Recherche avancée

Sur d’autres sites (2327)

• aacenc : remove support for AAC Main profile

  8 février, par Lynne

  aacenc : remove support for AAC Main profile
  The Main profile of AAC is... terrible.
  
  It enables the use of delta coding across coefficients of two frames
  
  to try to increase compression, and it enabled one more pole for TNS
  
  filters.
  What the AAC authors failed to take into account were basic
  
  mathematics, as MDCT leakage (e.g. the spread of each frequency when
  
  represented in a discrete spectrum) is significant in most audio codecs.
  
  This leads to huge variations between each frame, basically rendering
  
  prediction completely pointless.
  In fact, enabling AAC-Main prediction does not, in general, even recoup
  
  the metadata losses from signalling the profile and prediction properties
  
  in the first place. So you lose efficiency by using AAC Main.
  The rumor is that it was put in the AAC spec for patent reasons, though
  
  patent-wise, it has about as much use as a patent for a bicycle designed
  
  for use by snakes.
  The only other thing AAC Main changes is it permits 3-pole TNS filters.
  
  When AAC's bands are absolutely tiny, except for very high frequency bands,
  
  where you're likely to use PNS instead.
  Just get rid of it.
  

  • [DH] doc/encoders.texi
  • [DH] libavcodec/Makefile
  • [DH] libavcodec/aaccoder.c
  • [DH] libavcodec/aacenc.c
  • [DH] libavcodec/aacenc.h
  • [DH] libavcodec/aacenc_pred.c
  • [DH] libavcodec/aacenc_pred.h
  • [DH] libavcodec/aacenc_tns.c
  • [DH] libavcodec/aacenctab.h
  • [DH] tests/fate/aac.mak

• MPD doesnt load ffmpeg as decoder

  10 août 2022, par dmSherazi

  I am using openwrt 21.2.3 and mpd on it. I have compile mpd full and libffmpeg full as well as ffmpeg-full packages.
But my mpd wont load ffmpeg as decoder. Also tried to force it by adding decoder { plugin “ffmpeg” enabled “no” }” line to /etc/mpd.conf

  


  below is my mpd.conf

  


  log_file "syslog"

bind_to_address "127.0.0.1"
bind_to_address "192.168.1.16"

input {
    plugin          "curl"
}

audio_output {
    type            "alsa"
    name            "sun4icodec"
    device          "plug:dmix"
    mixer_control   "Power Amplifier"
}

decoder {
     plugin  "ffmpeg"
     enabled  "yes"
}


  


  the mpd —version output is as follows

  


  Music Player Daemon 0.21.26 (v21.02.3)
Copyright 2003-2007 Warren Dukes <warren.dukes@gmail.com>
Copyright 2008-2018 Max Kellermann <max.kellermann@gmail.com>
This is free software; see the source for copying conditions.  There is NO
warranty; not even MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Database plugins:
 simple proxy upnp

Storage plugins:
 local curl


Decoders plugins:
 [mad] mp3 mp2
 [vorbis] ogg oga
 [oggflac] ogg oga
 [flac] flac
 [opus] opus ogg oga
 [faad] aac
 [pcm]

Filters:


Tag plugins:
 id3tag

Output plugins:
 shout null fifo pipe alsa pulse httpd recorder

Encoder plugins:
 null opus wave flac

Input plugins:
 file alsa curl mms

Playlist plugins:
 extm3u m3u pls xspf asx rss soundcloud flac cue embcue

Protocols:
 file:// alsa:// http:// https:// mms:// mmsh:// mmst:// mmsu://

Other features:
 epoll iconv inotify ipv6 tcp un


  


  ideally it should have something like this

  


  
Decoders plugins:
 [dsdiff] dff
 [dsf] dsf
 [ffmpeg] 16sv 3g2 3gp 4xm 8svx aa3 aac ac3 adx afc aif aifc aiff al alaw amr anim apc ape asf atrac au aud avi avm2 avs bap bfi c93 cak cin cmv cpk daud dct divx dts dv dvd dxa eac3 film flac flc fli fll flx flv g726 gsm gxf iss m1v m2v m2t m2ts m4a m4b m4v mad mj2 mjpeg mjpg mka mkv mlp mm mmf mov mp+ mp1 mp2 mp3 mp4 mpc mpeg mpg mpga mpp mpu mve mvi mxf nc nsv nut nuv oga ogm ogv ogx oma ogg omg opus psp pva qcp qt r3d ra ram rl2 rm rmvb roq rpl rvc shn smk snd sol son spx str swf tak tgi tgq tgv thp ts tsp tta xa xvid uv uv2 vb vid vob voc vp6 vmd wav webm wma wmv wsaud wsvga wv wve
 [pcm]

Filters:




  


  here are logs from mpd deamon

  


  Output of ffmpeg command

  


  
Mon Jul 25 09:40:30 2022 daemon.err mpd[1969]: exception: Error in /etc/mpd.conf line 17; Unknown tokens after '{'
Mon Jul 25 09:44:23 2022 daemon.debug mpd: vorbis: Xiph.Org libVorbis 1.3.7
Mon Jul 25 09:44:23 2022 daemon.debug mpd: opus: libopus 1.3.1-fixed
Mon Jul 25 09:44:23 2022 daemon.debug mpd: curl: version 7.82.0
Mon Jul 25 09:44:23 2022 daemon.debug mpd: curl: with mbedTLS/2.16.12


  


  ffmpeg version 4.3.3 Copyright (c) 2000-2021 the FFmpeg developers
  built with gcc 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)
  configuration: --enable-cross-compile --cross-prefix=arm-openwrt-linux-muslgnueabi- --arch=arm --cpu=cortex-a7 --target-os=linux --prefix=/usr --pkg-config=pkg-config --enable-shared --enable-static --enable-pthreads --enable-zlib --disable-doc --disable-debug --disable-lzma --disable-vaapi --disable-vdpau --disable-outdevs --disable-runtime-cpudetect --enable-lto --enable-vfp --enable-neon --enable-vfp --disable-x86asm --enable-hardcoded-tables --enable-gpl --enable-version3 --enable-nonfree --disable-swscale --disable-everything --enable-encoder=ac3 --enable-encoder=jpegls --enable-encoder=mpeg1video --enable-encoder=mpeg2video --enable-encoder=pcm_s16be --enable-encoder=pcm_s16le --enable-encoder=png --enable-encoder=vorbis --enable-encoder=zlib --enable-decoder=aac --enable-decoder=ac3 --enable-decoder=alac --enable-decoder=amrnb --enable-decoder=amrwb --enable-decoder=ape --enable-decoder=flac --enable-decoder=jpegls --enable-decoder=mp2 --enable-decoder=mp3 --enable-decoder=mpeg1video --enable-decoder=mpeg2video --enable-decoder=mpeg4 --enable-decoder=mpegvideo --enable-decoder=mpc7 --enable-decoder=mpc8 --enable-decoder=pcm_s16be --enable-decoder=pcm_s16le --enable-decoder=png --enable-decoder=vorbis --enable-decoder=wavpack --enable-decoder=wmav1 --enable-decoder=wmav2 --enable-decoder=zlib --enable-muxer=ac3 --enable-muxer=mp3 --enable-muxer=mp4 --enable-muxer=mpeg1video --enable-muxer=mpeg2video --enable-muxer=mpegts --enable-muxer=ogg --enable-muxer=rtp --enable-demuxer=aac --enable-demuxer=ac3 --enable-demuxer=amr --enable-demuxer=ape --enable-demuxer=avi --enable-demuxer=flac --enable-demuxer=matroska --enable-demuxer=mov --enable-demuxer=mp3 --enable-demuxer=mpegps --enable-demuxer=mpegts --enable-demuxer=mpegvideo --enable-demuxer=mpc --enable-demuxer=mpc8 --enable-demuxer=ogg --enable-demuxer=rm --enable-demuxer=rtsp --enable-demuxer=rtp --enable-demuxer=sdp --enable-demuxer=wav --enable-demuxer=wv --enable-parser=aac --enable-parser=flac --enable-parser=ac3 --enable-parser=mpegaudio --enable-parser=mpeg4video --enable-parser=mpegvideo --enable-protocol=file --enable-protocol=http --enable-protocol=icecast --enable-protocol=pipe --enable-protocol=rtp --enable-protocol=tcp --enable-protocol=udp --enable-decoder=adpcm_ima_wav --enable-decoder=adpcm_ima_qt --enable-decoder=adpcm_ms --enable-libfdk-aac --enable-encoder=libfdk_aac --enable-libmp3lame --enable-encoder=libmp3lame --enable-libopus --enable-decoder=libopus --enable-encoder=libopus --enable-libshine --enable-encoder=libshine --disable-postproc
  libavutil      56. 51.100 / 56. 51.100
  libavcodec     58. 91.100 / 58. 91.100
  libavformat    58. 45.100 / 58. 45.100
  libavdevice    58. 10.100 / 58. 10.100
  libavfilter     7. 85.100 /  7. 85.100
  libswresample   3.  7.100 /  3.  7.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...


  


• FFmpeg : How to convert vertical/horizontal video (any size) with black sides, to 1080x1350 vertical video with blurred background sides/bottom-top

  12 octobre 2023, par devweb

  i've been trying to make a ffmpeg 'filter_complex' code to make what i need but i can't, i've used some codes here on stack but non works for what i need, each is like for a different size/dimension.
I'm trying to make videos like Instagram posts (tallest allowed) : 1080 x 1350

  


  Bassically, horizontal videos with blurred sides or bottom-top.

  


  Any help will be awesome, thanks !

  


  This is the principal which i tried

  


  Something like this :

  


  Example 1
Example 2

  


  Here some codes i tried to worked with and changing stuff :
filter_complex='[0:v]scale=1080*2:1350*2,boxblur=luma_radius=min(h\\,w)/20:luma_power=1:chroma_radius=min(cw\\,ch)/20:chroma_power=1[bg];[0:v]scale=-1:1080[ov];[bg][ov]overlay=(W-w)/2:(H-h)/2,crop=w=1080:h=1350'

  


  filter_complex='[0:v]scale=ih*5/4:-1,crop=h=iw*4/5,gblur=sigma=20[blurred];[blurred][0:v]overlay=(main_w-overlay_w)/2:(main_h-overlay_h)/2'

  


  filter_complex='[0:v]scale=1080:1350,setsar=1,gblur=sigma=20[blurred];[blurred][0:v]overlay=(main_w-overlay_w)/2:(main_h-overlay_h)/2'