Recherche avancée

Sur d’autres sites (10225)

• Statically built FFMPEG binary segmentation fault

  12 février 2020, par stevendesu

  I want to create a custom build of FFMPEG which rips out everything except for the ability to transmux HLS videos to MP4, and I need this build to be 100% static with no external dependencies

  I tried using the following configuration :

  ./configure \
  
      --extra-cflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-cxxflags='-static -static-libstdc++ -static-libgcc' \
  
      --extra-ldflags='-static -static-libstdc++ -static-libgcc' \
  
      --pkg-config-flags='--static' \
  
      --enable-static \
  
      --disable-shared \
  
      --disable-runtime-cpudetect \
  
      --disable-autodetect \
  
      --disable-ffplay \
  
      --disable-ffprobe \
  
      --disable-doc \
  
      --disable-avdevice \
  
      --disable-swresample \
  
      --disable-swscale \
  
      --disable-postproc \
  
      --disable-pthreads \
  
      --disable-w32threads \
  
      --disable-os2threads \
  
      --enable-network \
  
      --disable-dct \
  
      --disable-dwt \
  
      --disable-error-resilience \
  
      --disable-lsp \
  
      --disable-lzo \
  
      --disable-mdct \
  
      --disable-rdft \
  
      --disable-fft \
  
      --disable-faan \
  
      --disable-pixelutils \
  
      --disable-encoders \
  
      --disable-decoders \
  
      --disable-hwaccels \
  
      --disable-muxers \
  
      --enable-muxer=mov \
  
      --enable-muxer=mp4 \
  
      --disable-demuxers \
  
      --enable-demuxer=hls \
  
      --enable-demuxer=mpegts \
  
      --enable-demuxer=h264 \
  
      --enable-demuxer=aac \
  
      --disable-parsers \
  
      --enable-parser=h264 \
  
      --enable-parser=aac \
  
      --disable-bsfs \
  
      --disable-protocols \
  
      --enable-protocol=tcp \
  
      --enable-protocol=tls \
  
      --enable-protocol=http \
  
      --enable-protocol=https \
  
      --enable-protocol=hls \
  
      --disable-indevs \
  
      --disable-outdevs \
  
      --disable-devices \
  
      --disable-filters \
  
      --disable-alsa \
  
      --disable-appkit \
  
      --disable-avfoundation \
  
      --disable-bzlib \
  
      --disable-coreimage \
  
      --disable-iconv \
  
      --disable-lzma \
  
      --enable-openssl \
  
      --disable-sndio \
  
      --disable-sdl2 \
  
      --disable-securetransport \
  
      --disable-xlib \
  
      --disable-zlib \
  
      --disable-amf \
  
      --disable-audiotoolbox \
  
      --disable-cuda-llvm \
  
      --disable-cuvid \
  
      --disable-d3d11va \
  
      --disable-dxva2 \
  
      --disable-ffnvcodec \
  
      --disable-nvdec \
  
      --disable-nvenc \
  
      --disable-v4l2-m2m \
  
      --disable-vaapi \
  
      --disable-vdpau \
  
      --disable-videotoolbox \
  
      --disable-debug

  This looked about like what I wanted :

  install prefix            /usr/local
  
  source path               .
  
  C compiler                gcc
  
  C library                 glibc
  
  ARCH                      x86 (generic)
  
  big-endian                no
  
  runtime cpu detection     no
  
  standalone assembly       yes
  
  x86 assembler             nasm
  
  MMX enabled               yes
  
  MMXEXT enabled            yes
  
  3DNow! enabled            yes
  
  3DNow! extended enabled   yes
  
  SSE enabled               yes
  
  SSSE3 enabled             yes
  
  AESNI enabled             yes
  
  AVX enabled               yes
  
  AVX2 enabled              yes
  
  AVX-512 enabled           yes
  
  XOP enabled               yes
  
  FMA3 enabled              yes
  
  FMA4 enabled              yes
  
  i686 features enabled     yes
  
  CMOV is fast              yes
  
  EBX available             yes
  
  EBP available             yes
  
  debug symbols             no
  
  strip symbols             yes
  
  optimize for size         no
  
  optimizations             yes
  
  static                    yes
  
  shared                    no
  
  postprocessing support    no
  
  network support           yes
  
  threading support         no
  
  safe bitstream reader     yes
  
  texi2html enabled         no
  
  perl enabled              yes
  
  pod2man enabled           yes
  
  makeinfo enabled          no
  
  makeinfo supports HTML    no
  
  
  
  External libraries:
  
  openssl
  
  
  
  External libraries providing hardware acceleration:
  
  
  
  Libraries:
  
  avcodec                 avfilter                avformat                avutil
  
  
  
  Programs:
  
  ffmpeg
  
  
  
  Enabled decoders:
  
  
  
  Enabled encoders:
  
  
  
  Enabled hwaccels:
  
  
  
  Enabled parsers:
  
  aac                     h264
  
  
  
  Enabled demuxers:
  
  aac                     h264                    hls                     mpegts
  
  
  
  Enabled muxers:
  
  mov                     mp4
  
  
  
  Enabled protocols:
  
  hls                     http                    https                   tcp                     tls
  
  
  
  Enabled filters:
  
  aformat                 anull                   atrim                   format                  hflip                   null                    transpose               trim                    vflip
  
  
  
  Enabled bsfs:
  
  null
  
  
  
  Enabled indevs:
  
  
  
  Enabled outdevs:
  
  
  
  License: LGPL version 2.1 or later

  It included several filters which I won’t ever need or use, but these filters are pulled in automatically if you don’t specify --disable-avfilter, and specifying --disable-avfilter prevents the ffmpeg binary from being produced. So I’m stuck with those.

  Using these parameters and then running make, I received a binary that was about 5.9 MB in size and looked right :

  $> ldd ffmpeg
  
          not a dynamic executable

  But when I try to run it :

  $> ./ffmpeg -version
  
  Segmentation fault

  Using valgrind to try and inspect the cause of the segmentation fault :

  $> valgrind ./ffmpeg -version
  
  .... lots of stuff ...
  
  ==61362== Jump to the invalid address stated on the next line
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==  Address 0x0 is not stack'd, malloc'd or (recently) free'd
  
  ==61362==
  
  ==61362==
  
  ==61362== Process terminating with default action of signal 11 (SIGSEGV)
  
  ==61362==  Bad permissions for mapped region at address 0x0
  
  ==61362==    at 0x0: ???
  
  ==61362==    by 0x70BB1B: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x70B2E6: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x4033F9: ??? (in /src/FFmpeg/ffmpeg)
  
  ==61362==    by 0x1FFF000677: ???
  
  ==61362==
  
  ==61362== HEAP SUMMARY:
  
  ==61362==     in use at exit: 0 bytes in 0 blocks
  
  ==61362==   total heap usage: 0 allocs, 0 frees, 0 bytes allocated
  
  ==61362==
  
  ==61362== All heap blocks were freed -- no leaks are possible
  
  ==61362==
  
  ==61362== For counts of detected and suppressed errors, rerun with: -v
  
  ==61362== Use --track-origins=yes to see where uninitialised values come from
  
  ==61362== ERROR SUMMARY: 93 errors from 90 contexts (suppressed: 0 from 0)
  
  Segmentation fault

  Attempting to access memory at location 0x0 sounds like trying to follow a null pointer. But I’m not sure how to fix this.

  gdb backtrace

  When I first ran gdb ./ffmpeg gdb immediately gave me a segmentation fault and I wasn’t kicked into the gdb REPL, so I couldn’t investigate

  After rebuilding ffmpeg I was able to get in this time :

  $> gdb ./ffmpeg
  
  
  
  GNU gdb (Ubuntu 8.1-0ubuntu3.2) 8.1.0.20180409-git
  
  Copyright (C) 2018 Free Software Foundation, Inc.
  
  License GPLv3+: GNU GPL version 3 or later /gnu.org/licenses/gpl.html>
  
  This is free software: you are free to change and redistribute it.
  
  There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
  
  and "show warranty" for details.
  
  This GDB was configured as "x86_64-linux-gnu".
  
  Type "show configuration" for configuration details.
  
  For bug reporting instructions, please see:
  
  /www.gnu.org/software/gdb/bugs/>.
  
  Find the GDB manual and other documentation resources online at:
  
  /www.gnu.org/software/gdb/documentation/>.
  
  For help, type "help".
  
  Type "apropos word" to search for commands related to "word"...
  
  Reading symbols from ffmpeg...done.
  
  (gdb) r
  
  Starting program: /src/FFmpeg/ffmpeg
  
  warning: Error disabling address space randomization: Operation not permitted
  
  
  
  Program received signal SIGSEGV, Segmentation fault.
  
  0x0000000000000000 in ?? ()
  
  (gdb) bt
  
  #0  0x0000000000000000 in ?? ()
  
  #1  0x0000000000f9a8d5 in __register_frame_info_bases.part.6 ()
  
  #2  0x00000000004445fd in frame_dummy ()
  
  #3  0x0000000000000001 in ?? ()
  
  #4  0x0000000000ebd20c in __libc_csu_init ()
  
  #5  0x0000000000ebc9d7 in __libc_start_main ()
  
  #6  0x000000000044451a in _start ()
  
  (gdb)

  I tried grep’ing the code base for __register_frame_info_bases and found nothing. So I’m not really sure where to go from here

  A fix, but not an explanation

  By randomly removing configuration parameters and rebuilding I discovered that --disable-pthreads was causing the segmentation fault. When I remove this, ffmpeg runs just fine

  I don’t know why this is the case, though. Why would they make it possible to remove something that you need to run ?

• How Media Analytics for Piwik gives you the insights you need to measure how effective your video and audio marketing is – Part 1

  31 janvier 2017, par InnoCraft — Community

  Do you have video or audio content on your website or in your app ? If you answered this with yes, you should continue reading and learn everything about our Media Analytics premium feature.

  When you produce video or audio content, you are either spending money or time or often both money and time on your content in the hope of increasing conversions or sales. This means you have to know how your media is being used, when it is used, for how long and by whom. You can simply not afford not to know how this content affects your overall business goals as you are likely losing money and time by not making the most out of it. Would you be able to answer any of the above questions ? Do you know whether you can justify the cost and time for producing them, which videos work better than others and how they support your marketing strategy ? Luckily, getting all these insights is now so trivial it is almost a crime to not measure it.

  Getting Media Analytics and Installation

  Media Analytics can be purchased from the Piwik Marketplace where you find all sorts of free plugins as well as several premium features such as A/B Testing or Funnel. After the purchase you will receive a license key that you can enter in your Piwik to install and update the plugin with just one click.

  The feature will in most cases automatically start tracking your media content and you don’t even need to change the tracking code on your website. Currently supported players are for example YouTube, Vimeo, HTML 5, JW Player, VideoJS and many more players. You can also easily extend it by adding a custom media player or simply by letting us know which player you use and we will add support for it for you.

  By activating this feature, you get more than 15 new media reports, even more exportable widgets, new segments, APIs, and more. We will cover some of those features in this blog post and in part 2. For a full list of features check out the Media Analytics page on the Piwik Marketplace.

  Media Overview

  As the name says, it gives you an overview over your media usage and how it performs over time. You can choose any media metrics in the big evolution graph and the sparklines below give you an overview over all important metrics in a glance.

  

  It lets you for example see how often media was shown to your users, how often users start playing your media, for how long they watched it, how often they finished it, and more. If you see some spikes there, you should definitely have a deeper look at the other reports. When you hover a metric, it will show you a tooltip explaining how the data for this is collected and what it means.

  Real-Time Media

  On the Real-Time page you can see how your content is being used by your visitors right now, for example within the last 30 minutes, last 60 minutes and last 24 hours.

  It shows you how many plays you had in the last minutes, for how long they played it, and it shows you currently most popular media titles. This is great to discover which media content performs best right now and lets you make decisions based on user behaviour that is happening right now.

  

  Below you can see our Audience Real-Time Map that shows you from where in the world your media is being played. A bigger circle indicates that a media play happened more recently and of course you can zoom in down to countries and regions.

  

  All the reports update every few seconds so you can always have a look at it and see in just a second how your content is doing and how certain marketing campaigns affect it. All these real-time reports can be also added as widgets to any of your Piwik Dashboards and they can be exported for example as an iframe.

  Video, Audio and Media Player reports

  Those reports come with so many features, we need a separate blog post and cover this in part 2.

  Events

  Media Analytics will automatically track events so you can see how often users pressed for example play or pause, how often they resumed a video and how often they finished a video. This helps you better understand how your media is being used.

  

  For example in the past we noticed a couple of videos with lots of pause and resume events. We then had a look at the Audience Log – which we will cover next – to better understand why visitors paused the videos so often. We then realized they did this especially for videos that were served from a specific server and because the videos were loading so slow, users often pressed pause to let the media buffer, then played the media for a few seconds and then paused it again as they had to wait for the video to load. Moving those videos to another, faster server showed us immediate results in the number of pauses going down and on average visitors watched the videos for much longer.

  Audience Log

  At InnoCraft, we understand that not only aggregated metrics matter but also that you often need the ability to dig into your data and “debug” certain behaviours to understand the cause for some unusual high or low metrics. For example you may find out that many of your users often pause a video, then you wonder how each individual user behaved so you can better understand the why.

  

  The audience log shows you a detailed log of every visitor. You can chronologically see every action a visitor has performed during their whole visit. If you click on the visitor profile link, you can even see all visits of a specific visitor, and all actions they have ever performed on your website.

  This lets you ultimately debug and understand your visitors and see exactly which actions they performed before playing your media, which media they played, how they played your media, and how they behaved after playing your media.

  The visitor log of course also shows important information about each visitor like where they came from (referrer), their location, software, device and much more information.

  Audience Map

  The Audience Map is similar to the Real-Time Map but it shows you the locations of your visitors based on a selected date range and not in real time. The darker the blue, the more visitors from that country, region or city have interacted with your media.

  

  Coming in part 2

  In the next part we will cover which video, audio and media player reports Media Analytics provides, how segmenting gives you insights into different personas, and how nicely it integrates into Piwik.

  How to get Media Analytics and related features

  You can get Media Analytics on the Piwik Marketplace. If you want to learn more about this feature, you might be also interested in the Media Analytics User Guide and the Media Analytics FAQ.

• Piwik Analytics and becoming a Piwik Certified Professional

  10 juillet 2017, par Piwik Core Team — About

  Digital Analytics software

  Piwik Analytics is the leading open source digital analytics software, offering users around the world an opportunity to liberate their analytics. Most recently, they have introduced the Piwik Certified Professional certification exam which now allows users to become qualified in Piwik Analytics software on an individual level to gain a deeper understanding of Piwik. In this blog post I will guide you through the topics that are covered during the exam and provide you with advice on taking the official Piwik Certified Professional exam.

  

  Piwik certification exam

  Taking the exam will cost you a maximum investment of 60 minutes of your time, besides learning all materials of course. The exam consists of 55 multiple choice questions with four answers to choose from. The score needed to pass is 80% (44 questions answered correctly) and the cost is 50 USD total. An earned certificate is valid for 18 months, before these eighteen months are over a person should pass the exam again in order to retain the certified status.

  Learning topics

  The exam consists of two sections. The main section is focused on the Piwik Analytics software itself while the second part relates to digital analytics in general. All topics and content covered about Piwik Analytics is available through the official Piwik user guides. The second section tests your experience as a digital analyst, online marketer or any other function title in which you work with Piwik Analytics. In this case, the general digital analytics questions should be quite straightforward and easy to answer, and cover only a fraction of the total questions in the exam (around 10% with 5-7 general questions). An outline of all exam topics are listed below :

  • A Tour of Piwik
  • Track Goals and Measure Conversions
  • Event Tracking
  • Content Tracking
  • Ecommerce Analytics
  • Row Evolution – View and compare historical data
  • Segmentation – Compare segments of visitors
  • Visitors Maps – World, region, city
  • Real Time Visitor World Map
  • Real Time Analytics
  • The Visitor Profile
  • Site speed and Page speed
  • Site Search Tracking and Reporting
    
  • Transitions – Analyze the previous and following actions of your visitors for each page
  • Page Overlay
  • Custom Variables Analytics
  • Custom Dimensions
  • User ID
  • Annotating your data
  • Tracking Campaigns
  • URL Builder for Marketing Campaign Tracking

  The best way to prepare for the exam is read the entire Piwik user guides. You should definitely read the “Analytics Features” section since most questions of the Piwik Certified Professional – Digital Analytics exam that will be asked come from these sections. Furthermore you should be able to find your way around in Piwik at a basic level which means you know what the reports mean and where to find certain information. In addition, some basic knowledge regarding the settings is useful too. The exam is definitely not a technical implementation exam so no coding knowledge or any other deeply technical knowledge regarding Piwik is required.

  Finally, some general questions will be asked regarding digital analytics covering topics about KPI’s and the role of the analyst within an organization. While Piwik provides some links to articles by Avinash Kaushik covering these topics, you will not be able to learn these topics just by reading. When you have some experience with digital analytics you should be able to answer these general digital analytics questions with common sense and (even basic) experience as a digital analyst, analytics consultant, online marketer or any other related job whereby you work with Piwik.

  Taking the exam

  With 55 questions to be answered in 60 minutes the key to passing the exam is to keep moving. You have about 1 minute and 5 seconds to answer each question. This means that you should focus on the easiest questions first and return later to the questions that are a bit more challenging to answer. Keep an eye on the timer that will be displayed in the exam window. When the time expires or you click ‘Finish test’ your exam will end and be automatically submitted for review. Remember to first check all questions and answers before you click on the ‘Finish test’ button. If you click too soon and you still haven’t answered all questions, all unanswered questions will be marked as incorrect.

  During the test, no hard copy or online materials may be referenced. As you can imagine, it is almost impossible to check if users reference these kind of materials. However, be aware of the penalty system that is in place during the test. When a user leaves from the active test screen to another screen (i.e. a different browser tab) the screen turns red and provides a warning count when the user returns to the test screen again. You will have three warnings, after this your test will be submitted and graded as false. Furthermore, keep in mind you will have to do the test in one go and cannot pause and come back another time.

  Practice makes perfect

  Below I have included some example questions that could be asked during the exam. These questions do not necessarily represent how Piwik will test you on these topics.

  • What is the default report date that is selected by Piwik ?
  • Why would someone flatten a report in Piwik ?
  • Why would a user especially use the Page Overlay report ?
  • What are the three main Ecommerce interactions tracked with Piwik ?
  • What is an example of an anonymized IP address in Piwik ?

  Passing the Piwik Certified Professional – Digital Analytics exam

  Directly after submitting the exam you will receive a notification telling you whether or not you have passed the exam. If you pass, you will be able to download your personal certification right away. A report of your exam performance will also be available. This report lists the amount of correct answers and total questions by topic. The report with your exam performance is also available if you did not pass the exam. The certificate is valid for 18 months from the date of successful completion.

  Sometimes the difference between passing and failing can be a matter of how you interpret some of Piwik’s questions. There are several tricky questions included, so be sure to pay attention to detail on every question. If you fail, you may take the exam again. You will have to pay the 50 USD fee for each try, so do your best to pass it the first time.

  → Register to become a Piwik Certified Professional.

  We wish you the best of luck and happy analytics !