
Recherche avancée
Médias (1)
-
Rennes Emotion Map 2010-11
19 octobre 2011, par
Mis à jour : Juillet 2013
Langue : français
Type : Texte
Autres articles (88)
-
MediaSPIP 0.1 Beta version
25 avril 2011, parMediaSPIP 0.1 beta is the first version of MediaSPIP proclaimed as "usable".
The zip file provided here only contains the sources of MediaSPIP in its standalone version.
To get a working installation, you must manually install all-software dependencies on the server.
If you want to use this archive for an installation in "farm mode", you will also need to proceed to other manual (...) -
MediaSPIP version 0.1 Beta
16 avril 2011, parMediaSPIP 0.1 beta est la première version de MediaSPIP décrétée comme "utilisable".
Le fichier zip ici présent contient uniquement les sources de MediaSPIP en version standalone.
Pour avoir une installation fonctionnelle, il est nécessaire d’installer manuellement l’ensemble des dépendances logicielles sur le serveur.
Si vous souhaitez utiliser cette archive pour une installation en mode ferme, il vous faudra également procéder à d’autres modifications (...) -
La gestion des forums
3 novembre 2011, parSi les forums sont activés sur le site, les administrateurs ont la possibilité de les gérer depuis l’interface d’administration ou depuis l’article même dans le bloc de modification de l’article qui se trouve dans la navigation de la page.
Accès à l’interface de modération des messages
Lorsqu’il est identifié sur le site, l’administrateur peut procéder de deux manières pour gérer les forums.
S’il souhaite modifier (modérer, déclarer comme SPAM un message) les forums d’un article particulier, il a à sa (...)
Sur d’autres sites (11232)
-
How do you set up carrierwave-video with ffmpeg ?
24 septembre 2013, par MaleckaiThis has been doing my head in for the past 2 days, and I just cannot seem to get it working.
I am building a simple Rails app with the sole purpose of uploading & processing images and videos. I'm working on Ubuntu Linux.
Here's the relevant gems in my Gemfile :
gem 'delayed_job_active_record'
gem 'carrierwave'
gem 'carrierwave-video'
gem 'carrierwave_backgrounder'
gem 'mini_magick'
gem 'streamio-ffmpeg'At first I was having problems with ffmpeg complaining about certain arguments (I determined this by taking the command the rails app attempted to run when it was to convert a video, and running it manually outside rails), which I discovered was because the version of ffmpeg I was using was 'too new'. So I downgraded to 1.2.1, which is what streamio-ffmpeg says is the only version of ffmpeg they're tested against.
After that, I could run the command manually, fine. But whenever I tried to convert through the app, I'd get the error :
Failed to transcode with FFmpeg. Check ffmpeg install and verify video is not corrupt or cut short. Original error: nil is not a symbol
I did a bit of Googling on the error, and only came up with one relevant result, but nothing in there has helped my situation.
I'm at a total loss at this point, and am not sure where I can go from here. I assume many of people have tried this before, so I'm hoping someone can guide me on the exact steps they took to get carrierwave-video & ffmpeg working together.
-
Replicate the format of a video to another
10 octobre 2017, par BasjLet’s say I have :
-
video1.avi
which is perfectly played (both sound and image) on my TV’s USB media input -
video2.avi
which is not recognized by the TV : "Imposible to read this format"
I have tried lots of solutions, like :
ffmpeg -i video2.avi -codec:a libmp3lame -q:a 0 -ac 2 -ar 48000 -joint_stereo 0^
-codec:v libxvid -q:v 25 video2_reencoded.aviand when I compare
video1.avi
withvideo2_reencoded.avi
with MediaInfo, they look similar in most aspects, but finally the TV won’t playvideo2_reencoded.avi
.Is there a way with
ffmpeg
, to replicate all the specifications ofvideo1.avi
(sound encoding properties, video encoding properties, image size, container type, etc.) onvideo2.avi
?
Appendix : output of MediaInfo for the three videos. In this specific example,
video2.avi
andvideo2_reencoded.avi
are half-working : image ok but not the sound. In other video examples I tried,video2.avi
andvideo2_reencoded.avi
would be both totally "Impossible to read".video1.avi
(i.e. working)Format : AVI
Format/Info : Audio Video Interleave
File size : 352 MiB
Duration : 51 min 22 s
Overall bit rate : 959 kb/s
Writing application : VirtualDubMod 1.5.10.3 | ... || (build 2550/release)
Writing library : VirtualDubMod build 2550/release
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings : BVOP1
Format settings, BVOP : 1
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (MPEG)
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 51 min 22 s
Bit rate : 821 kb/s
Width : 720 pixels
Height : 400 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.114
Stream size : 302 MiB (86%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Codec ID : 55
Codec ID/Hint : MP3
Duration : 51 min 22 s
Bit rate mode : Constant
Bit rate : 128 kb/s
Channel(s) : 2 channels
Sampling rate : 48.0 kHz
Compression mode : Lossy
Stream size : 47.0 MiB (13%)
Alignment : Aligned on interleaves
Interleave, duration : 40 ms (1.00 video frame)
Interleave, preload duration : 504 ms
Writing library : LAME3.99r
Encoding settings : -m s -V 4 -q 2 -lowpass 17 -b 128video2.avi
(i.e. non-working)Format : AVI
Format/Info : Audio Video Interleave
File size : 1.37 GiB
Duration : 2 h 12 min
Overall bit rate : 1 478 kb/s
Writing application : VirtualDubMod 1.5.10.2 Fr | ... || (build 2540/release)
Writing library : VirtualDubMod build 2540/release
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings : BVOP1
Format settings, BVOP : 1
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Muxing mode : Packed bitstream
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 2 h 12 min
Bit rate : 1 084 kb/s
Width : 624 pixels
Height : 368 pixels
Display aspect ratio : 5:3
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.189
Stream size : 1.00 GiB (73%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio
ID : 1
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : 2000
Duration : 2 h 12 min
Bit rate mode : Constant
Bit rate : 384 kb/s
Channel(s) : 6 channels
Sampling rate : 48.0 kHz
Compression mode : Lossy
Stream size : 364 MiB (26%)
Alignment : Split accross interleaves
Interleave, duration : 40 ms (1.00 video frame)
Interleave, preload duration : 512 msvideo2_reencoded.avi
(i.e. non-working, reencoded, but still non-working)Format : AVI
Format/Info : Audio Video Interleave
Format profile : OpenDML
File size : 1.13 GiB
Duration : 2 h 12 min
Overall bit rate : 1 227 kb/s
Writing application : Lavf57.26.100
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings : BVOP1
Format settings, BVOP : 1
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Muxing mode : Packed bitstream
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 2 h 12 min
Bit rate : 1 084 kb/s
Width : 624 pixels
Height : 368 pixels
Display aspect ratio : 5:3
Frame rate : 25.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.189
Stream size : 1.00 GiB (88%)
Writing library : XviD 1.2.1 (UTC 2008-12-04)
Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Codec ID : 55
Codec ID/Hint : MP3
Duration : 2 h 12 min
Bit rate mode : Constant
Bit rate : 128 kb/s
Channel(s) : 2 channels
Sampling rate : 48.0 kHz
Compression mode : Lossy
Stream size : 120 MiB (10%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.60 video frame) -
-
Encoding using videotoolbox and decoding same data using ffmpeg
26 octobre 2017, par PR SinghI am working on encoding and decoding programme. I
found videotoolbox on Mac OSX for encoding and decoding.So, by using videotoolbox, i am able to do both the task easily but facing issue with decode using FFMpeg.So basically my problem is—Encoding via Videotoolbox and decoding via FFMpeg
I have scratched my head, looked around the internet, didn’t get any solution since 4 days, not even hint,Any help will be appreciable