Recherche avancée

Sur d’autres sites (10844)

• ffmpeg filter_complex concat never completes

  10 juillet 2020, par seawolf

  I am trying to concatenate mp4 files into a single file. I am attempting to use the concat filter directly for reasons independent from this question (so -i list.txt is not a valid solution). All video files in question are between 4 and 20 minutes in length.

  


  What I am executing :

  


  % ffmpeg -i f01.mp4 -i f02.mp4 -filter_complex "[0:v][0:a][1:v][1:a]concat=n=2:v=1:a=1[v][a]" -map "[v]" -map "[a]" output.mp4


  


  This is my understanding of the form of this command from references such as FFmpeg Filters Documentation : concat and Concatenate Videos Together Using FFMPEG !.

  


  What happens :

  


  ffmpeg gives a lot of output as it checks the metadata for each stream and then begins processing. After a short duration (several seconds to a minute or so, seems to be prortional to the duration of the first video) I start seeing messages like this :

  


  More than 1000 frames duplicated
More than 10000 frames duplicated     512kB time=00:00:00.12 bitrate=32771.0kbits/s dup=33365 drop=0 speed=0.00449x
More than 100000 frames duplicated   1280kB time=00:00:00.17 bitrate=61442.1kbits/s dup=66730 drop=0 speed=0.00272x


  


  ... and then the process never completes. If I leave my computer running for 24 hours, ffmpeg is still using max available CPU (200-300%). The output file is 48 bytes in length.

  


  Note : the inputs are only a few minutes each, so individually re-encoding the inputs would take only a few minutes each.

  


  Note : if I change the command to use f01.mp4 for both source 0 and source 1, the command completes as expected in under 5 minutes :

  


  % # example that works:
% # note, however, that this just repeats the same source twice
% ffmpeg -i f01.mp4 -i f01.mp4 -filter_complex "[0:v][0:a][1:v][1:a]concat=n=2:v=1:a=1[v][a]" -map "[v]" -map "[a]" output.mp4


  


  Full output :

  


  Here is the complete output of a run in case it's helpful :

  


  % ffmpeg -i f01.mp4 -i f02.mp4 -filter_complex "[0:v][0:a][1:v][1:a]concat=n=2:v=1:a=1[v][a]" -map "[v]" -map "[a]" output.mp4
ffmpeg version 4.3 Copyright (c) 2000-2020 the FFmpeg developers
  built with Apple clang version 11.0.3 (clang-1103.0.32.62)
  configuration: --prefix=/usr/local/Cellar/ffmpeg/4.3_2 --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags= --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-libaom --enable-libbluray --enable-libdav1d --enable-libmp3lame --enable-libopus --enable-librav1e --enable-librubberband --enable-libsnappy --enable-libsrt --enable-libtesseract --enable-libtheora --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librtmp --enable-libspeex --enable-libsoxr --enable-videotoolbox --disable-libjack --disable-indev=jack
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  7.100 /  5.  7.100
  libswresample   3.  7.100 /  3.  7.100
  libpostproc    55.  7.100 / 55.  7.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'f01.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-06-04T21:34:26.000000Z
    encoder         : HandBrake 1.3.2 2020050300
  Duration: 00:04:14.66, start: 0.000000, bitrate: 525 kb/s
    Stream #0:0(und): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 708x478 [SAR 8:9 DAR 944:717], 366 kb/s, 29.97 fps, 29.97 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-06-04T21:34:26.000000Z
      handler_name    : VideoHandler
    Stream #0:1(jpn): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 149 kb/s (default)
    Metadata:
      creation_time   : 2020-06-04T21:34:26.000000Z
      handler_name    : Stereo
Input #1, mov,mp4,m4a,3gp,3g2,mj2, from 'f02.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-06-04T21:38:15.000000Z
    encoder         : HandBrake 1.3.2 2020050300
  Duration: 00:06:30.95, start: 0.000000, bitrate: 1328 kb/s
    Stream #1:0(und): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 708x478 [SAR 8:9 DAR 944:717], 1179 kb/s, 29.97 fps, 30 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-06-04T21:38:15.000000Z
      handler_name    : VideoHandler
    Stream #1:1(jpn): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 140 kb/s (default)
    Metadata:
      creation_time   : 2020-06-04T21:38:15.000000Z
      handler_name    : Stereo
File 'output.mp4' already exists. Overwrite? [y/N] y
Stream mapping:
  Stream #0:0 (h264) -> concat:in0:v0
  Stream #0:1 (aac) -> concat:in0:a0
  Stream #1:0 (h264) -> concat:in1:v0
  Stream #1:1 (aac) -> concat:in1:a0
  concat:out:v0 -> Stream #0:0 (libx264)
  concat:out:a0 -> Stream #0:1 (aac)
Press [q] to stop, [?] for help
[mp4 @ 0x7ff130014000] Frame rate very high for a muxer not efficiently supporting it.
Please consider specifying a lower framerate, a different muxer or -vsync 2
[libx264 @ 0x7ff130021200] using SAR=8/9
[libx264 @ 0x7ff130021200] MB rate (1350000000) > level limit (16711680)
[libx264 @ 0x7ff130021200] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
[libx264 @ 0x7ff130021200] profile High, level 6.2, 4:2:0, 8-bit
[libx264 @ 0x7ff130021200] 264 - core 160 r3011 cde9a93 - H.264/MPEG-4 AVC codec - Copyleft 2003-2020 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, mp4, to 'output.mp4':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.45.100
    Stream #0:0: Video: h264 (libx264) (avc1 / 0x31637661), yuv420p(progressive), 708x478 [SAR 8:9 DAR 944:717], q=-1--1, 1000k tbn, 1000k tbc (default)
    Metadata:
      encoder         : Lavc58.91.100 libx264
    Side data:
      cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: N/A
    Stream #0:1: Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s (default)
    Metadata:
      encoder         : Lavc58.91.100 aac
More than 1000 frames duplicated
More than 10000 frames duplicated     512kB time=00:00:00.12 bitrate=32771.0kbits/s dup=33365 drop=0 speed=0.00449x
More than 100000 frames duplicated   1280kB time=00:00:00.17 bitrate=61442.1kbits/s dup=66730 drop=0 speed=0.00272x
frame=667333 fps=1079 q=33.0 size=   14848kB time=00:00:00.76 bitrate=158379.2kbits/s dup=667312 drop=0 speed=0.00124x


  


• Unable to load FFMPEG library "java.lang.UnsatisfiedLinkError : dlopen failed :"

  25 janvier 2020, par Vicky

  I am trying to build and run old ffmpeg project which, it was in eclipse and now i am trying to run it from Android studio, but app crash displaying below error.

  2020-01-25 11:57:52.621 26360-26360/org.lance.ffplayer E/AndroidRuntime: FATAL EXCEPTION: main
  
  Process: org.lance.ffplayer, PID: 26360
  
  java.lang.UnsatisfiedLinkError: dlopen failed: library "./obj/local/armeabi/libffmpeg.so" not found
  
      at java.lang.Runtime.loadLibrary0(Runtime.java:1016)
  
      at java.lang.System.loadLibrary(System.java:1669)
  
      at org.lance.ffplayer.FFmpeg.<clinit>(FFmpeg.java:17)
  
      at org.lance.ffplayer.FFmpeg.getInstance(FFmpeg.java:87)
  
      at org.lance.ffplayer.FileBrowser.<init>(FileBrowser.java:41)
  
      at org.lance.ffplayer.UIActivity.onCreate(UIActivity.java:39)
  
      at android.app.Activity.performCreate(Activity.java:7327)
  
      at android.app.Activity.performCreate(Activity.java:7318)
  
      at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1275)
  
      at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:3101)
  
      at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:3264)
  
      at android.app.servertransaction.LaunchActivityItem.execute(LaunchActivityItem.java:78)
  
      at android.app.servertransaction.TransactionExecutor.executeCallbacks(TransactionExecutor.java:108)
  
      at android.app.servertransaction.TransactionExecutor.execute(TransactionExecutor.java:68)
  
      at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1955)
  
      at android.os.Handler.dispatchMessage(Handler.java:106)
  
      at android.os.Looper.loop(Looper.java:214)
  
      at android.app.ActivityThread.main(ActivityThread.java:7078)
  
      at java.lang.reflect.Method.invoke(Native Method)
  
      at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run(RuntimeInit.java:494)
  
      at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:974)
  
  </init></clinit>

  Below are configuration of my project,

  Android studio configuration image link - 1

  Android studio configuration image link - 2

  I have spent my entire day to solve this issue but everything failed. Anybody has idea about what i am missing and doing wrong ?
  Thanks in advance.

• FFMPEG php HLS and DASH conversion

  21 juillet 2020, par Angus Simons

  I'm using this repo https://github.com/aminyazdanpanah/PHP-FFmpeg-video-streaming to encode video in hls and then reproduce on the front end.

  


  After creating all the hls segments correctly the php script fail to execute the command below.
The command getting error is the next one :

  


  '/usr/bin/ffmpeg' '-y' '-i' 'source.mp4' '-c:v' 'libx264' '-c:a' 'aac' '-bf' '1' '-keyint_min' '25' '-g' '250' '-sc_threshold' '40' '-use_timeline' '1' '-use_template' '1' '-init_seg_name' 'dash_init_$RepresentationID$.$ext$' '-media_seg_name' 'dash_chunk_$RepresentationID$_$Number%05d$.$ext$' '-seg_duration' '10' '-hls_playlist' '0' '-f' 'dash' '-adaptation_sets' 'id=0,streams=v id=1,streams=a' '-map' '0' '-s:v:0' '256x144' '-b:v:0' '830k' '-map' '0' '-s:v:1' '426x240' '-b:v:1' '969k' '-map' '0' '-s:v:2' '640x360' '-b:v:2' '1162k' '-map' '0' '-s:v:3' '854x480' '-b:v:3' '1453k' '-map' '0' '-s:v:4' '1280x720' '-b:v:4' '1938k' '-map' '0' '-s:v:5' '1920x1080' '-b:v:5' '2907k' '-strict' '-2' '-threads' '12' 'dash.mpd'


  


  Here there is the error printed executing the command with CLI :

  


      ffmpeg version 4.3-2~16.04.york1 Copyright (c) 2000-2020 the FFmpeg developers
    built with gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.12) 20160609
    configuration: --prefix=/usr --extra-version='2~16.04.york1' --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-pocketsphinx --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
    libavutil      56. 51.100 / 56. 51.100
    libavcodec     58. 91.100 / 58. 91.100
    libavformat    58. 45.100 / 58. 45.100
    libavdevice    58. 10.100 / 58. 10.100
    libavfilter     7. 85.100 /  7. 85.100
    libavresample   4.  0.  0 /  4.  0.  0
    libswscale      5.  7.100 /  5.  7.100
    libswresample   3.  7.100 /  3.  7.100
    libpostproc    55.  7.100 / 55.  7.100
    Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'source.mp4':
    Metadata:
        major_brand     : mp42
        minor_version   : 0
        compatible_brands: mp42mp41
        creation_time   : 2020-07-10T09:13:47.000000Z
    Duration: 01:03:27.36, start: 0.000000, bitrate: 3298 kb/s
        Stream #0:0(eng): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, bt709), 1920x1080, 2977 kb/s, 25 fps, 25 tbr, 25k tbn, 50 tbc (default)
        Metadata:
        creation_time   : 2020-07-10T09:13:47.000000Z
        handler_name    : ?Mainconcept Video Media Handler
        encoder         : AVC Coding
        Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 317 kb/s (default)
        Metadata:
        creation_time   : 2020-07-10T09:13:48.000000Z
        handler_name    : #Mainconcept MP4 Sound Media Handler
    Stream mapping:
    Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264))
    Stream #0:1 -> #0:1 (aac (native) -> aac (native))
    Stream #0:0 -> #0:2 (h264 (native) -> h264 (libx264))
    Stream #0:1 -> #0:3 (aac (native) -> aac (native))
    Stream #0:0 -> #0:4 (h264 (native) -> h264 (libx264))
    Stream #0:1 -> #0:5 (aac (native) -> aac (native))
    Stream #0:0 -> #0:6 (h264 (native) -> h264 (libx264))
    Stream #0:1 -> #0:7 (aac (native) -> aac (native))
    Stream #0:0 -> #0:8 (h264 (native) -> h264 (libx264))
    Stream #0:1 -> #0:9 (aac (native) -> aac (native))
    Stream #0:0 -> #0:10 (h264 (native) -> h264 (libx264))
    Stream #0:1 -> #0:11 (aac (native) -> aac (native))
    Press [q] to stop, [?] for help
    [libx264 @ 0x55de2d5e6c80] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0x55de2d5e6c80] profile High, level 2.0
    [libx264 @ 0x55de2d5e6c80] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=1 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=830 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    [libx264 @ 0x55de2d09fcc0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0x55de2d09fcc0] profile High, level 2.1
    [libx264 @ 0x55de2d09fcc0] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=1 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=969 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    [libx264 @ 0x55de2d0a4240] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0x55de2d0a4240] profile High, level 3.0
    [libx264 @ 0x55de2d0a4240] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=1 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=1162 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    [libx264 @ 0x55de2d0a8380] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0x55de2d0a8380] profile High, level 3.0
    [libx264 @ 0x55de2d0a8380] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=1 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=1453 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    [libx264 @ 0x55de2d085c80] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0x55de2d085c80] profile High, level 3.1
    [libx264 @ 0x55de2d085c80] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=1 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=1938 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    [libx264 @ 0x55de2d089d40] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
    [libx264 @ 0x55de2d089d40] profile High, level 4.0
    [libx264 @ 0x55de2d089d40] 264 - core 155 r2917 0a84d98 - H.264/MPEG-4 AVC codec - Copyleft 2003-2018 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=1 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=abr mbtree=1 bitrate=2907 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
    [dash @ 0x55de2cf50900] Opening 'dash_init_0.m4s' for writing
    [dash @ 0x55de2cf50900] Opening 'dash_init_1.m4s' for writing
    [dash @ 0x55de2cf50900] Opening 'dash_init_2.m4s' for writing
    [dash @ 0x55de2cf50900] Conflicting stream par values in Adaptation Set 1
    Could not write header for output file #0 (incorrect codec parameters ?): Invalid argument
    Error initializing output stream 0:10 -- 
    [libx264 @ 0x55de2d5e6c80] final ratefactor: 16.04
    [aac @ 0x55de2d09eb80] Qavg: 65536.000
    [aac @ 0x55de2d09eb80] 2 frames left in the queue on closing
    [libx264 @ 0x55de2d09fcc0] final ratefactor: 19.18
    [aac @ 0x55de2d0a2b00] Qavg: 65536.000
    [aac @ 0x55de2d0a2b00] 2 frames left in the queue on closing
    [libx264 @ 0x55de2d0a4240] final ratefactor: 21.16
    [aac @ 0x55de2d0a6c40] Qavg: 65536.000
    [aac @ 0x55de2d0a6c40] 2 frames left in the queue on closing
    [libx264 @ 0x55de2d0a8380] final ratefactor: 21.67
    [aac @ 0x55de2d084540] Qavg: 65536.000
    [aac @ 0x55de2d084540] 2 frames left in the queue on closing
    [libx264 @ 0x55de2d085c80] final ratefactor: 22.63
    [aac @ 0x55de2d088600] Qavg: 65536.000
    [aac @ 0x55de2d088600] 2 frames left in the queue on closing
    [libx264 @ 0x55de2d089d40] final ratefactor: 22.67
    [aac @ 0x55de2d08c5c0] Qavg: 65536.000
    [aac @ 0x55de2d08c5c0] 2 frames left in the queue on closing
    Conversion failed!


  


  I checked if I have MPEG DASH support enable and it is enabled in FFMPEG