Recherche avancée

Sur d’autres sites (1558)

• How to get .mp4 videos from motion on a Raspberry Pi ?

  9 octobre 2016, par Maarti

  I use motion on my laptop and it works perfectly in any format. But when I use it on my Raspberry Pi 3 (Raspbian Jessie) with the Raspberry Camera V2, the only formats that work are : .avi and .swf.

  When I choose any other format, the output video is a "0 sec video" that is played and closed instantly.

  I would like to have .mp4 or .ogg output so I can read it easily with HTML5.

  Here is the motion codec documentation.

  Here is my config file :

  ############################################################
  
  # Daemon
  
  ############################################################
  
  
  
  # Start in daemon (background) mode and release terminal (default: off)
  
  daemon on
  
  
  
  # File to store the process ID, also called pid file. (default: not defined)
  
  process_id_file /var/run/motion/motion.pid
  
  
  
  ############################################################
  
  # Basic Setup Mode
  
  ############################################################
  
  
  
  # Start in Setup-Mode, daemon disabled. (default: off)
  
  setup_mode off
  
  
  
  
  
  # Use a file to save logs messages, if not defined stderr and syslog is used. (default: not defined)
  
  #logfile /mnt/camshare/Cam1/motion.log
  
  logfile /tmp/motion.log
  
  
  
  # Level of log messages [1..9] (EMR, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL). (default: 6 / NTC)
  
  log_level 2
  
  
  
  # Filter to log messages by type (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). (default: ALL)
  
  log_type all
  
  
  
  ###########################################################
  
  # Capture device options
  
  ############################################################
  
  
  
  # Videodevice to be used for capturing  (default /dev/video0)
  
  # for FreeBSD default is /dev/bktr0
  
  #videodevice /dev/video0
  
  
  
  # v4l2_palette allows to choose preferable palette to be use by motion
  
  # to capture from those supported by your videodevice. (default: 17)
  
  # E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
  
  # V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
  
  # Setting v4l2_palette to 2 forces motion to use V4L2_PIX_FMT_SBGGR8
  
  # instead.
  
  #
  
  # Values :
  
  # V4L2_PIX_FMT_SN9C10X : 0  'S910'
  
  # V4L2_PIX_FMT_SBGGR16 : 1  'BYR2'
  
  # V4L2_PIX_FMT_SBGGR8  : 2  'BA81'
  
  # V4L2_PIX_FMT_SPCA561 : 3  'S561'
  
  # V4L2_PIX_FMT_SGBRG8  : 4  'GBRG'
  
  # V4L2_PIX_FMT_SGRBG8  : 5  'GRBG'
  
  # V4L2_PIX_FMT_PAC207  : 6  'P207'
  
  # V4L2_PIX_FMT_PJPG    : 7  'PJPG'
  
  # V4L2_PIX_FMT_MJPEG   : 8  'MJPEG'
  
  # V4L2_PIX_FMT_JPEG    : 9  'JPEG'
  
  # V4L2_PIX_FMT_RGB24   : 10 'RGB3'
  
  # V4L2_PIX_FMT_SPCA501 : 11 'S501'
  
  # V4L2_PIX_FMT_SPCA505 : 12 'S505'
  
  # V4L2_PIX_FMT_SPCA508 : 13 'S508'
  
  # V4L2_PIX_FMT_UYVY    : 14 'UYVY'
  
  # V4L2_PIX_FMT_YUYV    : 15 'YUYV'
  
  # V4L2_PIX_FMT_YUV422P : 16 '422P'
  
  # V4L2_PIX_FMT_YUV420  : 17 'YU12'
  
  #
  
  v4l2_palette 7
  
  
  
  # Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
  
  # This is ONLY used for FreeBSD. Leave it commented out for Linux
  
  ; tunerdevice /dev/tuner0
  
  
  
  # The video input to be used (default: -1)
  
  # Should normally be set to 0 or 1 for video/TV cards, and -1 for USB cameras
  
  input -1
  
  
  
  # The video norm to use (only for video capture and TV tuner cards)
  
  # Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
  
  norm 0
  
  
  
  # The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
  
  frequency 0
  
  
  
  # Rotate image this number of degrees. The rotation affects all saved images as
  
  # well as movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
  
  rotate 0
  
  
  
  # Image width (pixels). Valid range: Camera dependent, default: 352
  
  #width 1024
  
  width 640
  
  
  
  # Image height (pixels). Valid range: Camera dependent, default: 288
  
  #height 576
  
  height 480
  
  
  
  # Maximum number of frames to be captured per second.
  
  # Valid range: 2-100. Default: 100 (almost no limit).
  
  framerate 15
  
  
  
  # Minimum time in seconds between capturing picture frames from the camera.
  
  # Default: 0 = disabled - the capture rate is given by the camera framerate.
  
  # This option is used when you want to capture images at a rate lower than 2 per second.
  
  minimum_frame_time 0
  
  
  
  # URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// mjpg:// or file:///)
  
  # Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
  
  ;netcam_url http://127.0.0.1/cgi-bin/raspicam.sh
  
  
  
  # Username and password for network camera (only if required). Default: not defined
  
  # Syntax is user:password
  
  ; netcam_userpass value
  
  
  
  # The setting for keep-alive of network socket, should improve performance on compatible net cameras.
  
  # off:   The historical implementation using HTTP/1.0, closing the socket after each http request.
  
  # force: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
  
  # on:    Use HTTP/1.1 requests that support keep alive as default.
  
  # Default: off
  
  netcam_keepalive off
  
  
  
  # URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
  
  # If a port number other than 80 is needed, use "http://myproxy:1234".
  
  # Default: not defined
  
  ; netcam_proxy value
  
  
  
  # Set less strict jpeg checks for network cameras with a poor/buggy firmware.
  
  # Default: off
  
  netcam_tolerant_check off
  
  
  
  # Let motion regulate the brightness of a video device (default: off).
  
  # The auto_brightness feature uses the brightness option as its target value.
  
  # If brightness is zero auto_brightness will adjust to average brightness value 128.
  
  # Only recommended for cameras without auto brightness
  
  auto_brightness off
  
  
  
  # Set the initial brightness of a video device.
  
  # If auto_brightness is enabled, this value defines the average brightness level
  
  # which Motion will try and adjust to.
  
  # Valid range 0-255, default 0 = disabled
  
  brightness 0
  
  
  
  # Set the contrast of a video device.
  
  # Valid range 0-255, default 0 = disabled
  
  contrast 0
  
  
  
  # Set the saturation of a video device.
  
  # Valid range 0-255, default 0 = disabled
  
  saturation 0
  
  
  
  # Set the hue of a video device (NTSC feature).
  
  # Valid range 0-255, default 0 = disabled
  
  hue 0
  
  
  
  ############################################################
  
  # File "camera" support - read raw YUV data from a file
  
  ############################################################
  
  #filecam_path /home/pi/test-cap/motion-mmal.capture
  
  
  
  ############################################################
  
  # OpenMax/MMAL camera support for Raspberry Pi
  
  ############################################################
  
  mmalcam_name vc.ril.camera
  
  #mmalcam_control_params
  
  #mmalcam_raw_capture_file /home/pi/motion-mmal.capture
  
  
  
  # Switch this setting to "on" to use the still image mode of the Pi's camera
  
  # instead of video. This gives a wider field of view, but requires
  
  # a much slower frame-rate to achieve exposure stability
  
  # (e.g. 0.25 fps or slower). You can use the minimum_frame_time
  
  # parameter above to achieve this
  
  
  
  mmalcam_use_still off
  
  
  
  
  
  ############################################################
  
  # Round Robin (multiple inputs on same video device name)
  
  ############################################################
  
  
  
  # Number of frames to capture in each roundrobin step (default: 1)
  
  roundrobin_frames 1
  
  
  
  # Number of frames to skip before each roundrobin step (default: 1)
  
  roundrobin_skip 1
  
  
  
  # Try to filter out noise generated by roundrobin (default: off)
  
  switchfilter off
  
  
  
  
  
  ############################################################
  
  # Motion Detection Settings:
  
  ############################################################
  
  
  
  # Threshold for number of changed pixels in an image that
  
  # triggers motion detection (default: 1500)
  
  threshold 1500
  
  
  
  # Automatically tune the threshold down if possible (default: off)
  
  threshold_tune off
  
  
  
  # Noise threshold for the motion detection (default: 32)
  
  noise_level 32
  
  
  
  # Automatically tune the noise threshold (default: on)
  
  noise_tune on
  
  
  
  # Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
  
  # Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
  
  # (l)abeling must only be used once and the 'l' must be the last letter.
  
  # Comment out to disable
  
  despeckle_filter EedDl
  
  
  
  # Detect motion in predefined areas (1 - 9). Areas are numbered like that:  1 2 3
  
  # A script (on_area_detected) is started immediately when motion is         4 5 6
  
  # detected in one of the given areas, but only once during an event.        7 8 9
  
  # One or more areas can be specified with this option. Take care: This option
  
  # does NOT restrict detection to these areas! (Default: not defined)
  
  ; area_detect value
  
  
  
  # PGM file to use as a sensitivity mask.
  
  # Full path name to. (Default: not defined)
  
  ; mask_file value
  
  
  
  # Dynamically create a mask file during operation (default: 0)
  
  # Adjust speed of mask changes from 0 (off) to 10 (fast)
  
  smart_mask_speed 0
  
  
  
  # Ignore sudden massive light intensity changes given as a percentage of the picture
  
  # area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
  
  lightswitch 0
  
  
  
  # Picture frames must contain motion at least the specified number of frames
  
  # in a row before they are detected as true motion. At the default of 1, all
  
  # motion is detected. Valid range: 1 to thousands, recommended 1-5
  
  minimum_motion_frames 1
  
  
  
  # Specifies the number of pre-captured (buffered) pictures from before motion
  
  # was detected that will be output at motion detection.
  
  # Recommended range: 0 to 5 (default: 0)
  
  # Do not use large values! Large values will cause Motion to skip video frames and
  
  # cause unsmooth movies. To smooth movies use larger values of post_capture instead.
  
  pre_capture 2
  
  
  
  # Number of frames to capture after motion is no longer detected (default: 0)
  
  post_capture 2
  
  
  
  # Event Gap is the seconds of no motion detection that triggers the end of an event.
  
  # An event is defined as a series of motion images taken within a short timeframe.
  
  # Recommended value is 60 seconds (Default). The value -1 is allowed and disables
  
  # events causing all Motion to be written to one single movie file and no pre_capture.
  
  # If set to 0, motion is running in gapless mode. Movies don't have gaps anymore. An
  
  # event ends right after no more motion is detected and post_capture is over.
  
  event_gap 60
  
  
  
  # Maximum length in seconds of an mpeg movie
  
  # When value is exceeded a new movie file is created. (Default: 0 = infinite)
  
  # ATTENTION: when you're not using the motion build from the tutorial, it might fail with error 'Unknown config option "max_mpeg_time"'
  
  # the use this line instead:
  
  # max_movie_time 60
  
  max_movie_time 60
  
  
  
  # Always save images even if there was no motion (default: off)
  
  emulate_motion off
  
  
  
  
  
  ############################################################
  
  # Image File Output
  
  ############################################################
  
  
  
  # Output 'normal' pictures when motion is detected (default: on)
  
  # Valid values: on, off, first, best, center
  
  # When set to 'first', only the first picture of an event is saved.
  
  # Picture with most motion of an event is saved when set to 'best'.
  
  # Picture with motion nearest center of picture is saved when set to 'center'.
  
  # Can be used as preview shot for the corresponding movie.
  
  output_pictures best
  
  
  
  # Output pictures with only the pixels moving object (ghost images) (default: off)
  
  output_debug_pictures off
  
  
  
  # The quality (in percent) to be used by the jpeg compression (default: 75)
  
  quality 75
  
  
  
  # Type of output images
  
  # Valid values: jpeg, ppm (default: jpeg)
  
  picture_type jpeg
  
  
  
  ############################################################
  
  # FFMPEG related options
  
  # Film (movies) file output, and deinterlacing of the video input
  
  # The options movie_filename and timelapse_filename are also used
  
  # by the ffmpeg feature
  
  ############################################################
  
  
  
  # Use ffmpeg to encode movies in realtime (default: off)
  
  ffmpeg_output_movies on
  
  
  
  # Use ffmpeg to make movies with only the pixels moving
  
  # object (ghost images) (default: off)
  
  ffmpeg_output_debug_movies off
  
  
  
  # Use ffmpeg to encode a timelapse movie
  
  # Default value 0 = off - else save frame every Nth second
  
  ffmpeg_timelapse 0
  
  
  
  # The file rollover mode of the timelapse video
  
  # Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
  
  ffmpeg_timelapse_mode daily
  
  
  
  # Bitrate to be used by the ffmpeg encoder (default: 400000)
  
  # This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
  
  ffmpeg_bps 500000
  
  
  
  # Enables and defines variable bitrate for the ffmpeg encoder.
  
  # ffmpeg_bps is ignored if variable bitrate is enabled.
  
  # Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
  
  # or the range 2 - 31 where 2 means best quality and 31 is worst.
  
  ffmpeg_variable_bitrate 5
  
  
  
  # Codec to used by ffmpeg for the video compression.
  
  # Timelapse mpegs are always made in mpeg1 format independent from this option.
  
  # Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
  
  # mpeg1 - gives you files with extension .mpg
  
  # mpeg4 or msmpeg4 - gives you files with extension .avi
  
  # msmpeg4 is recommended for use with Windows Media Player because
  
  # it requires no installation of codec on the Windows client.
  
  # swf - gives you a flash film with extension .swf
  
  # flv - gives you a flash video with extension .flv
  
  # ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
  
  # mov - QuickTime ( testing )
  
  # ogg - Ogg/Theora ( testing )
  
  #ffmpeg_video_codec msmpeg4
  
  ffmpeg_video_codec mp4
  
  
  
  # Use ffmpeg to deinterlace video. Necessary if you use an analog camera
  
  # and see horizontal combing on moving objects in video or pictures.
  
  # (default: off)
  
  ffmpeg_deinterlace off
  
  
  
  ############################################################
  
  # SDL Window
  
  ############################################################
  
  
  
  # Number of motion thread to show in SDL Window (default: 0 = disabled)
  
  #sdl_threadnr 0
  
  
  
  ############################################################
  
  # External pipe to video encoder
  
  # Replacement for FFMPEG builtin encoder for ffmpeg_output_movies only.
  
  # The options movie_filename and timelapse_filename are also used
  
  # by the ffmpeg feature
  
  #############################################################
  
  
  
  # Bool to enable or disable extpipe (default: off)
  
  use_extpipe off
  
  
  
  # External program (full path and opts) to pipe raw video to
  
  # Generally, use '-' for STDIN...
  
  ;extpipe mencoder -demuxer rawvideo -rawvideo w=320:h=240:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of   avi -o %f.avi - -fps %fps
  
  
  
  
  
  
  
  ############################################################
  
  # Snapshots (Traditional Periodic Webcam File Output)
  
  ############################################################
  
  
  
  # Make automated snapshot every N seconds (default: 0 = disabled)
  
  snapshot_interval 0
  
  
  
  
  
  ############################################################
  
  # Text Display
  
  # %Y = year, %m = month, %d = date,
  
  # %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
  
  # %v = event, %q = frame number, %t = thread (camera) number,
  
  # %D = changed pixels, %N = noise level, \n = new line,
  
  # %i and %J = width and height of motion area,
  
  # %K and %L = X and Y coordinates of motion center
  
  # %C = value defined by text_event - do not use with text_event!
  
  # You can put quotation marks around the text to allow
  
  # leading spaces
  
  ############################################################
  
  
  
  # Locate and draw a box around the moving object.
  
  # Valid values: on, off, preview (default: off)
  
  # Set to 'preview' will only draw a box in preview_shot pictures.
  
  locate_motion_mode off
  
  
  
  # Set the look and style of the locate box if enabled.
  
  # Valid values: box, redbox, cross, redcross (default: box)
  
  # Set to 'box' will draw the traditional box.
  
  # Set to 'redbox' will draw a red box.
  
  # Set to 'cross' will draw a little cross to mark center.
  
  # Set to 'redcross' will draw a little red cross to mark center.
  
  locate_motion_style box
  
  
  
  # Draws the timestamp using same options as C function strftime(3)
  
  # Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
  
  # Text is placed in lower right corner
  
  text_right %d.%m.%Y\n%T
  
  
  
  # Draw a user defined text on the images using same options as C function strftime(3)
  
  # Default: Not defined = no text
  
  # Text is placed in lower left corner
  
  ; text_left CAMERA %t
  
  text_left HofCam
  
  
  
  # Draw the number of changed pixed on the images (default: off)
  
  # Will normally be set to off except when you setup and adjust the motion settings
  
  # Text is placed in upper right corner
  
  text_changes off
  
  
  
  # This option defines the value of the special event conversion specifier %C
  
  # You can use any conversion specifier in this option except %C. Date and time
  
  # values are from the timestamp of the first image in the current event.
  
  # Default: %Y%m%d%H%M%S
  
  # The idea is that %C can be used filenames and text_left/right for creating
  
  # a unique identifier for each event.
  
  text_event %Y%m%d%H%M%S
  
  
  
  # Draw characters at twice normal size on images. (default: off)
  
  text_double on
  
  
  
  
  
  # Text to include in a JPEG EXIF comment
  
  # May be any text, including conversion specifiers.
  
  # The EXIF timestamp is included independent of this text.
  
  ;exif_text %i%J/%K%L
  
  
  
  ############################################################
  
  # Target Directories and filenames For Images And Films
  
  # For the options snapshot_, picture_, movie_ and timelapse_filename
  
  # you can use conversion specifiers
  
  # %Y = year, %m = month, %d = date,
  
  # %H = hour, %M = minute, %S = second,
  
  # %v = event, %q = frame number, %t = thread (camera) number,
  
  # %D = changed pixels, %N = noise level,
  
  # %i and %J = width and height of motion area,
  
  # %K and %L = X and Y coordinates of motion center
  
  # %C = value defined by text_event
  
  # Quotation marks round string are allowed.
  
  ############################################################
  
  
  
  # Target base directory for pictures and films
  
  # Recommended to use absolute path. (Default: current working directory)
  
  target_dir /home/pi
  
  
  
  # File path for snapshots (jpeg or ppm) relative to target_dir
  
  # Default: %v-%Y%m%d%H%M%S-snapshot
  
  # Default value is equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
  
  # File extension .jpg or .ppm is automatically added so do not include this.
  
  # Note: A symbolic link called lastsnap.jpg created in the target_dir will always
  
  # point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
  
  snapshot_filename %v-%Y%m%d%H%M%S-snapshot
  
  
  
  # File path for motion triggered images (jpeg or ppm) relative to target_dir
  
  # Default: %v-%Y%m%d%H%M%S-%q
  
  # Default value is equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
  
  # File extension .jpg or .ppm is automatically added so do not include this
  
  # Set to 'preview' together with best-preview feature enables special naming
  
  # convention for preview shots. See motion guide for details
  
  picture_filename %v-%Y%m%d%H%M%S-%q
  
  
  
  # File path for motion triggered ffmpeg films (movies) relative to target_dir
  
  # Default: %v-%Y%m%d%H%M%S
  
  # Default value is equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
  
  # File extension .mpg or .avi is automatically added so do not include this
  
  # This option was previously called ffmpeg_filename
  
  movie_filename %v-%Y%m%d%H%M%S
  
  
  
  # File path for timelapse movies relative to target_dir
  
  # Default: %Y%m%d-timelapse
  
  # Default value is near equivalent to legacy oldlayout option
  
  # For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
  
  # File extension .mpg is automatically added so do not include this
  
  timelapse_filename %Y%m%d-timelapse
  
  
  
  ############################################################
  
  # Global Network Options
  
  ############################################################
  
  # Enable or disable IPV6 for http control and stream (default: off )
  
  ipv6_enabled off
  
  
  
  ############################################################
  
  # Live Stream Server
  
  ############################################################
  
  
  
  # The mini-http server listens to this port for requests (default: 0 = disabled)
  
  stream_port 8080
  
  
  
  # Quality of the jpeg (in percent) images produced (default: 50)
  
  stream_quality 50
  
  
  
  # Output frames at 1 fps when no motion is detected and increase to the
  
  # rate given by stream_maxrate when motion is detected (default: off)
  
  stream_motion on
  
  
  
  # Maximum framerate for stream streams (default: 1)
  
  stream_maxrate 4
  
  
  
  # Restrict stream connections to localhost only (default: on)
  
  stream_localhost off
  
  
  
  # Limits the number of images per connection (default: 0 = unlimited)
  
  # Number can be defined by multiplying actual stream rate by desired number of seconds
  
  # Actual stream rate is the smallest of the numbers framerate and stream_maxrate
  
  stream_limit 0
  
  
  
  # Set the authentication method (default: 0)
  
  # 0 = disabled
  
  # 1 = Basic authentication
  
  # 2 = MD5 digest (the safer authentication)
  
  stream_auth_method 0
  
  
  
  # Authentication for the stream. Syntax username:password
  
  # Default: not defined (Disabled)
  
  ; stream_authentication username:password
  
  
  
  
  
  ############################################################
  
  # HTTP Based Control
  
  ############################################################
  
  
  
  # TCP/IP port for the http server to listen on (default: 0 = disabled)
  
  webcontrol_port 8081
  
  
  
  # Restrict control connections to localhost only (default: on)
  
  webcontrol_localhost off
  
  
  
  # Output for http server, select off to choose raw text plain (default: on)
  
  webcontrol_html_output on
  
  
  
  # Authentication for the http based control. Syntax username:password
  
  # Default: not defined (Disabled)
  
  ; webcontrol_authentication username:password
  
  
  
  
  
  ############################################################
  
  # Tracking (Pan/Tilt)
  
  #############################################################
  
  
  
  # Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo, 6=servo)
  
  # The generic type enables the definition of motion center and motion size to
  
  # be used with the conversion specifiers for options like on_motion_detected
  
  track_type 0
  
  
  
  # Enable auto tracking (default: off)
  
  track_auto off
  
  
  
  # Serial port of motor (default: none)
  
  ;track_port /dev/ttyS0
  
  
  
  # Motor number for x-axis (default: 0)
  
  ;track_motorx 0
  
  
  
  # Set motorx reverse (default: 0)
  
  ;track_motorx_reverse 0
  
  
  
  # Motor number for y-axis (default: 0)
  
  ;track_motory 1
  
  
  
  # Set motory reverse (default: 0)
  
  ;track_motory_reverse 0
  
  
  
  # Maximum value on x-axis (default: 0)
  
  ;track_maxx 200
  
  
  
  # Minimum value on x-axis (default: 0)
  
  ;track_minx 50
  
  
  
  # Maximum value on y-axis (default: 0)
  
  ;track_maxy 200
  
  
  
  # Minimum value on y-axis (default: 0)
  
  ;track_miny 50
  
  
  
  # Center value on x-axis (default: 0)
  
  ;track_homex 128
  
  
  
  # Center value on y-axis (default: 0)
  
  ;track_homey 128
  
  
  
  # ID of an iomojo camera if used (default: 0)
  
  track_iomojo_id 0
  
  
  
  # Angle in degrees the camera moves per step on the X-axis
  
  # with auto-track (default: 10)
  
  # Currently only used with pwc type cameras
  
  track_step_angle_x 10
  
  
  
  [...]

• Cannot play local RTP stream

  24 janvier 2020, par gdogg371

  I have been struggling along with this issue now for a while, but am making good progress. I now have a 4k transport stream running using the below command line arguments for VLC :

  vlc --ffmpeg-hw --avcodec-hw=any dshow:// :dshow-vdev="Video (00 Pro Capture HDMI 4K+)" :dshow-adev="Audio (2- 00 Pro Capture HDMI 4K+)" :dshow-threads=8 :dshow-aspect-ratio=16\:9 :dshow-size="3840x2160" :dshow-pixel_format=yuv444p16le :dshow-tune=film :dshow-preset=lossless :dshow-profile=main10 show-vcodec=hevc_nvenc :dshow-fps=50 :dshow-crf=0 :dshow-acodec=mp4a :dshow-stereo-mode=5 :dshow-force-surround-sound=0 :dshow-ab=128 :dshow-samplerate=44100 :no-dshow-config :live-caching=3000 --sout "#transcode{venc=ffmpeg,vcodec=mpgv,threads=8,aspect=16:9,width=3840,height=2160,fps=50,acodec=a52,ab=1500,channels=6,samplerate=48000,soverlay}:rtp{dst=239.255.0.1,port=5004,mux=ts}"

  I can access the rtp stream on the same PC as I am running the stream from with the below :

  vlc -vvv rtp://@239.255.0.1:5004

  However, if I try the same commands on a different computer, connected via Ethernet to the same network, the client VLC session just hangs. I have included the log below with the verbosity set to debug. Can anyone spot anything in here suggesting why the stream won’t play ?

  -- logger module started --
  
  main debug: VLC media player - 3.0.8 Vetinari
  
  main debug: Copyright © 1996-2019 the VideoLAN team
  
  main debug: revision 3.0.8-0-gf350b6b5a7
  
  main debug: configured with ../extras/package/win32/../../../configure  '--enable-update-check' '--enable-lua' '--enable-faad' '--enable-flac' '--enable-theora' '--enable-avcodec' '--enable-merge-ffmpeg' '--enable-dca' '--enable-mpc' '--enable-libass' '--enable-schroedinger' '--enable-realrtsp' '--enable-live555' '--enable-dvdread' '--enable-shout' '--enable-goom' '--enable-caca' '--enable-qt' '--enable-skins2' '--enable-sse' '--enable-mmx' '--enable-libcddb' '--enable-zvbi' '--disable-telx' '--enable-nls' '--host=x86_64-w64-mingw32' '--with-breakpad=https://win.crashes.videolan.org' 'host_alias=x86_64-w64-mingw32' 'PKG_CONFIG_LIBDIR=/home/jenkins/workspace/vlc-release/windows/vlc-release-win32-x64/contrib/x86_64-w64-mingw32/lib/pkgconfig'
  
  main debug: using multimedia timers as clock source
  
  main debug:  min period: 1 ms, max period: 1000000 ms
  
  main debug: searching plug-in modules
  
  main debug: loading plugins cache file D:\VLC\plugins\plugins.dat
  
  main debug: recursively browsing `D:\VLC\plugins'
  
  main error: stale plugins cache: modified D:\VLC\plugins\access\libaccess_concat_plugin.dll
  
  main error: stale plugins cache: modified D:\VLC\plugins\access\libaccess_imem_plugin.dll
  
  ....
  
  ....
  
  ....
  
  main error: stale plugins cache: modified D:\VLC\plugins\visualization\libgoom_plugin.dll
  
  main error: stale plugins cache: modified D:\VLC\plugins\visualization\libprojectm_plugin.dll
  
  main error: stale plugins cache: modified D:\VLC\plugins\visualization\libvisual_plugin.dll
  
  main debug: plug-ins loaded: 494 modules
  
  main debug: opening config file (C:\Users\cg371\AppData\Roaming\vlc\vlcrc)
  
  main debug: looking for logger module matching "any": 2 candidates
  
  file debug: opening logfile `D:\VLC\Log.txt'
  
  main debug: using logger module "file"
  
  main debug: translation test: code is "en_GB"
  
  main debug: looking for keystore module matching "memory": 3 candidates
  
  main debug: using keystore module "memory"
  
  main debug: CPU has capabilities MMX MMXEXT SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 FPU 
  
  main debug: Creating an input for 'Media Library'
  
  main debug: Input is a meta file: disabling unneeded options
  
  main debug: using timeshift granularity of 50 MiB
  
  main debug: using timeshift path: C:\Users\cg371\AppData\Local\Temp
  
  main debug: `file/directory:///C:/Users/cg371/AppData/Roaming/vlc/ml.xspf' gives access `file' demux `directory' path `/C:/Users/cg371/AppData/Roaming/vlc/ml.xspf'
  
  main debug: creating demux: access='file' demux='directory' location='/C:/Users/cg371/AppData/Roaming/vlc/ml.xspf' file='C:\Users\cg371\AppData\Roaming\vlc\ml.xspf'
  
  main debug: looking for access_demux module matching "file": 15 candidates
  
  main debug: no access_demux modules matched
  
  main debug: creating access: file:///C:/Users/cg371/AppData/Roaming/vlc/ml.xspf
  
  main debug:  (path: C:\Users\cg371\AppData\Roaming\vlc\ml.xspf)
  
  main debug: looking for access module matching "file": 26 candidates
  
  main debug: using access module "filesystem"
  
  main debug: looking for stream_filter module matching "prefetch,cache_read": 24 candidates
  
  cache_read debug: Using stream method for AStream*
  
  cache_read debug: starting pre-buffering
  
  cache_read debug: received first data after 1 ms
  
  cache_read debug: pre-buffering done 304 bytes in 0s - 296 KiB/s
  
  main debug: using stream_filter module "cache_read"
  
  main debug: looking for stream_filter module matching "any": 24 candidates
  
  playlist debug: using XSPF playlist reader
  
  main debug: using stream_filter module "playlist"
  
  main debug: stream filter added to 00000266f6927700
  
  main debug: looking for stream_filter module matching "any": 24 candidates
  
  main debug: no stream_filter modules matched
  
  main debug: looking for stream_directory module matching "any": 1 candidates
  
  main debug: no stream_directory modules matched
  
  main debug: attachment of directory-extractor failed for file:///C:/Users/cg371/AppData/Roaming/vlc/ml.xspf
  
  main debug: looking for stream_filter module matching "record": 24 candidates
  
  main debug: using stream_filter module "record"
  
  main debug: creating demux: access='file' demux='directory' location='/C:/Users/cg371/AppData/Roaming/vlc/ml.xspf' file='C:\Users\cg371\AppData\Roaming\vlc\ml.xspf'
  
  main debug: looking for demux module matching "directory": 55 candidates
  
  main debug: using demux module "directory"
  
  main debug: looking for meta reader module matching "any": 2 candidates
  
  lua debug: Trying Lua scripts in C:\Users\cg371\AppData\Roaming\vlc\lua\meta\reader
  
  lua debug: Trying Lua scripts in D:\VLC\lua\meta\reader
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\reader\filename.luac
  
  main debug: no meta reader modules matched
  
  main debug: `file/directory:///C:/Users/cg371/AppData/Roaming/vlc/ml.xspf' successfully opened
  
  main debug: looking for xml reader module matching "any": 1 candidates
  
  main debug: using xml reader module "xml"
  
  main debug: EOF reached
  
  main debug: removing module "directory"
  
  main debug: removing module "record"
  
  main debug: removing module "playlist"
  
  main debug: removing module "cache_read"
  
  main debug: removing module "filesystem"
  
  main debug: creating audio output
  
  main debug: looking for audio output module matching "any": 6 candidates
  
  mmdevice debug: using default device
  
  mmdevice debug: display name changed: VLC media player (LibVLC 3.0.8)
  
  mmdevice debug: version 2 session control unavailable
  
  mmdevice debug: volume from -65.250000 dB to +0.000000 dB with 0.031250 dB increments
  
  main debug: using audio output module "mmdevice"
  
  main debug: keeping audio output
  
  main debug: looking for interface module matching "hotkeys,none": 16 candidates
  
  main debug: using interface module "hotkeys"
  
  main debug: looking for interface module matching "globalhotkeys,none": 16 candidates
  
  main debug: using interface module "win32"
  
  main: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
  
  main debug: looking for interface module matching "any": 16 candidates
  
  main debug: looking for extension module matching "any": 1 candidates
  
  lua debug: Opening Lua Extension module
  
  lua debug: Trying Lua scripts in C:\Users\cg371\AppData\Roaming\vlc\lua\extensions
  
  lua debug: Trying Lua scripts in D:\VLC\lua\extensions
  
  lua debug: Trying Lua playlist script D:\VLC\lua\extensions\VLSub.luac
  
  lua debug: Scanning Lua script D:\VLC\lua\extensions\VLSub.luac
  
  lua debug: Script D:\VLC\lua\extensions\VLSub.luac has the following capability flags: 0x5
  
  main debug: using extension module "lua"
  
  main debug: using interface module "qt"
  
  main debug: processing request item: null, node: Playlist, skip: 0
  
  main debug: rebuilding array of current - root Playlist
  
  main debug: rebuild done - 1 items, index -1
  
  main debug: starting playback of new item
  
  main debug: resyncing on rtp://239.255.0.1:5004
  
  main debug: rtp://239.255.0.1:5004 is at 0
  
  main debug: creating new input thread
  
  main debug: Creating an input for 'rtp://239.255.0.1:5004'
  
  main debug: requesting art for new input thread
  
  main debug: using timeshift granularity of 50 MiB
  
  main debug: using timeshift path: C:\Users\cg371\AppData\Local\Temp
  
  main debug: `rtp://@239.255.0.1:5004' gives access `rtp' demux `any' path `@239.255.0.1:5004'
  
  main debug: creating demux: access='rtp' demux='any' location='@239.255.0.1:5004' file='\\@239.255.0.1:5004'
  
  main debug: looking for access_demux module matching "rtp": 15 candidates
  
  main debug: net: opening 239.255.0.1 datagram port 5004
  
  qt debug: IM: Setting an input
  
  main debug: looking for meta fetcher module matching "any": 1 candidates
  
  lua debug: Trying Lua scripts in C:\Users\cg371\AppData\Roaming\vlc\lua\meta\fetcher
  
  lua debug: Trying Lua scripts in D:\VLC\lua\meta\fetcher
  
  main debug: no meta fetcher modules matched
  
  main debug: looking for art finder module matching "any": 2 candidates
  
  lua debug: Trying Lua scripts in C:\Users\cg371\AppData\Roaming\vlc\lua\meta\art
  
  lua debug: Trying Lua scripts in D:\VLC\lua\meta\art
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\00_musicbrainz.luac
  
  lua debug: skipping script (unmatched scope) D:\VLC\lua\meta\art\00_musicbrainz.luac
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\01_googleimage.luac
  
  lua debug: skipping script (unmatched scope) D:\VLC\lua\meta\art\01_googleimage.luac
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\02_frenchtv.luac
  
  lua debug: skipping script (unmatched scope) D:\VLC\lua\meta\art\02_frenchtv.luac
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\03_lastfm.luac
  
  main debug: using access_demux module "rtp"
  
  main debug: looking for meta reader module matching "any": 2 candidates
  
  lua debug: Trying Lua scripts in C:\Users\cg371\AppData\Roaming\vlc\lua\meta\reader
  
  lua debug: Trying Lua scripts in D:\VLC\lua\meta\reader
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\reader\filename.luac
  
  lua debug: skipping script (unmatched scope) D:\VLC\lua\meta\art\03_lastfm.luac
  
  main debug: no art finder modules matched
  
  main debug: no meta reader modules matched
  
  main debug: `rtp://@239.255.0.1:5004' successfully opened
  
  main debug: looking for meta fetcher module matching "any": 1 candidates
  
  lua debug: Trying Lua scripts in C:\Users\cg371\AppData\Roaming\vlc\lua\meta\fetcher
  
  lua debug: Trying Lua scripts in D:\VLC\lua\meta\fetcher
  
  main debug: no meta fetcher modules matched
  
  main debug: looking for art finder module matching "any": 2 candidates
  
  lua debug: Trying Lua scripts in C:\Users\cg371\AppData\Roaming\vlc\lua\meta\art
  
  lua debug: Trying Lua scripts in D:\VLC\lua\meta\art
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\00_musicbrainz.luac
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\01_googleimage.luac
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\02_frenchtv.luac
  
  lua debug: Trying Lua playlist script D:\VLC\lua\meta\art\03_lastfm.luac
  
  main debug: no art finder modules matched
  
  main debug: exiting
  
  main debug: exiting
  
  main debug: no exit handler
  
  main debug: removing all interfaces
  
  main debug: removing module "qt"
  
  main debug: deactivating the playlist
  
  main debug: incoming request - stopping current input
  
  main debug: removing module "rtp"
  
  main debug: dead input
  
  main debug: nothing to play
  
  main debug: removing module "mmdevice"
  
  qt debug: requesting exit...
  
  qt debug: waiting for UI thread...
  
  qt debug: IM: Deleting the input
  
  qt debug: QApp exec() finished
  
  qt debug: Video is not needed anymore
  
  qt debug: Killing extension dialog provider
  
  qt debug: ExtensionsDialogProvider is quitting...
  
  main debug: removing module "lua"
  
  main debug: removing module "win32"
  
  main debug: removing module "hotkeys"
  
  main debug: destroying
  
  main debug: saving media library to file C:\Users\cg371\AppData\Roaming\vlc\ml.xspf.tmp14968
  
  main debug: looking for playlist export module matching "export-xspf": 4 candidates
  
  main debug: using playlist export module "export"
  
  main debug: removing module "export"
  
  main debug: deleting item `Media Library'
  
  main debug: deleting item `rtp://239.255.0.1:5004'
  
  main debug: deleting item `Playlist'
  
  main debug: removing module "memory"
  
  -- logger module stopped --

• Revision 35677 : ajout d’un parametre optionnel "retour" au formulaire spipicious

  27 février 2010, par brunobergot@… — Log

  ajout d’un parametre optionnel "retour" au formulaire spipicious