Recherche avancée

Médias (1)

Mot : - Tags -/stallman

Autres articles (57)

  • Demande de création d’un canal

    12 mars 2010, par

    En fonction de la configuration de la plateforme, l’utilisateur peu avoir à sa disposition deux méthodes différentes de demande de création de canal. La première est au moment de son inscription, la seconde, après son inscription en remplissant un formulaire de demande.
    Les deux manières demandent les mêmes choses fonctionnent à peu près de la même manière, le futur utilisateur doit remplir une série de champ de formulaire permettant tout d’abord aux administrateurs d’avoir des informations quant à (...)

  • MediaSPIP v0.2

    21 juin 2013, par

    MediaSPIP 0.2 est la première version de MediaSPIP stable.
    Sa date de sortie officielle est le 21 juin 2013 et est annoncée ici.
    Le fichier zip ici présent contient uniquement les sources de MediaSPIP en version standalone.
    Comme pour la version précédente, il est nécessaire d’installer manuellement l’ensemble des dépendances logicielles sur le serveur.
    Si vous souhaitez utiliser cette archive pour une installation en mode ferme, il vous faudra également procéder à d’autres modifications (...)

  • MediaSPIP version 0.1 Beta

    16 avril 2011, par

    MediaSPIP 0.1 beta est la première version de MediaSPIP décrétée comme "utilisable".
    Le fichier zip ici présent contient uniquement les sources de MediaSPIP en version standalone.
    Pour avoir une installation fonctionnelle, il est nécessaire d’installer manuellement l’ensemble des dépendances logicielles sur le serveur.
    Si vous souhaitez utiliser cette archive pour une installation en mode ferme, il vous faudra également procéder à d’autres modifications (...)

Sur d’autres sites (12974)

  • Evolution #3820 : modération des inscriptions de rédacteur

    5 septembre 2016, par b b

    Quelques remarques que je postais sur IRC à ce sujet :

    Ça fait chier, on va devoir ajouter une chaîne de langue, du coup ça ne sera pas reportable en 3.0 et 2.1.

    Techniquement, on doit pouvoir tout gérer depuis action/inscrire_auteur, le plan :

    • toujours envoyer le mail de confirmation au nouvel auteur, mais sans le lien de confirmation dedans
    • envoyer le mail de confirmation avec le lien de validation aux admins

    Par contre, si on a pas de page de gestion des inscriptions en attente, ça va être la merde à gérer. Si un admin ne reçoit pas le mail de confirmation ou qu’il passe dans ses spams, comment il fait pour valider le compte en attente ?

    Je ne suis pas certain que ça soit une modif mineure.

  • FFmpeg pseudocolor filter - Option 'p' not found Error initializing filter 'pseudocolor' with args 'p=inferno'

    5 février 2023, par Greynol4

    I'm trying to process output from a uvc camera using ffmpeg. The original command that I was given that works on another linux distribution is :

    


    ffmpeg -input_format yuyv422 -video_size 256x384 -i /dev/video0 -vf 'crop=h=(ih/2):y=(ih/2)' -pix_fmt yuyv422 -f rawvideo - | ffplay -pixel_format gray16le -video_size 256x192 -f rawvideo -i - -vf 'normalize=smoothing=10, format=pix_fmts=rgb48, pseudocolor=p=inferno'

    


    (yes it works on his machine, I've seen the screen capture)

    


    I can get everything but the pseudocolor filter to work and this command works fine if i just delete , pseudocolor=p=inferno

    


    This is for processing the stream from a thermal camera that outputs raw data as video which necessitates the cropping and processing and is also why the resolution is so low.

    


    No matter what I do, it throws - Option 'p' not found Error initializing filter 'pseudocolor' with args 'p=inferno' \[rawvideo @ 0x625007a0\] Packet corrupt (stream = 0, dts = 3).=0/0 
I have modified it for my needs but I still cant get the pseudocolor filter to use the presets.

    


    The full configuration and output are below. This is a raspberry pi 3B+ running bullseye that I've reinstalled multiple times without resolution of this problem.

    


    


    `ffmpeg version 4.3.5-0+deb11u1+rpt3 Copyright (c) 2000-2022 the FFmpeg developers
built with gcc 10 (Raspbian 10.2.1-6+rpi1)
configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —enable-shared —libdir=/usr/lib/arm-linux-gnueabihf —cpu=arm1176jzf-s —arch=arm
WARNING : library configuration mismatch
avutil configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
avcodec configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
avformat configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
avdevice configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
avfilter configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
avresample configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
swscale configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
swresample configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
postproc configuration : —prefix=/usr —extra-version=0+deb11u1+rpt3 —toolchain=hardened —incdir=/usr/include/arm-linux-gnueabihf —enable-gpl —disable-stripping —enable-avresample —disable-filter=resample —enable-gnutls —enable-ladspa —enable-libaom —enable-libass —enable-libbluray —enable-libbs2b —enable-libcaca —enable-libcdio —enable-libcodec2 —enable-libdav1d —enable-libflite —enable-libfontconfig —enable-libfreetype —enable-libfribidi —enable-libgme —enable-libgsm —enable-libjack —enable-libmp3lame —enable-libmysofa —enable-libopenjpeg —enable-libopenmpt —enable-libopus —enable-libpulse —enable-librabbitmq —enable-librsvg —enable-librubberband —enable-libshine —enable-libsnappy —enable-libsoxr —enable-libspeex —enable-libsrt —enable-libssh —enable-libtheora —enable-libtwolame —enable-libvidstab —enable-libvorbis —enable-libvpx —enable-libwavpack —enable-libwebp —enable-libx265 —enable-libxml2 —enable-libxvid —enable-libzmq —enable-libzvbi —enable-lv2 —enable-omx —enable-openal —enable-opencl —enable-opengl —enable-sdl2 —enable-mmal —enable-neon —enable-rpi —enable-v4l2-request —enable-libudev —enable-epoxy —enable-pocketsphinx —enable-libdc1394 —enable-libdrm —enable-vout-drm —enable-libiec61883 —enable-chromaprint —enable-frei0r —enable-libx264 —libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp —cpu=cortex-a7 —arch=armv6t2 —disable-thumb —enable-shared —disable-doc —disable-programs
libavutil 56. 51.100 / 56. 51.100
libavcodec 58. 91.100 / 58. 91.100
libavformat 58. 45.100 / 58. 45.100
libavdevice 58. 10.100 / 58. 10.100
libavfilter 7. 85.100 / 7. 85.100
libavresample 4. 0. 0 / 4. 0. 0
libswscale 5. 7.100 / 5. 7.100
libswresample 3. 7.100 / 3. 7.100
libpostproc 55. 7.100 / 55. 7.100
Input #0, video4linux2,v4l2, from '/dev/video0':B sq= 0B f=0/0
    
Duration : N/A, start : 25563.182409, bitrate : 39321 kb/s
Stream #0:0 : Video : rawvideo (YUY2 / 0x32595559), yuyv422, 256x384, 39321 kb/s, 25 fps, 25 tbr, 1000k tbn, 1000k tbc
Stream mapping :
Stream #0:0 -> #0:0 (rawvideo (native) -> rawvideo (native))
Press [q] to stop, [?] for help
Output #0, rawvideo, to 'pipe :' :
Metadata :
encoder : Lavf58.45.100
Stream #0:0 : Video : rawvideo (YUY2 / 0x32595559), yuyv422, 256x192, q=2-31, 19660 kb/s, 25 fps, 25 tbn, 25 tbc
Metadata :
encoder : Lavc58.91.100 rawvideo
Input #0, rawvideo, from 'pipe :' : 0KB vq= 0KB sq= 0B f=0/0
    
Duration : N/A, start : 0.000000, bitrate : 19660 kb/s
Stream #0:0 : Video : rawvideo (Y1[0][16] / 0x10003159), gray16le, 256x192, 19660 kb/s, 25 tbr, 25 tbn, 25 tbc
[Parsed_pseudocolor_2 @ 0x62f02760] Option 'p' not found
Error initializing filter 'pseudocolor' with args 'p=inferno'
[rawvideo @ 0x625007a0] Packet corrupt (stream = 0, dts = 1).

    


    av_interleaved_write_frame() : Broken pipe
Error writing trailer of pipe: : Broken pipe
frame= 3 fps=0.0 q=-0.0 Lsize= 224kB time=00:00:00.12 bitrate=15291.7kbits/s speed=0.977x
    
video:288kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead : unknown
Conversion failed !`

    


    


    The examples for the presets in the documentation are lacking but that makes me think that it shouldn't be giving this much trouble and I'm overlooking something.

    


    I plan on integrating this but can't until I can proceed with this proof of concept.

    


    Thanks for any help !

    


  • How does a video editor app do fast realtime rendering ? [closed]

    14 février 2023, par aya Cangtip

    I plan to make a video editor using the Flutter framework, but I'm still having trouble doing realtime rendering. How do I do fast realtime rendering ?

    


Navigation