Advanced search

On other websites (10168)

• distorted video during ffmpeg h264 video with audio recording

  16 March 2018, by Developer

  I am continuously recording a video with audio from an ip camera using ffmpeg. I am getting a distorted video when I get in to the picture. If the background is still, the video looks normal, but as soon as I step in to the picture, I see myself only being distorted while the background stays intact. If anyone went through this issue, I would really appreciate your help. Here is a command that I am using:

  ffmpeg -i rtsp://admin:admin@192.168.1.9/mpeg4 -map 0 -c:v libx264 -c:a aac -pix_fmt yuv420p -f segment -segment_time 60 -segment_wrap 10 -reset_timestamps 1 %d.mp4

  This is a ffmpeg command output:

  ffmpeg version 3.4.1 Copyright (c) 2000-2017 the FFmpeg developers
  
  
  
  built with Apple LLVM version 9.0.0 (clang-900.0.39.2)
  
  
  
   configuration: --prefix=/usr/local/Cellar/ffmpeg/3.4.1 --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-gpl --enable-libass --enable-libfdk-aac --enable-libfontconfig --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-opencl --enable-videotoolbox --disable-lzma --enable-nonfree
  
  
  
  libavutil      55. 78.100 / 55. 78.100
  
  
  
  libavcodec     57.107.100 / 57.107.100
  
  
  
  libavformat    57. 83.100 / 57. 83.100
  
  
  
  libavdevice    57. 10.100 / 57. 10.100
  
  
  
  libavfilter     6.107.100 /  6.107.100
  
  
  
  libavresample   3.  7.  0 /  3.  7.  0
  
  
  
  libswscale      4.  8.100 /  4.  8.100
  
  
  
  libswresample   2.  9.100 /  2.  9.100
  
  
  
  libpostproc    54.  7.100 / 54.  7.100

  Guessed Channel Layout for Input Stream #0.1 : mono

  Input #0, rtsp, from 'rtsp://admin:admin@192.168.1.9/mpeg4':

  Metadata:

  title           : My MPEG4 Session
  
  
  
  comment         : My MPEG4 info

  Duration: N/A, start: 0.000000, bitrate: N/A

  Stream #0:0: Video: mpeg4 (Simple Profile), yuv420p, 640x480 [SAR 1:1 DAR 4:3], 30 tbr, 90k tbn, 30k tbc
  
  
  
  Stream #0:1: Audio: pcm_mulaw, 8000 Hz, mono, s16, 64 kb/s

  Stream mapping:

  Stream #0:0 -> #0:0 (mpeg4 (native) -> h264 (libx264))
  
  
  
  Stream #0:1 -> #0:1 (pcm_mulaw (native) -> aac (native))
  
  
  
  Press [q] to stop, [?] for help
  
  
  
  [aac @ 0x7fc303000600] Too many bits 8832.000000 > 6144 per frame requested, clamping to max
  
  
  
  [libx264 @ 0x7fc301846800] using SAR=1/1
  
  
  
  [libx264 @ 0x7fc301846800] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX
  
  
  
  [libx264 @ 0x7fc301846800] profile High, level 3.0
  
  
  
  [libx264 @ 0x7fc301846800] 264 - core 148 r2795 aaa9aa8 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  
  
  [segment @ 0x7fc301844400] Opening '0.mp4' for writing

  Output #0, segment, to ’%d.mp4’:

  Metadata:

  title           : My MPEG4 Session
  
  
  
  comment         : My MPEG4 info
  
  
  
  encoder         : Lavf57.83.100
  
  
  
  Stream #0:0: Video: h264 (libx264), yuv420p, 640x480 [SAR 1:1 DAR 4:3], q=-1--1, 30 fps, 15360 tbn, 30 tbc
  
  
  
  Metadata:
  
  
  
    encoder         : Lavc57.107.100 libx264
  
  
  
  Side data:
  
  
  
    cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
  
  
  Stream #0:1: Audio: aac (LC), 8000 Hz, mono, fltp, 48 kb/s
  
  
  
  Metadata:
  
  
  
    encoder         : Lavc57.107.100 aac
  
  
  
  frame=   57 fps=0.0 q=29.0 size=N/A time=00:00:02.04 bitrate=N/A dup=22 drop=0 sframe=   73 fps= 68 q=29.0 size=N/A time=00:00:02.56 bitrate=N/A dup=22 drop=0 s
  
  
  
  frame=   89 fps= 54 q=29.0 size=N/A time=00:00:03.07 bitrate=N/A dup=22 drop=0 sframe=  106 fps= 48 q=29.0 size=N/A time=00:00:03.58 bitrate=N/A dup=22 drop=0 s
  
  
  
  frame=  122 fps= 45 q=29.0 size=N/A time=00:00:04.09 bitrate=N/A dup=22 drop=0 sframe=  137 fps= 42 q=29.0 size=N/A time=00:00:04.48 bitrate=N/A dup=22 drop=0 s
  
  
  
  frame=  151 fps= 40 q=29.0 size=N/A time=00:00:04.97 bitrate=N/A dup=22 drop=0 s
  
  
  
  frame=  156 fps= 37 q=-1.0 Lsize=N/A time=00:00:05.48 bitrate=N/A dup=22 drop=0 speed= 1.3x  

  Update: It works fine in vlc player. I am adding a link to the destorted video: https://drive.google.com/file/d/1QCc7XUbePBI3v1h0sNQgU0guHA2AwgRT/view?usp=sharing

• FFMPEG problems with real-time buffer

  27 June 2024, by Charles Kiel

  I'm trying to use FFMPEG (Windows) to encode a stream from a video capture card via dshow and send to a RTMP server. THis is my command line;

  



      ffmpeg -f dshow -i video="AVerMedia BDA Analog Capture Secondary":audio="Microphone (6- C-Media USB Audi" -vf scale=1280:720 -vcodec libx264 -r 30 -rtbufsize 702000k -acodec mp3 -ac 2 -ar 44100 -ab 128k -pix_fmt yuv420p -tune zerolatency -preset ultrafast -f flv "rtmp://xxx.xxx.xxx.xxx/stream/key"        ffmpeg version N-86950-g1bef008 Copyright (c) 2000-2017 the FFmpeg developers
    built with gcc 7.1.0 (GCC)
    configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable
    -libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspe
    ex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
    libavutil      55. 70.100 / 55. 70.100
    libavcodec     57.102.100 / 57.102.100
    libavformat    57. 76.100 / 57. 76.100
    libavdevice    57.  7.100 / 57.  7.100
    libavfilter     6. 98.100 /  6. 98.100
    libswscale      4.  7.102 /  4.  7.102
    libswresample   2.  8.100 /  2.  8.100
    libpostproc    54.  6.100 / 54.  6.100
    Guessed Channel Layout for Input Stream #0.1 : stereo
    Input #0, dshow, from 'video=AVerMedia BDA Analog Capture Secondary:audio=Microphone (6- C-Media USB Audi':
    Duration: N/A, start: 2035.202000, bitrate: N/A
    Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 720x480, 29.97 fps, 29.97 tbr, 10000k tbn, 10000k tbc
    Stream #0:1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (68% of size: 3041280 [rtbufsize parameter])! frame dropped!
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (90% of size: 3041280 [rtbufsize parameter])! frame dropped!
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (113% of size: 3041280 [rtbufsize parameter])! frame dropped!
    Last message repeated 46 times
    Stream mapping:
    Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
    Stream #0:1 -> #0:1 (pcm_s16le (native) -> mp3 (libmp3lame))
    Press [q] to stop, [?] for help
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (113% of size: 3041280 [rtbufsize parameter])! frame dropped!
    [libx264 @ 0000000005b16640] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0000000005b16640] profile Constrained Baseline, level 3.1
    [libx264 @ 0000000005b16640] 264 - core 152 r2851 ba24899 - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=2
    1,11 fast_pskip=1 chroma_qp_offset=0 threads=11 lookahead_threads=11 sliced_threads=1 slices=11 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ra
    tio=1.40 aq=0
    [dshow @ 00000000005f90e0] real-time buffer [AVerMedia BDA Analog Capture Secondary] [video input] too full or near too full (113% of size: 3041280 [rtbufsize parameter])! frame dropped!
    Past duration 0.999992 too large


  



  The buffer too full message are non-stop. I can use Open Broadcast Software (OBS) and stream with no problem (I'm pretty sure it also uses ffmpeg), so I'm doing something wrong.

  


• FFmpeg: no image is displayed when broadcasting flv made of speex / mellymoser and libx264

  15 September 2013, by wvxvw

  ffmpeg -f alsa -i hw:PCH,0 -f x11grab -s 1920x1200 -r 15 -i :0.0 \
  
      -acodec nellymoser -ar 22050 -ac 1 -audio_preload 1000000 -vcodec libx264 \
  
      -preset fast -pix_fmt yuv420p -s 1280x800 -maxrate 1000k -threads 0 -f flv "$URL"

  This is the command I'm using, but I don't get any visible output, only sound. FFmpeg gives no warnings. What am I doing wrong?

  ---

  If I remove -audio_preload, the streaming works, but the audio comes with increasing delay (grows about a minute every minute).

  ---

  The output, as per request:

  ffmpeg version 1.0.7 Copyright (c) 2000-2013 the FFmpeg developers
  
    built on May 14 2013 21:59:35 with gcc 4.7.2 (GCC) 20121109 (Red Hat 4.7.2-8)
  
    configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --optflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --disable-crystalhd --enable-frei0r --enable-gnutls --enable-libass --enable-libcdio --enable-libcelt --enable-libdc1394 --disable-indev=jack --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-openal --enable-libopencv --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect
  
    libavutil      51. 73.101 / 51. 73.101
  
    libavcodec     54. 59.100 / 54. 59.100
  
    libavformat    54. 29.104 / 54. 29.104
  
    libavdevice    54.  2.101 / 54.  2.101
  
    libavfilter     3. 17.100 /  3. 17.100
  
    libswscale      2.  1.101 /  2.  1.101
  
    libswresample   0. 15.100 /  0. 15.100
  
    libpostproc    52.  0.100 / 52.  0.100
  
  [alsa @ 0xc5e8e0] Estimating duration from bitrate, this may be inaccurate
  
  Guessed Channel Layout for  Input Stream #0.0 : stereo
  
  Input #0, alsa, from 'hw:PCH,0':
  
    Duration: N/A, start: 1379234523.677560, bitrate: 1536 kb/s
  
      Stream #0:0: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s
  
  [x11grab @ 0xc6cda0] device: :0.0 -> display: :0.0 x: 0 y: 0 width: 1920 height: 1200
  
  [x11grab @ 0xc6cda0] shared memory extension found
  
  [x11grab @ 0xc6cda0] Estimating duration from bitrate, this may be inaccurate
  
  Input #1, x11grab, from ':0.0':
  
    Duration: N/A, start: 1379234523.843273, bitrate: 1105920 kb/s
  
      Stream #1:0: Video: rawvideo (BGR[0] / 0x524742), bgr0, 1920x1200, 1105920 kb/s, 15 tbr, 1000k tbn, 15 tbc
  
  [libx264 @ 0xc59e00] VBV maxrate specified, but no bufsize, ignored
  
  [libx264 @ 0xc59e00] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 AVX
  
  [libx264 @ 0xc59e00] profile High, level 3.2
  
  [libx264 @ 0xc59e00] 264 - core 128 r2223 f6a8615 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=1 keyint=250 keyint_min=15 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  Output #0, flv, to 'rtmp://live.justin.tv/app/live_key':
  
    Metadata:
  
      encoder         : Lavf54.29.104
  
      Stream #0:0: Video: h264 ([7][0][0][0] / 0x0007), yuv420p, 1280x800, q=-1--1, 1k tbn, 15 tbc
  
      Stream #0:1: Audio: nellymoser ([6][0][0][0] / 0x0006), 22050 Hz, mono, flt, 128 kb/s
  
  Stream mapping:
  
    Stream #1:0 -> #0:0 (rawvideo -> libx264)
  
    Stream #0:0 -> #0:1 (pcm_s16le -> nellymoser)
  
  Press [q] to stop, [?] for help
  
  [alsa @ 0xc5e8e0] ALSA buffer xrun.