Recherche avancée

Médias (0)

Mot : - Tags -/presse-papier

Aucun média correspondant à vos critères n’est disponible sur le site.

Autres articles (102)

  • MediaSPIP v0.2

    21 juin 2013, par

    MediaSPIP 0.2 est la première version de MediaSPIP stable.
    Sa date de sortie officielle est le 21 juin 2013 et est annoncée ici.
    Le fichier zip ici présent contient uniquement les sources de MediaSPIP en version standalone.
    Comme pour la version précédente, il est nécessaire d’installer manuellement l’ensemble des dépendances logicielles sur le serveur.
    Si vous souhaitez utiliser cette archive pour une installation en mode ferme, il vous faudra également procéder à d’autres modifications (...)

  • Gestion des droits de création et d’édition des objets

    8 février 2011, par

    Par défaut, beaucoup de fonctionnalités sont limitées aux administrateurs mais restent configurables indépendamment pour modifier leur statut minimal d’utilisation notamment : la rédaction de contenus sur le site modifiables dans la gestion des templates de formulaires ; l’ajout de notes aux articles ; l’ajout de légendes et d’annotations sur les images ;

  • Mise à disposition des fichiers

    14 avril 2011, par

    Par défaut, lors de son initialisation, MediaSPIP ne permet pas aux visiteurs de télécharger les fichiers qu’ils soient originaux ou le résultat de leur transformation ou encodage. Il permet uniquement de les visualiser.
    Cependant, il est possible et facile d’autoriser les visiteurs à avoir accès à ces documents et ce sous différentes formes.
    Tout cela se passe dans la page de configuration du squelette. Il vous faut aller dans l’espace d’administration du canal, et choisir dans la navigation (...)

Sur d’autres sites (14428)

  • ffmpeg performance on raspberry pi

    20 août 2021, par Rudi

    I'm running ffmpeg on a rasperry pi 4. I'm capturing the signal of an usb device.

    


    ffprobes output is :

    


    pi@skycam:~ $ ffprobe /dev/video0
ffprobe version 4.1.4-1+rpt7~deb10u1 Copyright (c) 2007-2019 the FFmpeg developers
  built with gcc 8 (Raspbian 8.3.0-6+rpi1)
  configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared --libdir=/usr/lib/arm-linux-gnueabihf --cpu=arm1176jzf-s --arch=arm
  WARNING: library configuration mismatch
  avutil      configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avcodec     configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avformat    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avdevice    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avfilter    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  avresample  configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  swscale     configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  swresample  configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  postproc    configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1' --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opengl --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7 --arch=armv6t2 --disable-thumb --enable-shared --disable-doc --disable-programs
  libavutil      56. 22.100 / 56. 22.100
  libavcodec     58. 35.100 / 58. 35.100
  libavformat    58. 20.100 / 58. 20.100
  libavdevice    58.  5.100 / 58.  5.100
  libavfilter     7. 40.101 /  7. 40.101
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  3.100 /  5.  3.100
  libswresample   3.  3.100 /  3.  3.100
  libpostproc    55.  3.100 / 55.  3.100
Input #0, video4linux2,v4l2, from '/dev/video0':
  Duration: N/A, start: 1230.660915, bitrate: 1990656 kb/s
    Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 1920x1080, 1990656 kb/s, 60 fps, 60 tbr, 1000k tbn, 1000k tbc


    


    the ffmpeg call i'm using is :

    


    bin/ffmpeg -loglevel quiet -re -f v4l2 -i /dev/video0 -tune zerolatency -preset ultrafast -pix_fmt yuv420p out.mkv


    


    put the framerate starts at around 20 and increases slowly to 36. Also when reviewing the output videos i feel like i see a bit of a framedrop so the video is not as smooth as the input.

    


    Is this due to a lack of power of the raspberry or are there any tweaks i could use to improve performance ? I don't care about the output format, framerate or resolution

    


    thank you very much

    


  • Why is the filesize different when swapping audio tracks using ffmeg ?

    20 août 2021, par Brian

    I have a movie that I have encoded using Handbrake on a Mac a long time ago. When I encoded the movie, I put the stereo audio as track 1 and the 5.1 audio as track 2. The starting filesize is 853,320,914 bytes. Below is the data from ffprobe.

    


    ffprobe version 4.2.1-tessus  https://evermeet.cx/ffmpeg/  Copyright (c) 2007-2019 the FFmpeg developers
  built with Apple LLVM version 10.0.1 (clang-1001.0.46.4)
  configuration: --cc=/usr/bin/clang --prefix=/opt/ffmpeg --extra-version=tessus --enable-avisynth --enable-fontconfig --enable-gpl --enable-libaom --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvmaf --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-version3 --pkg-config-flags=--static --disable-ffplay
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Annabelle - Comes Home (2019).m4v':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-04-06T22:40:36.000000Z
    encoder         : HandBrake 1.1.2 2018090500
  Duration: 01:46:04.86, start: 0.000000, bitrate: 1072 kb/s
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Stereo
    Stream #0:2(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:3(eng): Data: bin_data (text / 0x74786574)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : SubtitleHandler
Unsupported codec with id 100359 for input stream 3


    


    My goal is to swap the stereo audio track with the 5.1 audio track and make the 5.1 audio track the default without having to reencode. To do this, I used the following command :

    


    ffmpeg -i "Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019)_old.m4v" -map 0:v:0 -map 0:a:1 -map 0:a:0 -disposition:a:0 default -disposition:a:1 none -c copy "Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019).m4v"

    


    Everything works as it should, I think anyways as I didn't get any errors...

    


    ffmpeg version 4.2.1-tessus  https://evermeet.cx/ffmpeg/  Copyright (c) 2000-2019 the FFmpeg developers
  built with Apple LLVM version 10.0.1 (clang-1001.0.46.4)
  configuration: --cc=/usr/bin/clang --prefix=/opt/ffmpeg --extra-version=tessus --enable-avisynth --enable-fontconfig --enable-gpl --enable-libaom --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvmaf --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-version3 --pkg-config-flags=--static --disable-ffplay
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019)_old.m4v':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    creation_time   : 2020-04-06T22:40:36.000000Z
    encoder         : HandBrake 1.1.2 2018090500
  Duration: 01:46:04.86, start: 0.000000, bitrate: 1072 kb/s
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Stereo
    Stream #0:2(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:3(eng): Data: bin_data (text / 0x74786574)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : SubtitleHandler
[ipod @ 0x7faff0014000] track 1: codec frame size is not set
Output #0, ipod, to 'Annabelle - Comes Home (2019)/Annabelle - Comes Home (2019).m4v':
  Metadata:
    major_brand     : mp42
    minor_version   : 512
    compatible_brands: isomiso2avc1mp41
    encoder         : Lavf58.29.100
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], q=2-31, 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 90k tbc (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s (default)
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:2(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s
    Metadata:
      creation_time   : 2020-04-06T22:40:36.000000Z
      handler_name    : Stereo
Stream mapping:
  Stream #0:0 -> #0:0 (copy)
  Stream #0:2 -> #0:1 (copy)
  Stream #0:1 -> #0:2 (copy)
Press [q] to stop, [?] for help
frame=152602 fps=12872 q=-1.0 Lsize=  834270kB time=01:46:04.79 bitrate=1073.8kbits/s speed= 537x    
video:403702kB audio:424714kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.706676%


    


    Here is the resulting ffprobe of the new file showing it swapped the audio tracks :

    


    ffprobe version 4.2.1-tessus  https://evermeet.cx/ffmpeg/  Copyright (c) 2007-2019 the FFmpeg developers
  built with Apple LLVM version 10.0.1 (clang-1001.0.46.4)
  configuration: --cc=/usr/bin/clang --prefix=/opt/ffmpeg --extra-version=tessus --enable-avisynth --enable-fontconfig --enable-gpl --enable-libaom --enable-libass --enable-libbluray --enable-libdav1d --enable-libfreetype --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libmysofa --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvmaf --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-libzmq --enable-libzvbi --enable-version3 --pkg-config-flags=--static --disable-ffplay
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Annabelle - Comes Home (2019).m4v':
  Metadata:
    major_brand     : M4V 
    minor_version   : 512
    compatible_brands: isomiso2avc1
    encoder         : Lavf58.29.100
  Duration: 01:46:04.86, start: 0.000000, bitrate: 1073 kb/s
    Chapter #0:0: start 0.000000, end 476.986000
    Metadata:
      title           : Chapter 1
    Chapter #0:1: start 476.986000, end 933.608000
    Metadata:
      title           : Chapter 2
    Chapter #0:2: start 933.608000, end 1441.449000
    Metadata:
      title           : Chapter 3
    Chapter #0:3: start 1441.449000, end 1976.358000
    Metadata:
      title           : Chapter 4
    Chapter #0:4: start 1976.358000, end 2579.753000
    Metadata:
      title           : Chapter 5
    Chapter #0:5: start 2579.753000, end 3149.030000
    Metadata:
      title           : Chapter 6
    Chapter #0:6: start 3149.030000, end 3726.941000
    Metadata:
      title           : Chapter 7
    Chapter #0:7: start 3726.941000, end 3973.520000
    Metadata:
      title           : Chapter 8
    Chapter #0:8: start 3973.520000, end 4504.676000
    Metadata:
      title           : Chapter 9
    Chapter #0:9: start 4504.676000, end 4904.409000
    Metadata:
      title           : Chapter 10
    Chapter #0:10: start 4904.409000, end 5421.592000
    Metadata:
      title           : Chapter 11
    Chapter #0:11: start 5421.592000, end 5998.001000
    Metadata:
      title           : Chapter 12
    Chapter #0:12: start 5998.001000, end 6364.075000
    Metadata:
      title           : Chapter 13
    Stream #0:0(und): Video: h264 (Constrained Baseline) (avc1 / 0x31637661), yuv420p(tv, smpte170m/smpte170m/bt709), 720x360 [SAR 32:27 DAR 64:27], 519 kb/s, 23.98 fps, 23.98 tbr, 90k tbn, 180k tbc (default)
    Metadata:
      handler_name    : VideoHandler
    Stream #0:1(eng): Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 384 kb/s (default)
    Metadata:
      handler_name    : Surround
    Side data:
      audio service type: main
    Stream #0:2(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 162 kb/s
    Metadata:
      handler_name    : Stereo
    Stream #0:3(eng): Data: bin_data (text / 0x74786574)
    Metadata:
      handler_name    : SubtitleHandler
Unsupported codec with id 100359 for input stream 3


    


    What I don't understand is why is the file size different ? The resulting file is larger at 854,292,790 bytes. Shouldn't the file sizes be the same since I literally just swapped tracks 0 and 1 ?

    


  • FFMPEG video merging. Only first video shows

    13 mars 2019, par James Ashworth

    I’m trying to put 7 second intro video before another one, but I keep having trouble with it. I don’t need to do anything else then add intros to videos.

    This is what I’m currently getting.

    (for %i in (*.mp4) do @echo file '%i') > mylist.txt
    

    
ffmpeg -f concat -safe 0 -i mylist.txt -c copy output.mp4
    

    

    

    

    

    
    C:\Users\Business>cd desktop
    

    
C:\Users\Business\Desktop>cd testfile
    

    
C:\Users\Business\Desktop\Testfile>(for %i in (*.mp4) do @echo file '%i') > mylist.txt
    

    
C:\Users\Business\Desktop\Testfile>
    
C:\Users\Business\Desktop\Testfile>(for %i in (*.mp4) do @echo file '%i') > mylist.txt
    

    
C:\Users\Business\Desktop\Testfile>ffmpeg -f concat -i mylist.txt -c copy output.mp4
    
ffmpeg version N-93308-g1144d5c96d Copyright (c) 2000-2019 the FFmpeg developers
    
  built with gcc 8.2.1 (GCC) 20190212
    
  configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libdav1d --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-libvo-amrwbenc --enable-libmysofa --enable-libspeex --enable-libxvid --enable-libaom --enable-libmfx --enable-amf --enable-ffnvcodec --enable-cuvid --enable-d3d11va --enable-nvenc --enable-nvdec --enable-dxva2 --enable-avisynth --enable-libopenmpt  
    

    
libavutil      56. 26.100 / 56. 26.100
    
  libavcodec     58. 47.103 / 58. 47.103
    
  libavformat    58. 26.101 / 58. 26.101
    
  libavdevice    58.  6.101 / 58.  6.101
    
  libavfilter     7. 48.100 /  7. 48.100
    
  libswscale      5.  4.100 /  5.  4.100
    
  libswresample   3.  4.100 /  3.  4.100
    
  libpostproc    55.  4.100 / 55.  4.100
    
[mov,mp4,m4a,3gp,3g2,mj2 @ 00000261c7072c00] Auto-inserting h264_mp4toannexb bitstream filter
    
Input #0, concat, from 'mylist.txt':
    
  Duration: N/A, start: -0.042667, bitrate: 2453 kb/s
    
    Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 1280x720, 2325 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc
    
    Metadata:
    
      handler_name    : VideoHandler
    
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s
    
    Metadata:
    
      handler_name    : SoundHandler
    
Output #0, mp4, to 'output.mp4':
    
  Metadata:
    
    encoder         : Lavf58.26.101
    
    Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 1280x720, q=2-31, 2325 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 30k tbc
    
    Metadata:
    
      handler_name    : VideoHandler
    
    Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s
    
    Metadata:
    
      handler_name    : SoundHandler
    
Stream mapping:
    
  Stream #0:0 -> #0:0 (copy)
    
  Stream #0:1 -> #0:1 (copy)
    
Press [q] to stop, [?] for help
    
frame=110209 fps=3246 q=-1.0 Lsize= 1103461kB time=01:01:17.41 bitrate=2458.1kbits/s speed= 108x
    
video:1042171kB audio:57353kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.358030%
    

    
C:\Users\Business\Desktop\Testfile>

    It shows the 7 second video as the whole video. Someway i got it to change after 7 seconds, but then the rest of the video was really buddy.

Navigation