Recherche avancée

Sur d’autres sites (10807)

• Not getting required audio codec in ffmpeg

  5 juin 2020, par user13546893

  I am using Colab to run the code.

  



  import os, sys, re

video_file_path = "/content/drive/My Drive/1111/Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate - Telly.mkv" #@param {type:"string"}
os.environ['fileName'] = filename_raw
os.environ['fileExtension'] = file_extension_raw

!ffmpeg -hide_banner -i "$inputFile" -c copy -strict -2 "$outputPath"/"$fileName".mp4


  



  But the problem is after conversion of mkv video in mp4 format my html5 player can't play the audio. Video is running fine.
Output :

  



  ffmpeg version 3.4.6-0ubuntu0.18.04.1 Copyright (c) 2000-2019 the FFmpeg developers built with gcc 7 (Ubuntu 7.3.0-16ubuntu3) configuration: --prefix=/usr --extra-version=0ubuntu0.18.04.1
--toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared libavutil 55. 78.100 / 55. 78.100 libavcodec 57.107.100 / 57.107.100 libavformat 57. 83.100 / 57. 83.100 libavdevice 57. 10.100 / 57.
10.100 libavfilter 6.107.100 / 6.107.100 libavresample 3. 7. 0 / 3. 7. 0 libswscale 4. 8.100 / 4. 8.100 libswresample 2. 9.100 / 2. 9.100 libpostproc 54. 7.100 / 54. 7.100 Input #0, matroska,webm, from '/content/drive/Shared drives/Vedant/1111/Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate - Telly.mkv': Metadata: title : MoviePirate.in | Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate
- Telly.mkv encoder : libebml v1.3.10 + libmatroska v1.5.2 creation_time : 2020-05-01T15:55:34.000000Z Duration: 01:46:56.51, start: 0.000000, bitrate: 2975 kb/s Stream #0:0: Video: hevc (Main 10), yuv420p10le(tv), 1920x960, SAR 1:1 DAR 2:1, 24 fps, 24 tbr, 1k tbn, 24 tbc (default) Metadata: title : MoviePirate.in BPS-eng : 2205883 DURATION-eng : 01:46:56.500000000 NUMBER_OF_FRAMES-eng: 153996 NUMBER_OF_BYTES-eng: 1769256160 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(hin): Audio: eac3, 48000 Hz, 5.1(side), fltp, 768 kb/s Metadata: title : MoviePirate.in BPS-eng : 768000 DURATION-eng : 01:46:56.512000000 NUMBER_OF_FRAMES-eng: 200516 NUMBER_OF_BYTES-eng: 615985152 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:2(eng): Subtitle: subrip Metadata: title : MoviePirate.in BPS-eng : 42 DURATION-eng : 01:41:50.375000000 NUMBER_OF_FRAMES-eng: 1123 NUMBER_OF_BYTES-eng: 32413
_STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES File '/content/drive/Shared drives/Vedant/1111//Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate
- Telly.mp4' already exists. Overwrite ? [y/N] y [mp4 @ 0x560897578c00] track 1: codec frame size is not set Output #0, mp4, to '/content/drive/Shared drives/Vedant/1111//Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate
- Telly.mp4': Metadata: title : MoviePirate.in | Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate - Telly.mkv encoder : Lavf57.83.100 Stream #0:0: Video: hevc (Main 10) (hev1 / 0x31766568), yuv420p10le(tv), 1920x960 [SAR 1:1 DAR 2:1], q=2-31, 24 fps, 24 tbr, 16k tbn, 1k tbc (default) Metadata: title : MoviePirate.in BPS-eng : 2205883 DURATION-eng : 01:46:56.500000000 NUMBER_OF_FRAMES-eng: 153996 NUMBER_OF_BYTES-eng: 1769256160 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34
_STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(hin): Audio: eac3 (ec-3 / 0x332D6365), 48000 Hz,
5.1(side), fltp, 768 kb/s Metadata: title : MoviePirate.in BPS-eng : 768000 DURATION-eng : 01:46:56.512000000 NUMBER_OF_FRAMES-eng: 200516 NUMBER_OF_BYTES-eng: 615985152 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1
-> #0:1 (copy) Press [q] to stop, [?] for help frame=153996 fps=10450 q=-1.0 Lsize= 2334010kB time=01:46:56.48 bitrate=2979.9kbits/s speed= 435x video:1727789kB audio:601548kB subtitle:0kB other streams:0kB global headers:2kB muxing overhead: 0.200594%    ffmpeg version
3.4.6-0ubuntu0.18.04.1 Copyright (c) 2000-2019 the FFmpeg developers built with gcc 7 (Ubuntu 7.3.0-16ubuntu3) configuration: --prefix=/usr
--extra-version=0ubuntu0.18.04.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --disable-stripping --enable-avresample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librubberband --enable-librsvg --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libopencv --enable-libx264 --enable-shared libavutil 55. 78.100 / 55. 78.100 libavcodec 57.107.100 / 57.107.100 libavformat 57. 83.100 / 57. 83.100 libavdevice 57. 10.100 / 57.
10.100 libavfilter 6.107.100 / 6.107.100 libavresample 3. 7. 0 / 3. 7. 0 libswscale 4. 8.100 / 4. 8.100 libswresample 2. 9.100 / 2. 9.100 libpostproc 54. 7.100 / 54. 7.100 Input #0, matroska,webm, from '/content/drive/Shared drives/Vedant/1111/Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate - Telly.mkv': Metadata: title : MoviePirate.in | Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate
- Telly.mkv encoder : libebml v1.3.10 + libmatroska v1.5.2 creation_time : 2020-05-01T15:55:34.000000Z Duration: 01:46:56.51, start: 0.000000, bitrate: 2975 kb/s Stream #0:0: Video: hevc (Main 10), yuv420p10le(tv), 1920x960, SAR 1:1 DAR 2:1, 24 fps, 24 tbr, 1k tbn, 24 tbc (default) Metadata: title : MoviePirate.in BPS-eng : 2205883 DURATION-eng : 01:46:56.500000000 NUMBER_OF_FRAMES-eng: 153996 NUMBER_OF_BYTES-eng: 1769256160 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(hin): Audio: eac3, 48000 Hz, 5.1(side), fltp, 768 kb/s Metadata: title : MoviePirate.in BPS-eng : 768000 DURATION-eng : 01:46:56.512000000 NUMBER_OF_FRAMES-eng: 200516 NUMBER_OF_BYTES-eng: 615985152 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:2(eng): Subtitle: subrip Metadata: title : MoviePirate.in BPS-eng : 42 DURATION-eng : 01:41:50.375000000 NUMBER_OF_FRAMES-eng: 1123 NUMBER_OF_BYTES-eng: 32413
_STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES File '/content/drive/Shared drives/Vedant/1111//Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate
- Telly.mp4' already exists. Overwrite ? [y/N] y [mp4 @ 0x560897578c00] track 1: codec frame size is not set Output #0, mp4, to '/content/drive/Shared drives/Vedant/1111//Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate
- Telly.mp4': Metadata: title : MoviePirate.in | Mrs.Serial Killer 2020 1080p 10bit NF WEBRip Hindi DD+5.1 Atmos x265 HEVC ESub - MoviePirate - Telly.mkv encoder : Lavf57.83.100 Stream #0:0: Video: hevc (Main 10) (hev1 / 0x31766568), yuv420p10le(tv), 1920x960 [SAR 1:1 DAR 2:1], q=2-31, 24 fps, 24 tbr, 16k tbn, 1k tbc (default) Metadata: title : MoviePirate.in BPS-eng : 2205883 DURATION-eng : 01:46:56.500000000 NUMBER_OF_FRAMES-eng: 153996 NUMBER_OF_BYTES-eng: 1769256160 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34
_STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(hin): Audio: eac3 (ec-3 / 0x332D6365), 48000 Hz,
5.1(side), fltp, 768 kb/s Metadata: title : MoviePirate.in BPS-eng : 768000 DURATION-eng : 01:46:56.512000000 NUMBER_OF_FRAMES-eng: 200516 NUMBER_OF_BYTES-eng: 615985152 _STATISTICS_WRITING_APP-eng: mkvmerge v44.0.0 ('Domino') 64-bit _STATISTICS_WRITING_DATE_UTC-eng: 2020-05-01 15:55:34 _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1
-> #0:1 (copy) Press [q] to stop, [?] for help frame=153996 fps=10450 q=-1.0 Lsize= 2334010kB time=01:46:56.48 bitrate=2979.9kbits/s speed= 435x video:1727789kB audio:601548kB subtitle:0kB other streams:0kB global headers:2kB muxing overhead: 0.200594%


  



  What changes should I do in the Code ?

  


• How to stream live-video display from a webcam using FFMPEG command on tcl version 8.0 and windows 7 ?

  27 juin 2019, par M. D. P

  I am working on project were i need to have the live video streaming.
  I am able to save the video using the command :

  proc a {}  { 
  
  exec ffmpeg -f dshow -rtbufsize 64M -i "video=Integrated Webcam" -s 1280x720 -f sdl2 -
  
  }
  
  a
  
  
  
  this is the current error:

  ffmpeg started on 2017-11-17 at 15:24:45
  
  Report written to "ffmpeg-20171117-152445.log"
  
  Command line:
  
  ffmpeg -f dshow -report -rtbufsize 64M -i "video=Integrated Webcam" -s 1280x720 -f sdl2 -
  
  ffmpeg version N-87353-g183fd30 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with gcc 7.2.0 (GCC)
  
    configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib
  
    libavutil      55. 76.100 / 55. 76.100
  
    libavcodec     57.106.101 / 57.106.101
  
    libavformat    57. 82.101 / 57. 82.101
  
    libavdevice    57.  8.101 / 57.  8.101
  
    libavfilter     6.105.100 /  6.105.100
  
    libswscale      4.  7.103 /  4.  7.103
  
    libswresample   2.  8.100 /  2.  8.100
  
    libpostproc    54.  6.100 / 54.  6.100
  
  Splitting the commandline.
  
  Reading option '-f' ... matched as option 'f' (force format) with argument 'dshow'.
  
  Reading option '-report' ... matched as option 'report' (generate a report) with argument '1'.
  
  Reading option '-rtbufsize' ... matched as AVOption 'rtbufsize' with argument '64M'.
  
  Reading option '-i' ... matched as input url with argument 'video=Integrated Webcam'.
  
  Reading option '-s' ... matched as option 's' (set frame size (WxH or abbreviation)) with argument '1280x720'.
  
  Reading option '-f' ... matched as option 'f' (force format) with argument 'sdl2'.
  
  Reading option '-' ... matched as output url.
  
  Finished splitting the commandline.
  
  Parsing a group of options: global .
  
  Applying option report (generate a report) with argument 1.
  
  Successfully parsed a group of options.
  
  Parsing a group of options: input url video=Integrated Webcam.
  
  Applying option f (force format) with argument dshow.
  
  Successfully parsed a group of options.
  
  Opening an input file: video=Integrated Webcam.
  
  [dshow @ 0000000000e06a40] Selecting pin Capture on video
  
  dshow passing through packet of type video size   614400 timestamp 5773900280000 orig timestamp 5773900274254 graph timestamp 5773900280000 diff 5746 Integrated Webcam
  
  [dshow @ 0000000000e06a40] All info found
  
  Input #0, dshow, from 'video=Integrated Webcam':
  
    Duration: N/A, start: 577390.028000, bitrate: N/A
  
      Stream #0:0, 1, 1/10000000: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 640x480, 30 fps, 30 tbr, 10000k tbn, 10000k tbc
  
  Successfully opened the file.
  
  Parsing a group of options: output url -.
  
  Applying option s (set frame size (WxH or abbreviation)) with argument 1280x720.
  
  Applying option f (force format) with argument sdl2.
  
  Successfully parsed a group of options.
  
  Opening an output file: -.
  
  Successfully opened the file.
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (rawvideo (native) -> rawvideo (native))
  
  Press [q] to stop, [?] for help
  
  cur_dts is invalid (this is harmless if it occurs once at the start per stream)
  
  [rawvideo @ 0000000000d90be0] PACKET SIZE: 614400, STRIDE: 1280
  
  detected 4 logical cores
  
  dshow passing through packet of type video size   614400 timestamp 5773900600000 orig timestamp 5773900607587 graph timestamp 5773900600000 diff -7587 Integrated Webcam
  
  [graph 0 input from stream 0:0 @ 0000000000d96200] Setting 'video_size' to value '640x480'
  
  [graph 0 input from stream 0:0 @ 0000000000d96200] Setting 'pix_fmt' to value '1'
  
  [graph 0 input from stream 0:0 @ 0000000000d96200] Setting 'time_base' to value '1/10000000'
  
  [graph 0 input from stream 0:0 @ 0000000000d96200] Setting 'pixel_aspect' to value '0/1'
  
  [graph 0 input from stream 0:0 @ 0000000000d96200] Setting 'sws_param' to value 'flags=2'
  
  [graph 0 input from stream 0:0 @ 0000000000d96200] Setting 'frame_rate' to value '10000000/333333'
  
  [graph 0 input from stream 0:0 @ 0000000000d96200] w:640 h:480 pixfmt:yuyv422 tb:1/10000000 fr:10000000/333333 sar:0/1 sws_param:flags=2
  
  [scaler_out_0_0 @ 0000000000d967e0] Setting 'w' to value '1280'
  
  [scaler_out_0_0 @ 0000000000d967e0] Setting 'h' to value '720'
  
  [scaler_out_0_0 @ 0000000000d967e0] Setting 'flags' to value 'bicubic'
  
  [scaler_out_0_0 @ 0000000000d967e0] w:1280 h:720 flags:'bicubic' interl:0
  
  [AVFilterGraph @ 0000000000d94d40] query_formats: 4 queried, 3 merged, 0 already done, 0 delayed
  
  [scaler_out_0_0 @ 0000000000d967e0] w:640 h:480 fmt:yuyv422 sar:0/1 -> w:1280 h:720 fmt:yuyv422 sar:0/1 flags:0x4
  
  dshow passing through packet of type video size   614400 timestamp 5773900970000 orig timestamp 5773900940920 graph timestamp 5773900970000 diff 29080 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773901240000 orig timestamp 5773901274253 graph timestamp 5773901240000 diff -34253 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773901720000 orig timestamp 5773901607586 graph timestamp 5773901720000 diff 112414 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773902040000 orig timestamp 5773901940919 graph timestamp 5773902040000 diff 99081 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773902360000 orig timestamp 5773902274252 graph timestamp 5773902360000 diff 85748 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773902680000 orig timestamp 5773902607585 graph timestamp 5773902680000 diff 72415 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773903000000 orig timestamp 5773902940918 graph timestamp 5773903000000 diff 59082 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773903320000 orig timestamp 5773903274251 graph timestamp 5773903320000 diff 45749 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773903640000 orig timestamp 5773903607584 graph timestamp 5773903640000 diff 32416 Integrated Webcam
  
  [sdl,sdl2 @ 0000000000d911c0] w:1280 h:720 fmt:yuyv422 -> w:1280 h:720
  
  Output #0, sdl,sdl2, to 'pipe:':
  
    Metadata:
  
      encoder         : Lavf57.82.101
  
      Stream #0:0, 0, 333333/10000000: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1280x720, q=2-31, 442368 kb/s, 30 fps, 30 tbn, 30 tbc
  
      Metadata:
  
        encoder         : Lavc57.106.101 rawvideo
  
  dshow passing through packet of type video size   614400 timestamp 5773903970000 orig timestamp 5773903940917 graph timestamp 5773903970000 diff 29083 Integrated Webcam
  
  dshow passing through packet of type video size   614400 timestamp 5773904280000 orig timestamp 5773904274250 graph timestamp 5773904280000 diff 5750 Integrated Webcam
  
  av_interleaved_write_frame(): Operation not permitted
  
  No more output streams to write to, finishing.
  
  dshow passing through packet of type video size   614400 timestamp 5773904660000 orig timestamp 5773904607583 graph timestamp 5773904660000 diff 52417 Integrated Webcam
  
  frame=    1 fps=0.0 q=-0.0 Lsize=N/A time=00:00:00.03 bitrate=N/A speed=0.0797x    
  
  video:1800kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
  
  Input file #0 (video=Integrated Webcam):
  
    Input stream #0:0 (video): 1 packets read (614400 bytes); 1 frames decoded; 
  
    Total: 1 packets (614400 bytes) demuxed
  
  Output file #0 (pipe:):
  
    Output stream #0:0 (video): 1 frames encoded; 1 packets muxed (1843200 bytes); 
  
    Total: 1 packets (1843200 bytes) muxed
  
  1 frames successfully decoded, 0 decoding errors
  
  dshow passing through packet of type video size        0 timestamp 5773907070000 orig timestamp 2644601806342528 graph timestamp 5773907070000 diff -2638827899272528 Integrated Webcam
  
  Conversion failed!

  % source c:/other/a/d.tcl
  
  couldn't execute "ffmpeg -f dshow -t 00:00:10 -i {video=Integrated Webcam} -b 5000k -s 1280x720 c:\test\sample-a.avi": no such file or directory
  
  % source c:/other/a/d.tcl
  
  invalid command name "ffmpeg"
  
  % source c:/other/a/d.tcl
  
  ffmpeg version N-87353-g183fd30 Copyright (c) 2000-2017 the FFmpeg developers
  
    built with gcc 7.2.0 (GCC)
  
    configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib
  
    libavutil      55. 76.100 / 55. 76.100
  
    libavcodec     57.106.101 / 57.106.101
  
    libavformat    57. 82.101 / 57. 82.101
  
    libavdevice    57.  8.101 / 57.  8.101
  
    libavfilter     6.105.100 /  6.105.100
  
    libswscale      4.  7.103 /  4.  7.103
  
    libswresample   2.  8.100 /  2.  8.100
  
    libpostproc    54.  6.100 / 54.  6.100
  
  Input #0, dshow, from 'video=Integrated Webcam':
  
    Duration: N/A, start: 523220.045000, bitrate: N/A
  
      Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 640x480, 30 fps, 30 tbr, 10000k tbn, 10000k tbc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (rawvideo (native) -> rawvideo (native))
  
  Press [q] to stop, [?] for help
  
  Output #0, sdl,sdl2, to 'pipe:':
  
    Metadata:
  
      encoder         : Lavf57.82.101
  
      Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1280x720, q=2-31, 442368 kb/s, 30 fps, 30 tbn, 30 tbc
  
      Metadata:
  
        encoder         : Lavc57.106.101 rawvideo
  
  av_interleaved_write_frame(): Operation not permitted
  
  frame=    1 fps=0.0 q=-0.0 Lsize=N/A time=00:00:00.03 bitrate=N/A speed=0.0471x
  
  video:1800kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
  
  Conversion failed!
  
  %

  But, the problem is i don’t want to save the video, I just want to have live video streaming.

  link : https://trac.ffmpeg.org/wiki/StreamingGuide, provide the command for live video streaming, but it want work, the webcem gets started, but live video streaming is not displayed on screen.

  so, can any one help me out to get right "FFMPEG" command or even any TCL script, to get the live video streaming displayed on on my windows 7.

  ffplay started on 2017-11-17 at 12:44:40
  
  Report written to "ffplay-20171117-124440.log"
  
  Command line:
  
  ffplay -report C:/test/sample.avi
  
  ffplay version N-87353-g183fd30 Copyright (c) 2003-2017 the FFmpeg developers
  
    built with gcc 7.2.0 (GCC)
  
    configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib
  
    libavutil      55. 76.100 / 55. 76.100
  
    libavcodec     57.106.101 / 57.106.101
  
    libavformat    57. 82.101 / 57. 82.101
  
    libavdevice    57.  8.101 / 57.  8.101
  
    libavfilter     6.105.100 /  6.105.100
  
    libswscale      4.  7.103 /  4.  7.103
  
    libswresample   2.  8.100 /  2.  8.100
  
    libpostproc    54.  6.100 / 54.  6.100
  
      nan    :  0.000 fd=   0 aq=    0KB vq=    0KB sq=    0B f=0/0   
  
  [NULL @ 0000000002aea040] Opening 'C:/test/sample.avi' for reading
  
  [file @ 0000000002ae9c80] Setting default whitelist 'file,crypto'
  
  [avi @ 0000000002aea040] Format avi probed with size=2048 and score=100
  
  [avi @ 0000000002af30c0] use odml:1
  
  [avi @ 0000000002aea040] Before avformat_find_stream_info() pos: 5678 bytes read:107912 seeks:4 nb_streams:1
  
  [avi @ 0000000002aea040] All info found
  
  [avi @ 0000000002aea040] After avformat_find_stream_info() pos: 33035 bytes read:107912 seeks:4 frames:1
  
  Input #0, avi, from 'C:/test/sample.avi':
  
    Metadata:
  
      encoder         : Lavf57.82.101
  
    Duration: 00:00:10.00, start: 0.000000, bitrate: 5072 kb/s
  
      Stream #0:0, 1, 1/30: Video: mpeg4 (Simple Profile) (FMP4 / 0x34504D46), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], 5078 kb/s, 30 fps, 30 tbr, 30 tbn, 30 tbc
  
  detected 4 logical cores
  
      nan M-V:    nan fd=   0 aq=    0KB vq=  595KB sq=    0B f=0/0   
  
  Video frame changed from size:0x0 format:none serial:-1 to size:1280x720 format:yuv420p serial:1
  
  [ffplay_buffer @ 0000000003a17ee0] Setting 'video_size' to value '1280x720'
  
  [ffplay_buffer @ 0000000003a17ee0] Setting 'pix_fmt' to value '0'
  
  [ffplay_buffer @ 0000000003a17ee0] Setting 'time_base' to value '1/30'
  
  [ffplay_buffer @ 0000000003a17ee0] Setting 'pixel_aspect' to value '1/1'
  
  [ffplay_buffer @ 0000000003a17ee0] Setting 'frame_rate' to value '30/1'
  
  [ffplay_buffer @ 0000000003a17ee0] w:1280 h:720 pixfmt:yuv420p tb:1/30 fr:30/1 sar:1/1 sws_param:
  
  [AVFilterGraph @ 0000000002b14fc0] query_formats: 2 queried, 1 merged, 0 already done, 0 delayed

• How to get .mp4 videos from motion on a Raspberry Pi ?

  3 novembre 2017, par Maarti

  I use motion on my laptop and it works perfectly in any format. But when I use it on my Raspberry Pi 3 (Raspbian Jessie) with the Raspberry Camera V2, the only formats that work are : .avi and .swf.

  When I choose any other format, the output video is a "0 sec video" that is played and closed instantly.

  I would like to have .mp4 or .ogg output so I can read it easily with HTML5.

  Here is the motion codec documentation.

  Here is my config file :

  ############################################################
  
  # Daemon
  
  ############################################################
  
  
  
  # Start in daemon (background) mode and release terminal (default: off)
  
  daemon on
  
  
  
  # File to store the process ID, also called pid file. (default: not defined)
  
  process_id_file /var/run/motion/motion.pid
  
  
  
  ############################################################
  
  # Basic Setup Mode
  
  ############################################################
  
  
  
  # Start in Setup-Mode, daemon disabled. (default: off)
  
  setup_mode off
  
  
  
  
  
  # Use a file to save logs messages, if not defined stderr and syslog is used. (default: not defined)
  
  #logfile /mnt/camshare/Cam1/motion.log
  
  logfile /tmp/motion.log
  
  
  
  # Level of log messages [1..9] (EMR, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL). (default: 6 / NTC)
  
  log_level 2
  
  
  
  # Filter to log messages by type (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). (default: ALL)
  
  log_type all
  
  
  
  ###########################################################
  
  # Capture device options
  
  ############################################################
  
  
  
  # Videodevice to be used for capturing  (default /dev/video0)
  
  # for FreeBSD default is /dev/bktr0
  
  #videodevice /dev/video0
  
  
  
  # v4l2_palette allows to choose preferable palette to be use by motion
  
  # to capture from those supported by your videodevice. (default: 17)
  
  # E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
  
  # V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
  
  # Setting v4l2_palette to 2 forces motion to use V4L2_PIX_FMT_SBGGR8
  
  # instead.
  
  #
  
  # Values :
  
  # V4L2_PIX_FMT_SN9C10X : 0  'S910'
  
  # V4L2_PIX_FMT_SBGGR16 : 1  'BYR2'
  
  # V4L2_PIX_FMT_SBGGR8  : 2  'BA81'
  
  # V4L2_PIX_FMT_SPCA561 : 3  'S561'
  
  # V4L2_PIX_FMT_SGBRG8  : 4  'GBRG'
  
  # V4L2_PIX_FMT_SGRBG8  : 5  'GRBG'
  
  # V4L2_PIX_FMT_PAC207  : 6  'P207'
  
  # V4L2_PIX_FMT_PJPG    : 7  'PJPG'
  
  # V4L2_PIX_FMT_MJPEG   : 8  'MJPEG'
  
  # V4L2_PIX_FMT_JPEG    : 9  'JPEG'
  
  # V4L2_PIX_FMT_RGB24   : 10 'RGB3'
  
  # V4L2_PIX_FMT_SPCA501 : 11 'S501'
  
  # V4L2_PIX_FMT_SPCA505 : 12 'S505'
  
  # V4L2_PIX_FMT_SPCA508 : 13 'S508'
  
  # V4L2_PIX_FMT_UYVY    : 14 'UYVY'
  
  # V4L2_PIX_FMT_YUYV    : 15 'YUYV'
  
  # V4L2_PIX_FMT_YUV422P : 16 '422P'
  
  # V4L2_PIX_FMT_YUV420  : 17 'YU12'
  
  #
  
  v4l2_palette 7
  
  
  
  # Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
  
  # This is ONLY used for FreeBSD. Leave it commented out for Linux
  
  ; tunerdevice /dev/tuner0
  
  
  
  # The video input to be used (default: -1)
  
  # Should normally be set to 0 or 1 for video/TV cards, and -1 for USB cameras
  
  input -1
  
  
  
  # The video norm to use (only for video capture and TV tuner cards)
  
  # Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
  
  norm 0
  
  
  
  # The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
  
  frequency 0
  
  
  
  # Rotate image this number of degrees. The rotation affects all saved images as
  
  # well as movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
  
  rotate 0
  
  
  
  # Image width (pixels). Valid range: Camera dependent, default: 352
  
  #width 1024
  
  width 640
  
  
  
  # Image height (pixels). Valid range: Camera dependent, default: 288
  
  #height 576
  
  height 480
  
  
  
  # Maximum number of frames to be captured per second.
  
  # Valid range: 2-100. Default: 100 (almost no limit).
  
  framerate 15
  
  
  
  # Minimum time in seconds between capturing picture frames from the camera.
  
  # Default: 0 = disabled - the capture rate is given by the camera framerate.
  
  # This option is used when you want to capture images at a rate lower than 2 per second.
  
  minimum_frame_time 0
  
  
  
  # URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// mjpg:// or file:///)
  
  # Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
  
  ;netcam_url http://127.0.0.1/cgi-bin/raspicam.sh
  
  
  
  # Username and password for network camera (only if required). Default: not defined
  
  # Syntax is user:password
  
  ; netcam_userpass value
  
  
  
  # The setting for keep-alive of network socket, should improve performance on compatible net cameras.
  
  # off:   The historical implementation using HTTP/1.0, closing the socket after each http request.
  
  # force: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
  
  # on:    Use HTTP/1.1 requests that support keep alive as default.
  
  # Default: off
  
  netcam_keepalive off
  
  
  
  # URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
  
  # If a port number other than 80 is needed, use "http://myproxy:1234".
  
  # Default: not defined
  
  ; netcam_proxy value
  
  
  
  # Set less strict jpeg checks for network cameras with a poor/buggy firmware.
  
  # Default: off
  
  netcam_tolerant_check off
  
  
  
  # Let motion regulate the brightness of a video device (default: off).
  
  # The auto_brightness feature uses the brightness option as its target value.
  
  # If brightness is zero auto_brightness will adjust to average brightness value 128.
  
  # Only recommended for cameras without auto brightness
  
  auto_brightness off
  
  
  
  # Set the initial brightness of a video device.
  
  # If auto_brightness is enabled, this value defines the average brightness level
  
  # which Motion will try and adjust to.
  
  # Valid range 0-255, default 0 = disabled
  
  brightness 0
  
  
  
  # Set the contrast of a video device.
  
  # Valid range 0-255, default 0 = disabled
  
  contrast 0
  
  
  
  # Set the saturation of a video device.
  
  # Valid range 0-255, default 0 = disabled
  
  saturation 0
  
  
  
  # Set the hue of a video device (NTSC feature).
  
  # Valid range 0-255, default 0 = disabled
  
  hue 0
  
  
  
  ############################################################
  
  # File "camera" support - read raw YUV data from a file
  
  ############################################################
  
  #filecam_path /home/pi/test-cap/motion-mmal.capture
  
  
  
  ############################################################
  
  # OpenMax/MMAL camera support for Raspberry Pi
  
  ############################################################
  
  mmalcam_name vc.ril.camera
  
  #mmalcam_control_params
  
  #mmalcam_raw_capture_file /home/pi/motion-mmal.capture
  
  
  
  # Switch this setting to "on" to use the still image mode of the Pi's camera
  
  # instead of video. This gives a wider field of view, but requires
  
  # a much slower frame-rate to achieve exposure stability
  
  # (e.g. 0.25 fps or slower). You can use the minimum_frame_time
  
  # parameter above to achieve this
  
  
  
  mmalcam_use_still off
  
  
  
  
  
  ############################################################
  
  # Round Robin (multiple inputs on same video device name)
  
  ############################################################
  
  
  
  # Number of frames to capture in each roundrobin step (default: 1)
  
  roundrobin_frames 1
  
  
  
  # Number of frames to skip before each roundrobin step (default: 1)
  
  roundrobin_skip 1
  
  
  
  # Try to filter out noise generated by roundrobin (default: off)
  
  switchfilter off
  
  
  
  
  
  ############################################################
  
  # Motion Detection Settings:
  
  ############################################################
  
  
  
  # Threshold for number of changed pixels in an image that
  
  # triggers motion detection (default: 1500)
  
  threshold 1500
  
  
  
  # Automatically tune the threshold down if possible (default: off)
  
  threshold_tune off
  
  
  
  # Noise threshold for the motion detection (default: 32)
  
  noise_level 32
  
  
  
  # Automatically tune the noise threshold (default: on)
  
  noise_tune on
  
  
  
  # Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
  
  # Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
  
  # (l)abeling must only be used once and the 'l' must be the last letter.
  
  # Comment out to disable
  
  despeckle_filter EedDl
  
  
  
  # Detect motion in predefined areas (1 - 9). Areas are numbered like that:  1 2 3
  
  # A script (on_area_detected) is started immediately when motion is         4 5 6
  
  # detected in one of the given areas, but only once during an event.        7 8 9
  
  # One or more areas can be specified with this option. Take care: This option
  
  # does NOT restrict detection to these areas! (Default: not defined)
  
  ; area_detect value
  
  
  
  # PGM file to use as a sensitivity mask.
  
  # Full path name to. (Default: not defined)
  
  ; mask_file value
  
  
  
  # Dynamically create a mask file during operation (default: 0)
  
  # Adjust speed of mask changes from 0 (off) to 10 (fast)
  
  smart_mask_speed 0
  
  
  
  # Ignore sudden massive light intensity changes given as a percentage of the picture
  
  # area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
  
  lightswitch 0
  
  
  
  # Picture frames must contain motion at least the specified number of frames
  
  # in a row before they are detected as true motion. At the default of 1, all
  
  # motion is detected. Valid range: 1 to thousands, recommended 1-5
  
  minimum_motion_frames 1
  
  
  
  # Specifies the number of pre-captured (buffered) pictures from before motion
  
  # was detected that will be output at motion detection.
  
  # Recommended range: 0 to 5 (default: 0)
  
  # Do not use large values! Large values will cause Motion to skip video frames and
  
  # cause unsmooth movies. To smooth movies use larger values of post_capture instead.
  
  pre_capture 2
  
  
  
  # Number of frames to capture after motion is no longer detected (default: 0)
  
  post_capture 2
  
  
  
  # Event Gap is the seconds of no motion detection that triggers the end of an event.
  
  # An event is defined as a series of motion images taken within a short timeframe.
  
  # Recommended value is 60 seconds (Default). The value -1 is allowed and disables
  
  # events causing all Motion to be written to one single movie file and no pre_capture.
  
  # If set to 0, motion is running in gapless mode. Movies don't have gaps anymore. An
  
  # event ends right after no more motion is detected and post_capture is over.
  
  event_gap 60
  
  
  
  # Maximum length in seconds of an mpeg movie
  
  # When value is exceeded a new movie file is created. (Default: 0 = infinite)
  
  # ATTENTION: when you're not using the motion build from the tutorial, it might fail with error 'Unknown config option "max_mpeg_time"'
  
  # the use this line instead:
  
  # max_movie_time 60
  
  max_movie_time 60
  
  
  
  # Always save images even if there was no motion (default: off)
  
  emulate_motion off
  
  
  
  
  
  ############################################################
  
  # Image File Output
  
  ############################################################
  
  
  
  # Output 'normal' pictures when motion is detected (default: on)
  
  # Valid values: on, off, first, best, center
  
  # When set to 'first', only the first picture of an event is saved.
  
  # Picture with most motion of an event is saved when set to 'best'.
  
  # Picture with motion nearest center of picture is saved when set to 'center'.
  
  # Can be used as preview shot for the corresponding movie.
  
  output_pictures best
  
  
  
  # Output pictures with only the pixels moving object (ghost images) (default: off)
  
  output_debug_pictures off
  
  
  
  # The quality (in percent) to be used by the jpeg compression (default: 75)
  
  quality 75
  
  
  
  # Type of output images
  
  # Valid values: jpeg, ppm (default: jpeg)
  
  picture_type jpeg
  
  
  
  ############################################################
  
  # FFMPEG related options
  
  # Film (movies) file output, and deinterlacing of the video input
  
  # The options movie_filename and timelapse_filename are also used
  
  # by the ffmpeg feature
  
  ############################################################
  
  
  
  # Use ffmpeg to encode movies in realtime (default: off)
  
  ffmpeg_output_movies on
  
  
  
  # Use ffmpeg to make movies with only the pixels moving
  
  # object (ghost images) (default: off)
  
  ffmpeg_output_debug_movies off
  
  
  
  # Use ffmpeg to encode a timelapse movie
  
  # Default value 0 = off - else save frame every Nth second
  
  ffmpeg_timelapse 0
  
  
  
  # The file rollover mode of the timelapse video
  
  # Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
  
  ffmpeg_timelapse_mode daily
  
  
  
  # Bitrate to be used by the ffmpeg encoder (default: 400000)
  
  # This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
  
  ffmpeg_bps 500000
  
  
  
  # Enables and defines variable bitrate for the ffmpeg encoder.
  
  # ffmpeg_bps is ignored if variable bitrate is enabled.
  
  # Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
  
  # or the range 2 - 31 where 2 means best quality and 31 is worst.
  
  ffmpeg_variable_bitrate 5
  
  
  
  # Codec to used by ffmpeg for the video compression.
  
  # Timelapse mpegs are always made in mpeg1 format independent from this option.
  
  # Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
  
  # mpeg1 - gives you files with extension .mpg
  
  # mpeg4 or msmpeg4 - gives you files with extension .avi
  
  # msmpeg4 is recommended for use with Windows Media Player because
  
  # it requires no installation of codec on the Windows client.
  
  # swf - gives you a flash film with extension .swf
  
  # flv - gives you a flash video with extension .flv
  
  # ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
  
  # mov - QuickTime ( testing )
  
  # ogg - Ogg/Theora ( testing )
  
  #ffmpeg_video_codec msmpeg4
  
  ffmpeg_video_codec mp4
  
  
  
  # Use ffmpeg to deinterlace video. Necessary if you use an analog camera
  
  # and see horizontal combing on moving objects in video or pictures.
  
  # (default: off)
  
  ffmpeg_deinterlace off
  
  
  
  ############################################################
  
  # SDL Window
  
  ############################################################
  
  
  
  # Number of motion thread to show in SDL Window (default: 0 = disabled)
  
  #sdl_threadnr 0
  
  
  
  ############################################################
  
  # External pipe to video encoder
  
  # Replacement for FFMPEG builtin encoder for ffmpeg_output_movies only.
  
  # The options movie_filename and timelapse_filename are also used
  
  # by the ffmpeg feature
  
  #############################################################
  
  
  
  # Bool to enable or disable extpipe (default: off)
  
  use_extpipe off
  
  
  
  # External program (full path and opts) to pipe raw video to
  
  # Generally, use '-' for STDIN...
  
  ;extpipe mencoder -demuxer rawvideo -rawvideo w=320:h=240:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of   avi -o %f.avi - -fps %fps
  
  
  
  
  
  
  
  ############################################################
  
  # Snapshots (Traditional Periodic Webcam File Output)
  
  ############################################################
  
  
  
  # Make automated snapshot every N seconds (default: 0 = disabled)
  
  snapshot_interval 0
  
  
  
  
  
  ############################################################
  
  # Text Display
  
  # %Y = year, %m = month, %d = date,
  
  # %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
  
  # %v = event, %q = frame number, %t = thread (camera) number,
  
  # %D = changed pixels, %N = noise level, \n = new line,
  
  # %i and %J = width and height of motion area,
  
  # %K and %L = X and Y coordinates of motion center
  
  # %C = value defined by text_event - do not use with text_event!
  
  # You can put quotation marks around the text to allow
  
  # leading spaces
  
  ############################################################
  
  
  
  # Locate and draw a box around the moving object.
  
  # Valid values: on, off, preview (default: off)
  
  # Set to 'preview' will only draw a box in preview_shot pictures.
  
  locate_motion_mode off
  
  
  
  # Set the look and style of the locate box if enabled.
  
  # Valid values: box, redbox, cross, redcross (default: box)
  
  # Set to 'box' will draw the traditional box.
  
  # Set to 'redbox' will draw a red box.
  
  # Set to 'cross' will draw a little cross to mark center.
  
  # Set to 'redcross' will draw a little red cross to mark center.
  
  locate_motion_style box
  
  
  
  # Draws the timestamp using same options as C function strftime(3)
  
  # Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
  
  # Text is placed in lower right corner
  
  text_right %d.%m.%Y\n%T
  
  
  
  # Draw a user defined text on the images using same options as C function strftime(3)
  
  # Default: Not defined = no text
  
  # Text is placed in lower left corner
  
  ; text_left CAMERA %t
  
  text_left HofCam
  
  
  
  # Draw the number of changed pixed on the images (default: off)
  
  # Will normally be set to off except when you setup and adjust the motion settings
  
  # Text is placed in upper right corner
  
  text_changes off
  
  
  
  # This option defines the value of the special event conversion specifier %C
  
  # You can use any conversion specifier in this option except %C. Date and time
  
  # values are from the timestamp of the first image in the current event.
  
  # Default: %Y%m%d%H%M%S
  
  # The idea is that %C can be used filenames and text_left/right for creating
  
  # a unique identifier for each event.
  
  text_event %Y%m%d%H%M%S
  
  
  
  # Draw characters at twice normal size on images. (default: off)
  
  text_double on
  
  
  
  
  
  # Text to include in a JPEG EXIF comment
  
  # May be any text, including conversion specifiers.
  
  # The EXIF timestamp is included independent of this text.
  
  ;exif_text %i%J/%K%L
  
  
  
  ############################################################
  
  # Target Directories and filenames For Images And Films
  
  # For the options snapshot_, picture_, movie_ and timelapse_filename
  
  # you can use conversion specifiers
  
  # %Y = year, %m = month, %d = date,
  
  # %H = hour, %M = minute, %S = second,
  
  # %v = event, %q = frame number, %t = thread (camera) number,
  
  # %D = changed pixels, %N = noise level,
  
  # %i and %J = width and height of motion area,
  
  # %K and %L = X and Y coordinates of motion center
  
  # %C = value defined by text_event
  
  # Quotation marks round string are allowed.
  
  ############################################################
  
  
  
  # Target base directory for pictures and films
  
  # Recommended to use absolute path. (Default: current working directory)
  
  target_dir /home/pi
  
  
  
  # File path for snapshots (jpeg or ppm) relative to target_dir
  
  # Default: %v-%Y%m%d%H%M%S-snapshot
  
  # Default value is equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
  
  # File extension .jpg or .ppm is automatically added so do not include this.
  
  # Note: A symbolic link called lastsnap.jpg created in the target_dir will always
  
  # point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
  
  snapshot_filename %v-%Y%m%d%H%M%S-snapshot
  
  
  
  # File path for motion triggered images (jpeg or ppm) relative to target_dir
  
  # Default: %v-%Y%m%d%H%M%S-%q
  
  # Default value is equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
  
  # File extension .jpg or .ppm is automatically added so do not include this
  
  # Set to 'preview' together with best-preview feature enables special naming
  
  # convention for preview shots. See motion guide for details
  
  picture_filename %v-%Y%m%d%H%M%S-%q
  
  
  
  # File path for motion triggered ffmpeg films (movies) relative to target_dir
  
  # Default: %v-%Y%m%d%H%M%S
  
  # Default value is equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
  
  # File extension .mpg or .avi is automatically added so do not include this
  
  # This option was previously called ffmpeg_filename
  
  movie_filename %v-%Y%m%d%H%M%S
  
  
  
  # File path for timelapse movies relative to target_dir
  
  # Default: %Y%m%d-timelapse
  
  # Default value is near equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
  
  # File extension .mpg is automatically added so do not include this
  
  timelapse_filename %Y%m%d-timelapse
  
  
  
  ############################################################
  
  # Global Network Options
  
  ############################################################
  
  # Enable or disable IPV6 for http control and stream (default: off )
  
  ipv6_enabled off
  
  
  
  ############################################################
  
  # Live Stream Server
  
  ############################################################
  
  
  
  # The mini-http server listens to this port for requests (default: 0 = disabled)
  
  stream_port 8080
  
  
  
  # Quality of the jpeg (in percent) images produced (default: 50)
  
  stream_quality 50
  
  
  
  # Output frames at 1 fps when no motion is detected and increase to the
  
  # rate given by stream_maxrate when motion is detected (default: off)
  
  stream_motion on
  
  
  
  # Maximum framerate for stream streams (default: 1)
  
  stream_maxrate 4
  
  
  
  # Restrict stream connections to localhost only (default: on)
  
  stream_localhost off
  
  
  
  # Limits the number of images per connection (default: 0 = unlimited)
  
  # Number can be defined by multiplying actual stream rate by desired number of seconds
  
  # Actual stream rate is the smallest of the numbers framerate and stream_maxrate
  
  stream_limit 0
  
  
  
  # Set the authentication method (default: 0)
  
  # 0 = disabled
  
  # 1 = Basic authentication
  
  # 2 = MD5 digest (the safer authentication)
  
  stream_auth_method 0
  
  
  
  # Authentication for the stream. Syntax username:password
  
  # Default: not defined (Disabled)
  
  ; stream_authentication username:password
  
  
  
  
  
  ############################################################
  
  # HTTP Based Control
  
  ############################################################
  
  
  
  # TCP/IP port for the http server to listen on (default: 0 = disabled)
  
  webcontrol_port 8081
  
  
  
  # Restrict control connections to localhost only (default: on)
  
  webcontrol_localhost off
  
  
  
  # Output for http server, select off to choose raw text plain (default: on)
  
  webcontrol_html_output on
  
  
  
  # Authentication for the http based control. Syntax username:password
  
  # Default: not defined (Disabled)
  
  ; webcontrol_authentication username:password
  
  
  
  
  
  ############################################################
  
  # Tracking (Pan/Tilt)
  
  #############################################################
  
  
  
  # Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo, 6=servo)
  
  # The generic type enables the definition of motion center and motion size to
  
  # be used with the conversion specifiers for options like on_motion_detected
  
  track_type 0
  
  
  
  # Enable auto tracking (default: off)
  
  track_auto off
  
  
  
  # Serial port of motor (default: none)
  
  ;track_port /dev/ttyS0
  
  
  
  # Motor number for x-axis (default: 0)
  
  ;track_motorx 0
  
  
  
  # Set motorx reverse (default: 0)
  
  ;track_motorx_reverse 0
  
  
  
  # Motor number for y-axis (default: 0)
  
  ;track_motory 1
  
  
  
  # Set motory reverse (default: 0)
  
  ;track_motory_reverse 0
  
  
  
  # Maximum value on x-axis (default: 0)
  
  ;track_maxx 200
  
  
  
  # Minimum value on x-axis (default: 0)
  
  ;track_minx 50
  
  
  
  # Maximum value on y-axis (default: 0)
  
  ;track_maxy 200
  
  
  
  # Minimum value on y-axis (default: 0)
  
  ;track_miny 50
  
  
  
  # Center value on x-axis (default: 0)
  
  ;track_homex 128
  
  
  
  # Center value on y-axis (default: 0)
  
  ;track_homey 128
  
  
  
  # ID of an iomojo camera if used (default: 0)
  
  track_iomojo_id 0
  
  
  
  # Angle in degrees the camera moves per step on the X-axis
  
  # with auto-track (default: 10)
  
  # Currently only used with pwc type cameras
  
  track_step_angle_x 10
  
  
  
  [...]