Recherche avancée

Sur d’autres sites (15320)

• audio extracted from flv file via ffmpeg is of shorter duration than the actual flv video [closed]

  11 janvier 2013, par user1961143

  I have extracted audio from flv file via ffmpeg using this command :-

  ffmpeg -i 164_29.flv v19.mp3

  The flv videos duration is 3 minutes but the audio is of 2 mins 20 seconds only. On searching i found that the silent pieces of audio are removed when generating audio from ffmpeg. But i need the audio file to be of exactly same duration as flv video as later i need to put this audio in the flv video itself. Please help as this is urgent for our project. I am running the FFMpeg via .net windows service, so in case you know any other tool which can extract the audio of same duration as video and can be run via .net, it would be useful too.

  Console output :

  C :\Users\ritika.thakur>ffmpeg -i 164_29.flv v19.mp3
  ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers
  built on Nov 25 2012 12:23:20 with gcc 4.7.2 (GCC)
  configuration : —disable-static —enable-shared —enable-gpl —enable-version —disable-pthreads —enable-runtime-cpudetect —enable-avisynth —enable-bzlib —enable-frei0r —enable-libass —enable-libopencore-amrnb —enable-libopencore-amrwb —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libnut -enable-libopenjpeg —enable-libopus —enable-librtmp —enable-libschroedinger -enable-libspeex —enable-libtheora —enable-libutvideo —enable-libvo-aacenc —enable-libvo-amrwbenc —enable-libvorbis —enable-libvpx —enable-libx264 —enale-libxavs —enable-libxvid —enable-zlib
  libavutil 52. 9.100 / 52. 9.100
  libavcodec 54. 77.100 / 54. 77.100
  libavformat 54. 37.100 / 54. 37.100
  libavdevice 54. 3.100 / 54. 3.100
  libavfilter 3. 23.102 / 3. 23.102
  libswscale 2. 1.102 / 2. 1.102
  libswresample 0. 17.101 / 0. 17.101
  libpostproc 52. 2.100 / 52. 2.100
  Input #0, flv, from '164_29.flv' :
  Metadata :
  canSeekToEnd : false
  createdby : FMS 4.0
  creationdate : Tue Jan 08 00:26:19 2013
  Duration : 00:03:04.08, start : 0.000000, bitrate : 283
  kb/s
  Stream #0:0 : Video : flv1, yuv420p, 320x240, 1k tbr, 1k tbn, 1k tbc
  Stream #0:1 : Audio : nellymoser, 22050 Hz, mono, flt
  Output #0, mp3, to 'v19.mp3' :
  Metadata :
  canSeekToEnd : false
  createdby : FMS 4.0
  creationdate : Tue Jan 08 00:26:19 2013
  TSSE : Lavf54.37.100
  Stream #0:0 : Audio : mp3, 22050 Hz, mono, fltp
  Stream mapping :
  Stream #0:1 -> #0:0 (nellymoser -> libmp3lame)
  Press [q] to stop, [?] for help
  size= 567kB time=00:03:04.13 bitrate= 25.2kbits/s video:0kB audio:567kB subtitle:0 global headers:0kB muxing overhead 0.051503%

  This is the output of console for both video and audio file separately :-

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C :\Users\ritika.thakur>ffmpeg -i v19.mp3

  ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers
  built on Nov 25 2012 12:23:20 with gcc 4.7.2 (GCC)
  configuration : —disable-static —enable-shared —enable-gpl —enable-version3
  —disable-pthreads —enable-runtime-cpudetect —enable-avisynth —enable-bzlib
  — enable-frei0r —enable-libass —enable-libopencore-amrnb —enable-libopencore-
  amrwb —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libnut -
   enable-libopenjpeg —enable-libopus —enable-librtmp —enable-libschroedinger -
   enable-libspeex —enable-libtheora —enable-libutvideo —enable-libvo-aacenc —
  enable-libvo-amrwbenc —enable-libvorbis —enable-libvpx —enable-libx264 —enab
  le-libxavs —enable-libxvid —enable-zlib
  libavutil 52. 9.100 / 52. 9.100
  libavcodec 54. 77.100 / 54. 77.100
  libavformat 54. 37.100 / 54. 37.100
  libavdevice 54. 3.100 / 54. 3.100
  libavfilter 3. 23.102 / 3. 23.102
  libswscale 2. 1.102 / 2. 1.102
  libswresample 0. 17.101 / 0. 17.101
  libpostproc 52. 2.100 / 52. 2.100
  [mp3 @ 0056e780] max_analyze_duration 5000000 reached at 5015510
  Input #0, mp3, from 'v19.mp3' :
  Metadata :
  canSeekToEnd : false
  createdby : FMS 4.0
  creationdate : Tue Jan 08 00:26:19 2013
  encoder : Lavf54.37.100
  Duration : 00:02:25.14, start : 0.000000, bitrate : 32 kb/s
  Stream #0:0 : Audio : mp3, 22050 Hz, mono, s16, 32 kb/s
  At least one output file must be specified

  C :\Users\ritika.thakur>ffmpeg -i 164_29.flv

  ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers
  built on Nov 25 2012 12:23:20 with gcc 4.7.2 (GCC)
  configuration : —disable-static —enable-shared —enable-gpl —enable-version3
  —disable-pthreads —enable-runtime-cpudetect —enable-avisynth —enable-bzlib
  — enable-frei0r —enable-libass —enable-libopencore-amrnb —enable-libopencore-
  amrwb —enable-libfreetype —enable-libgsm —enable-libmp3lame —enable-libnut -
   enable-libopenjpeg —enable-libopus —enable-librtmp —enable-libschroedinger -
   enable-libspeex —enable-libtheora —enable-libutvideo —enable-libvo-aacenc —
  enable-libvo-amrwbenc —enable-libvorbis —enable-libvpx —enable-libx264 —enab
  le-libxavs —enable-libxvid —enable-zlib
  libavutil 52. 9.100 / 52. 9.100
  libavcodec 54. 77.100 / 54. 77.100
  libavformat 54. 37.100 / 54. 37.100
  libavdevice 54. 3.100 / 54. 3.100
  libavfilter 3. 23.102 / 3. 23.102
  libswscale 2. 1.102 / 2. 1.102
  libswresample 0. 17.101 / 0. 17.101
  libpostproc 52. 2.100 / 52. 2.100
  Input #0, flv, from '164_29.flv' :
  Metadata :
  canSeekToEnd : false
  createdby : FMS 4.0
  creationdate : Tue Jan 08 00:26:19 2013
  Duration : 00:03:04.08, start : 0.000000, bitrate : 283 kb/s
  Stream #0:0 : Video : flv1, yuv420p, 320x240, 1k tbr, 1k tbn, 1k tbc
  Stream #0:1 : Audio : nellymoser, 22050 Hz, mono, flt
  At least one output file must be specified

  If you see the duration of video is of 3:04 but audio extracted from it is of 2:25 only.
  Actually i am using ffmpeg overlay to show two videos side by side in our debate project for the client. Now ffmpeg takes audio from first video by default. But we want the audio from both videos together as a debate going on. Hence I thought of a solution to extract audio from both videos and merge them and than apply them to the overlayed video. This will all work perfectly only if I get the complete audio from the video file i.e. of equal duration.
  For more information i am writing here the overlay command we are using :-

   **ffmpeg -i 164_29.flv  -vf "[in] scale=359:320, pad=2*iw+6:ih
  
    [left];    movie=164_30.flv, scale=359:320 [right]; [left][right] 
  
    overlay=365:0  [out]" -b:v 3600k -y a1.flv**
  
  
  
   **This is the console output of this overlay command:-**

  C :\Users\ritika.thakur>ffmpeg -i 164_29.flv -vf "[in] scale=359:320, pad=2*iw+6
  :ih [left] ; movie=164_30.flv, scale=359:320 [right] ; [left][right] overlay=365:0
  [out]" -b:v 3600k -y a1.flv
  ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers
  built on Nov 25 2012 12:23:20 with gcc 4.7.2 (GCC)
  configuration : —disable-static —enable-shared —enable-gpl —enable-version3
  —disable- pthreads —enable-runtime-cpudetect —enable- avisynth
  —enable-bzlib —enable
  -frei0r
  —enable-libass —enable-libopencore-amrnb —enable-libopencore-amrwb
  —enable- libfreetype —enable-libgsm —enable-libmp3lame —enable-libnut
  —enable-libopenjpeg —enable-libopus —enable-librtmp —enable-libschroedinger
  — enable-
  libspeex —enable-libtheora —enable- libutvideo
  —enable-libvo-aacenc —
  enable-libvo-amrwbenc —enable-libvorbis —enable-libvpx
  —enable-libx264 —enab
  le-libxavs —enable-libxvid —enable-zlib
  libavutil 52. 9.100 / 52. 9.100
  libavcodec 54. 77.100 / 54. 77.100
  libavformat 54. 37.100 / 54. 37.100
  libavdevice 54. 3.100 / 54. 3.100
  libavfilter 3. 23.102 / 3. 23.102
  libswscale 2. 1.102 / 2. 1.102
  libswresample 0. 17.101 / 0. 17.101
  libpostproc 52. 2.100 / 52. 2.100
  Input #0, flv, from '164_29.flv' :
  Metadata :
  canSeekToEnd : false
  createdby : FMS 4.0
  creationdate : Tue Jan 08 00:26:19 2013
  Duration : 00:03:04.08, start : 0.000000, bitrate : 283 kb/s
  Stream #0:0 : Video : flv1, yuv420p, 320x240, 1k tbr, 1k tbn, 1k tbc
  Stream #0:1 : Audio : nellymoser, 22050 Hz, mono, flt
  Output #0, flv, to 'a1.flv' :
  Metadata :
  canSeekToEnd : false
  createdby : FMS 4.0
  creationdate : Tue Jan 08 00:26:19 2013
  encoder : Lavf54.37.100
  Stream #0:0 : Video : flv1 ([2][0][0][0] / 0x0002), yuv420p, 724x320, q=2-31,
  3600 kb/s, 1k tbn, 1k tbc
  Stream #0:1 : Audio : mp3 ([2][0][0][0] / 0x0002), 22050 Hz, mono, fltp
  Stream mapping :
  Stream #0:0 -> #0:0 (flv -> flv)
  Stream #0:1 -> #0:1 (nellymoser -> libmp3lame)
  Press [q] to stop, [?] for help
  frame= 83 fps=0.0 q=4.1 size= 343kB time=00:00:07.01 bitrate= 401.2kbits/s
  frame= 149 fps=149 q=2.3 size= 861kB time=00:00:14.87 bitrate= 473.9kbits/s
  frame= 223 fps=148 q=2.0 size= 1492kB time=00:00:22.00 bitrate= 555.4kbits/s
  frame= 308 fps=153 q=2.0 size= 2195kB time=00:00:28.64 bitrate= 627.8kbits/s
  frame= 391 fps=156 q=2.0 size= 2858kB time=00:00:34.06 bitrate= 687.4kbits/s
  frame= 478 fps=159 q=2.0 size= 3541kB time=00:00:39.55 bitrate= 733.4kbits/s
  frame= 547 fps=156 q=2.0 size= 4293kB time=00:00:46.80 bitrate= 751.5kbits/s
  frame= 645 fps=161 q=2.0 size= 4896kB time=00:00:51.63 bitrate= 776.8kbits/s
  Buffer queue overflow, dropping.
  [Parsed_overlay_4 @ 0152ca80] Buffer queue overflow, dropping.
  Last message repeated 16 times
  frame= 731 fps=162 q=2.0 size= 5418kB time=00:00:56.61 bitrate= 784.0kbits/s
  Buffer queue overflow, dropping.
  [Parsed_overlay_4 @ 0152ca80] Buffer queue overflow, dropping.
  Last message repeated 49 times
  frame= 794 fps=158 q=2.0 size= 5802kB time=00:01:02.37 bitrate= 762.1kbits/s
  frame= 886 fps=160 q=2.0 size= 6363kB time=00:01:07.00 bitrate= 778.0kbits/s
  Buffer queue overflow, dropping.
  [Parsed_overlay_4 @ 0152ca80] Buffer queue overflow, dropping.
  Last message repeated 29 times
  frame= 954 fps=158 q=2.0 size= 6785kB time=00:01:13.31 bitrate= 758.2kbits/s
  frame= 1056 fps=162 q=2.0 size= 7377kB time=00:01:16.94 bitrate= 785.4kbits/s
  Buffer queue overflow, dropping.
  [Parsed_overlay_4 @ 0152ca80] Buffer queue overflow, dropping.
  Last message repeated 30 times
  frame= 1130 fps=161 q=2.0 size= 7789kB time=00:01:22.19 bitrate= 776.3kbits/s
  frame= 1217 fps=162 q=2.0 size= 8372kB time=00:01:27.68 bitrate= 782.1kbits/s
  frame= 1306 fps=163 q=2.0 size= 9074kB time=00:01:32.86 bitrate= 800.5kbits/s
  frame= 1393 fps=163 q=1.6 size= 9700kB time=00:01:38.41 bitrate= 807.3kbits/s
  frame= 1475 fps=163 q=2.0 size= 10278kB time=00:01:44.03 bitrate= 809.4kbits/s
  frame= 1568 fps=164 q=2.0 size= 10825kB time=00:01:48.52 bitrate= 817.1kbits/s
  frame= 1658 fps=165 q=2.0 size= 11439kB time=00:01:53.44 bitrate= 826.0kbits/s
  frame= 1734 fps=165 q=2.0 size= 12027kB time=00:01:58.31 bitrate= 832.7kbits/s
  frame= 1792 fps=162 q=2.0 size= 12579kB time=00:02:03.41 bitrate= 835.0kbits/s
  frame= 1851 fps=160 q=2.0 size= 13284kB time=00:02:10.74 bitrate= 832.3kbits/s
  frame= 1929 fps=160 q=2.0 size= 13922kB time=00:02:16.85 bitrate= 833.3kbits/s
  frame= 2010 fps=160 q=2.0 size= 14652kB time=00:02:23.39 bitrate= 837.1kbits/s
  frame= 2102 fps=161 q=2.0 size= 15329kB time=00:02:28.86 bitrate= 843.6kbits/s
  frame= 2200 fps=162 q=2.0 size= 15963kB time=00:02:34.08 bitrate= 848.7kbits/s
  frame= 2292 fps=163 q=2.0 size= 16554kB time=00:02:38.96 bitrate= 853.1kbits/s
  frame= 2378 fps=163 q=2.0 size= 17157kB time=00:02:44.50 bitrate= 854.4kbits/s
  frame= 2468 fps=164 q=2.0 size= 17826kB time=00:02:49.50 bitrate= 861.5kbits/s
  frame= 2564 fps=165 q=2.0 size= 18489kB time=00:02:54.43 bitrate= 868.3kbits/s
  Buffer queue overflow, dropping.
  [Parsed_overlay_4 @ 0152ca80] Buffer queue overflow, dropping.
  Last message repeated 15 times
  frame= 2647 fps=165 q=2.0 size= 19079kB time=00:02:59.53 bitrate= 870.6kbits/s
  frame= 2728 fps=165 q=2.0 Lsize= 19703kB time=00:03:04.13 bitrate= 876.6kbits/
  s video:19006kB audio:567kB subtitle:0 global headers:0kB muxing overhead 0.663315%

  Everything is working fine except that we want audio from both videos playing together in final overlayed file. I would be highly grateful if you can help in this and let me know if its possible to do via ffmpeg or not.

• File conversion to mp3 returning failure everytime using flutter package ffmpeg_kit_flutter

  6 novembre 2024, par Sanath balthar

  I am trying to convert a .wav audio file generated from a flutter's text to speech package - "flutter_tts" to mp3 file but it is failing everytime.
I have written the below code for file conversion. I have imported the package ffmpeg_kit_flutter. It doesnt even show why the conversion is failing.
I have looked up in stackoverflow and other sites but could not find any relevant solutions. I am using vscode as editor. I have attached flutter doctor output below as well. Could anyone please guide me ? Let me know if you need more information.

  


  List<string> command = [&#xA;              &#x27;-i&#x27;, &#x27;$filePath/998tts.wav&#x27;,&#xA;              &#x27;-c:a&#x27;, &#x27;mp3&#x27;,&#xA;              &#x27;$filePath/998.mp3&#x27;&#xA;            ];&#xA;&#xA; await FFmpegKitConfig.enableLogs();&#xA;            FFmpegKitConfig.enableLogCallback((log) =>print(&#x27;FFmpeg log: $log&#x27;));        &#xA;          FFmpegSession result = await FFmpegKit.executeWithArguments(command);&#xA;          dynamic resultcode = await result.getReturnCode();&#xA;          dynamic resultlogs = await result.getLogsAsString();&#xA;          // FFmpegKitConfig.setLogLevel(logLevel)&#xA;          if(ReturnCode.isSuccess(resultcode)){&#xA;          print("file saved after conversion at $filePath/998.mp3 and result : Success and logs : $resultlogs");&#xA;          }&#xA;          else{&#xA;            print("Result : failure and logs : $resultlogs");&#xA;          }&#xA;&#xA;Flutter doctor output:&#xA;[√] Flutter (Channel stable, 3.19.6, on Microsoft Windows [Version 10.0.22631.3296], locale en-IN)&#xA;[√] Windows Version (Installed version of Windows is version 10 or higher)&#xA;[√] Android toolchain - develop for Android devices (Android SDK version 34.0.0)&#xA;[√] Chrome - develop for the web&#xA;[!] Visual Studio - develop Windows apps (Visual Studio Community 2022 17.9.5)&#xA;X Visual Studio is missing necessary components. Please re-run the Visual Studio installer for the "Desktop development with C&#x2B;&#x2B;"&#xA;workload, and include these components:&#xA;MSVC v142 - VS 2019 C&#x2B;&#x2B; x64/x86 build tools&#xA;- If there are multiple build tool versions available, install the latest&#xA;C&#x2B;&#x2B; CMake tools for Windows&#xA;Windows 10 SDK&#xA;[√] Android Studio (version 2023.2)&#xA;[√] VS Code (version 1.89.0)&#xA;[√] Connected device (3 available)&#xA;[√] Network resources&#xA;&#xA;! Doctor found issues in 1 category.&#xA;&#xA;</string>

  


  Edit : Attaching error logs :

  


  I/flutter (25865): Loading ffmpeg-kit-flutter.
D/ffmpeg-kit-flutter(25865): FFmpegKitFlutterPlugin com.arthenica.ffmpegkit.flutter.FFmpegKitFlutterPlugin@a5d9788 started listening to events on io.flutter.plugin.common.EventChannel$IncomingStreamRequestHandler$EventSinkImplementation@4cfb5f2.
I/flutter (25865): Loaded ffmpeg-kit-flutter-android-audio-arm64-v8a-6.0.3.
I/flutter (25865): Result : failure and logs : ffmpeg version n6.0 Copyright (c) 2000-2023 the FFmpeg developers
I/flutter (25865):   built with Android (7155654, based on r399163b1) clang version 11.0.5 (https://android.googlesource.com/toolchain/llvm-project 87f1315dfbea7c137aa2e6d362dbb457e388158d)

I/flutter (25865):   configuration: --cross-prefix=aarch64-linux-android- --sysroot=/Users/sue/Library/Android/sdk/ndk/22.1.7171670/toolchains/llvm/prebuilt/darwin-x86_64/sysroot --prefix=/Users/sue/Projects/arthenica/ffmpeg-kit/prebuilt/android-arm64/ffmpeg --pkg-config=/opt/homebrew/bin/pkg-config --enable-version3 --arch=aarch64 --cpu=armv8-a --target-os=android --enable-neon --enable-asm --enable-inline-asm --ar=aarch64-linux-android-ar --cc=aarch64-linux-android24-clang --cxx=aarch64-linux-android24-clang++ --ranlib=aarch64-linux-android-ranlib --strip=aarch64-linux-android-strip --nm=aarch64-linux-android-nm --extra-libs='-L/Users/sue/Projects/arthenica/ffmpeg-kit/prebuilt/android-arm64/cpu-features/lib -lndk_compat' --disable-autodetect --enable-cross-compile 


  


• Building FFMPEG for Visual Studio development

  28 juillet 2016, par gboy

  I’m trying to use ffmpeg in Visual Studio 2013 C++ software (ultimately as part of an OpenCV project) - but right now I’m just trying to get basic FFMPEG functionality. In general, when building in Visual Studio, I build 64—bit software with Multi-threaded DLL runtime libraries. I have built ffmpeg using the general instructions for ’Native Windows compilation using ... MinGW-w64’ at http://ffmpeg.org/platform.html#Windows (I provide a more detailed set of steps I followed below...).

  After building the ffmpeg software on my system, I tried to create a simple ’hello world’ project in Visual Studio 2013. Specifically, I tried to implement the initial tutorial file presented at http://dranger.com/ffmpeg/tutorial01.html. Upon building the project, I get the error :

  c :\msys64\usr\local\ffmpeg\libavutil\common.h(45) : fatal error C1083 : Cannot
  open include file : ’libavutil/avconfig.h’ : No such file or directory

  The following are the detailed steps I took to build ffmpeg and create my basic Visual Studio project :

  ============ Building ffmpeg ===============

  1. Downloaded and intalled msys2-x86_64-20160205.exe from http://msys2.github.io
  2. Ran update-core to update the Msys2 install
  3. Ran pacman -Suu (twice) to complete the update (following the instructions about updating shortcuts, etc.)
  4. Then I quit out of the MSys2 shell and opened the MinGW-w64 Win64 Shell. In this new shell :
  5. Installed the following packages using pacman -S The list of packages I installed is : make, pkg-config, diffutils, mingw-w64-x86_64-yasm, mingw-w64-x86_64-gcc, mingw-w64-x86_64-SDL, git
  6. Then I cd’d into cd /usr/local
  7. Ran git clone https://git.ffmpeg.org/ffmpeg.git ffmpeg
  8. I wanted to build the ffmpeg library ’out-of-tree’ of this MSys64 folder. So, in the regular file system of my Windows machine I created a folder at C :\ffmpeg
  9. Back in the Win64 Shell, I cd’d to this new folder : cd /c/ffmpeg
  10. Then ran /usr/loca/ffmpeg/configure --enable-shared
  11. Then make -r
  12. And, finally make install

  Now, if I had to guess, my ’flaw’ was in the options I used when calling the ’configure’ script of ffmpeg. Do I need to use particular options so that I can take the ffmpeg libraries built here and use them as dynamic (DLL) libraries in Visual Studio ?

  ========== Configuring my Visual Studio Project ============

  Here’s how I created a simple hello world project in Visual Studio to see if ffmpeg is working.

  1. I created a new Visual C++ ’Empty Project’ in Visual Studio 2013

  2. I then configured the project properties as follows :

     a. In C/C++ => General => Additional Include Directories, I put

     C :\msys64\usr\local\ffmpeg

     b. In Linker=>General => Additional Library Directories, I pointed to each of the built library folders (basically I pointed at all of the libraries that were built to ensure I was not inadvertently missing the critical one). The list is as follows :

     • C :\ffmpeg\libavcodec
     • C :\ffmpeg\libavdevice
     • C :\ffmpeg\libavfilter
     • C :\ffmpeg\libavformat
     • C :\ffmpeg\libavutil
     • C :\ffmpeg\libswresample
     • C :\ffmpeg\libswscale
     • C :\ffmpeg

     c. In Linker=> Input => Additional Dependencies, I pointed to the particular libraries (again - I pointed to all of the ones present). The list is :

     • avcodec.lib
     • avdevice.lib
     • avfilter.lib
     • avformat.lib
     • avutil.lib
     • swresample.lib
     • swscale.lib

  3. I then created a new source file called ’tut01.c’ and copied/pasted the code from http://dranger.com/ffmpeg/tutorial01.c

  4. Then hit F7 and got the error specified above about not finding avconfig.h

  The above is my best guess as to the steps I need to follow to get this working in Windows (btw, it’s Windows 10, 64-bit) & Microsoft Visual Studio 2013. What should I change to get this basic program to build and run ?