Recherche avancée

Sur d’autres sites (7458)

• VLC : Unable to open SDP file for H265 using FFMPEG

  6 août 2018, par Anakooter

  I am streaming live video using rtp and ffmpeg using this command :

  ffmpeg -re -f v4l2 -framerate 30 -video_size 640x480 -i /dev/video0 -c:v libx265 -tune zerolatency -s 320x240 -preset ultrafast -pix_fmt yuv420p -r 10 -strict experimental -f rtp rtp://127.0.0.1:49170 > ffmpeg.sdp

  The generated sdp file is :
  

  v=0
  
  o=- 0 0 IN IP4 127.0.0.1
  
  s=No Name
  
  c=IN IP4 127.0.0.1
  
  t=0 0
  
  a=tool:libavformat 56.36.100
  
  m=video 49170 RTP/AVP 96
  
  a=rtpmap:96 H265/9000

  Vlc gives the following error :

  The format of ’file :///home/username/ffmpeg.sdp’ cannot be detected. Have a look at the log for details.

  Terminal gives the following error :
  

  [0xaf801010] ps demux error: cannot peek
  
  [0xaf801010] mjpeg demux error: cannot peek
  
  [0xaf801010] mpgv demux error: cannot peek
  
  [0xaf801010] ps demux error: cannot peek
  
  [0xb6d00618] main input error: no suitable demux module for `file/:///home/username/ffmpeg.sdp'

  If I simply change libx265 -> libx264 in the command and H265 -> H264 the stream runs perfectly fine.

  However I need to stream on H265. Any Suggestions ?

• avformat/mov : fix seeking with HEVC open GOP files

  18 février 2022, par Clément Bœsch

  avformat/mov : fix seeking with HEVC open GOP files
  This was tested with medias recorded from an iPhone XR and an iPhone 13.
  Here is how a typical stream looks like in coding order :
      ┌────────┬─────┬─────┬──────────┐
  
      │ sample | PTS | DTS | keyframe |
  
      ├────────┼─────┼─────┼──────────┤
  
      ┊        ┊     ┊     ┊          ┊
  
      │   53   │ 560 │ 510 │    No    │
  
      │   54   │ 540 │ 520 │    No    │
  
      │   55   │ 530 │ 530 │    No    │
  
      │   56   │ 550 │ 540 │    No    │
  
      │   57   │ 600 │ 550 │    Yes   │
  
      │ * 58   │ 580 │ 560 │    No    │
  
      │ * 59   │ 570 │ 570 │    No    │
  
      │ * 60   │ 590 │ 580 │    No    │
  
      │   61   │ 640 │ 590 │    No    │
  
      │   62   │ 620 │ 600 │    No    │
  
      ┊        ┊     ┊     ┊          ┊
  In composition/display order :
      ┌────────┬─────┬─────┬──────────┐
  
      │ sample | PTS | DTS | keyframe |
  
      ├────────┼─────┼─────┼──────────┤
  
      ┊        ┊     ┊     ┊          ┊
  
      │   55   │ 530 │ 530 │    No    │
  
      │   54   │ 540 │ 520 │    No    │
  
      │   56   │ 550 │ 540 │    No    │
  
      │   53   │ 560 │ 510 │    No    │
  
      │ * 59   │ 570 │ 570 │    No    │
  
      │ * 58   │ 580 │ 560 │    No    │
  
      │ * 60   │ 590 │ 580 │    No    │
  
      │   57   │ 600 │ 550 │    Yes   │
  
      │   63   │ 610 │ 610 │    No    │
  
      │   62   │ 620 │ 600 │    No    │
  
      ┊        ┊     ┊     ┊          ┊
  Sample/frame 58, 59 and 60 are B-frames which actually depends on the
  
  key frame (57). Here the key frame is not an IDR but a "CRA" (Clean
  
  Random Access).
  Initially, I thought I could rely on the sdtp box (independent and
  
  disposable samples), but unfortunately :
      sdtp[54] is_leading:0 sample_depends_on:1 sample_is_depended_on:0 sample_has_redundancy:0
  
      sdtp[55] is_leading:0 sample_depends_on:1 sample_is_depended_on:2 sample_has_redundancy:0
  
      sdtp[56] is_leading:0 sample_depends_on:1 sample_is_depended_on:2 sample_has_redundancy:0
  
      sdtp[57] is_leading:0 sample_depends_on:2 sample_is_depended_on:0 sample_has_redundancy:0
  
      sdtp[58] is_leading:0 sample_depends_on:1 sample_is_depended_on:0 sample_has_redundancy:0
  
      sdtp[59] is_leading:0 sample_depends_on:1 sample_is_depended_on:2 sample_has_redundancy:0
  
      sdtp[60] is_leading:0 sample_depends_on:1 sample_is_depended_on:2 sample_has_redundancy:0
  
      sdtp[61] is_leading:0 sample_depends_on:1 sample_is_depended_on:0 sample_has_redundancy:0
  
      sdtp[62] is_leading:0 sample_depends_on:1 sample_is_depended_on:0 sample_has_redundancy:0
  The information that might have been useful here would have been
  
  is_leading, but all the samples are set to 0 so this was unusable.
  Instead, we need to rely on sgpd/sbgp tables. In my case the video track
  
  contained 3 sgpd tables with the following grouping types : tscl, sync
  
  and tsas. In the sync table we have the following 2 entries (only) :
      sgpd.sync[1] : sync nal_unit_type:0x14
  
      sgpd.sync[2] : sync nal_unit_type:0x15
  (The count starts at 1 because 0 carries the undefined semantic, we'll
  
  see that later in the reference table).
  The NAL unit types presented here correspond to :
      libavcodec/hevc.h :    HEVC_NAL_IDR_N_LP       = 20,
  
      libavcodec/hevc.h :    HEVC_NAL_CRA_NUT        = 21,
  In parallel, the sbgp sync table contains the following :
      ┌────┬───────┬─────┐
  
      │ id │ count │ gdi │
  
      ├────┼───────┼─────┤
  
      │  0 │   1   │  1  │
  
      │  1 │   56  │  0  │
  
      │  2 │   1   │  2  │
  
      │  3 │   59  │  0  │
  
      │  4 │   1   │  2  │
  
      │  5 │   59  │  0  │
  
      │  6 │   1   │  2  │
  
      │  7 │   59  │  0  │
  
      │  8 │   1   │  2  │
  
      │  9 │   59  │  0  │
  
      │ 10 │   1   │  2  │
  
      │ 11 │   11  │  0  │
  
      └────┴───────┴─────┘
  The gdi column (group description index) directly refers to the index in
  
  the sgpd.sync table. This means the first frame is an IDR, then we have
  
  batches of undefined frames interlaced with CRA frames. No IDR ever
  
  appears again (tried on a 30+ seconds sample).
  With that information, we can build an heuristic using the presentation
  
  order.
  A few things needed to be introduced in this commit :
  1. min_sample_duration is extracted from the stts : we need the minimal
  
     step between sample in order to PTS-step backward to a valid point
  
  2. In order to avoid a loop over the ctts table systematically during a
  
     seek, we build an expanded list of sample offsets which will be used
  
     to translate from DTS to PTS
  
  3. An open_key_samples index to keep track of all the non-IDR key
  
     frames ; for now it only supports HEVC CRA frames. We should probably
  
     add BLA frames as well, but I don't have any sample so I prefered to
  
     leave that for later
  It is entirely possible I missed something obvious in my approach, but I
  
  couldn't come up with a better solution. Also, as mentioned in the diff,
  
  we could optimize is_open_key_sample(), but the linear scaling overhead
  
  should be fine for now since it only happens in seek events.
  Fixing this issue prevents sending broken packets to the decoder. With
  
  FFmpeg hevc decoder the frames are skipped, with VideoToolbox the frames
  
  are glitching.
  

  • [DH] libavformat/isom.h
  • [DH] libavformat/mov.c

• avformat_open_input failed to open unnamed pipe

  8 octobre 2015, par user2406774

  hi i am writing an application that reads data from network and feeds it to unnamed pipe and i want to read it from other end of pipe using avformat_open_input but this call blocking infinetly any idea about how to read stream from unnamed pipe

  here is the flow of code

   int fd[2]
  
      pipe(fd);
  
      if(fork()==0){
  
      //child process
  
      close(fd[1]);
  
      avcodec_register_all();
  
      av_register_all();
  
      avformat_network_init();
  
  
  
      AVInputFormat *input_format = av_find_input_format("mp4");
  
      if (!input_format)
  
      {
  
      fprintf(stderr, "Could not find MP4 demuxer.\n");
  
      exit(1);
  
      }
  
  
  
      AVFormatContext *input_context = NULL;
  
      fprintf(stderr,"Before opening input context\n");
  
      int ret = avformat_open_input(&input_context, fd[0],input_format, NULL);
  
     // int ret = avformat_open_input(&input_context, "pipe:fd[0]",input_format, NULL);
  
      fprintf(stderr,"After opening input context\n");
  
  
  
      }
  
  
  
  
  
      else{
  
          //parent process
  
          close(fd[0]);
  
          read data from Network();
  
          //write it to pipe
  
          ret=write(fd[1], udp_packet, len);
  
  
  
          }

  after opening input stream i am trying to transcode the mp4 to mpeg ts file .if i give mp4 file as filename filed in avformat_open_input API it is working fine

  any suggestions ?