Recherche avancée

Sur d’autres sites (9064)

• HTTP Livestreaming with ffmpeg

  25 août 2016, par Hugo14453

  Some context : I have an MKV file, I am attempting to stream it to http://localhost:8090/test.flv as an flv file.

  The stream begins and then immediately ends.

  The command I am using is :

  sudo ffmpeg -re -i input.mkv -c:v libx264 -maxrate 1000k -bufsize 2000k -an -bsf:v h264_mp4toannexb -g 50 http://localhost:8090/test.flv

  A breakdown of what I believe these options do incase this post becomes useful for someone else :

  sudo

  Run as root

  ffmpeg

  The stream command thingy

  -re

  Stream in real-time

  -i input.mkv

  Input option and path to input file

  -c:v libx264

  Use codec libx264 for conversion

  -maxrate 1000k -bufsize 2000k

  No idea, some options for conversion, seems to help

  -an -bsf:v h264_mp4toannexb

  Audio options I think, not sure really. Also seems to help

  -g 50

  Still no idea, maybe frame rateframerateframerateframerate ?

  http://localhost:8090/test.flv

  Output using http protocol to localhost on port 8090 as a file called test.flv

  Anyway the actual issue I have is that it begins to stream for about a second and then immediately ends.

  The mpeg command result :

  ffmpeg version N-80901-gfebc862 Copyright (c) 2000-2016 the FFmpeg developers
  
    built with gcc 4.8 (Ubuntu 4.8.4-2ubuntu1~14.04.3)
  
    configuration: --extra-libs=-ldl --prefix=/opt/ffmpeg --mandir=/usr/share/man --enable-avresample --disable-debug --enable-nonfree --enable-gpl --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --disable-decoder=amrnb --disable-decoder=amrwb --enable-libpulse --enable-libfreetype --enable-gnutls --enable-libx264 --enable-libx265 --enable-libfdk-aac --enable-libvorbis --enable-libmp3lame --enable-libopus --enable-libvpx --enable-libspeex --enable-libass --enable-avisynth --enable-libsoxr --enable-libxvid --enable-libvidstab
  
    libavutil      55. 28.100 / 55. 28.100
  
    libavcodec     57. 48.101 / 57. 48.101
  
    libavformat    57. 41.100 / 57. 41.100
  
    libavdevice    57.  0.102 / 57.  0.102
  
    libavfilter     6. 47.100 /  6. 47.100
  
    libavresample   3.  0.  0 /  3.  0.  0
  
    libswscale      4.  1.100 /  4.  1.100
  
    libswresample   2.  1.100 /  2.  1.100
  
    libpostproc    54.  0.100 / 54.  0.100
  
  Input #0, matroska,webm, from 'input.mkv':
  
    Metadata:
  
      encoder         : libebml v1.3.0 + libmatroska v1.4.0
  
      creation_time   : 1970-01-01 00:00:02
  
    Duration: 00:01:32.26, start: 0.000000, bitrate: 4432 kb/s
  
      Stream #0:0(eng): Video: h264 (High 10), yuv420p10le, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
  
      Stream #0:1(nor): Audio: flac, 48000 Hz, stereo, s16 (default)
  
  [libx264 @ 0x2e1c380] using SAR=1/1
  
  [libx264 @ 0x2e1c380] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
  
  [libx264 @ 0x2e1c380] profile High, level 4.0
  
  [libx264 @ 0x2e1c380] 264 - core 148 r2643 5c65704 - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=1 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=50 keyint_min=5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=1000 vbv_bufsize=2000 crf_max=0.0 nal_hrd=none filler=0 ip_ratio=1.40 aq=1:1.00
  
  [flv @ 0x2e3f0a0] Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
  
  Output #0, flv, to 'http://localhost:8090/test.flv':
  
    Metadata:
  
      encoder         : Lavf57.41.100
  
      Stream #0:0(eng): Video: h264 (libx264) ([7][0][0][0] / 0x0007), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], q=-1--1, 23.98 fps, 1k tbn, 23.98 tbc (default)
  
      Metadata:
  
        encoder         : Lavc57.48.101 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 1000000/0/0 buffer size: 2000000 vbv_delay: -1
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
  
  Press [q] to stop, [?] for help
  
  Killed   26 fps= 26 q=0.0 size=       0kB time=00:00:00.00 bitrate=N/A speed=   0x  

  The ffserver outputs :

  Sat Aug 20 12:40:11 2016 File '/test.flv' not found
  
  Sat Aug 20 12:40:11 2016 [SERVER IP] - - [POST] "/test.flv HTTP/1.1" 404 189

  The config file is :

  #Sample ffserver configuration file
  
  
  
  # Port on which the server is listening. You must select a different
  
  # port from your standard HTTP web server if it is running on the same
  
  # computer.
  
  Port 8090
  
  
  
  # Address on which the server is bound. Only useful if you have
  
  # several network interfaces.
  
  BindAddress 0.0.0.0
  
  
  
  # Number of simultaneous HTTP connections that can be handled. It has
  
  # to be defined *before* the MaxClients parameter, since it defines the
  
  # MaxClients maximum limit.
  
  MaxHTTPConnections 2000
  
  
  
  # Number of simultaneous requests that can be handled. Since FFServer
  
  # is very fast, it is more likely that you will want to leave this high
  
  # and use MaxBandwidth, below.
  
  MaxClients 1000
  
  
  
  # This the maximum amount of kbit/sec that you are prepared to
  
  # consume when streaming to clients.
  
  MaxBandwidth 1000
  
  
  
  # Access log file (uses standard Apache log file format)
  
  # '-' is the standard output.
  
  CustomLog -
  
  
  
  # Suppress that if you want to launch ffserver as a daemon.
  
  #NoDaemon
  
  
  
  
  
  ##################################################################
  
  # Definition of the live feeds. Each live feed contains one video
  
  # and/or audio sequence coming from an ffmpeg encoder or another
  
  # ffserver. This sequence may be encoded simultaneously with several
  
  # codecs at several resolutions.
  
  
  
  <feed>
  
  
  
  ACL allow 192.168.0.0 192.168.255.255
  
  
  
  # You must use 'ffmpeg' to send a live feed to ffserver. In this
  
  # example, you can type:
  
  #
  
  #ffmpeg http://localhost:8090/test.ffm
  
  
  
  # ffserver can also do time shifting. It means that it can stream any
  
  # previously recorded live stream. The request should contain:
  
  # "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
  
  # a path where the feed is stored on disk. You also specify the
  
  # maximum size of the feed, where zero means unlimited. Default:
  
  # File=/tmp/feed_name.ffm FileMaxSize=5M
  
  File /tmp/feed1.ffm
  
  FileMaxSize 200m
  
  
  
  # You could specify
  
  # ReadOnlyFile /saved/specialvideo.ffm
  
  # This marks the file as readonly and it will not be deleted or updated.
  
  
  
  # Specify launch in order to start ffmpeg automatically.
  
  # First ffmpeg must be defined with an appropriate path if needed,
  
  # after that options can follow, but avoid adding the http:// field
  
  #Launch ffmpeg
  
  
  
  # Only allow connections from localhost to the feed.
  
      ACL allow 127.0.0.1
  
  
  
  </feed>
  
  
  
  
  
  ##################################################################
  
  # Now you can define each stream which will be generated from the
  
  # original audio and video stream. Each format has a filename (here
  
  # 'test1.mpg'). FFServer will send this stream when answering a
  
  # request containing this filename.
  
  
  
  <stream>
  
  
  
  # coming from live feed 'feed1'
  
  Feed feed1.ffm
  
  
  
  # Format of the stream : you can choose among:
  
  # mpeg       : MPEG-1 multiplexed video and audio
  
  # mpegvideo  : only MPEG-1 video
  
  # mp2        : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
  
  # ogg        : Ogg format (Vorbis audio codec)
  
  # rm         : RealNetworks-compatible stream. Multiplexed audio and video.
  
  # ra         : RealNetworks-compatible stream. Audio only.
  
  # mpjpeg     : Multipart JPEG (works with Netscape without any plugin)
  
  # jpeg       : Generate a single JPEG image.
  
  # asf        : ASF compatible streaming (Windows Media Player format).
  
  # swf        : Macromedia Flash compatible stream
  
  # avi        : AVI format (MPEG-4 video, MPEG audio sound)
  
  Format mpeg
  
  
  
  # Bitrate for the audio stream. Codecs usually support only a few
  
  # different bitrates.
  
  AudioBitRate 32
  
  
  
  # Number of audio channels: 1 = mono, 2 = stereo
  
  AudioChannels 2
  
  
  
  # Sampling frequency for audio. When using low bitrates, you should
  
  # lower this frequency to 22050 or 11025. The supported frequencies
  
  # depend on the selected audio codec.
  
  AudioSampleRate 44100
  
  
  
  # Bitrate for the video stream
  
  VideoBitRate 64
  
  
  
  # Ratecontrol buffer size
  
  VideoBufferSize 40
  
  
  
  # Number of frames per second
  
  VideoFrameRate 3
  
  
  
  # Size of the video frame: WxH (default: 160x128)
  
  # The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
  
  # qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
  
  # wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
  
  # hd1080
  
  VideoSize hd1080
  
  
  
  # Transmit only intra frames (useful for low bitrates, but kills frame rate).
  
  #VideoIntraOnly
  
  
  
  # If non-intra only, an intra frame is transmitted every VideoGopSize
  
  # frames. Video synchronization can only begin at an intra frame.
  
  VideoGopSize 12
  
  
  
  # More MPEG-4 parameters
  
  # VideoHighQuality
  
  # Video4MotionVector
  
  
  
  # Choose your codecs:
  
  #AudioCodec mp2
  
  #VideoCodec mpeg1video
  
  
  
  # Suppress audio
  
  #NoAudio
  
  
  
  # Suppress video
  
  #NoVideo
  
  
  
  #VideoQMin 3
  
  #VideoQMax 31
  
  
  
  # Set this to the number of seconds backwards in time to start. Note that
  
  # most players will buffer 5-10 seconds of video, and also you need to allow
  
  # for a keyframe to appear in the data stream.
  
  #Preroll 15
  
  
  
  # ACL:
  
  
  
  # You can allow ranges of addresses (or single addresses)
  
  ACL ALLOW localhost
  
  
  
  # You can deny ranges of addresses (or single addresses)
  
  #ACL DENY <first address="address"> 
  
  
  
  # You can repeat the ACL allow/deny as often as you like. It is on a per
  
  # stream basis. The first match defines the action. If there are no matches,
  
  # then the default is the inverse of the last ACL statement.
  
  #
  
  # Thus 'ACL allow localhost' only allows access from localhost.
  
  # 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
  
  # allow everybody else.
  
  
  
  </first></stream>
  
  
  
  
  
  ##################################################################
  
  # Example streams
  
  
  
  
  
  # Multipart JPEG
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format mpjpeg
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  #NoAudio
  
  #Strict -1
  
  #</stream>
  
  
  
  
  
  # Single JPEG
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format jpeg
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  ##VideoSize 352x240
  
  #NoAudio
  
  #Strict -1
  
  #</stream>
  
  
  
  
  
  # Flash
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format swf
  
  #VideoFrameRate 2
  
  #VideoIntraOnly
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  # ASF compatible
  
  
  
  <stream>
  
  Feed feed1.ffm
  
  Format asf
  
  VideoFrameRate 15
  
  VideoSize 352x240
  
  VideoBitRate 256
  
  VideoBufferSize 40
  
  VideoGopSize 30
  
  AudioBitRate 64
  
  StartSendOnKey
  
  </stream>
  
  
  
  
  
  # MP3 audio
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format mp2
  
  #AudioCodec mp3
  
  #AudioBitRate 64
  
  #AudioChannels 1
  
  #AudioSampleRate 44100
  
  #NoVideo
  
  #</stream>
  
  
  
  
  
  # Ogg Vorbis audio
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Title "Stream title"
  
  #AudioBitRate 64
  
  #AudioChannels 2
  
  #AudioSampleRate 44100
  
  #NoVideo
  
  #</stream>
  
  
  
  
  
  # Real with audio only at 32 kbits
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format rm
  
  #AudioBitRate 32
  
  #NoVideo
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  # Real with audio and video at 64 kbits
  
  
  
  #<stream>
  
  #Feed feed1.ffm
  
  #Format rm
  
  #AudioBitRate 32
  
  #VideoBitRate 128
  
  #VideoFrameRate 25
  
  #VideoGopSize 25
  
  #NoAudio
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # A stream coming from a file: you only need to set the input
  
  # filename and optionally a new format. Supported conversions:
  
  #    AVI -> ASF
  
  
  
  #<stream>
  
  #File "/usr/local/httpd/htdocs/tlive.rm"
  
  #NoAudio
  
  #</stream>
  
  
  
  #<stream>
  
  #File "/usr/local/httpd/htdocs/test.asf"
  
  #NoAudio
  
  #Author "Me"
  
  #Copyright "Super MegaCorp"
  
  #Title "Test stream from disk"
  
  #Comment "Test comment"
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # RTSP examples
  
  #
  
  # You can access this stream with the RTSP URL:
  
  #   rtsp://localhost:5454/test1-rtsp.mpg
  
  #
  
  # A non-standard RTSP redirector is also created. Its URL is:
  
  #   http://localhost:8090/test1-rtsp.rtsp
  
  
  
  #<stream>
  
  #Format rtp
  
  #File "/usr/local/httpd/htdocs/test1.mpg"
  
  #</stream>
  
  
  
  
  
  # Transcode an incoming live feed to another live feed,
  
  # using libx264 and video presets
  
  
  
  #<stream>
  
  #Format rtp
  
  #Feed feed1.ffm
  
  #VideoCodec libx264
  
  #VideoFrameRate 24
  
  #VideoBitRate 100
  
  #VideoSize 480x272
  
  #AVPresetVideo default
  
  #AVPresetVideo baseline
  
  #AVOptionVideo flags +global_header
  
  #
  
  #AudioCodec libfaac
  
  #AudioBitRate 32
  
  #AudioChannels 2
  
  #AudioSampleRate 22050
  
  #AVOptionAudio flags +global_header
  
  #</stream>
  
  
  
  ##################################################################
  
  # SDP/multicast examples
  
  #
  
  # If you want to send your stream in multicast, you must set the
  
  # multicast address with MulticastAddress. The port and the TTL can
  
  # also be set.
  
  #
  
  # An SDP file is automatically generated by ffserver by adding the
  
  # 'sdp' extension to the stream name (here
  
  # http://localhost:8090/test1-sdp.sdp). You should usually give this
  
  # file to your player to play the stream.
  
  #
  
  # The 'NoLoop' option can be used to avoid looping when the stream is
  
  # terminated.
  
  
  
  #<stream>
  
  #Format rtp
  
  #File "/usr/local/httpd/htdocs/test1.mpg"
  
  #MulticastAddress 224.124.0.1
  
  #MulticastPort 5000
  
  #MulticastTTL 16
  
  #NoLoop
  
  #</stream>
  
  
  
  
  
  ##################################################################
  
  # Special streams
  
  
  
  # Server status
  
  
  
  <stream>
  
  Format status
  
  
  
  # Only allow local people to get the status
  
  ACL allow localhost
  
  ACL allow 192.168.0.0 192.168.255.255
  
  
  
  #FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
  
  </stream>
  
  
  
  
  
  # Redirect index.html to the appropriate site
  
  
  
  <redirect>
  
  URL http://www.ffmpeg.org/
  
  </redirect>
  
  
  
  
  
  #http://www.ffmpeg.org/

  Any help is greatly appreciated, I will do my best draw a picture of the best answer based on their username.

• stream vlc playlist trhough ffmpeg to rtmp live streaming [on hold]

  24 février 2014, par TamilArivu

  i am just tried to stream my playlist mp4 file to my live stream. i am using play my playlist via vlc and also stream via vlc. i am using the following code

  vlc --playlist-autostart --loop  --playlist-tree http://xxxxx.com/test --sout '#transcode{vcodec=h264,vb=300,fps=25,scale=1,acodec=mp4a,ab=64,channels=2}:std{access=rtmp,mux=ffmpeg{mux=flv},dst=rtmp://xxxxx.com/xxx/xxx1}'

  the above code play the playlist file but the streaming is not work . when i am run this code in my ubuntu command prompt it's return the following error

  VLC media player 2.0.8 Twoflower (revision 2.0.8a-0-g68cf50b)
  
  [0x678d58] inhibit interface error: Failed to connect to the D-Bus session daemon: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
  
  [0x678d58] main interface error: no suitable interface module
  
  [0x678d58] main interface error: no suitable interface module
  
  [0x648108] main libvlc error: interface "globalhotkeys,none" initialization failed
  
  [0x648108] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
  
  [0x678d58] qt4 interface error: Could not connect to X server
  
  [0x678d58] skins2 interface error: cannot initialize OSFactory
  
  [0x678d58] [cli] lua interface: Listening on host "*console".
  
  VLC media player 2.0.8 Twoflower
  
  Command Line Interface initialized. Type `help' for help.
  
  > Using network protocols without global network initialization. Please use avformat_network_init(), this will become mandatory later.
  
  Using network protocols without global network initialization. Please use avformat_network_init(), this will become mandatory later.
  
  Using network protocols without global network initialization. Please use avformat_network_init(), this will become mandatory later.
  
  Using network protocols without global network initialization. Please use avformat_network_init(), this will become mandatory later.
  
  x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2
  
  x264 [info]: profile High, level 3.1
  
  x264 [info]: final ratefactor: 35.88
  
  x264 [info]: using SAR=109/160
  
  x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2
  
  x264 [info]: profile High, level 3.1
  
  [flv @ 0x7f6d09133500] Codec for stream 0 does not use global headers but container format requires global headers
  
  [flv @ 0x7f6d09133500] Codec for stream 1 does not use global headers but container format requires global headers
  
  [flv @ 0x7f6d09133500] Packets are not in the proper order with respect to DTS
  
  [0x7f6d08003808] avformat mux error: could not write frame (pts: 240002, dts: 40001) (pkt pts: 240, dts: 40) 

  how can i solve this problem

• avcodec/h264 : Disallow pps_id changing between slices

  3 février 2014, par Michael Niedermayer

  avcodec/h264 : Disallow pps_id changing between slices
  Such changes are forbidden in H.264 and lead to race conditions
  Fixes out of array read
  
  Fixes : signal_sigsegv_f9796a_1613_cov_3114610371_FM1_BT_B.h264
  
  Found-by : Mateusz "j00ru" Jurczyk and Gynvael Coldwind
  
  Signed-off-by : Michael Niedermayer <michaelni@gmx.at>
  

  • [DH] libavcodec/h264.c
  • [DH] libavcodec/h264.h