Recherche avancée

Sur d’autres sites (10048)

• What ffmpeg command line will list the key frames ?

  21 décembre 2019, par ChrisJJ

  What ffmpeg command line will list the index numbers of the key frames in an existing .MP4 to stdout ?

  I’ve tried the only applicable answer at https://superuser.com/questions/885452/extracting-the-index-of-key-frames-from-a-video-using-ffmpeg to no avail.

• send h264 video to nginx-rtmp server using ffmpeg API

  11 décembre 2019, par Glen

  I have C++ code that grabs frames from a GigE camera and writes them out to a file. I’m using the libx264 codec and ffmpeg version 4.0.

  Writing to the file works fine, however I would also like to send the video to nginx configured with the nginx-rtmp plug-in to make the video available live via HLS.

  I can use the ffmpeg command line program to stream one of my previously captured files to my nginx server and rebroadcast as HLS, however if I try to stream from my C++ code the nginx server closes the connection after one or two frames are sent.

  To test further, I used the ffmpeg command line program to receive a rtmp stream and write it out to a file. I am able to send video to ffmpeg from my C++ program with rtmp, however every frame generates a warning like this :

  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1771, current: 53; changing to 1772. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1772, current: 53; changing to 1773. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1773, current: 53; changing to 1774. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1774, current: 53; changing to 1775. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1775, current: 53; changing to 1776. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1776, current: 53; changing to 1777. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1777, current: 53; changing to 1778. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1778, current: 53; changing to 1779. This may result in incorrect timestamps in the output file.
  
  [avi @ 0x1b6b6f0] Non-monotonous DTS in output stream 0:0; previous: 1779, current: 53; changing to 1780. This may result in incorrect timestamps in the output file.

  I printed PTS and DTS for my packet before writing it, and the numbers were monotonous (for example, in this last frame the pts and dts printed from my code were 1780, not the ’current : 53’ that ffmpeg reports>

  also, unless I tell ffmpeg what the output framerate should be I end up with a file that plays 2x speed.

  After ffmpeg receives the rtmp stream and writes it to the file, I am then able to successfully send that file to my nginx server using ffmpeg.

  here is some relevant code :

  //configuring the codec context
  
  // make sure that config.codec is something we support
  
  // for now we are only supporting LIBX264
  
  if (config.codec() != codecs::LIBX264) {
  
      throw std::invalid_argument("currently only libx264 codec is supported");
  
  }
  
  
  
  // lookup specified codec
  
  ffcodec_ = avcodec_find_encoder_by_name(config.codec().c_str());
  
  if (!ffcodec_) {
  
      throw std::invalid_argument("unable to get codec " + config.codec());
  
  }
  
  
  
  // unique_ptr to manage the codec_context
  
  codec_context_ = av_pointer::codec_context(avcodec_alloc_context3(ffcodec_));
  
  
  
  if (!codec_context_) {
  
      throw std::runtime_error("unable to initialize AVCodecContext");
  
  }
  
  
  
  // setup codec_context_
  
  codec_context_->width = frame_width;
  
  codec_context_->height = frame_height;
  
  codec_context_->time_base = (AVRational){1, config.target_fps()};
  
  codec_context_->framerate = (AVRational){config.target_fps(), 1};
  
  codec_context_->global_quality = 0;
  
  codec_context_->compression_level = 0;
  
  codec_context_->bits_per_raw_sample = 8;
  
  codec_context_->gop_size = 1;
  
  codec_context_->max_b_frames = 1;
  
  codec_context_->pix_fmt = AV_PIX_FMT_YUV420P;
  
  
  
  // x264 only settings
  
  if (config.codec() == codecs::LIBX264) {
  
      av_opt_set(codec_context_->priv_data, "preset", config.compression_target().c_str(), 0);
  
      av_opt_set(codec_context_->priv_data, "crf", std::to_string(config.crf()).c_str(), 0);
  
  }
  
  
  
  // Open up the codec
  
  if (avcodec_open2(codec_context_.get(), ffcodec_, NULL) < 0) {
  
      throw std::runtime_error("unable to open ffmpeg codec");
  
  }
  
  
  
  // setup the output format context and stream for RTMP
  
  AVFormatContext *tmp_f_context;
  
  avformat_alloc_output_context2(&tmp_f_context, NULL, "flv", uri.c_str());
  
  rtmp_format_context_ = av_pointer::format_context(tmp_f_context);
  
  rtmp_stream_ = avformat_new_stream(rtmp_format_context_.get(), ffcodec_);
  
  avcodec_parameters_from_context(rtmp_stream_->codecpar, codec_context_.get());
  
  rtmp_stream_->time_base = codec_context_->time_base;
  
  rtmp_stream_->r_frame_rate = codec_context_->framerate;
  
  
  
  /* open the output file */
  
  if (!(rtmp_format_context_->flags & AVFMT_NOFILE)) {
  
      int r = avio_open(&rtmp_format_context_->pb, uri.c_str(), AVIO_FLAG_WRITE);
  
      if (r < 0) {
  
          throw std::runtime_error("unable to open " + uri + " : " + av_err2str(r));
  
      }
  
  }
  
  
  
  if (avformat_write_header(rtmp_format_context_.get(), NULL) < 0) {
  
      throw std::runtime_error("unable to write header");
  
  }
  
  
  
  av_dump_format(rtmp_format_context_.get(), 0,uri.c_str() , 1);

  at this point the av_dump_format produces this output :

  Output #0, flv, to 'rtmp://[MY URI]':
  
    Metadata:
  
      encoder         : Lavf58.12.100
  
      Stream #0:0, 0, 1/1000: Video: h264 (libx264), 1 reference frame ([7][0][0][0] / 0x0007), yuv420p, 800x800 (0x0), 0/1, q=-1--1, 30 tbr, 1k tbn

  encoding and writing the frame :

  // send the frame to the encoder, filtering first if necessary
  
  void VideoWriter::Encode(AVFrame *frame)
  
  {
  
      int rval;
  
      if (!apply_filter_) {
  
          //send frame to encoder
  
          rval = avcodec_send_frame(codec_context_.get(), frame);
  
          if (rval < 0) {
  
              throw std::runtime_error("error sending frame for encoding");
  
          }
  
      } else {
  
          // push frame to filter 
  
          // REMOVED, currently testing without filtering
  
      }
  
  
  
      // get packets from encoder
  
      while (rval >= 0) {
  
          // create smart pointer to allocated packet
  
          av_pointer::packet pkt(av_packet_alloc());
  
          if (!pkt) {
  
              throw std::runtime_error("unable to allocate packet");
  
          }
  
  
  
          rval = avcodec_receive_packet(codec_context_.get(), pkt.get());
  
          if (rval == AVERROR(EAGAIN) || rval == AVERROR_EOF) {
  
              return;
  
          } else if (rval < 0) {
  
              throw std::runtime_error("error during encoding");
  
          }
  
  
  
          // if I print pkt->pts and pkt->dts here, I see sequential numbers
  
  
  
          // write packet
  
          rval = av_interleaved_write_frame(rtmp_format_context_.get(), pkt.get());
  
          if (rval < 0 ) {
  
              std::cerr << av_err2str(rval) << std::endl;
  
          }
  
      }
  
  }

  Since I am able to send video from a previously recorded file to nginx with the ffmpeg command line program, I believe the problem is in my code and not my nginx configuration.

  EDIT : I think it may have to do with SPS/PPS as I see a bunch of these error messages in the nginx log before it closes the stream

  2019/12/11 11:11:31 [error] 10180#0: *4 hls: failed to read 5 byte(s), client: XXX, server: 0.0.0.0:1935
  
  2019/12/11 11:11:31 [error] 10180#0: *4 hls: error appenging SPS/PPS NALs, client: XXX, server: 0.0.0.0:1935

  As I mentioned, this code works fine if I set it up to write to an avi file rather stream to rtmp, and I can stream to ffmpeg listening for rtmp but with lots of warnings about the DTS but if I try to send to nginx, it closes the connection almost immediately. My first thought was that there was something wrong with the frame timestamps, but when I print pts and dts prior to writing the packet to the stream they look okay to me.

  My end goal is to capture video to a file, and also be able to turn on the rtmp stream on demand — but for now I’m just trying to get the rtmp stream working continuously (without writing to a file)

  Thanks for any insights.

• Returned non-zero exit status 1 / error code 1 : b''

  26 août 2015, par pufAmuf

  I’m trying to extract the video height via ffprobe into python, however I am having issues (with some videos).

  Here is my ffprobe command : ffprobe -v quiet -print_format compact=print_section=0:nokey=1:escape=csv -show_entries stream=height "some video here(bla)_25.mp4"

  It returns something like this

  720
  
  (empty-line)
  
  N/A

  Here is the code I used to extract the output for later processing :

  executecommand = 'ffprobe -v quiet -print_format compact=print_section=0:nokey=1:escape=csv -show_entries stream=height "' + CurrentVideoToBeProcessed + '"'
  
  
  
  VideoHeight = subprocess.check_output(executecommand)

  This is the error that came about :

  subprocess.CalledProcessError : Command ’...’ returned non-zero exit
  status 1

  So when I modified the code to this :

  try:
  
      VideoHeight = subprocess.check_output(executecommand,shell=True,stderr=subprocess.STDOUT)
  
  except subprocess.CalledProcessError as e:
  
      raise RuntimeError("command '{}' return with error (code {}): {}".format(e.cmd, e.returncode, e.output))

  This is the error I get :

  RuntimeError : command ’...’ return with error (code 1) : b’’

  I assumed at first the issue was with the file names, but certain videos work and certain don’t, irregardless of the file name.
  This is the output I get in python for videos that work :

  b’360\r\n\r\n’

  Any idea what’s going on ? Thanks !

  Edit
  It turns out the problem is in the file names after all. From what I gather so far at least, numbers in file-names seem to be causing the error.
  Edit2
  I re-ran the code after I closed several cmd instances and I am not getting the error anymore. I don’t know why. I am sure, however that if I were to convert hundreds of videos again I’ll get the error eventually as it has always happened eventually.