Recherche avancée

Sur d’autres sites (3619)

• FFMPEG error while converting flv1 (flv) -> h264 (libx264)

  3 juillet 2016, par Kalivarapu

  I am trying to covert flv format video to h264 codec with mp4 format video, but am facing the following error :

  Command I executed :

  ffmpeg -i input_video.flv -c:v libx264 output.mp4

  Error :
  Error while opening encoder for output stream #0:1 - maybe incorrect parameters such as bit_rate, rate, width or height

  Logs :

  ffmpeg version 2.7.2 Copyright (c) 2000-2015 the FFmpeg developers
  
    built with Apple LLVM version 6.1.0 (clang-602.0.53) (based on LLVM 3.6.0svn)
  
    configuration: --prefix=/usr/local/Cellar/ffmpeg/2.7.2 --enable-shared --enable-pthreads --enable-gpl --enable-version3 --enable-hardcoded-tables --enable-avresample --enable-opencl --cc=clang --host-cflags= --host-ldflags= --enable-libx264 --enable-libmp3lame --enable-libvo-aacenc --enable-libxvid --enable-vda
  
    libavutil      54. 27.100 / 54. 27.100
  
    libavcodec     56. 41.100 / 56. 41.100
  
    libavformat    56. 36.100 / 56. 36.100
  
    libavdevice    56.  4.100 / 56.  4.100
  
    libavfilter     5. 16.101 /  5. 16.101
  
    libavresample   2.  1.  0 /  2.  1.  0
  
    libswscale      3.  1.101 /  3.  1.101
  
    libswresample   1.  2.100 /  1.  2.100
  
    libpostproc    53.  3.100 / 53.  3.100
  
  Input #0, flv, from 'input.flv':
  
    Metadata:
  
      encoder         : Lavf53.24.2
  
    Duration: 00:00:53.32, start: 0.000000, bitrate: 787 kb/s
  
      Stream #0:0: Video: flv1, yuv420p, 320x240, 500 kb/s, 25 fps, 25 tbr, 1k tbn, 1k tbc
  
      Stream #0:1: Audio: aac (LC), 48000 Hz, 5.1, fltp, 384 kb/s
  
  [libx264 @ 0x7ff885000c00] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
  
  [libx264 @ 0x7ff885000c00] profile High, level 1.3
  
  [libx264 @ 0x7ff885000c00] 264 - core 144 r2533 c8a773e - H.264/MPEG-4 AVC codec - Copyleft 2003-2015 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
  
  [libvo_aacenc @ 0x7ff885001e00] Unable to set encoding parameters
  
  Output #0, mp4, to 'output1.mp4':
  
    Metadata:
  
      encoder         : Lavf53.24.2
  
      Stream #0:0: Video: h264 (libx264), yuv420p, 320x240, q=-1--1, 25 fps, 25 tbn, 25 tbc
  
      Metadata:
  
        encoder         : Lavc56.41.100 libx264
  
      Stream #0:1: Audio: aac, 0 channels, 128 kb/s
  
      Metadata:
  
        encoder         : Lavc56.41.100 libvo_aacenc
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (flv1 (flv) -> h264 (libx264))
  
    Stream #0:1 -> #0:1 (aac (native) -> aac (libvo_aacenc))
  
  Error while opening encoder for output stream #0:1 - maybe incorrect parameters such as bit_rate, rate, width or height

  What could be the reason for this ?

• Unable to record video without audio in windows using ffmpeg

  20 janvier 2017, par Syam Pradeep

  I am using ffmpeg to record the desktop on windows.Everything works fine if i play the audio in PC,when i try to record without playing any audio i am not able to get the desired output file.

  Used the following command to start the recording

  "-f gdigrab -framerate 10 -i desktop -f dshow -i audio="virtual-audio-capturer" -ac 2 -ar 44100 -acodec aac -ab 192k -pix_fmt yuv420p -r 30 -vcodec h264 -crf 27 -preset ultrafast -f mp4 Recording_2017-18-1--18-42-12.mp4"

  Got the following output in cmd line

  [gdigrab @ 037abaa0] Capturing whole desktop as 1600x900x32 at (0,0)
  
  [gdigrab @ 037abaa0] Stream #0: not enough frames to estimate rate; consider increasing probesize
  
  Input #0, gdigrab, from 'desktop':
  
    Duration: N/A, start: 1484893527.269157, bitrate: 460804 kb/s
  
      Stream #0:0: Video: bmp, bgra, 1600x900, 460804 kb/s, 10 fps, 1000k tbr, 1000k tbn, 1000k tbc
  
  Guessed Channel Layout for Input Stream #1.0 : stereo
  
  Input #1, dshow, from 'audio=virtual-audio-capturer:':
  
    Duration: N/A, bitrate: N/A
  
      Stream #1:0: Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s
  
  [libx264 @ 052e50a0] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 AVX2 LZCNT BMI2
  
  [libx264 @ 052e50a0] profile Constrained Baseline, level 4.0
  
  [libx264 @ 052e50a0] 264 - core 148 r2744 b97ae06 - H.264/MPEG-4 AVC codec - Copyleft 2003-2016 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=27.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=0
  
  Output #0, mp4, to 'fileName.mp4':
  
    Metadata:
  
      encoder         : Lavf57.61.100
  
      Stream #0:0: Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 1600x900, q=-1--1, 30 fps, 15360 tbn, 30 tbc
  
      Metadata:
  
        encoder         : Lavc57.70.100 libx264
  
      Side data:
  
        cpb: bitrate max/min/avg: 0/0/0 buffer size: 0 vbv_delay: -1
  
      Stream #0:1: Audio: aac (LC) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, fltp, 192 kb/s
  
      Metadata:
  
        encoder         : Lavc57.70.100 aac
  
  Stream mapping:
  
    Stream #0:0 -> #0:0 (bmp (native) -> h264 (libx264))
  
    Stream #1:0 -> #0:1 (pcm_s16le (native) -> aac (native))
  
  Press [q] to stop, [?] for help
  
  frame=    0 fps=0.0 q=0.0 Lsize=       0kB time=00:00:00.00 bitrate=N/A speed=N/A
  
  video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown
  
  [aac @ 052e7360] Qavg: nan
  
  Exiting normally, received signal 2.

  The output file is 1 kb.

• ffplay does not play an RTMP stream on VM with Ubuntu

  7 novembre 2020, par PiotrKulesza

  I am trying to run my RTMP stream on a VM with Ubuntu installed. The stream starts on the host computer from the obs program.

  


  Obs stream settings :

  


  Server: rtmp://192.168.56.102:1935/show
Stream key: stream


  


  Obs sends the stream to the nginx server on the VM with Ubuntu installed.

  


  RTMP configuration in nginx.conf

  


  rtmp {
    server {
        listen 1935; # Listen on standard RTMP port
        chunk_size 4000;

        application show {
            live on;
            # Turn on HLS
            hls on;
            hls_path /mnt/hls/;
            hls_fragment 3;
            hls_playlist_length 60;
            # disable consuming the stream from nginx as rtmp
            deny play all;
        }
    }
}


  


  When I start the stream it connects because it shows up in netstat.

  


  Output from netstat :

  


  Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State      
tcp        0      0 webapp-VirtualBox:1935  192.168.56.1:56924      ESTABLISHED


  


  But when I try to play stream with ffplay, it doesn't work. I am getting the following error.

  


  ffplay version 4.2.4-1ubuntu0.1 Copyright (c) 2003-2020 the FFmpeg developers
  built with gcc 9 (Ubuntu 9.3.0-10ubuntu2)
  configuration: --prefix=/usr --extra-version=1ubuntu0.1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-nvenc --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
  libavutil      56. 31.100 / 56. 31.100
  libavcodec     58. 54.100 / 58. 54.100
  libavformat    58. 29.100 / 58. 29.100
  libavdevice    58.  8.100 / 58.  8.100
  libavfilter     7. 57.100 /  7. 57.100
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  5.100 /  5.  5.100
  libswresample   3.  5.100 /  3.  5.100
  libpostproc    55.  5.100 / 55.  5.100
rtmp://192.168.56.102:1935/show/stream: Broken pipeq=    0B f=0/0 


  


  I have tried the following commands to play a stream but each one gives the same error.

  


  ffplay -i rtmp://192.168.56.102:1935/show/stream
ffplay -i rtmp://webapp-VirtualBox:1935/show/stream
ffplay -i rtmp://localhost:1935/show/stream


  


  I also tried VLC but this program also didn't work.
Can anyone tell me what I am doing wrong or forgot to play this stream ?