.750
  
  x265 [info]: tools: rd=3 psy-rd=2.00 rskip signhide tmvp strong-intra-smoothing
  
  x265 [info]: tools: lslices=6 deblock sao
  
  x265 [info]: HEVC encoder version 3.0ed72af837053
  
  x265 [info]: build info [Linux][GCC 6.3.0][64 bit] 8bit+10bit+12bit
  
  x265 [info]: using cpu capabilities: MMX2 SSE2Fast LZCNT SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
  
  x265 [info]: Main profile, Level-4 (High tier)
  
  x265 [info]: Thread pool created using 4 threads
  
  x265 [info]: Slices                              : 1
  
  x265 [info]: frame threads / pool features       : 2 / wpp(17 rows)
  
  x265 [info]: Coding QT: max CU size, min CU size : 64 / 8
  
  x265 [info]: Residual QT: max TU size, max depth : 32 / 1 inter / 1 intra
  
  x265 [info]: ME / range / subpel / merge         : hex / 57 / 2 / 2
  
  x265 [info]: Keyframe min / max / scenecut / bias: 25 / 250 / 40 / 5.00
  
  x265 [info]: Lookahead / bframes / badapt        : 20 / 4 / 2
  
  x265 [info]: b-pyramid / weightp / weightb       : 1 / 1 / 0
  
  x265 [info]: References / ref-limit  cu / depth  : 3 / on / on
  
  x265 [info]: AQ: mode / str / qg-size / cu-tree  : 2 / 1.0 / 32 / 1
  
  x265 [info]: Rate Control / qCompress            : ABR-1000 kbps / 0.60
  
  x265 [info]: VBV/HRD buffer / max-rate / init    : 1835 / 25000 / 0.750
  
  x265 [info]: tools: rd=3 psy-rd=2.00 rskip signhide tmvp strong-intra-smoothing
  
  x265 [info]: tools: lslices=6 deblock sao
  
  [dash @ 0x5f21000] Opening ' /tmp/tools/example/init-stream0.m4s' for writingtrate=N/A speed=N/A    
  
  Could not write header for output file #0 (incorrect codec parameters ?): No such file or directory
  
  Error initializing output stream 0:7 -- 
  
  x265 [info]: consecutive B-frames: 100.0% 0.0% 0.0% 0.0% 0.0% 
  
  
  
  encoded 0 frames
  
  [aac @ 0x5f30d00] Qavg: -nan
  
  [aac @ 0x5f30d00] 1 frames left in the queue on closing
  
  x265 [info]: consecutive B-frames: 100.0% 0.0% 0.0% 0.0% 0.0% 
  
  
  
  encoded 0 frames
  
  [aac @ 0x5f24ac0] Qavg: -nan
  
  [aac @ 0x5f24ac0] 1 frames left in the queue on closing
  
  x265 [info]: consecutive B-frames: 100.0% 0.0% 0.0% 0.0% 0.0% 
  
  
  
  encoded 0 frames
  
  [aac @ 0x5f33ec0] Qavg: -nan
  
  [aac @ 0x5f33ec0] 1 frames left in the queue on closing
  
  x265 [info]: consecutive B-frames: 100.0% 0.0% 0.0% 0.0% 0.0% 
  
  
  
  encoded 0 frames
  
  [aac @ 0x5f434c0] Qavg: -nan
  
  Conversion failed!

  ffmpeg -version

  ./ffmpeg -version
  
  ffmpeg version 4.1.3-static https://johnvansickle.com/ffmpeg/  Copyright (c) 2000-2019 the FFmpeg developers
  
  built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516
  
  configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc-6 --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzvbi --enable-libzimg
  
  libavutil      56. 22.100 / 56. 22.100
  
  libavcodec     58. 35.100 / 58. 35.100
  
  libavformat    58. 20.100 / 58. 20.100
  
  libavdevice    58.  5.100 / 58.  5.100
  
  libavfilter     7. 40.101 /  7. 40.101
  
  libswscale      5.  3.100 /  5.  3.100
  
  libswresample   3.  3.100 /  3.  3.100
  
  libpostproc    55.  3.100 / 55.  3.100

  Can someone help me to rectify the issue ?

• How to analyse 404 pages

  1er juillet 2019, par Matomo Core Team — Development, Plugins

  How to analyse “not found” pages (404) in digital analytics

  Have you ever sent out a newsletter and one link wasn’t active yet ? Would you like to know how many users get affected when this happens ? Would you like to know if your visitors are encountering 404 pages ? 

  In this article we’re describing an easy way to analyse “not found” pages on your website with Matomo to increase your visitors’ user experience, user acquisition, and SEO (search engine optimization).

  How to know the number of 404s on my website ?

  There are different ways to get this information. Depending on how your website is built, you may or may not collect this data.

  The easiest way to answer this question is to fire a 404 page on your website, you do this by accessing a wrong url :

  

  As you can see here, in our case, the page title starts with “Page non trouvée” which stands for “Page not found” when translated in English (as the website we are considering here is in French) :

  

  In this example 19 page views have been fired and it generated a bounce rate of 67%. As a result ⅔ of the visits ended here.

  In some cases, the information related to a “not found” page can be found either within the title or within the URL, as some websites redirect you to a specific web page when a page can’t be found.

  If you can’t identify “not found” pages via a page title or a page URL, we strongly advise you to use this specific tracking code method on your 404 page : “How to track error pages in Matomo ?”. 

  You can easily set it with Matomo Tag Manager with a custom HTML tag :

  

  where the trigger is the following :

  

  You will however, have to define this trigger as an exclusion for all the other tags which may conflict with it (here below is the new trigger defined for the generic Matomo tags we are inserting on all pages) :

  

  Once this specific tracking is set, you will be able to track the source of the 404 and will gather all the “not found” pages in a specific group within your Page Title report :

  

  Here, for example, you can identify that the homepage of this website had a link pointing to a 404, in our case it was https://www.webassoc.org/pro-du-web.

  Note that this is just one technique. You could also create a custom dimension report and decide to send the 404 there also.

  How to get notified when a 404 page is visited ?

  Trust us, you’re not going to check everyday whether a 404 page has been visited. In order to avoid checking it manually, you can define custom alerts.

  There are three possible scenarios when “not found” pages can be fired :

  • internal 404 : one link within your website is pointing to a wrong url on the same website.
  • external 404 : someone from an external website made a link to yours and the link is not correct.
  • direct access 404 : someone access directly to a not found page on your website.

  You can define all those three within Matomo, but in your case, you will only have to focus on the first two only. In fact, you can’t really fix the third scenario. That’s the reason why we’re not focusing on it. It would result in irrelevant alerts.

  Custom alert for internal 404

  An internal 404 is defined from a 404 where the source is an internal web page. As a result, it will look like the following in your report :

  

  In this example, we’re using this specific custom implementation, the title of the page will contain “From = https://www.webassoc.org/”. So set our custom alert accordingly :

  

  Now every time a 404 page will be fired from an internal page, you’ll be notified by email.

  Note that you can also decide to not receive any email and track the evolution of alerts with the History of triggered alerts feature.

  Custom alert for external 404

  External 404 is almost the same setup. The only thing you need to keep in mind is that we want to exclude the 404 where the source is not indicated. As a result, your configuration will look like the following :

  

  Here your regular expression pattern is the following one :

  404/URL = .*From = (?!https://www.webassoc.org)[^\s]+

  as you’ll want to have any referrer coming from a website which is not Matomo and not a direct 404.

   

  You can now be notified every time that a 404 is fired from any link.

  Note that this configuration may slightly differ from website to website. So always double check your tracking code and the way the values are sent to your reports. Also try to trigger those alerts first before validating them.

  How to follow the evolution of your 404 over time ?

  It may be interesting to know how good or how bad you are performing in terms of 404.

  In order to check this information, you can click on the evolution icon near the 404 title :

  

  But you may be interested in accessing this information more regularly without having to create this report each time.

  So, one way to analyse the evolution of your 404 is to create a segment such as :

  

  and to click after that on evolution icon :

  

  As you can see below the number of “not found” pages is quite low in general, but we can also notice that a period received an increase in terms of 404 not found pages on May 27. It may be interesting to investigate it :

  

  You can start from the overview of referrers :

  

  As you can notice here the main source of 404 is coming from direct entries which is the most difficult channel to analyse as we don’t really know where the visitors are coming from.

  How to perform your analysis even faster ?

  As you can see analysing reports in Matomo in order to detect 404 pages is a time-consuming activity. In order to make it faster, you can already create a report about it within the Email reports feature with the following settings :

  • Segment : 404
  • Email schedule : never.
  • Visits summary and Page titles as selected report.

  You will then end up with a saved report listing all the URLs concerned :

  

  You can also have a look at the “Custom reports” premium feature.

  It will provide you with more flexibility. You will then be able to focus on the most important thing : the cause of 404.

  Good luck and happy analytics !

• Truncated videos in multi input multi output ffmpeg command

  1er août 2019, par Bhupendra Fatnani

  I am trying to copy videos from a CCTV DVR server (6 channels) using rtsp. How do I optimize my ffmpeg command ?

  Below is the configuration :

  ffmpeg version : ffmpeg-4.1.4-win64-static
  CPU : Intel Core i7-8650U @1.9 GHz 2.11 GHz
  RAM : 16 GB

  When I try to download from 3 channels, the videos seem to download fine, but when I use >=4 channels simultaneously, the video from channel 1 truncates almost after about 5 secs, and the output files are much smaller from channel 2 to 4, channel 5 video output has no issues.

  For e.g. here are the output file sizes according to channels.

  Channel 1 : 1.7 MB (truncated)
  
  Channel 2 : 27.5 MB (approx 5 secs video loss in the beginning)
  
  Channel 3 : 28.5 MB (approx 3-4 secs loss)
  
  channel 4 : 29.5 MB (approx 2 secs loss)
  
  Channel 5 : 30 MB (no issues found)

  Below is the command I am trying to use to download.

  ffmpeg -rtsp_transport tcp -thread_queue_size 1024 -i rtsp://<input url="url" 1="1" /> -thread_queue_size 1024 -i rtsp://<input url="url" 2="2" /> -thread_queue_size 1024 -i rtsp://<input url="url" 3="3" /> -thread_queue_size 1024 -i rtsp://<input url="url" 4="4" /> -thread_queue_size 1024 -i rtsp://<input url="url" 5="5" /> -map 0 -vcodec copy -t 60 -y outputfile1.mp4 -map 1 -vcodec copy -t 60 -y outputfile2.mp4 -map 2 -vcodec copy -t 60 -y outputfile3.mp4 -map 3 -vcodec copy -t 60 -y outputfile4.mp4 -map 4 -vcodec copy -t 60 -y outputfile5.mp4

  Below is the actual output :

  ffmpeg version 4.1.4 Copyright (c) 2000-2019 the FFmpeg developers
  
    built with gcc 9.1.1 (GCC) 20190716
  
    configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-amf --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth
  
    libavutil      56. 22.100 / 56. 22.100
  
    libavcodec     58. 35.100 / 58. 35.100
  
    libavformat    58. 20.100 / 58. 20.100
  
    libavdevice    58.  5.100 / 58.  5.100
  
    libavfilter     7. 40.101 /  7. 40.101
  
    libswscale      5.  3.100 /  5.  3.100
  
    libswresample   3.  3.100 /  3.  3.100
  
    libpostproc    55.  3.100 / 55.  3.100
  
  Input #0, rtsp, from 'rtsp://<input url="url" title="title" n="n" />A, start: 0.080000, bitrate: N/A
  
      Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1080, 25 tbr, 90k tbn, 180k tbc
  
  [udp @ 000001f27c6fffc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [udp @ 000001f27c74f400] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [rtsp @ 000001f27c721f40] max delay reached. need to consume packet
  
  [rtsp @ 000001f27c721f40] RTP: missed 15 packets
  
  [h264 @ 000001f27d627ac0] error while decoding MB 71 49, bytestream -6
  
  [h264 @ 000001f27d627ac0] concealing 2258 DC, 2258 AC, 2258 MV errors in P frame
  
  [h264 @ 000001f27d627ac0] Increasing reorder buffer to 1
  
  Input #1, rtsp, from 'rtsp://<input url="url" title="title" n="n" />A, start: 0.040000, bitrate: N/A
  
      Stream #1:0: Video: h264 (High), yuv420p(progressive), 1920x1080, 25 tbr, 90k tbn, 180k tbc
  
  [udp @ 000001f27c6ffc40] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [udp @ 000001f27d2dc180] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [rtsp @ 000001f27d2db700] max delay reached. need to consume packet
  
  [rtsp @ 000001f27d2db700] RTP: missed 15 packets
  
  [h264 @ 000001f27d2dbd00] concealing 7337 DC, 7337 AC, 7337 MV errors in P frame
  
  [h264 @ 000001f27d2dbd00] Increasing reorder buffer to 1
  
  Input #2, rtsp, from '<input url="url" title="title" n="n" />A, start: 0.080000, bitrate: N/A
  
      Stream #2:0: Video: h264 (High), yuv420p(progressive), 1920x1080, 25 tbr, 90k tbn, 180k tbc
  
  [udp @ 000001f27c6ffd00] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [udp @ 000001f27d302bc0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [rtsp @ 000001f27cfe9200] max delay reached. need to consume packet
  
  [rtsp @ 000001f27cfe9200] RTP: missed 44 packets
  
  [h264 @ 000001f27cfe6c40] error while decoding MB 41 24, bytestream -8
  
  [h264 @ 000001f27cfe6c40] concealing 5288 DC, 5288 AC, 5288 MV errors in P frame
  
  [h264 @ 000001f27cfe6c40] Increasing reorder buffer to 1
  
  Input #3, rtsp, from '<input url="url" title="title" n="n" />A, start: 0.080000, bitrate: N/A
  
      Stream #3:0: Video: h264 (High), yuv420p(progressive), 1920x1080, 25 tbr, 90k tbn, 180k tbc
  
  [udp @ 000001f27cfe0940] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [udp @ 000001f27dd1bec0] 'circular_buffer_size' option was set but it is not supported on this build (pthread support is required)
  
  [rtsp @ 000001f27daaf040] max delay reached. need to consume packet
  
  [rtsp @ 000001f27daaf040] RTP: missed 107 packets
  
  [h264 @ 000001f27dc05040] concealing 1340 DC, 1340 AC, 1340 MV errors in P frame
  
  [rtsp @ 000001f27daaf040] max delay reached. need to consume packet
  
  [rtsp @ 000001f27daaf040] RTP: missed 28 packets
  
  [h264 @ 000001f27dc05040] Increasing reorder buffer to 1
  
  [h264 @ 000001f27dc05040] concealing 6961 DC, 6961 AC, 6961 MV errors in P frame
  
  [rtsp @ 000001f27daaf040] max delay reached. need to consume packet
  
  [rtsp @ 000001f27daaf040] RTP: missed 53 packets
  
  [h264 @ 000001f27dc05040] error while decoding MB 16 40, bytestream -18
  
  [h264 @ 000001f27dc05040] concealing 3393 DC, 3393 AC, 3393 MV errors in I frame
  
  Input #4, rtsp, from 'rtsp://<input url="url" title="title" n="n" />A, start: 0.120000, bitrate: N/A
  
      Stream #4:0: Video: h264 (High), yuv420p(progressive), 1920x1080, 25 tbr, 90k tbn, 180k tbc
  
  Output #0, mp4, to 'outputfile1.mp4':
  
    Metadata:
  
      title           : -
  
      encoder         : Lavf58.20.100
  
      Stream #0:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080, q=2-31, 25 tbr, 90k tbn, 90k tbc
  
  Output #1, mp4, to 'outputfile2.mp4':
  
    Metadata:
  
      title           : -
  
      encoder         : Lavf58.20.100
  
      Stream #1:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080, q=2-31, 25 tbr, 90k tbn, 90k tbc
  
  Output #2, mp4, to 'outputfile3.mp4':
  
    Metadata:
  
      title           : -
  
      encoder         : Lavf58.20.100
  
      Stream #2:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080, q=2-31, 25 tbr, 90k tbn, 90k tbc
  
  Output #3, mp4, to 'outputfile4.mp4':
  
    Metadata:
  
      title           : -
  
      encoder         : Lavf58.20.100
  
      Stream #3:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080, q=2-31, 25 tbr, 90k tbn, 90k tbc
  
  Output #4, mp4, to 'outputfile5.mp4':
  
    Metadata:
  
      title           : -
  
      encoder         : Lavf58.20.100
  
      Stream #4:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080, q=2-31, 25 tbr, 90k tbn, 90k tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (copy)
  
    Stream #1:0 -> #1:0 (copy)
  
    Stream #2:0 -> #2:0 (copy)
  
    Stream #3:0 -> #3:0 (copy)
  
    Stream #4:0 -> #4:0 (copy)
  
  Press [q] to stop, [?] for help
  
  [mp4 @ 000001f27dd0d8c0] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
  
  [mp4 @ 000001f27dd09040] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
  
  [mp4 @ 000001f27dd09040] pts has no value
  
  [mp4 @ 000001f27dc054c0] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
  
  [mp4 @ 000001f27dc054c0] pts has no value
  
  [mp4 @ 000001f27ddf86c0] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
  
  [mp4 @ 000001f27ddf86c0] pts has no value
  
  [mp4 @ 000001f27c743b00] Timestamps are unset in a packet for stream 0. This is deprecated and will stop working in the future. Fix your code to set the timestamps properly
  
  [mp4 @ 000001f27c743b00] pts has no value
  
  [mp4 @ 000001f27dd0d8c0] Non-monotonous DTS in output stream 0:0; previous: 0, current: 0; changing to 1. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27dd09040] Non-monotonous DTS in output stream 1:0; previous: 0, current: 0; changing to 1. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27dc054c0] Non-monotonous DTS in output stream 2:0; previous: 0, current: 0; changing to 1. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27ddf86c0] Non-monotonous DTS in output stream 3:0; previous: 0, current: 0; changing to 1. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27c743b00] Non-monotonous DTS in output stream 4:0; previous: 0, current: 0; changing to 1. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27dd09040] Non-monotonous DTS in output stream 1:0; previous: 1, current: 0; changing to 2. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27dc054c0] Non-monotonous DTS in output stream 2:0; previous: 1, current: 0; changing to 2. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27ddf86c0] Non-monotonous DTS in output stream 3:0; previous: 1, current: 0; changing to 2. This may result in incorrect timestamps in the output file.
  
  [mp4 @ 000001f27c743b00] Non-monotonous DTS in output stream 4:0; previous: 1, current: 0; changing to 2. This may result in incorrect timestamps in the output file.
  
  [rtsp @ 000001f27d2db700] max delay reached. need to consume packet
  
  [rtsp @ 000001f27d2db700] RTP: missed 1644 packets
  
  [rtsp @ 000001f27c721f40] max delay reached. need to consume packet
  
  [rtsp @ 000001f27c721f40] RTP: missed 2461 packets
  
  [rtsp @ 000001f27cfe9200] max delay reached. need to consume packet
  
  [rtsp @ 000001f27cfe9200] RTP: missed 733 packets
  
  frame=   46 fps=0.8 q=-1.0 Lq=-1.0 q=-1.0 q=-1.0 q=-1.0 size=    1790kB time=00:00:59.99 bitrate= 244.4kbits/s speed=1.04x
  
  video:119011kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown

  Could somebody please help me optimize the ffmpeg command ?